Used Motan Mde 40-0 (2010) for sale (92,263)

Condition: used, Year of construction: 1980, mit 50 Platten Plates maximum: 60 Ijdjz Sdm Nopfx Anijtn Plate formats: 400x400 Platefilter features: Manual spindl dimension ca. 160x60x100 cm Distance between first plate and spindle approx ca. 120cm

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Dosing method: Weight-based, using a load cell Weighing range: 0.5 to 30 kg Accuracy: 10 g Iedpfx Anoz Ic Nfsijtn Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Filling spout: With anti-drip valve Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns - Pneumatic diaphragm pump - Flow rate: 2 to 4 m³/h - Transport trolley Documentation: Available Video: On request

Condition: used, Year of construction: 1963, overall weight: 1,050 kg, type of input current: three-phase, input voltage: 380 V, power: 2.8 kW (3.81 HP), input frequency: 50 Hz, input current: 7 A, CYLINDRICAL GRINDING MACHINE VEB BWF BERLIN SI 40x70 Model: SI 40X70 Serial number: 1436 Year of manufacture: 1963 Total weight: 1.05 t Circuit arrangement: SI40-60.0 Sp Ijdozl Sn Uepfx Anijtn Wiring diagram: SI40-60.0 Lp Type of current: 3-phase AC Frequency: 50 Hz Operating voltage: 380 V Distribution voltage: 220 V Connected power: 2.8 kW Machine rated current: 7 A Rated current (fast): 25 A Permissible protection (slow): 20 A If you have any questions or require further information, please send a message or contact us by phone.

Condition: repair required (used), Two desiccant dryers in need of repair. Iedextvb Iepfx Anijtn Suitable for a hobbyist or as a source of spare parts. Type MDC 800 Capacity: 42 kW Year of manufacture: 1990 and 1994 PRICE REDUCED FROM 2850 TO 1200 EUR FOR BOTH!!!

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks Itsdpfsz N Hxhjx Anijn * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 416158, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 250 mm Z-axis through-hole: 200 mm T-slot clamping table: 1,250 × 1,000 mm Table dimensions: approx. 1,250 × 1,000 mm Spindle speed: max. 20,000 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,900 mm Weight: 750 kg EQUIPMENT Iedpfx Ansz Il Rrjistn Documentation Accessories Note: The tool changer is not installed. External reference: Wup - Lot 16

Condition: good (used), Year of construction: 1957, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: M.Heitze / Deuma Heitze, Container rotating device, welding rotating device type 405/0 -Load capacity: kg -Roller spacing: 240 - 780 mm -Rollers: Ø 185 x 105 mm -Rolling speed: 0.15 to 0.70 m/min Right/Left rotation Itsdpfsz Szkwsx Anijn -Control unit: with foot switch -Individual components: see photos -Transport dimensions: 1160/920/H785 mm / 600/540/H785 mm -Weight: 411 kg / 221 kg

Condition: excellent (used), Year of construction: 2011, operating hours: 29,000 h, functionality: fully functional, Weiler E40 Precision Lathe Manufacturer: Weiler Type: E40 Year of Manufacture: 2011 Itsdpfx Ansztypvsijn Condition: Used, operational, ready for demonstration Operating Hours: 29,000 h Scope of Supply: - Documentation - Machine feet - Coolant system - Machine lamp - Full chuck jaws - Half chuck jaws - 3-jaw chuck - 4-jaw chuck - 4-position automatic tool changer incl. 4 tool holders - MultiFix tool changer

Condition: used, Year of construction: 1999, Motan Dryair LA /4-200 1x 150 Liter 3x 100 Liter Iodexwcb Aspfx Anietn year 1999 price: 8.900€ Contact: Mr. Rainer Eckerle

Condition: ready for operation (used), Year of construction: 2008, total width: 1,030 mm, total height: 1,420 mm, product length (max.): 1,610 mm, Optimizing Cross-Cut Saw manufactured in 2008. This OMGA T 2010 NC features a maximum piece thickness of 105 mm and a maximum piece width of 254 mm. It offers a maximum feed speed of 120 m/min and an average number of cuts of 50–60 per minute. If you are looking to get high-quality cutting capabilities, consider the OMGA T 2010 NC machine we have for sale. Contact us for further details. • Max. piece thickness: 105 mm • Max. piece width: 254 mm • Min. infeed length: 600 mm Iedpfxez Iyrdo Anistn • Max. feed speed: 120 m/min • Cutting speed: 0.5–1 sec • Average number of cuts: 50–60/min • Feed motor power: 5 HP • Max. acceleration: 10 m/sec (as provided) • Overall dimensions: 1,610 × 1,030 × 1,420 mm • Packed dimensions: 1,710 × 1,130 × 1,520 mm

Year of construction: 2008, condition: excellent (used), centrifugal vertical cantilever pump chemcial pump FIP ALFA 65-40 V2CM construction of year:2008 DN:50 Nominal flow 40 m³/h Nominal head:45 m p [bar]: 16 T [°C]: -25 ÷ + 140 RPM: 1470 electrical power 16,5KW 400V 50Hz 34,7 A engine speed: 1470 Iodpfx Ajh Rwbrenistn Execution: vertical, radially split volute casing pumps sump pump or channel impeller Applications: handling of paint, aggressive and process liquids, even with the presence of solid particles in suspension, in chemicals and petrochemicals industries length: 1700mm width: 700mm weight:450 kg

Year of construction: 2003, condition: used, machine/vehicle number: TUNNEL 40/27, Manufacturer: SFERE EMBALLAGE S.A. Year of manufacture: 2003 Electrical current: 10 A CE marking on manufacturer's plate Heat shrink wrapping Integrated through-feed conveyor Heating chamber with top cover Front control panel Iodsz Urq Hjpfx Aniotn Integrated digital display Rotary adjustment control Control buttons on the front Emergency stop on the front panel Lateral switch-disconnector Mobile metal frame on casters Adjustable stabilizing feet Electrical hazard warning Used SFERE EMBALLAGE TUNNEL 40/27 heat shrink tunnel – Through-feed conveyor and digital control General description The used SFERE EMBALLAGE TUNNEL 40/27 heat shrink tunnel is a professional piece of equipment designed for heat shrink wrapping operations. Manufactured in 2003 by SFERE EMBALLAGE S.A., a French manufacturer, it allows products that have been previously wrapped in suitable film to undergo a heating phase as they pass through the tunnel. Designed to be integrated into a professional packaging environment, this heat shrink tunnel features a through-feed conveyor, a front control panel, and a mobile frame. Its manufacturer's identification and visible equipment allow for a clear understanding of its configuration without presuming its current performance. Why this model stands out The SFERE TUNNEL 40/27 combines product conveyance with a heat shrink operation. This configuration facilitates the organization of a packaging station where items, already wrapped in film, pass through the heating zone before subsequent handling or shipping steps. Its control panel with a digital display allows for the monitoring of an operating parameter. A rotary control and several control elements are also visible on the front. The frame mounted on casters, complemented by stabilizing feet, is a practical asset for positioning the machine in a workshop. Key advantages Through-feed conveyor to accompany the passage of products through the tunnel Heat shrink principle suitable for heat shrink wrapping operations Digital display integrated into the front control panel Rotary control accessible to the operator Emergency stop present on the control panel Lateral switch-disconnector visible on the machine Frame on casters facilitating movement Stabilizing feet to immobilize the equipment at the workstation Manufacturer's plate for identifying the model and its year of manufacture

Year of construction: 2018, condition: used, Motan dryairdryer LA600 600 m³/h year 2009, reconditioned Webpanel / LuxorNET controling Iodotphgxepfx Anietn year: 2018 price: 12.400 € contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 1997, Well-maintained, used column drill from Alzmetall. Itedpfxez H T Euo Anion Model: Alzstar 40 Capacity: 40mm.

Year of construction: 2017, condition: used, Motan pressed air Dryer Luxor CA 60 60 Liter year 2017 Itedpfx Aorupphsnion price: 3.450 € Contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts Ijdsz Sb Rljpfx Anistn * Swiss quality – very robust construction

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 Isdpfx Anjyfgzdsietn 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: ROD39, 1 Demag KBK I wall-mounted slewing crane, 400 kg payload / lifting capacity Jib length 2 m, 400 kg payload Equipped with Demag DC chain hoist, 400 kg capacity Weight including wall bracket approx. 200 kg Complete with chain hoist, cable carrier, trolley, and small parts Slewing range 270° Item location: 75053 Gondelsheim Iedpfx Anoxmuumsiotn System is fully disassembled and immediately available Shipping by freight forwarder or collection Please enquire for shipping costs by postal code

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Motor protection switch Brake motor Itjdpfeulzchsx Anijn Emergency stop switch CE including dust collection hood for extraction connection DM 120 mm Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Manufacturer Mazak with chip conveyor and accessories Type VQC-15/40 Year of manufacture 1985 Technical data X-axis travel 560mm Itjdezq Hwnopfx Anisn Y-axis travel 410mm Z-axis travel 380mm Control system Mazatrol CAM M-2 Table length 900mm Table width 410mm Workpiece weight 300kg Tool changer 30 Spindle taper CAT 40 Max. spindle speed 6000rpm Spindle motor power 7.5KW Length x width x height 2300.0 x 2400.0 x 2480.0 Weight 4750 kg

Condition: excellent (used), 3D Metal Printer Manufacturer: CONCEPTLASER Model: M1-2010-01-01 Year of manufacture: 2010 Build volume: 250 x 250 x 275 mm Compressed air: 7 - 8 bar Inert gas: 5 bar Supply voltage: 3/N/PE AC400V +/-10% 50 Hz Materials: CL50WS: 50 kg and CL91REW: 40 kg Equipment: - 1 Rofin fiber laser StarFiber 200 with 200 W - 1 process chamber (can be inertized) Itsdpfx Ajxk T Ndjnisn - 1 loading station - Nitrogen generator incl. 1000-liter pressure vessel - Conceptlaser automatic sieving station (2 material sets) - Explosion-proof vacuum cleaner Manufacturer: Ruwac, Year: 2023 - Various accessories (filters, seals) - Machine operating hours: 16,620 h - Laser source operating hours: approx. 11,000 h

Year of construction: 1999, condition: excellent (used), MAJA FPS-40 Itsdpfspcdfksx Anijn ID.NO. 2560 Maja FPS-40 porting machine for boneless meat products. Portiner with a margin of 0-3 gr. Very easy machine to use and maintain. Dimensions 280 x 70 cm H 175 cm.

Condition: good (used), functionality: fully functional, Speed adjustable in a continuous range from 60 to 1600 rpm, threading function, feed mechanism, swivel table. Itedpfx Ansz Rmnreien

Condition: like new (used), Year of construction: 2019, functionality: fully functional, load capacity: 4,000 kg, Equipment: documentation/manual, Sideros Syncrolift Column Lifting and Rotating Device, 4000 kg load capacity, like new condition. Minimum height: 450 mm Maximum height: 1950 mm Travel: 1500 mm Diameter of clamping disc: 800 mm Overall height: 2505 mm Itedpfeyrz Hnex Anien Total weight: 1300 kg Torque: 5500 N/m Speed: 0.75 RPM.

Condition: used, functionality: unexamined, Ferwood Code: RU0011693 - Manufacturer Code: C5520-1004-0020 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer a refurbishment service; please contact us. 11KG 70X46X34cm Itjdpfxoyk E Rbs Anion