Used Odenberg Alpha for sale (261)

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 11H82290, Exercise Book Manufacturing Machine E.C.H. WILL GmbH / Model Alpha RF (manufactured in 2012) For the production of finished exercise books with pre-printed covers Technical Data Mechanical paper web speed/minute: max. 300 m Working strokes/minute – converting section: max. 60 At 4-up production – books/hour: max. 14,400 Reel width: max. 960 mm / min. 580 mm Reel diameter: max. 1,200 mm Printing length (cylinder circumference): max. 670 mm / min. 300 mm Cut-off length – cross cutter: min. 300 mm For exercise book production: max. 500 mm For skid production: max. 670 mm Adjustment steps: 5 mm Number of cuts/minute – cross cutter: max. 1,000 Finished article size range (unbound side x bound side): max. 245 x 480 mm min. 145 x 145 mm Sheet count: min. 5 / max. 50 Article thickness (unfolded): max. 5 mm Main Equipment Reeling Units • 2 x shafted reeling units Ruling Tower • 1 x ruling tower for a maximum of 4 ruling inkers Note: The ruling tower is equipped for either: • 2-color ruling from 1 web, or • 1-color ruling from 2 webs Longitudinal Perforating Unit (for 1 web operation) • 1 x longitudinal perforating unit Cross Cutting Unit • 1 x 1-knife cross cutting system Ibodpfjzq Av Tsx Agyoc allowing quick and easy knife exchange and adjustment Anti-Static System • Anti-static equipment for paper handling Sheet Overlapping Device • 1 x sheet overlapping device Sheet Counting and Collating Unit • Sheet counting and collating system Cover Feeders (1st / 2nd / 3rd / 4th Cover Feeder) • Will automatic feeder for pre-printed covers Deep Pile Delivery • Deep pile delivery unit, in-line system for collecting large size sheet sections Stitching Unit • Wire size: No. 24–26 • 9 x stitching heads Sectional Folding Unit • 1 x sectional folding unit Square Back Pressing Unit • 1 x square back pressing unit Trimmer • 1 x fore-edge trimming knife • 3 x separating knives • 2 x lateral trimming knives Corner Rounding Device • Corner rounding unit for finished exercise books Book Turning Unit • Book turning station for even stacking Book Stack Discharge • Book stack delivery • Book flipping & title design mixing delivery table (retrofitted) Electrical Equipment • Device for maintaining suitable temperature for electronic components in switch cabinets Pneumatic Equipment • Pneumatic system for machine operation

Condition: ready for operation (used), Year of construction: 2021, A Fanuc CNC drilling and machining center is available. Travels X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle speed: 24000rpm, spindle power: 5.5kW, torque: 7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool positions: 21, tool interface: BT30, positioning accuracy: 0.006mm, repeatability: 0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/2200mm, weight: approx. 2500kg, control: Fanuc 31i-B5, power-on hours: 6534h, operating hours: 473h. Documentation available. An on-site inspection is possible. Ijdpfx Aszlt Shsgysbc

Condition: good (used), Year of construction: 2014, Approx. 4 units of compact label dispensers for applying pre-printed labels, Weber, Alpha Compact – used: Price per unit, ex-works: only €2,950.00 (net)! Manufacturer: Weber Type: Alpha Compact Ibedpjzbylbofx Agyec Year of manufacture: 2014 Includes stand and applicator 100 – 240VAC Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: used, Year of construction: 2008, Wire erosion / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 310 mm max. workpiece size X: 1050 mm max. workpiece size Y: 820 mm max. workpiece size Z: 300 mm max. workpiece weight: 1000 kg with AWF ( Automatic Wire Feeding ) U / V axis: 200 / 200 mm submerged cooling unit FANUC Series 310iS-WA5 control Automatic Wire Feeding (AWF) Additional precision rotary/indexing unit by Detlev Hofmann 6 axes according to the machine control Chiller included Ibsdpfx Agsz D U H Uoyjc Work area lighting Glass scales on X/Y axes Touch probe Work tank interlock and wire break detection Machine weight: approx. 3,000 kg Connected load: 13 kVA

Condition: ready for operation (used), Year of construction: 2021, Machine in good working condition and located within EU! Available now for transport. Ask for additional details! Ijdjxpvh Hepfx Agysbc

Condition: used, Year of construction: 1998, Control FANUC Series 16-W x-axis 320 mm y-axis 220 mm z-axis 180 mm u-axis 120 mm v-axis 120 mm rapid traverse (x) 900 mm/min rapid traverse (y) 900 mm/min rapid traverse (z) 450 mm/min rapid traverse (u) 450 mm/min rapid traverse (v) 450 mm/min Ibedszrh N Ujpfx Agyjc max. workpiece weight 250 kg weight of the machine ca. 1,5 t connected load 11 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 2010, condition: ready for operation (used), A CNC laser cutting machine Amada is available. Laser type: CO2, laser power: 4kW, connected load: 43kVA, max. sheet dimensions: 1500mm/3000mm, max. sheet thickness steel/stainless steel: 10mm/12mm, control system: Fanuc, power-on hours: 34401h, operating hours: 21713h, cutting hours: 11111h. Including loader and unloader. Documentation available. An on-site inspection is possible. Ijdpfjzkldysx Agyobc

Condition: used, Harrison Alpha 1350XS CNC Toolroom Lathe (2010) Swing Over Bed 350 mm Swing Over Cross Slide 196 mm Swing in Gap 535 mm Distance Between Centres 650 mm Maximum Turning Diameter 350 mm Spindle Speed Range 1 – 3,500 rpm Fanuc Oi-TD CNC control Harrison Alpha conversational programming Fanuc Manual Guide i Full ISO G-code programming capability Ibedpfx Agjzq Ddxjysc 2-axis CNC control (X and Z) Electronic handwheel operation Machine Weight Approx. 1,800 kg Machine Dimensions (L × W × H) 2,400 × 1,700 × 1,500 mm

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm Ijdpfx Aey Ed Ehsgysbc T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: used, functionality: unexamined, Ferwood Code: RU0011686 - Manufacturer Code: SP075-MF1-10-121-000 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer a refurbishment service; please contact us. 3KG 20X20X20 Ibodsymd Ikspfx Agyec

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,089 h, This 5-axis FANUC ROBOCUT alpha-1iD was manufactured in 2007. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, allowing for precise machining. The machine can handle a maximum workpiece weight of 1000 kg. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT alpha-1iD machine we have for sale. Contact us for further details. • Machine weight: 3000 kg • Number of Axes: 5 • X-Axis: 600 mm • Y-Axis: 400 mm • Z-Axis: 310 mm • U-Axis: 200 mm • V-Axis: 200 mm • Table load: 1000 kg • Main electronic connection: 200/220 V, 3-phase, 50/60 Hz • Machine type: CNC Wire EDM • Year: 2007 Iodpfxez Aigvj Agyjbc • Made in: Japan • Rated power: 13 kVA • Machine connected and available for inspection/testing.

Condition: good (used), ISEL SM Alpha Omega – 5-Axis CNC Machining Center with Double Spindle, Year of Manufacture: 05/2015. The machine is equipped with two high-performance high-frequency spindles, making it ideal for demanding applications in medical technology, precision engineering, micro-machining, and mold and prototype manufacturing. Technical Specifications: • Model: ISEL SM Alpha Omega • Year of manufacture: 05/2015 • Article number: 274507 SSZ6000 • Axes: 5 (X, Y, Z, A, B) Travel distances: • X-axis: 1800 mm • Y-axis: 1700 mm • Z-axis: 800 mm Ibsdsxiy Udspfx Agysc Spindles: • Quantity: 2 high-frequency spindles • Speed: up to 60,000 rpm • Power: up to 6 kW • Tool holding: HSK25 / HSK32 Machine dimensions: approx. 2800 x 2550 x 2950 mm Weight: approx. 1400 kg — • Linear motors in X and Y axes • Rotary/swivel fork head The machine is in well-maintained, regularly serviced condition and is ready for immediate operation. Inspection is possible by arrangement at any time. Including extraction unit. Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices plus VAT. Subject to change and errors excepted.

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Ibjdpfx Asdzqptsgyjc Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 Ijdpfx Agsw S Efzsyebc spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: used, functionality: unexamined, Ferwood Code: RU0011864 - Manufacturer Code: SP075S-MF1-10-1C1-2S - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer a refurbishment service. Please contact us. 3.5KG 20X20X20 Ijdpfx Asymd Ausgyobc

Condition: used, functionality: unexamined, Ferwood Code: RU0011867 - Manufacturer Code: SP075-MF2-20-121-000 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service; please contact us. 4KG 36X26X21 Ibjdpfx Agoymd Eceyjc

Condition: used, Year of construction: 2010, We offer a used FUJI FW3710 Wrapper VI a horizontal packaging machine of the Horizontal Form Fill-Seal / HFFS type, designed for automatic packing of products in film. The machine is suitable for production plants that require an efficient and repeatable system for individual product packaging. An HFFS machine forms the package from a roll of film, feeds the product, seals the package and cuts off the finished pack. This type of solution is commonly used for packing food products, portioned products, ready-made goods and various items requiring an aesthetic and sealed film package. Iodpezhm Saofx Agysbc The FUJI FW3710 Wrapper VI can be used as a standalone packaging machine or as part of a larger production line. The construction of this type of machine allows continuous industrial operation, reduction of manual work and improved repeatability of the packaging process. The FUJI packaging machine is a good solution for companies looking for a used flow-pack machine to automate the packaging of individual products. The unit can be used in the food industry, manufacturing, co-packing and production lines where fast film packaging is required. Technical data: Manufacturer: FUJI Model: FW3710 Wrapper VI Type: horizontal HFFS / flow-pack packaging machine Machine type: Horizontal Form Fill-Seal Machine Condition: used Main advantages: horizontal HFFS / flow-pack packaging system automatic forming, sealing and cutting of the package packing products in film from a roll repeatable individual packaging process can be used as a standalone machine or as part of a production line solution for packaging automation suitable for food and industrial products renowned FUJI manufacturer construction designed for industrial operation Applications: packing food products packing portioned products packing ready-made goods packing individual products flow-pack film packaging production and co-packing lines automation of the packaging process packing products requiring an aesthetic film package

Condition: used, functionality: unexamined, Ferwood Code: RU0011869 - Manufacturer Code: SP075S-MF2-20-1C1-2S - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer a refurbishment service, please contact us. 4KG 36X26X21 Iodjymd Iwepfx Agysbc

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, spindle speed (max.): 24,000 rpm, number of axes: 4, This 4-axis FANUC Robodrill alpha-T21iFL was manufactured in 2008. It features impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine is capable of a spindle speed of 24,000 rpm and a maximum feed rate of 54,000 mm/min. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill alpha-T21iFL vertical machining centre we have for sale. Contact us for further details. Isdsyvupropfx Agyebc • Max. feedrate: 54,000 mm/min • Spindle distance: 200 mm • Max. workpiece diameter on 4th-axis table: 300 mm

Condition: ready for operation (used), Year of construction: 2008, A Fanuc CNC drilling and machining center is available. Travel X/Y/Z: 700mm/400mm/330mm, distance from table to spindle nose: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, max. spindle speed: 10000rpm, spindle power: 26kW/5.5kW, torque: 35Nm/7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool stations: 21, tool interface: BBT30, positioning accuracy: 0.006mm, repeatability: 0.004mm, machine dimensions X/Y/Z: 2150mm/2050mm/2350mm, weight: approx. 2100kg, control: Fanuc 31i-B5, operating hours: approx. 9547h. Including chip conveyor and coolant tank. Documentation available. An on-site inspection is possible. Isdpfezlt Snsx Agyjbc

Condition: like new (used), functionality: fully functional, SHOWROOM Machine Horizontal filling and sealing machine APHPM-250G Ibjdpfxst H E D Sj Agysc Technical information: Max. bag width: 100-250 mm* Max. bag length: 150-400 mm* Speed: 8-12 pieces/min Usable bag types: Flat bags, stand-up pouches, zipper bags Bottom depth: 40-140 mm* With our horizontal filling and sealing machines for pre-made bags, you are guaranteed to make the right choice! This machine series impresses with its ease of operation and a simple, compact design. Our packaging machines seal pre-made bags with high strength, ensuring that your products are safely packaged for transport and retail. Thanks to our innovative technology, high productivity of the filling and sealing machines is ensured. Our APHPM machines fill and seal up to 60 bags per minute and can be used in almost any industry (e.g., food, medical, cosmetics, and fine chemicals). Thus, our innovative machines represent a significant improvement in your packaging process.

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: Alpha 2-4 LD-2, battery voltage: 230 V, Used Martin Christ Alpha 2-4 LD-2 plus freeze dryer with Vacuubrand chemistry pump Ibedjwm Eaiopfx Agyjc Type: Alpha 2-4 LD-2 plus (101542) | Vacuubrand RC 6 Manufacturers: Thermo Fisher Scientific (Martin Christ) | Vacuubrand GMBH Voltage: 230 (50hz) Including documentation and manual

Condition: used, Year of construction: 2008, Delivery Palamides Alpha 700 Plus Iedpfx Ajzi Sucjgyjbc Year: 2008 - Vertical stacker

Condition: used, functionality: unexamined, Ferwood Code: RU0005404 - Manufacturer Code: SP 100-MF1-10 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Iodpfx Ajv Eflwsgyobc

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, controller manufacturer: FANUC, controller model: 310is-WA, number of axes: 5, This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information. Additional equipment • Includes all accessories in the photos • Includes digital documentation Ibedoyali Aspfx Agyjc Machine Benefits Technical Machine Benefits • Internal dimensions of the work tank: 1100 x 800 mm • Wire diameter: 0. 1 mm to 0. 3 mm (0. 25 mm present on the machine) • Wire spool capacity: up to 16 kg • Automatic wire cutting and feeding Extra Information Machine still under power