Used Mounty 4000 for sale (2,341)

Condition: used, Year of construction: 2014, machine/vehicle number: 78300122, Drive type: Diesel, power: 308 kW, displacement: 10,600 cc, unladen weight: 16,170 kg, permitted total weight: 18,000 kg, with 2 driven axles, recorded mileage: 64,407 km, operating hours: 7,640 hrs, with category 4 rear hitch, mechanical, hydraulic top link, cat. 3, mounting for front weight, 5 additional control valves with breakaway couplings at the rear, rear PTO 1,000 rpm, PTO shaft 1 3/4, 6-spline, engine OM470 K 97/68 308 kW t4, fuel tank extension by 190 liters, refrigerator, semi-active cab suspension, fire extinguisher, GPS Pilot S10 RTK radio; NOTE: Steering shows error message Njdpfoy Rvlkex Aqvowg

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and cross-cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Boards are transported laterally using a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm inclined - Alignment roller section - Chain cross conveyor as a layer former - Star infeed and inspection unit before the trimmer - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (seated) at the joystick assesses: without re-trimming, 5000 mm into stacking machine 1, alternatively: without re-trimming, 4000 mm into stacking machine 1 with re-trimming, 4000 mm into stacking machine 2 with re-trimming, 3000 mm into stacking machine 2 with re-trimming of short lengths for discharge into a box with re-trimming of short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut – cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 – ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee was able to produce, package, and strap approximately 15,000 boards of size 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping unit has already been dismantled. The system is therefore immediately available. It is very robustly built and has always operated smoothly and without any problems. Nwsdpfey Uzldox Aqvsg

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automated side board processing line with singulation, trimmer for cutting to length, 2 stacking machines, additional discharge, and cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross transfer of boards with a 4-strand chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Aligning roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-cutting, 5000 mm into stacking machine 1, alternatively: without re-cutting, 4000 mm into stacking machine 1 with re-cutting, 4000 mm into stacking machine 2 with re-cutting, 3000 mm into stacking machine 2 with re-cutting, short lengths for discharge into a box with re-cutting, short lengths for discharge into a box Njdpjy Uzhfsfx Aqvswg with re-cutting, 2 or 3 x 101 cm for stacking slats with re-cutting, 2 or 3 x 101 cm for stacking slats or waste cut - cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of the finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, with side boards of 4000/17 x 76 mm, one employee produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipping system has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without problems.

Condition: excellent (used), Year of construction: 1998, center height: 630 mm, workpiece weight (max.): 3,000 kg, grinding length: 4,000 mm, grinding parameters 630x4000 mm Nsdpfx Aey Tkgnjqvswg max. weight of workpiece - 3000 kg (in centers) main motor (spindle) - 19 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,963 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X45-15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of Experience | 🧰 In-house Service & Paint Shop | 🤝 Expert Consultation | 🚛 Own Transport Fleet | 🔧 Comprehensive After-sales Support Looking for a forklift you can truly rely on? We are a reputable dealer of new and used forklifts, serving the industry for many years. Our customer base spans all of Europe—from small businesses to major industrial facilities. Our forklifts are more than just equipment—they are your assurance of seamless and dependable logistics. -- What sets us apart? -- ✅ Every forklift undergoes a thorough technical inspection and servicing (including checks, tests, oil & filter changes, and component refurbishment) ✅ Full UDT (Office of Technical Inspection) certification available on request ✅ In-house paint and service workshop—machines are optimized both technically and aesthetically ✅ Pan-European delivery—provided by our skilled drivers ✅ Operator training and on-site machine demonstration at handover ✅ Ongoing after-sales technical support—we stay connected post-purchase ✅ On-site viewing and test drives welcomed at our facility ✅ Hundreds of satisfied customers throughout Europe—become one of them today ✅ Financing options available—we collaborate with leading leasing providers ✅ Invoicing in EUR or PLN—as per your preference -- FOR SALE -- COMBILIFT C5000 – Four-Way Forklift Truck 📅 Year of manufacture: 2015 ⏱️ Operating hours: 4,963 h 🔋 Propulsion: GAS / LPG 📦 Load capacity: 5,000 kg 📏 Mast: Duplex – 4,000 mm lift height 🔩 Fork positioner – width: 1,350 mm | Forks: 1,200 mm 🛞 Superelastic tires – 100% condition 🧪 Technical condition: Excellent – fully serviced 🎨 Visual condition: Clean, corrosion-free, and ready for work Nsdpoy Sl Idjfx Aqvswg 📐 Dimensions: - Lowered mast height: 2,600 mm - Total length: 2,500 mm - Overall width: 2,300 mm - Fork positioner width: 1,350 mm - Overall height: 2,950 mm -- Ideal for: -- 🏭 Narrow-aisle warehouse applications 🌲 Timber, steel, and pipe handling industries 📏 Handling long and bulky loads 🏗️ Both indoor and outdoor operations -- FT Logistics – Quality you can depend on. Service you can trust. --

Condition: good (used), mileage: 35,076 km, color: black, lifting height: 37,000 mm, Year of construction: 2016, operating hours: 3,725 h, Drivetrain Drive: Wheel Make of engine: MAN Weights Empty weight: 7.490 kg Functional Lifting capacity: 4.000 kg Nwodjy Sguxopfx Aqvjg CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Maximum lifting capacity at end of jib: 250 kg Emission level: Stage VI / Tier VI Delivery terms: EXW Latest inspection: 2025-04-14 Production country: DE Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks = Remarks = Böcker AK 37/4000 montiert auf einen MAN TGL 7.180 with passenger basket, construction year 2016 with only 35.076 km and 3.725 hours. This vehicle is in nice condition (has been well maintained over the years) and has among other things: a passenger basket, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: used, Year of construction: 2004, operating hours: 31,350 h, Bed milling machine Brand: ANAYAK Model: VH Plus 4000 Year of manufacture: 2004 Spindle hours: approx. 31,500 hours Table size: 4200 x 1100 Travel distances: x: 4000, y: 1200, z: 1500 mm Nwsdpfxey Uy Ecj Aqveg Max. spindle speed: 5000 rpm Max. feed rate: 10000 mm/min Collection location: Bremen The machine is in daily use, so the operating hours will increase. An inspection is possible at any time by arrangement. The disassembly, loading, etc. is the responsibility of the buyer. A 2-ton forklift and a 5-ton overhead crane are available for "small parts". _____ Our general terms and conditions apply. In addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial businesses and without warranty.

Condition: like new (used), Year of construction: 2011, operating hours: 31,113 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 560 m/min, rapid traverse Y-axis: 560 m/min, rapid traverse Z-axis: 660 m/min, nominal power (apparent): 38 kVA, controller manufacturer: MITSUBISHI MSX-853 IV, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 900 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 2,513 mm, total length: 2,720 mm, total width: 4,224 mm, table width: 400 mm, table length: 400 mm, overall weight: 7,600 kg, spindle speed (min.): 12,000 rpm, CNC controller: MITSUBISHI MSX-853 IV Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 660 Distance spindle nose - table surface mm: 80-640 Feed rates m/min: 0-60 Worktable Number of pallets: 2 Table dimensions mm: 400 x 400 Maximum workpiece size (D x H) mm: 630x900 Max. workpiece weight kg: 400 APC time s: 9 División estandar Grados: 360 - 0.001º Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 15/11 Spindle torque Nm: 110 Bearing Inner Diameter mm.: 80 Njdey Rn Nbjpfx Aqvjwg Tipo: SJ-2B4351TK Tool system Tool magazine slots: 40 Max. Tool Diameter: 70 With free neighboring places mm: 170 Max. Tool Length mm: 450 Max tool weight kg: 8 Tool Shanks : MAS-BT40 Equipment Chip conveyor Workarea light 4th axis Cooling Tank capacity: 170L High-pressure bar: 15 Machine running times Under power: 64.734 Rated power kVA: 38 Operating Time: 31.113 Basic machine dimensions / weight Length mm: 2.720 Width mm: 4.224 Height mm: 2.513 Weight kg: 7.600

Year of construction: 2008, condition: good (used), Pressbrake LVD - PPEB EASY FORM 320/40 MACH-ID 7712 Make: LVD Type: PPEB EASY FORM 320/40 Control: CADMAN Year: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Specifications Metric US Standard Max. bending length 4000 mm Distance between column 3150 mm Max. pressing force 320 T Dis. Beam - Table 570 mm Beam stroke 300 mm Nwedonvduzepfx Aqveg Table Width 200 mm Troth beam 400 mm Approch speed 120 mm/min. Working speed 14 mm/min. Return speed 130 mm/min. Adjustment X-Axis back gauge 1000 mm Control CADMAN Power 42 kW Dimensions (Estimate) Length 5800 mm Width 2300 mm Height 3800 mm Weight 23000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2006, total length: 4,000 mm, total width: 2,500 mm, plate height: 300 mm, Manufacturer: PAMA Type: Floorplates Year of manufacture: 2006 2 units available matching cast iron floorplates/bedplates Integrated leveling chambers Nwedpewpvcyofx Aqvog Can be used in combination with PAMA SPEEDRAM 1000 Machine 8643 Testing area Mounting area Measuring area Calibration area Specifications Metric US Standard Length 4000 mm Width 2500 mm Height 300 mm Number of T-slots 10 Distance between T-slots / Pitch 250 mm T-slot size 26 mm Weight per plate approx. 7800 tons Number of matching pieces 2 Dimensions (Estimate) Length 4000 mm Width 2500 mm Height 300 mm Weight 7800 kg Please note: The information on this page was obtained by us to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you check all important details.

Condition: good (used), total length: 4,000 mm, total width: 2,000 mm, plate height: 295 mm, Manufacturer: STOLLE Type: DTS Year of manufacture: 1990 Specifications Metric US Standard Length 4000 mm Width 2000 mm Height 295 mm Number of T-slots 4 T-slot spacing / interval 400 mm T-slot size 42 mm Weight per plate approx. Nwodpfx Aswp E Nceqvsg 6000 kg Dimensions (Estimated) Length 4000 mm Width 2000 mm Height 295 mm Weight 6200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, you will not represent or constitute contractual terms. We recommend you verify all important details.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Nwsdpfx Aqsxf E Twsvjg Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, pressure 3,3 bei 6bar t dayligth 250 mm stroke 70 mm work stroke 10 mm table surface area 220x190 mm throat 150 mm weight of the machine ca. 350 kg Nwodpfx Aqjy Umf Aovog

Condition: like new (used), Year of construction: 2022, operating hours: 2,574 h, functionality: fully functional, machine/vehicle number: Roboter 1073651 / Steuerung 3100062 / Lineareinheit 152938, load capacity: 210 kg, The KUKA KR 210 R2700-2 (QUANTEC-2) industrial robot system consists of a 6-axis robot with a 210 kg payload and a reach of 2701 mm, combined with a KR C4 controller and a KL 4000 linear unit measuring 12.50 m in length. The system is in used / like-new condition with only 2,574.03 operating hours. Manufactured between 2021 and 2022, this unit is suitable for applications such as material handling, welding, gluing, assembly, and large-scale automation. It comes equipped with software options including SafeOperation, GlueTech, ExpertTech, and Profinet MS, and is supplied with 3x 400V / 25A power. Nwedpfx Aqoy Ntv Rjvsg

Condition: used, Year of construction: 1998, Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Nsdstp Tv Espfx Aqvswg Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (1990/2001), left/right: - RTV-27/25, extension inlet conveyor washing machine, year 1990 - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 - RSVN-38/25A, frame set section, year 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year 2001 - RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 - FPS-36/25U2T, gas filling press for argon, year 2001 - RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 - RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 - APKV-25/2, 2-track cork applicator, year 2001 Nwedpfx Aoy Sv Twsqveg - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalogue, Beckhoff PC, year 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 litres, liquid hardener 200 litres) and SI (base 200 litres, hardener 20 litres), year 2001 Availability now from our stock in Hofkirchen/Austria

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (2001/2007), left/right, for triple units, shape units according to Lisec shape catalogue and 4-sided stepped units: - RTVN-32/25WE, inlet conveyor (3,2 m length), year 2007 (!) - RTL-25VN, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower, year 2007 (!) - RTVN-16/25ST, outlet conveyor (1,6 m length), year 2007 (!) – RSVN-38/25A, frame set section, year 2001 Nsdpfx Ajy Sv Sgjqvswg – RTVN-15/25MZ, measuring zone for gas filling press, year 2001 – RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 – FPS-36/25U2T, gas filling press for argon, year 2001 – RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 – RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 – APKV-25/2, 2-track cork applicator, year 2001 – RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 – VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, year 2001 – DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 All machines were working properly until dismantling and are now available from our stock in Hofkirchen/Austria and from our stock in Oroshaza/Hungary

Condition: used, workpiece length 4000 mm roll diameter 60 mm Wheel width 290 mm weight of the machine ca. 120 Kg Nwsdjy Umb Rjpfx Aqvog dimensions of the machine ca. 4,0 x 0,4 x 1,0 mm Roller Conveyor – Height-Adjustable Frame

Condition: good (used), 4000 Insert grid 128 x 79.5 x 3cm Used goods, very good condition, see pictures. Support bar height 30 mm Nsdpfxjrxtd Tj Aqvewg Support bar thickness 2 mm Mesh size 7 x 3.5 cm Galvanized Negotiated price: € 25,-- net per piece Price from 70 pieces 22.50 net per piece, larger quantities on request! 35 pieces per pallet Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: like new (used), Year of construction: 1996, functionality: fully functional, Groninger DFVK 4000 - KVK 106 B High-performance filling and closing system for vials - unused, as good as new This powerful filling, stopper inserting and flanging machine has never been put into operation and is in as good as new condition. It is ideal for the precise filling and secure closing of vials with an output of up to 12,500 objects per hour, depending on the medium and dosage. Technical specifications Filling quantity: up to 100 ml Object size: max. Ø 52 mm / height 180 mm Stopper size: max. Ø 32 mm Cap size: max. Ø 36 mm Format sets for vials: 2R, 6R/8R, 10R, 25R, 50H, 100H Includes: stainless steel dosing pumps, rubber stoppers & aluminum cap formats (Ø 13 mm & 20 mm) Filling and closing process sequence Feeding & filling: Vials are separated on a rotary table (Ø 80 cm), transported and filled with piston pumps using below-level filling. Pre- and post-gassing possible. Stopper insert: 4-lane sorting machine with vibrating chutes ensures precise positioning and pressing in of the stoppers (pick-up process). Flanging: Flip-off caps are fed in and securely closed with 6-position flanging rollers (individually adjustable contact pressure). Output: Vials are processed directly or prepared for freeze-drying. Special features Robust stainless steel construction with safety cover User-friendly: Control via Siemens S5 control cabinet Nwsdpfxevyic Aj Aqvsg Including English machine and operating manual Technical data Manufacturer: Groninger, Crailsheim Year of construction: 1996 Machine no.: 4005 / 4008 Electrical supply: 220/380V, 3 phases, 50 Hz Dimensions: Machine 450 x 260 x 265 cm, control cabinet 120 x 60 x 215 cm Weight: approx. 1,400 kg This unused, high-quality filling and closing system is ideal for pharmaceutical, biotechnological or cosmetic companies that want to expand their production capacity. Attention: Vial washer and Steri Tunnel not available. Contact us for more information or a customized offer.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, We offer this as new MHM SPM 4000 12Z08 70x100 screen printing machine, year of manufacture 2015. Nedpoy I Iz Ejfx Aqvjwg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F Nsdpsym D E Asfx Aqvowg table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Nwjdpfx Aeyx Exvoqvsg

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with adjustable feet -Length: 7990 mm -Width: 2480 mm Njdpfjy Ndtyjx Aqvswg -Height: 350 mm -Sheet thickness: 30 mm -Quantity: 2 mounting plates available -Price: per piece -Transport dimensions: 7990/2480/H350 mm / 1200/800/1000 mm/piece -Weight: 9500 kg/piece

Condition: new, Year of construction: 2026, functionality: fully functional, conveyor belt width: 475 mm, warranty duration: 24 months, total width: 2,055 mm, total length: 940 mm, total height: 535 mm, input voltage: 400 V, table length: 2,055 mm, empty load weight: 95 kg, opening width: 30 mm, working width: 475 mm, roller length: 500 mm, space requirement height: 810 mm, space requirement length: 940 mm, space requirement width: 850 mm, New machine - new design Nsdpfxsivdixe Aqvjwg Successor to the STM 514 24-month warranty on parts Advantages: + Robust, compact tabletop sheeter + Push-button operation + Suitable for all types of dough for rolling and rolling + Stainless steel tables can be folded up on the left and right + Scrapers can be easily removed without tools + Fast spare parts delivery within 1-2 business days Technical specifications: - Belt width: 475 mm - Roller width: 500 mm - Table length: 2055 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on the product) - Speed: approx. 50 cm/sec - Motor power: 0.75 kW - Connection: 400 V - 3Ph - 50Hz - Protection: 16A CEE plug - Dimensions: --- Working position: 2055 x 940 x 535 mm (WxDxH) --- Rest position: 850 x 940 x 810 mm (WxDxH) - Net weight: 95 kg optionally possible at extra charge: - Machine equipped with original RONDO synthetic belts (to roll dough & marzipan or fondant) + €499 net The exchange of belts may extend the delivery time!