Used Micromill Micromill Vmc 1300 for sale (2,554)

Condition: good (used), Year of construction: 1983, functionality: fully functional, THOROUGHLY CLEANED AND REPAINTED MACHINE Working width 1,300 mm Roller diameter 149 mm Feed rate 22 m/min Max. pass height approx. 100 mm Fpedpfx Apezxr Uhs Djn Mobile version with 2 rollers on the rear machine frame Connection data: 400 V, 50 Hz, 3-phase, N

Condition: excellent (used), Year of construction: 2015, KRAUSS MAFFEI KM 1300-12000 MX injection molding machine Year of manufacture: 2015 Equipment: Krauss Maffei LRX 350 linear robot Clamping unit Clamping force: 13,000 kN (1300 tons) Hydraulic-mechanical two-platen clamping system 4 pressure pads 4 adjustment units on the moving platen Fully hydraulic clamping system Technical data Mounting plate dimensions: 2210 × 1910 mm Distance between columns: 1570 × 1270 mm Mold opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection unit Complete plasticizing unit for thermoplastics, designed in an abrasion-resistant version. Fpjdpfx Ajzqdibsp Don Technical data Screw diameter: 105 mm Injection pressure: 2296 bar Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plasticizing rate (PS): 130 g/s Control system The machine is equipped with a modern Krauss Maffei MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Equipment includes: 19-inch color touchscreen ProcessDesigner process visualization Full machine diagnostics Advanced process parameter setting functions PV injection unit adjustment Electrical and hydraulic equipment Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 liters Dimensions and weight Length: 13.65 m Width: 3.65 m Height: 2.82 m Machine weight: 70 tons KRAUSS MAFFEI LRX 350 linear robot The machine is equipped with a Krauss Maffei LRX 350 linear robot, designed for automatic part removal. Robot parameters Payload: up to 35 kg Part removal on the side opposite the operator Range of motion X-axis (removal from the mold) 1200 mm servo drive Y-axis (vertical) 1000 / 1000 mm (telescopic) servo drive Z-axis (transverse) 3500 mm servo drive C-axis rotation 0–90° pneumatic drive torque 60 Nm In addition: absolute positioning measurement system.

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, KraussMaffei KM 1300 MX – SP 8100 / Screw Ø105 mm Clamping Unit 1. Clamping force: 13,000 kN / 1,300 t 2. Mold opening force: 910 kN 3. Moving platen force, opening/closing: 159 / 153 kN 4. Platen dimensions: 2,150 × 1,910 mm 5. Distance between tie bars (H × V): 1,550 × 1,250 mm 6. Opening stroke: 2,350 mm 7. Mold height min./max.: 700 / 1,400 mm 8. Maximum daylight: 3,050 mm 9. Ejector stroke: 350 mm 10. Ejector force forward/backward: 250 / 125 kN 11. Optional increased mold height min./max.: 950 / 1,650 mm 12. Daylight with increased mold height: 3,300 mm Injection Unit – SP 8100 Screw diameter: 105 mm 1. L/D ratio: 23 2. Maximum injection pressure: 1,778 bar 3. Stroke volume: 4,546 cm³ 4. Shot weight PS: 4,137 g 5. Injection flow rate: 805 cm³/s 6. Screw speed nominal/max.: 126 / 159 rpm 7. Plasticizing rate PS at nominal speed: 147 g/s 8. Plasticizing rate PE at nominal speed: 116 g/s 9. Plasticizing rate PS at maximum speed: 187 g/s 10. Plasticizing rate PE at maximum speed: 147 g/s 11. Nozzle contact force: 166 kN Electro-Hydraulic Equipment 1. Pump motor rated power: 110 kW 2. Installed heating capacity: 59 kW 3. Barrel heating/control zones: 7 4. Dry cycle rate according to Euromap 6: 761 cycles/h 5. Dry cycle time according to Euromap 6: 4.7 s 6. Oil tank capacity: 1,500 l Dimensions & Weight 1. Net weight incl. control cabinet: 77 t 2. Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m 3. Maximum mold weight: 29,000 kg Fodpfx Aeztpkpep Dopn With Electric Screw Drive 1. Screw drive power: 117 kW 2. Screw speed nominal/max.: 123 / 193 rpm 3. Plasticizing rate PS nominal: 144 g/s 4. Plasticizing rate PE nominal: 114 g/s 5. Plasticizing rate PS maximum: 226 g/s 6. Plasticizing rate PE maximum: 178 g/s With Accumulator (ZE) 1. Injection flow rate: 1,732 cm³/s Equipment: 1. Removable tie bar (rectable tie bar) 2. Euromap 67 for robot 3. 48 Hotrunner controllers 4. 8 pneumatic cascades 5. 6 hydraulic cascades 6. 2+2 cores 7. MC 6 controll panel Material used: PP, PC

Condition: good (used), Year of construction: 2006, Used milling machine from Hartford Type: VMC-1600S Heidenhain iTNC530 CNC control X = 1600 mm Y = 800 mm Z = 660 mm Fsdjz Hbf Njpfx Ap Djpn Table dimensions: 1700 x 750 mm / max. 2000 kg 20-tool automatic tool changer Equipped with a 4th axis on the table

Condition: used, Kündig ENORM 1300-2 wide-belt sander for the precise calibration and fine sanding of solid wood, veneer and wood-based materials. This robust industrial model, featuring two sanding units and a cleaning brush, delivers high material removal rates and precise surface quality in the furniture and interior fit-out sectors. Ideal for craft and industrial businesses with high quality standards, including a set of sanding belts. Technical data: - Working width: approx. 1,300 mm - Grinding units: 2 - Clearance height: max. approx. 150 mm - Motor power: 18.5 & 15 kW Fpedpfozryxnjx Ap Djn

Condition: used, Year of construction: 1998, functionality: fully functional, VMC 600, used. Fedpfx Apsz Ehnuj Djpn

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 1300-12000 MX injection molding machine LRX 350 robot Year of manufacture: 2015 Technical data Clamping unit • Clamping force: 13,000 kN (1300 tons) • Opening force: 910 kN • Platen dimensions: 2210 × 1910 mm • Tie bar spacing: 1570 × 1270 mm • Mold opening stroke: 2350 mm • Maximum opening: 3050 mm • Mold height: 700–1400 mm • Ejector stroke: 350 mm • Ejector force: 250 / 125 kN Injection unit • Screw diameter: 105 mm • L/D ratio: 23 : 1 • Maximum injection pressure: 2296 bar • Injection volume: 5195 cm³ • Injection weight (PS): 3689 g • Injection speed: 99 mm/s Fpjdpfx Ajzinanjp Den • Injection rate: 856 cm³/s • Maximum screw speed: 144 rpm • Plasticizing rate (PS): 130 g/s Electrical equipment • Pump motor power: 132 kW • Heater power: 75 kW • Number of heating zones: 7 • Oil tank capacity: 2440 l Dimensions • Machine weight: 70 tons • Dimensions: 13.65 × 3.65 × 2.82 m Krauss Maffei LRX 350 robot • Maximum payload: 35 kg • X-axis: 1200 mm (servo drive) • Y-axis: 1000 / 1000 mm, telescopic (servo drive) • Z-axis: 3500 mm (servo drive) • C-axis: 0–90°, pneumatic drive • C-axis torque: 60 Nm • Absolute position measurement system

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1300-7 /1.4 + Omnicore C90XT + TPU DEMO ROBOT DEVELOPED BY GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Fedpjzxbk Sefx Ap Dopn

Condition: excellent (used), Year of construction: 2006, Arburg 570C 2200-1300 / Hybrid Machine Year of manufacture: 07.2006 Injection unit: Screw diameter: 55 mm Shot weight: 469 g Injection pressure: 2380 bar Dosing volume: 558 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of the platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Controller: SELOGICA Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Controller with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving The injection unit is driven by a servo motor, which is controlled by an inverter Dimensions: Weight: 9300 kg Length/Width/Height: 5.16x2.06x2.39 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Fpjdpoz Ip U Usfx Ap Den Price: On request

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m Fpedpfx Asz Iqa Sjp Dsn All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2004, functionality: fully functional, VMC300 D with 4-axis capability. Fjdjz Ehp Eepfx Ap Dopn

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Fodsz Ip Axspfx Ap Depn Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data Fpedpov Hn N Usfx Ap Dsn - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Condition: like new (used), Year of construction: 2015, nominal power: 1,300 kW (1,767.51 HP), rotational speed (min.): 1,493 rpm, rotational speed (max.): 1,493 rpm, input voltage: 6,000 V, input frequency: 50 Hz, overall weight: 6,100 kg, 1 asynchronous electric motor Fodpfx Asv I Alyjp Djpn Manufacturer: Reform Elektromotorenbau GmbH Type: Y2-500-4 Power: 1300 kW Speed: 1493 rpm Voltage: 6000 volts Current: 151.4 A cos Φ: 0.86 Insulation class: F Frequency: 50 Hz Protection class: IP55 Design: Foot (B3) Operating mode: S1 continuous operation Weight: 6100 kg Year of manufacture: 12/2015 Bearings: NU228C3 / 6030C3 and NU228C3 Cooling: Air Shaft height: 500 mm

Condition: good (used), Saw blade diameter: 1310 mm Cutting diameter: 440 mm Machine weight: approx. 7.5 tons Fodpfx Ajz Iyccjp Djpn

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 Used, untested Additional information – Machine weight: approx. 4,200 kg Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Fpedjzz S R Uspfx Ap Dsn Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 28 m/min, rapid traverse Y-axis: 28 m/min, rapid traverse Z-axis: 28 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 25 kVA, torque: 105 Nm, controller manufacturer: Fanuc, controller model: Series 0i-MC, workpiece length (max.): 1,100 mm, workpiece width (max.): 600 mm, workpiece weight (max.): 800 kg, total height: 2,800 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 1,200 mm, table height: 600 mm, overall weight: 7,500 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 8,000 rpm, coolant supply: 6 bar, spindle motor power: 11,000 W, number of slots in tool magazine: 16, input voltage: 380 V, BT40 spindle Automatic tool changer 16 tools Oil cooling unit, pneumatic system, lubrication unit Heavy structure, approx. 7.8 tons Excellent for precision machining of steel, aluminium and industrial components Country of origin: Taiwan Fpodsyxac Aopfx Ap Djn

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm 6 hydraulic cylinders, 75 mm Fpedozfgaropfx Ap Djn Clearance: 400 mm Water heating Year of manufacture: 2001 Weight: 3200 kg Overall length: 440 cm Overall width: 190 cm

Condition: good (used), Year of construction: 2009, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC 530, workpiece weight (max.): 4,500 kg, total height: 3,500 mm, total length: 8,500 mm, total width: 3,500 mm, table width: 1,000 mm, table length: 4,150 mm, table load: 4,500 kg, overall weight: 25,000 kg, coolant supply: 20 bar, spindle motor power: 24,000 W, number of slots in tool magazine: 40, Equipment: chip conveyor, 3-axis CNC machine (VMC) Hedelius - C100 Magnum MACH-ID 9819 Make: Hedelius Type: C100 Magnum Control: HeidenHain iTNC 530 YOP: 2009 incl. Coolant system with 20 bar IKZ incl. Paper filtration system incl. Heidenhain HR 410 Remote Handwheel   X - Travel: 3500mm Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK-63ISO/Bt/Mk Power on spindle: 24kW Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 8500mm Width: 3500mm Height: 3500mm Weight: 25000kg Fpjdpfx Apez Hkg No Den Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details

Condition: good (used), Year of construction: 2000, functionality: fully functional, working width: 1,300 mm, passage height: 200 mm, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, the machine is in good condition. Fpjdpfxoy Tm Alj Ap Dsn

Condition: good (used), Year of construction: 2019, Manufacturer: INK SYSTEMS Model: Soft Sonic IS Compact 1300 Hybrid Machine Type: Hybrid Ultrasonic Anilox Roller Cleaning System Year: 2018 Maximum Working Length: approx. 1,300 mm Condition: Good used condition FGT Condition Rating: 8/10 Availability: Subject to prior sale Why this machine is of interest Clean anilox rollers are essential for stable ink transfer, consistent color density, and reproducible flexographic print quality. The IS Compact 1300 Hybrid is designed for professional and efficient cleaning of anilox rollers. Its hybrid cleaning concept offers an attractive solution for label and packaging printers seeking to remove dried ink residues and contamination from engraved anilox cells while reducing manual cleaning effort. For a flexographic printing company, this can directly support: more consistent ink transfer, improved print quality, recovery of effective anilox cell volume, reduced manual cleaning time, longer service life of valuable anilox rollers. Main Technical Data & Configuration Professional anilox roller cleaning system Hybrid cleaning technology Ultrasonic cleaning principle Suitable for anilox rollers up to approx. 1,300 mm Controlled cleaning process Designed for professional industrial use Suitable for regular maintenance cleaning Compact machine design Closed cleaning concept Year of manufacture: 2018 Suitable Applications Ideal for: Label printing companies Narrow- and mid-web flexographic printers Flexible packaging production Folding carton applications Industrial flexographic printing Fedpfezmhbgox Ap Dspn Regular maintenance of anilox rollers

Condition: used, Year of construction: 2006, functionality: fully functional, The PowerShot allows for large quantities of chocolate to be deposited, with or without pre-mixed ingredients. In addition to its top quality, the PowerShot impresses with its performance in dot, band, or one-shot depositing. The working width is 1300 mm. Fedpfoxdt Dhsx Ap Djpn Key data: • Type: Bühler depositor PowerShot, one-shot/drop depositor • Working width: 1,300 mm • Year of manufacture: 2006 • Bühler commercial number: 064200.010 • Design: complete V4A stainless steel, weight approx. 1,000–1,500 kg • Condition: mechanically complete; currently not connected, without software/control (display missing). With connection and programming, it is likely to be functional according to our assessment. • Control cabinet/machine: untouched – nothing has been removed or modified. We have deliberately removed the covers so that no pests can nest and we can regularly inspect everything. • Location: Upper Austria (AT), loading on site possible. No modifications have been made to the control cabinet or the machine; the covers have been removed to prevent pests from entering and to allow us to regularly inspect everything.

Condition: good (used), Year of construction: 2000, operating hours: 1,18,400 h, functionality: fully functional, machine/vehicle number: 182854, clamping force: 2,500 kN, overall weight: 14,000 kg, heating capacity: 23.1 kW (31.41 HP), type of input current: three-phase, For sale is an Arburg 630 S 2500-130 injection moulding machine. The machine is in good condition and ready for immediate operation. Technical data: Year of manufacture: 11/2000 Place of production: Made in Germany Clamping force: 2500 kN Operating hours: 118,400 h Injection unit: 1300 (shot volume/capacity) Total machine weight: 14,000 kg Operating voltage: 400 V (3 ~ AC) Fpsdpfx Ajyx Daxop Don Frequency: 50 Hz Heating capacity: 23.1 kW Pump motor: 45.0 kW Total connected load: 68.1 kW Transport and loading can be organised throughout Europe for an additional charge, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller manufacturer: Heidenhain TNC 426 PB, workpiece weight (max.): 750 kg, total height: 2,750 mm, total length: 4,000 mm, total width: 2,250 mm, table width: 490 mm, table length: 1,000 mm, table load: 750 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,200 kg, spindle motor power: 13,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, 3-axis CNC machine (VMC) BRIDGEPORT - VMC 800 XP MACH-ID 9835 Make: BRIDGEPORT Type: VMC 800 XP Control: Heidenhain TNC 426 PB X - Travel: 800mm Y - Travel: 510mm Z - Travel: 600mm Table Length: 1000mm Table Width: 490mm Table load: 750 Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: Sk40ISO/Bt/Mk Power on spindle: 13kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Fpjdpfx Apoz Nw Igs Dsn Length: 4000mm Width: 2250mm Height: 2750mm Weight: 4200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Double-sided component painting line fully automatic Working width of the line 1300 mm The line consists of the following devices: - Vacuum feeder - automatic feeder before painting - GIARDINA Dualtech 416 automatic paint machine - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - material turntable - automatic painting machine RICHFRUITS - 2 x 12m hot air drying tunnel Fpedpetut Dxefx Ap Dsn - UV dryer - 3 lamps - Vacuum feeder Machine in working order, connected in very good condition.