Used Muhr Und Bender / Mubea Hole Punching Machine for sale (68,392)

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Hnjdjz S T Injpfx Akrou Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: used, functionality: fully functional, PUNCHING MACHINE FICEP 604 N -Machine dimensions mm approx. 150x65X220 (H) cm, Weight kg 1500 Hodpfx Aown Hytskrenu -Power supply voltage 380 V 50 H -Motor power kW 7.5 -Punching force ton 60 -Max. hole of 32 mm executable on a thickness of mm 16 -Max. diameter with large hole equipment (optional) mm 100 -Working height mm 950 -Punch stroke mm From 0 to 40

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Hodex Ehg Tepfx Akronu

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator Hedpfszu Ryhsx Akrjnu • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: used, functionality: fully functional, Year of construction: 1994, machine/vehicle number: 070027, control type: CNC control, punching force: 150 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, overall weight: 8,000 kg, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1994. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Type: 9095 — Serial number: 070027 Year of manufacture: 1994 Max. punching force: 150 kN Machine weight: 8,000 kg Hodpfjz E R S Asx Akrjnu Power supply: 380V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling and cassettes. For reference, standard specifications of this model: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email – we will be happy to answer any questions or send further photos/videos of the machine in operation.

Condition: good (used), Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos Hnsdpfxjik Sl Hj Akrsu -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Hnodpfx Aksztyxdoreu Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: good (used), Kolbus VDB Cover bender This machine is in very good condition and ready to use. Manufactured by Kolbus, Germany. The pressure rollers feature smooth adjustment of the gap and cover straightening power. The entire unit is mounted on a convenient base with wheels. Working width: 750 mm Power supply: 380V Weight: 150 kg Hnodpoz Rk Rdofx Akrju

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left Hedpfx Ajz Ixh Rjkrenu y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: repair required (used), functionality: not functional, Drilling machines for turned parts – TRIADE FIR-6 Hnsdpfxozmxf Aj Akrsu Defective – PLC controller missing.

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Hnedszryy Sjpfx Akrou Technical data: - Cylinders: 6 - Hold-down units: 3 - Pressing area: 260 x 145 cm

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 2,000 kg, input voltage: 400 V, SENTE Makina TFWSI-1600 HVAC machine, designed for the production of large-diameter ventilation ducts. Model: TFWSI-1600 Pipe diameter range: Ø100 – 1600 mm Material: galvanized steel, aluminum, other sheet metal Material thickness: approx. 0.4 – 1.0 mm (depending on the configuration) Production speed: up to approx. 50 m/min Cutting: pneumatic rotary knife Control: PLC with touchscreen panel Power supply: 3-phase Year 2023, as new condition. Hodpfez D Ippex Akrsnu

Year of construction: 1986, condition: ready for operation (used), We offer this ready for use K. Widmann 0271E.20 Punched pockets machine, year of construction 1986. Control voltage: 220 V Frequency: 50 Hz Operating voltage: 380 V Hnjdez Akq Nopfx Akrju Serial number: 89024E011 Circuit diagram number: A If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3,358 h, machine/vehicle number: K22268, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: JORNS, working width: 6,410 mm, folding beam adjustment: 200 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, back gauge speed R-axis: 283 mm/s, back gauge travel distance R-axis: 1,250 mm, back gauge travel distance Z-axis: 1,250 mm, overall weight: 13,000 kg, total length: 8,500 mm, total width: 3,354 mm, total height: 1,938 mm, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, We offer this used Jorns JDB-150G-DP-1250-JC100-6.4-dsp panel bending machine for sheet metal, manufactured in 2023. Year of manufacture: 2023 Model: JDB-150G-DP-1250-JC100-6.4-dsp Rated current: 80 A Operating voltage: 3 × 400 V Frequency: 50 Hz Control voltage: 24 VDC Maximum hydraulic pressure: 210 bar Maximum pneumatic pressure: bar Hnsdoz Dillepfx Akrou If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Drilling motor 1.5 kW, 380 Volt, 50 Hz, Hsdoz Nkutepfx Akrjnu Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Special stop system for window frames and window mullions Weight approximately 130 kg as is, at the Seevetal location, excluding transport, EXW (Ex Works), subject to prior sale.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 150 583, total height: 3,975 mm, ram adjustment: 125 mm, installation height: 410 mm, table height: 1,220 mm, total width: 2,725 mm, total length: 3,510 mm, table length: 1,500 mm, table width: 1,200 mm, pressing force: 200 t, control cabinet height: 2,200 mm, control cabinet length: 340 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 900 mm, distance between side stands: 900 mm, distance between stands: 1,520 mm, overall weight: 3,700 kg, year of last overhaul: 2025, ATTENTION: The machine sustained transport damage. The machine is currently disassembled. Components can be inspected. The machine will be completely mechanically and electrically overhauled/repaired before delivery in 2026/2027. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Stroke rate: 30 - 180/min Center height: 410 mm Table dimensions: 1500 x 1200 mm (The press will be delivered with a new table top; T-slot design can be freely selected) Ram size: 1500 x 1000 mm Hjdpfxjw H Arvj Akrenu Control system: SIEMENS S7 1500 series, PC 477E, year of manufacture 2020.

Condition: used, Year of construction: 1994, Product information "Boschert Hydraulic CNC Punching Machine" Type / Model: Boschert EL 750 digital Condition: Used Year of manufacture: 1994 Technical data Working area & dimensions Overhang (Y-axis): 750 mm Travel range (X-axis): 1500 mm Max. sheet size (without repositioning): 720 x 1700 mm Performance data & capacity Max. hydraulic punching force: Standard 280 kN Max. sheet thickness*: up to 12.7 mm Max. punching diameter: Ø 105 mm Stroke rate: max. 100 strokes/min Tooling: Original Trumpf® tool system Positioning accuracy Hnsdpjzp Raqsfx Akrsu with 2-axis digital display: ± 0.1 mm Connection power: 4 kVA Control voltage: 220 V Required fuse rating: 3 x 16 A Installation dimensions (W x D x H): approx. 3400 mm x 1580 mm x 1600 mm Weight: approx. 3400 kg Equipment - includes various tools / accessories * Material-dependent, usually designed for thin sheet metal up to 6 mm at full diameter or any shape that fits into a circle of Ø 105 mm Inquiry item: Transportation costs in individual offer.

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 070691, control type: CNC control, actuation type: mechanical, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, table length: 2,070 mm, table width: 1,280 mm, overall weight: 8,000 kg, power: 14 kW (19.03 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine (with Multitool) Hnjdpfxoz E Sa Io Akrsu For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1998. Well maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Type: 9095 — Serial number: 070691 Year of manufacture: 1998 Max. punching force: 165 kN Machine weight: 8,000 kg Power supply: 220V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling, cassettes, and Multitool. For reference, the standard specifications for this model are: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email. We will be happy to answer any questions and provide further photos or videos of the machine in operation.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation Hodpfoz Rl Nzsx Akrjnu - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: excellent (used), Year of construction: 2024, operating hours: 3,540 h, functionality: fully functional, punching force: 280 t, X working area max.: 3080 mm Y working area max.: 1540 mm Operating hours: 3540 hrs Control: CNC control LABOD with graphics Standard equipment Hydraulic punching machine - Punching force: approx. 280 kN (28 tons) - Throat depth: approx. 1750 mm - Max. punching diameter: 70.0 mm - Max. stroke height: 90 mm, steplessly programmable up and down via control - Table width left + right: 3430 mm each - Table depth: 3160 mm - Table height: 900 mm + 8 easily exchangeable cassette holders + Rotary drive, tool holders top and bottom continuously rotatable 360° + 1 piece, indexable Revotool tools + Programmable clamp positioning + Scrap slug extraction system + Spray device + Brush table + Brush table extension tables + Multitalk, USB, SD memory card and network connection + Digital stroke height adjustment + Three-sided safety light barrier + Various intermediate matrix plates for Trumpf tooling sizes 1 and 2 + Tooling package + 1 set of keys and operating manuals Hnsdpfez Rmanjx Akrsu + Boschert EasySharp tool grinding device

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Punching force: 220 kN Sheet metal thickness: 8 mm Sheet metal thickness for stainless steel: 4–6 mm Working area: 2,535 × 1,280 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Number of stations: 18 Number of clamping jaws: 3 Number of tool cassettes: 4 pcs Part chute for parts up to: 500 × 500 mm MACHINE DETAILS Hnsdjz Izqujpfx Akreu TFT color screen: 10.4" Floppy disk drive: 3.5" EQUIPMENT Rotatable tool holder Automatic repositioning system with pressure plate Automatic tool changer with 18 stations 3 clamping jaws Programmable part chute for parts up to 500 × 500 mm Programmable pressure plate with pre-selectable clamping force Good parts container Tool spray lubrication 2nd lubricant tank Punch scrap extraction Chip bin Quick shut-off for hydraulics Order table TFT color screen 10.4" 3.5" floppy disk drive Graphic programming ToPs 2000 RJ45 network connection 2-beam safety light curtain Network connection including installation Multitool control Repositioning cylinder 4 tool cassettes

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Hnedpfozdf Utjx Akrsu Dowel bore in the ram, diameter x depth: 50 mm Adjustable ram stroke: 20 – 100 mm Ram adjustment: 100 mm Stroke adjustable in infinitely variable steps: 50 – 300 mm Drive power: 22 kW Weight: approx. 18,000 kg incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Power: 5.5 kW Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 1 unit of Flexor 380 2C, used, factory-reconditioned Machine speed max. 300 m/min Web width max. 380 mm Web width min. 190 mm Unwind diameter max. 800 mm Unwind shaft, pneumatic, D 76 mm Punching unit with re-register – 2 units Punching width max. 380 mm Magnetic cylinder, circumference min. 10” (80T) Magnetic cylinder, circumference max. 24” (192T) Matrix strip unwinding, max. D 600 mm Slitting unit with 7 blade holders 1 Rewinder, max. D 550 mm Spindle, D 76 mm Year of manufacture 2015 Hnodpfez Sriqox Akrju Accessories (optional): Used magnetic cylinders: 80, 87, 92, 94, 95, 98, 96, 100, 102, 104, 106, 112, 116, 120, 132, 136, 138

Condition: refurbished (used), Year of construction: 1990, machine/vehicle number: 77168, functionality: fully functional, pressing force: 63 t, stroke length: 165 mm, table width: 650 mm, table length: 1,600 mm, total length: 2,300 mm, total width: 1,650 mm, total height: 2,220 mm, overall weight: 3,800 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hubtischstanzmaschine (Hydraulic table punching machine) - Punching force 630 kN - Table dimensions 1600 x 650 mm - Activation via push button or single-stroke safety curtain - Oil filter new, hydraulics inspected, piston seals new - Electrical system completely repaired and partially renewed - Mechanics completely overhauled - Condition like new, new paint RAL 6011 green - Incl. punching plate P1/78NE, 10 mm thick Hjdpfxjz Rmyhs Akrenu - Without hydraulic oil Price on request

Condition: good (used), Year of construction: 2005, functionality: fully functional, power: 3.73 kW (5.07 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 35 t, operating speed: 5 mm/s, table width: 510 mm, table length: 1,000 mm, total length: 1,690 mm, total width: 1,490 mm, total height: 1,870 mm, overall weight: 1,750 kg, Hydraulic punching machine with 5 stops and Trumpf-type tooling. Hedpfx Akszt Ih Hsrenu