Used Nylon Ø100 Mm / 8 M for sale (1,12,044)

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chucks: Ø 8-20 mm -Outer diameter: Ø 32 mm -Cone: Ø 40 mm -Cone length: 15 mm -Weight: 5 kg Hnjdpeb A Rx Uofx Abhsp

Condition: good (used), V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 8-groove pulley type SPB 224x8 TB 3535 -V-belt width: 17 mm Hnodpfxou Sv Ugs Abhjp -Mounting: Taper bushing Ø 60 x 90 mm (can be changed) -Dimensions: Ø 230 x 160 mm -Weight: 25 kg

Condition: used, Dosing rotary valve, rotary valve, dosing lock, rotary valve for conveyor screw, transport screw, screw conveyor, conveyor technology, pipe conveyor screw -Manufacturer: Torex, 8-blade rotary valve with gear -Inlet opening: Ø 265 mm Hnjdpfxsnzpyko Abhsp -Outlet: 250 x 245 mm -Transmission: Motovario i= 50 -Drive shaft: see photos for dimensions -Dimensions: 540/410/H360 mm -Weight: 100 kg

Condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -Roller conveyor: driven, with sensor switch / without control -Drive motor: 0.37 kW -Speed: 18 m/min -Roller width: 700 mm -Roller diameter: 64 mm Hsdpfx Aov Haq Rsbhenp -Axle spacing: 200 mm / adjustable -Conveying length: max. approx. 2730 mm -Overall dimensions: 2800/775/H515 mm -Weight: 201 kg

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, tube bending tool -Pipe Bending Tool: 1 piece -Profile diameter: 3/8" -Intake: Ø 36 mm -Dimensions: 100/75/H50 mm -Weight: 1.2 kg Hedomu Rnpjpfx Abhenp

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel Hodpfsya Iaqjx Abhsnp - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, Year of construction: 1987, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Hnjdpoyy Tqcefx Abhjp Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Year of construction: 2018, condition: like new (used), Interroll 113S drum motor 800mm drive roller, 0.18Kw, 24m/min more pieces Manufacturer: Interroll Type: 113S Roller width: 800 mm Axle length: 800 mm + 2x 30 mm axle stub Cylinder diameter: 120 mm Flat width: 20 x 35 mm Nominal speed: vN 0.56 m/s voltage: 400v 50Hz 0.62A Nominal speed: 0.4 m/s Housing material: stainless steel Protection: IP66 Weight: approx. 15.3 kg Hnedpfsma Rtasx Abhop

Condition: used, Max. bending length: 2000 mm Max. sheet thickness: 8 mm steel Clockwise and counterclockwise rotation Mechanical rear roller conveyance Hjdpfx Absmhm Elohjnp Emergency stop switch Conical rounding possible

Condition: excellent (used), Year of construction: 1999, Technical specifications: Max. cutting width: 4050 mm Max. cutting capacity for steel: 0.5 - 8.0 mm Max. cutting capacity for stainless steel: 6.0 mm Motor-adjustable parallel stop: 1000 mm Programmable cutting gap adjustment Programmable cutting angle adjustment NC control: AMADA OPE1 Sheet metal holding function Motor power: 15 kW Dimensions (length x width x height): approx. 4800 x 2200 x 2150 mm Weight: approx. 12 tons Hnsdpfx Abezcyn Sjhjp The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2000, Technical specifications: Working width: 6100 mm Max. bending capacity: 10.0 mm Max. bending angle: 8.0 mm Diameter of upper roller: 470 mm Diameter of side rollers: 250 mm Hardened rollers Conical bending unit through angled positioning of the two side rollers Hodpfx Abezbmw Djhonp Mobile control panel Hydraulic folding bearings Motor power: 31 kW Dimensions (length x width x height): approx. 8000 x 3200 x 2900 mm Weight: approx. 30 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut) Hodpjru Un Hjfx Abhenp

Condition: used, Year of construction: 1989, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550Technical Data: Max. cutting length: 1,550 mm Throat depth (side clearance in frame): 50 mm Sheet passage: 16 mm Cutting angle adjustable: 0.5° – 2°30′ Strokes per minute: 25 – 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil capacity: 300 liters Total connected load: 20.1 kW Overall dimensions (L × W × H): 2,130 × 3,260 × 2,360 mm Equipment: CNC control SIEMENS S5 for numerical sheet metal backgauge control Sheet support device with motorized scrap separator Sheet discharge with conveyor belt Blade clearance and cutting angle programmable via control Spare blades included Shear blades suitable for material up to 750 N/mm² tensile strength Separate hold-down operation for cutting along marked lines Hold-down pressure adjustable and readable from the front 2 swing-away backgauges Finger guard with handle recess Ball rollers integrated in the support table Hnedpfx Absvaatlohsp Angle gauge with vernier scale Foot switch Condition:Used, in good condition

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm Hodpfx Asxvc N Debhsnp N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Hodpfxjxvc Rzj Abhonp Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar passage: 34 mm, controller model: Fanuc 21T Modell B, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bar capacity: 34 mm MACHINE DETAILS CNC control: Fanuc 21T Model B EQUIPMENT CS axis left CS axis right Approx. 26 fixed tool holders 2x driven tool holders (1x axial, 1x radial) Hainbuch collet chucks left and right Chip conveyor Manuals Hodpfsyrf Ensx Abhjnp Note: The bar feeder is not included in the offer.

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, clear span: 2,000 mm, total length: 11,04,730 mm, total width: 2,000 mm, total height: 8,500 mm, load per truss pair (max.): 2,100 kg, load capacity per storage section: 12,000 kg, number of shelf rows: 22, product height (max.): 2,000 mm, mesh size: 50 mm, hole spacing: 50 mm, shelf height: 8,500 mm, pallet spaces: 12,500 euro pallets, STOW pallet racking – immediately available | Block pricing | carriage paid (block) | installation Immediately available STOW rack blocks from dismantling – uniform configuration, excellent condition, fast delivery. Block purchase: carriage paid, EU-wide installation. Key features: Block A now, Block B ~3 weeks “Finished Goods” rack: ~2,000 mm deep, ~8,500 mm high, beams 2,700 / 1,800 mm Large stock of accessories: mesh decks, back mesh, anti-push-through, DSS holders Hjdpfx Asxpu R Tsbhonp Block pricing vs. single items • free delivery on block purchase Installation & hand-over by our team • Load signage on request Condition: very good industrial, dismantled & sorted Specs (short): Uprights: STOW PNUPA 12, 8,500 mm (85×65×1.75 mm) Beams: STOW PNB 0488, 80×50 mm, L = 2,700 / 1,800 mm Depth: approx. 2,000 mm • Typical bay examples on request Accessories: mesh decks (deep supports), back mesh, anti-push-through, safety locks, frame connectors, row spacers Available per block (approx.): 216 uprights 8,500×1,000 PNUPA 12 • 216 additional uprights 2,850 beams 2,700 mm PNB 0488 • 90 beams 1,800 mm PNB 0488 2,950 mesh decks • 50 lm back mesh (8,500 mm high) 605 anti-push-through • 1,210 DSS holders • 1,463 row spacers (1,000 mm) 3,040 safety locks/clips • 228 frame connectors (short) Services / options: EU-wide transport (block purchase: carriage paid) Installation incl. anchoring, leveling & hand-over report Layout planning, structural verification, load signage Cleaning/repainting, spare parts Commercial terms: Payment: 30% down · 30% upon loading · 40% after delivery completion Prices: excl. VAT • Reservation possible with down payment • while stocks last Condition & inspection: Dismantled & sorted; visual inspection via photos/video available. Share your destination and desired option (Block A/B/both) – we’ll send an immediate block quote (€/pallet position installed) and reserve a delivery/installation window.

Condition: excellent (used), Year of construction: 2007, Technical specifications: Max. cutting width: 4050 mm Max. cutting capacity for steel (ST40): 8.0 mm Max. cutting capacity for stainless steel: 6.0 mm Hedpjywd Ndsfx Abhjnp Max. cutting capacity for aluminium: 8.0 mm Motorized adjustable backgauge: 1000 mm Cutting gap adjustment Cutting angle adjustment: 2.2° Sheet support device Motor power: 15 kW Dimensions (L x W x H): approx. 4800 x 2200 x 2150 mm Weight: approx. 11.5 tons The seller is not liable for typographical or data transmission errors. The machine is in condition, technically and visually, corresponding to its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 22,400 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 2, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 22,400 mm, support length: 3,600 mm, 2 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 beam levels, load capacity 3000 kg. - 8 upright frames (RM4511 - RAL5019) - 16 base plates, shims, fastening material - 16 floor anchors (ZZBA1210) - 36 individual beams (T3615 - RAL2008) - 2 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivery free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement. Hjdpfszl N Apex Abhjnp

Condition: new, For sale: a new, shock-absorbing ring roller for conveyor belts. This item comes from warehouse stock (new, unused), has not been installed, or put into operation. Technical data: • Type: shock-absorbing ring roller • Outer diameter: Ø180 mm • Overall length: 565 mm • Weight: approx. 27.75 kg • Steel construction • Rubber shock-absorbing rings • Bearing-mounted • Hexagonal shaft ends Hodpfxjzcq Uco Abhsnp Application: • Conveyor belts • Mines • Gravel pits • Quarries • Cement plants • Recycling plants • Transport of bulk materials and aggregates Condition: • New – warehouse stock • Not used • May have minor signs of storage • Visual condition as shown in the photos Included: • 1x shock-absorbing ring roller Ø180 mm L=565 mm The price is for 1 piece.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,050 kg, total length: 45,600 mm, total height: 3,500 mm, shelf height: 3,500 mm, number of shelf rows: 8, load capacity: 9,150 kg, frame height: 3,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 45,600 mm, 8 double-bay pallet racks (M35112711-3) each 5.7 m long, 3.5 m high, 1.1 m deep, each with 2 bays, 2.7 m wide, Bdjbp Up Ejy Sxfvo Umsd each with 3 crossbar levels, shelf load capacity 3000 kg. Hjdjziigispfx Abhsnp - 24 frames (RM3511 - RAL5019) - 48 base plates, shims, screws - 96 floor anchors (ZZBA1210) - 96 individual crossbars (T2711 - RAL2008) - 8 load capacity signs (BSMcP) Frames are screwed together, not pre-assembled. Freight / Delivery: - max. 20 working days after receipt of payment - delivered free to the construction site / assembly location - unloading from the truck is carried out by the buyer with their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are made according to individual agreements.

Condition: good (used), Lynette Hnsdod S Algjpfx Abhsp Maximum height 330 mm Diameter 185 mm Base length 330 mm Base width 140 mm Overall width 600 mm Overall height 650 mm

Condition: good (used), Quadruple steel holder Steel height: 60 mm Hsdedcwzuopfx Abhsnp Dimensions: L. 190 x W. 185 mm

Condition: good (used), Upper support Hodsdq Nvijpfx Abhenp Sled width 145 mm Height 72 mm Bolt circle 180 mm Centering pin diameter 70 mm Contact surface 240 x 220 mm Weight 23 kg Shipping dimensions: L 490 mm W 220 mm H 270 mm

Condition: excellent (used), Professional milling head from the renowned brand Sandvik Coromant. Working diameter: Ø80 mm – ideal for roughing and finishing machining of steel, stainless steel, and cast iron. Mount: SK40 / ISO40. Model: 346.220242R25. Design with indexable inserts – currently equipped inserts are in good condition. High precision, rigidity, and durability – industrial-grade head for CNC machining centers and milling machines. Original Sandvik product – a leader in cutting tool technology. Condition: used, in very good technical condition – ready for immediate operation ✅ Ideal for facing, face milling, and processing large surfaces ✅ High performance and long service life thanks to high-quality inserts ✅ Premium tool – German and Swedish quality Hnedpoxld Awofx Abhsp