Used Mounting Bracket With Threaded Holes for sale (15,159)

Condition: used, Year of construction: 1972, machine/vehicle number: ROD24, 1 Demag KBK II wall-mounted slewing jib crane, 250 kg load capacity / lifting capacity Jib length 4m, load capacity 250 kg Equipped with Demag PK chain hoist, load capacity 250 kg Weight including wall bracket (recent date) approx. 350 kg Lredpfoxmuuaex Ab Ust Complete with chain hoist, cable trolley, travel carriage, and small parts Slewing range 270° Item location: 75053 Gondelsheim The system is fully dismantled and immediately available Shipping via freight carrier or collection Please inquire shipping costs by postcode

Condition: used, Year of construction: 2023, operating hours: 120 h, Almost like new, a Haas TRT210 two-axis rotary table with only approximately 120 operating hours. The table was used exclusively on a Haas VF-4 (see separate listing) and is in flawless optical and technical condition. The TRT210 is Haas’s compact 5-axis solution for medium-sized VMCs, and it takes up minimal space by being mounted at one end of the machine table – the rest of the mounting surface remains free for vises or other fixtures. Lsdpfxsy Tp Hgo Ab Usrt Plug-and-play connection to any Haas milling machine with 4/5-axis drives and the corresponding NGC control software. In addition to the rotary table itself, the scope of supply includes the matching toe clamp kit for direct mounting on the machine table, as well as a Renishaw riser block for side mounting of the radio receiver (OMI/OMP) – this ensures reliable signal transmission to the measuring probe even over the full A-axis swivel range. Inspection possible by appointment. Shipping can be arranged. Technical data: - Table diameter: 230 mm (9.10") - Max. pitch circle: 368 mm (14.5") - Max. workpiece weight on table: up to approx. 90 kg - Hole pattern: 2× 6-hole pattern A-axis (swiveling): - Swivel range: ±120° - Max. speed: 80°/s - Max. torque: approx. 407 Nm (300 ft-lb) - Braking torque at 6.9 bar: approx. 540 Nm - Accuracy: ±25 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° B-axis (rotating): - Rotation range: 360°/continuous - Max. speed: 100°/s - Max. torque: approx. 285 Nm (210 ft-lb) - Braking torque at 6.9 bar: approx. 270 Nm - Maximum runout: 0.013 mm (0.0005") - Accuracy: ±15 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° General: - Connection voltage: 115 VAC, approx. 15 A - Compressed air max.: approx. 10 bar (150 psi) - Weight: approx. 220 kg Scope of supply: - Haas TRT210 rotary table complete - Original Haas servo connection cable for A and B axes - Toe clamp kit (for mounting on the machine table) - Renishaw riser block for side receiver mounting - Original documentation

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Technical data: Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Lredpfx Ajzp E Dkeb Ust Central through hole Precision-machined clamping surfaces Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Application areas: Vibration test benches Vibration testing Environmental testing Testing laboratories Research and development Mechanical engineering Automotive industry Aerospace technology Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/0297, 1 Demag KBK II wall-mounted slewing crane, 250 kg load capacity / lifting capacity Outreach 5m, 250 kg load capacity with Demag DC chain hoist, 250 kg load capacity Lrjdpfx Abezv H T Te Ust Weight incl. wall bracket approx. 300 kg Complete with chain hoist, cable track, trolley and small parts Slewing range 270° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Shipping via freight forwarder or pickup Please inquire about shipping costs, specifying the postal code.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, side door, sandwich construction Equipment: Lrjdszy Dkdopfx Ab Ujt - 6 lashing eyes - Lashing rails - 30mm insulated wall Net price: €8,983.19 / Gross price: €10,690.00 Article number: TKC227351820.09 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 355 x 184 x 205 cm • External dimensions (LxWxH): 521 x 237 x 267 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Tare weight: 810 kg • Payload: 1,890 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust construction • Floor made of Finnish plywood • Many crossmembers, resulting in high point load capacity • Body made of very strong steel sheet sandwich, insulated, 50mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Doors with special sealing profiles, made of hard/soft plastic • Side door, standard on the right front, approx. 70cm, with three-bolt safe locking system, can be locked from the inside and outside • Ramp & door combination • Aluminum loading ramps can be switched to wing doors • Loading possible via ramp or also with a forklift from the rear • Non-slip with gas struts • With 4 crossbars, hot-dip galvanized • Instead of 2 rear doors • With swivel latch, lockable • Load capacity max: 800 kg • Continuous interior height: approx. 200cm • Continuous interior width: approx. 180cm • 2x maneuvering handles at the front • Rear frame on hot-dip galvanized steel, massively welded • 6 lashing brackets embedded in the floor (750DaN/kg) • Slotted-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reversing aid automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale here is a CNC machining center, DMC 1035V, including a Microset UNO tool measuring system, mounting bracket for the SK 40 tool holders, a tool cabinet, and approximately 140 tools and SK 40 tool holders. The machine is well-maintained and clean and has a 30-position tool changer, including a band filter system. The only defect on the machine is that the rotary through-spindle is leaking for the internal coolant supply (IKZ). Furthermore, the milling machine has a DXF converter and an offline programming station. Sold with VAT shown. No returns, no warranty. Lrsdpfx Ajz Ahgzeb Uet

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Lrjdpfjyyygkjx Ab Ujt Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Power: 3,200 W

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube Manufacturer: BAT Machine type: Shaker Fixture Cube / Mounting Cube Material: Magnesium For sale is a high-quality, used Shaker Fixture Cube made of magnesium, designed for vibration and shock testing systems. The mounting cube serves as a universal adapter and clamping device for securing test specimens, fixtures, and measurement setups on electrodynamic vibration testing systems (shakers). The precision-machined mounting surfaces with a threaded grid on all sides allow for the flexible implementation of various test setups. The magnesium design offers high rigidity with a low weight, making it particularly suitable for dynamic vibration and environmental testing. Technical data Manufacturer: BAT Type: Shaker Fixture Cube / Mounting Cube Material: Magnesium Dimensions: approx. 400 × 400 × 400 mm Thread size: M8 Threaded grid on all sides Precision-machined mounting surfaces Several large through-holes for mounting Features Robust, lightweight magnesium construction Precision-machined mounting surfaces Multi-sided threaded grid Large corner through-holes Industrial design Application areas Electrodynamic vibration testing systems Vibration testing Environmental testing technology Automotive testing technology Aerospace Electronics testing Testing and development laboratories Quality assurance Transport data Dimensions: approx. 400 × 400 × 400 mm Weight: approx. 35 kg Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear consistent with age. Scope of delivery Magnesium Shaker Fixture Cube Scope of delivery as shown in the pictures Lredpfozkhxtex Ab Uet Shipping via freight forwarder or self-collection possible. Subject to changes, errors and prior sale.

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube with Adapter Plate Manufacturer: BAT Machine Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Design: with lateral adapter plate For sale is a high-quality, used magnesium clamping cube for vibration and shock testing systems. The Fixture Cube serves as a universal clamping and adapter device for securing test specimens, fixtures, and assemblies on electrodynamic vibration testing systems (shakers). The precision-machined clamping surfaces with numerous threaded holes allow for the flexible configuration of various test setups. The laterally mounted adapter plate further expands the range of applications. Technical Data Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Dimensions: approx. 330 × 330 × 330 mm Precision-machined clamping surfaces Thread pattern on multiple sides Large through-holes at the corners Lateral adapter plate made of aluminum Features Magnesium lightweight construction Precision-machined clamping surfaces Multi-sided thread pattern Adapter plate made of aluminum Industrial design Application Areas Electrodynamic vibration testing systems Vibration testing Environmental simulation Automotive testing technology Aerospace Electronics testing Testing and development laboratories Quality assurance Shipping Data Dimensions: approx. 330 × 330 × 330 mm Weight: approx. 30–40 kg Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. Lodpfxezkhv Sj Ab Ujrt Scope of Delivery Magnesium Shaker Fixture Cube Adapter plate Scope of delivery as shown in the pictures Shipping via freight forwarder or self-collection possible. Subject to change, errors and prior sale.

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube Manufacturer: BAT Machine type: Magnesium Shaker Fixture Cube / Clamping Cube Material: Magnesium Thread size: M8 For sale is a high-quality used magnesium clamping cube for vibration and shock testing systems. The fixture cube is used for the flexible mounting of test specimens, fixtures, and adapters on electrodynamic shakers. The numerous M8 threaded holes on several sides allow for a wide variety of test setups to be realized. The magnesium design ensures high rigidity while maintaining low weight and is ideal for applications in environmental, shock, and vibration testing. Technical data Dimensions: approx. 300 × 300 × 300 mm Material: Magnesium Thread size: M8 Threaded holes on several sides 2 lifting eyes for transport Internally weight-optimized design Application areas Electrodynamic vibration testing systems Shock testing systems Environmental testing technology Automotive Aerospace Electronics testing Quality assurance Research and development Testing laboratories Equipment Robust magnesium design Precision-machined clamping surfaces Thread pattern on several sides Lifting eyes Industrial design Transport data Dimensions: approx. 300 × 300 × 300 mm Weight: approx. 30–40 kg Condition Used From industrial use. Normal wear and tear consistent with age. Lrsdpfszkgqnox Ab Uot Optical condition as shown in the pictures. Scope of supply BAT Magnesium Shaker Fixture Cube Scope of supply as shown in the pictures Shipping by freight forwarder or self-collection possible. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm Lrodpozx D A Dofx Ab Ust - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: GP58 Katzfahrt, 1 Vetter wall-mounted slewing crane, 500 kg load capacity / lifting capacity Type PW2.5-4.0 Reach approx. 4m, 500 kg - 0.5t load capacity with chain hoist, 500 kg load capacity (2 lifting speeds and trolley drive) Total weight approx. 350 kg Year of manufacture 1999, Abus chain hoist from year 2007 Complete with wall bracket, boom, chain hoist, cable carrier, carriage, and small parts Slewing range approx. 180° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Fully functional condition See pictures Ljdpfx Ajy Ugb Deb Ujrt Shipping by freight forwarder or collection Please inquire about shipping costs based on your postal code.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 35789 + 35790, Offer 21478 Technical data: - Operation via handheld remote control with cable - Total load capacity approx. 2000 kg - Load capacity per table approx. 1000 kg - Platform made of aluminum with various threaded holes - Platform size approx. 2800 x 1800 mm - Min. lifting table height approx. 280 mm - Max. lifting table height approx. 1100 mm Lrsdjzc Hc Nopfx Ab Ujt - Lifting stroke approx. 820 mm - Hydraulic drive, each 400 V / 1.1 kW - Separate control cabinet - Separate hydraulic unit with wall mounting bracket - Space requirement approx. W 2850 x D 1850 x H 280 mm - Weight approx. 800 kg

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-644, Technical data: 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel chain hoist 125Kg Payload at full radius 125KG / 0,125to payload Outreach: approx. 3m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Lsdpfety Swyjx Ab Ujrt Shipping by forwarding agent or collection by appointment only

Year of construction: 2020, condition: like new (used), functionality: fully functional, The A.Celli Stream in Line 668 is a complete industrial in-line slitter winder designed for integration into medium- and low-throughput production lines for nonwoven fabrics and composite materials. The machine performs longitudinal web slitting and surface-driven winding of finished rolls. The slitting system uses 12 circular-knife units operating with band counter-knives mounted on a motorized expanding shaft. The configuration includes a motorized S-wrap, a motorized SUS supporting roller, edge-trim extraction, shaft supports, a bar acceleration mechanism and a roll holder. The web is guided through bowed spreader rollers to reduce wrinkles and folds. The machine is equipped with AC drives, a control cabinet, an operator panel, a desktop computer with monitor and industrial communication via Profinet and Ethernet TCP/IP. Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream in Line Machine version: 668 Lodpfx Abszudfdj Ujrt Serial number: 2020026 Year of manufacture: 2020 Application: Longitudinal slitting and winding of nonwoven fabrics and composite materials Winding design: Surface driven Production speed: 200 m/min Web threading speed: 10 m/min Cross-cutting system: Circular knife Longitudinal slitting system: Band counter-knives on a motorized expanding shaft Number of slitting units: 12 Edge-trim extraction: Yes Number of shafts: 4 Shaft diameter: 3″ Drive system: AC motors Motorized S-wrap: Yes Motorized SUS supporting roller: Yes Shaft supports: Yes Bar acceleration mechanism: Yes Roll holder: Yes Drive side: Left Operator side: Left Control cabinet side: Left Operator panel colour: RAL 7035 Control cabinet colour: RAL 7035 Length: 6200 mm Width: 5550 mm Height: 3045 mm Total weight: 16,000 kg Supply voltage: 400 V Number of phases: 3 Auxiliary AC voltage: 230 V DC control voltage: 24 V Frequency: 50 Hz Power supply earthing system: TN Protection rating of power cabinets: IP55 Electrical reference standard: IEC 60204-1 Cable entry into cabinets: From below PLC communication: Profinet Field communication: Ethernet TCP/IP PLC software: TIA Portal Operator computer: Desktop computer with monitor Compressed-air pressure: 6 bar Air consumption during web threading: 4500 Nl/min Air consumption during normal operation: 700 Nl/min Air consumption during the change cycle: 2000 Nl/min Cable routing: In floor ducts Operating temperature: +15°C to +40°C Storage temperature: +25°C to +55°C Relative humidity: Below 80% Maximum operating altitude: 1000 m Equivalent continuous sound pressure level LEQ: Below 85 dB A-weighted sound power level LWA: Below 83 dB Installed drives: Transmission roller, S-wrap roller, slitting unit, SUS roller, accumulation shaft The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, sandwich construction Equipment: - Tie-down rails - 4x tie-down eyes - 30mm insulated wall Net price: €5,735.29 / Gross price: €6,825.00 Article number: TKC227301820.01 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration Lrsdoyivbnjpfx Ab Uot • Internal dimensions (LxWxH): 305 x 184 x 205 cm • External dimensions (LxWxH): 454 x 235 x 269 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Tare weight: 735 kg • Payload: 1,965 kg • Chassis: Low-loader (wheels beside the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, securely bolted V-drawbar • Very stable aluminum frame • Frame with high torsional rigidity due to its robust construction • Floor made of Finnish plywood • Many cross members for high point load • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • 2-leaf rear door with stainless steel swivel latch, lockable • Continuous interior height: approx. 200cm • Continuous interior width: approx. 184cm • 2x maneuvering handles at the front • Doors with special sealing profiles, made of hard/soft plastic • Rear frame on hot-dip galvanized steel, welded solid • 4 tie-down brackets recessed in the floor (750DaN/kg) • Slot-hole tie-down rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reversing automatic • ALKO overrun device and parking brake • Plastic fenders • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or a transfer license plate (Germany) can be provided. - Export license plate including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Year of construction: 2005, functionality: unexamined, overall weight: 1,500 kg, total length: 1,250 mm, total width: 1,250 mm, plate height: 150 mm, plate width: 1,250 mm, plate length: 1,250 mm, Equipment: type plate available, FIBRO 4x Precision Changeable Pallet 1250x1250 mm / 1,500 kg / Pallet Changing System Description Manufacturer: FIBRO GmbH, Rotary Table Division Type: Precision Changeable Pallet 1,250 × 1,250 mm Year of Manufacture: 2005 Quantity: 4 pieces Package consisting of 4 solid FIBRO precision changeable pallets from an industrial pallet changing/rotary table system. The pallets were used as a machine interface and as a carrier for large workpiece clamping devices. These are not simple clamping plates, but precisely manufactured changeable pallets with indexing, pallet clamping, and integrated pneumatic transfer. Each pallet has a clamping surface of 1,250 × 1,250 mm and a weight of approximately 1,500 kg. The top surfaces have different, customer-specific hole patterns. The pallets are equipped on the underside with two mounted and aligned indexing rings each. The clamping slots have hardened strips as running and contact surfaces. In addition, each pallet has a pneumatic connection with one line. Technical Data - Quantity: 4 pieces - Dimensions per pallet: 1,250 × 1,250 mm - Height: approx. 150–160 mm - Weight: approx. 1,500 kg per pallet - Total weight of 4 pallets: approx. 6,000 kg - Pneumatic connection: 1 line per pallet - Indexing: P1 / P2 - Underside: 2 indexing rings per pallet - Clamping slots with hardened strips - Thread/hole patterns including M12, M20 and M30 - Customer-specific hole patterns - Original drawings or technical FIBRO documents available According to the manufacturer's data, the documented plan parallelism of the pallet top to the bearing surface is 0.025 mm, and the flatness is 0.040 mm. These are explicitly the original manufacturer's values and not a current measurement of the used pallets. Factory/Serial Numbers 1817739 / 002 1817739 / 003 1817739 / 004 1817739 / 005 The pallets have partially different article numbers and different customer-specific hole patterns. Accessories: The offer also includes the mechanical guide and rail set of the pallet changing system shown in the pictures, consisting of roller/guide rails, solid guide and support strips, stop and guide elements, and the existing fastening parts. Condition: Used condition from industrial application. The clamping surfaces show corresponding machining, clamping and wear marks, as well as some discoloration and superficial corrosion marks. The existing hole patterns originate from the original application. Lsdpfozxz Azex Ab Ujrt A current metrological check of the geometric accuracy has not been carried out. Sold in the existing condition and scope of delivery as shown in the pictures.

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-617, Technical data: 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel ST chain hoist 125Kg Payload at full radius 125KG / 0.125to payload Lrodpfx Aoty Swtjb Ust Outreach: approx. 2m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 5,000 h, total length: 1,750 mm, total height: 1,960 mm, total width: 1,240 mm, type of input current: three-phase, overall weight: 658 kg, input voltage: 208 V, input current: 30 A, feed length X-axis: 1,000 mm, feed length Y-axis: 610 mm, feed length Z-axis: 610 mm, space requirement length: 1,750 mm, space requirement height: 1,960 mm, space requirement width: 1,240 mm, STRATASYS F770 – A GREAT OPPORTUNITY: Large-format industrial 3D printer, including a 21 kW three-phase Riello UPS. Eligible for invoicing and 100% tax deduction at the end of the year! Selling for less than 1/3 of the list price due to company asset renewal. [1] WHY IS IT PERFECT FOR YOUR COMPANY? Lsdpfx Ajzyf Speb Ujrt • Single-piece parts over 1 meter: Ideal for dashboards, ducts, housings, and large custom components without joints. [1, 2] • Ultra-resistant materials (ASA/ABS): Printing with ASA, an exceptional material resistant to UV rays, weathering, and mechanical wear, perfect for outdoor and industrial applications. [1, 2] • Jigs and workshop tools: Immediate in-house production of positioning jigs, mounting brackets, and drilling templates. [1, 2] • SR30 soluble support: Enables the creation of hollow geometries and complex shapes (e.g., conduits or cable ducts) without design constraints. [1, 2] TECHNICAL SPECIFICATIONS IN BRIEF: • Condition: 2023 | Only 5000 operating hours (as good as new). • Printing volume: 1000 x 610 x 610 mm. • Machine dimensions: 175 x 124 x 196 cm (L x W x H). • Weight: 658 kg on wheels. • Materials: ABS / ASA | SR30 soluble support. • Layer resolution: 0.33 mm | 0.25 mm | 0.178 mm. • Software included: GrabCAD Print / Insight (native CAD file management). • Details: Three-phase power supply | CE certification. [1, 2, 3, 4, 5] If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: A-250101, total length: 4,600 mm, total height: 1,800 mm, total width: 1,250 mm, input voltage: 230 V, overall weight: 650 kg, compressed air connection: 4 bar, warranty duration: 3 months, input current: 6 A, roll width: 680 mm, pipe diameter (max.): 76 mm, product height (max.): 120 mm, product height (min.): 25 mm, product length (max.): 550 mm, product length (min.): 100 mm, Item A250101 – Record Jaguar 88 Flow Pack Machine Ljdpfxsz Er Nve Ab Uort For sale: Used Record Jaguar 88 flow pack packaging machine. Product flow direction: Left to right Machine finish: Painted Machine Specifications: Overall machine length: 4.6 metres Machine width: 1.2 metres Overall machine height: 1.8 metres Working height: 0.85 metres Usable infeed conveyor length: 2.0 metres Usable outfeed conveyor length: 0.5 metres Flight distance: 400/800 mm Machine capacity: 3,600 packs per hour Machine Connections: Power supply: 230 V N + PE Connected load: 3.2 kW Plug type: CEEform, 5-pin, 16 A Compressed air: Yes (the machine can also operate without compressed air) Machine Features: • Independent temperature control for the cross-sealing unit and longitudinal sealing rollers • 1 set of pulling rollers • 1 set of sealing rollers • 1 set of folding rollers for the longitudinal sealing seam • 1 set of sealing knives, 270 mm wide • Passage height of the cross-sealing unit: 150 mm • Safety coupling in the cross-sealing unit • Flight distance: 400/800 mm • Two-speed control of the flights • Fixed forming shoulder • Maximum film width: 600 mm • Top chain with flights • Mechanical film-length adjustment • Pneumatic product pushers • Mechanical adjustment of cross-sealing speed • Rotating control panel • Machine mounted on wheels for mobility, with adjustable feet • Electronic speed control via potentiometer • Additional 230 V socket • Equipped with a hot foil printer for printing the date on the film • Pneumatic opening and closing of the sealing rollers • Usable infeed conveyor length: 2,000 mm • Usable outfeed conveyor length: 500 mm • All parts that come into contact with the product are made of plastic or stainless steel The machine is particularly suitable for tall and/or long packages.

Condition: good (used), Year of construction: 1976, Stock number: 2909 Manufacturer: ORADEA - Infratirea Year of manufacture: 1976 Machine number: 62981 Type: 6GMA1 Mounting: MK5 Drilling capacity: 63 mm Table: 600 x 700 mm Clamping surface: 450 x 580 mm Distance spindle - table min/max: 200 / 890 mm Vertical adjustment of the head: 690 mm Stroke: 200 mm throat depth: 350 mm Speeds: 56 to 1,220 rpm Feed rate: 0.1 / 0.16 / 0.25 / 0.4 mm/rev Accessories / equipment: Thread cutting option, automatic feed, integrated coolant pump Connection: 4.15 kW Weight: 1.1 t Footprint: 700 x 1,200 mm Dimensions: 700 x 1,200 x 2,600 mm Lrjdpfxsu Tip Rs Ab Ujt

Condition: used, NC universal tool milling machine MAHO type MH 700 P with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Horizontal spindle travel 80 mm Ljdpfx Abowd Szbs Uort Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed - Hydro-mechanical tool clamping - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° - Pivoting control panel - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Weight approx. 2800 kg Good condition

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Lrjdpfx Abjyy Rtze Uot Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

Condition: ready for operation (used), The cell consists of two Kawasaki FD 50N industrial robots as well as an infeed and outfeed conveyor, it is mounted on a compact, mobile base plate equipped with threaded holes for fastening the individual components, a roller conveyor and the safety enclosure, the entire cell is forklift-compatible, can be relocated after installation to adapt the cell to different production lines, particularly suitable for seasonal production and short production runs, area: 8.6m², overall length: 3550mm, overall width: 2440mm. Number of axes: 5, max. reach: 2100mm, max. payload: 50kg, repeatability: +/-0.15mm, robot weight: 580kg, palletizing capacity: 2400 cycles/h at 50kg payload, controller: D42, working envelope: 1100x1100x1944.7mm, axis movements: Axis 1: +/-157°, Axis 2: +140° to -95°, Axis 3: +30° to -205°, Axis 4: +/-360°, Axis 5: +/-10°, axis speed: Axis 1: 180°/s, Axis 2: 150°/s, Axis 3: 180°/s, Axis 4: 350°/s. With documentation. An on-site inspection is possible, the system is not powered. Lrodoztramepfx Ab Uet

Condition: excellent (used), functionality: fully functional, Year of construction: 1974, machine/vehicle number: TD2026, 1 Demag KBK II wall-mounted jib crane, 500 kg load capacity / leverage Lrsdozhh Ngjpfx Ab Uet Several units available, 5-7m reach, 250+500kg!!! Reach 6m, 500kg load capacity with Demag chain hoist, 500kg load capacity Weight including wall bracket approx. 350 kg Complete with chain hoist, cable track, trolley and small parts Swivel range 270° Item location is 75053 Gondelsheim The unit is completely dismantled and immediately available Shipping by freight forwarder or collection Please inquire about shipping costs, specifying the postal code.