Used Optimat Tmc 790 for sale (548)

Condition: used, Year of construction: 2023, An as new 2023 and hardly used, XYZ TMC 750 Toolroom VMC with RMX wide screen control, additionally specified with: Advance Features RMX, Tacking including retractable Electronic Handwheels, and DXF Converter - cost in excess of £50,000 + VAT when new! Psdpfxjyh Ixms Akfegk Specification: Working Area 743 x 425 x 489mm Table Size 830 x 410mm Spindle Centre to Column 500mm Spindle to Table 100 - 600mm Column Front to Table Centre 305 - 745mm Rapid Feedrate 20 M/min Cutting Feedrates 1 - 20,000 MM/min Max Table Load 500kg T Slot Size 16mm T Slot Number & Pitch 3 off @100mm Spindle Speeds 5 - 8,000 rpm Spindle Motor 11kW (15hp) Spindle Taper BT40 20 Station Carousel ATC Chip to Chip Tool Change Time 8 secs Max Tool Diameter 100mm Max Tool Weight 7kg Coolant Tank Capacity 125L Ballscrew (Grade C3) 32mm Dia P8 AC Servo Motor Max Torque X = 5 Nm / Y = 5 Nm / Z = 10 Nm Machine Weight 3,500kg Footprint 2,392 x 2,460 x 2,670m Control: ProtoTRAK RMX Spec: X 743 Y 425 Z 489 / 8,000RPM / BT40 Accessories: Advance Features RMX, Tacking including retractable Electronic Handwheels, and DXF Converter

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 70004, functionality: fully functional, Equipment: CE marking, Technical Specifications Dimensions - length: 9.8 m - width: 1.5 m - height: 1.8 m Motor power: 40 kW Equipment - feed speed: 6 - 30 m/min - panel thickness: min. 8 mm, max. 60 mm - panel width (including edge): min. 65 mm (with edge thickness 0.4 - 3 mm) Pgodpfx Ajyzc Igekfok - panel length: min. 150 mm - edge height: min. 14 mm, max. 65 mm - edge thickness: min. 0.4 mm, max. 20 mm

Condition: good (used), functionality: fully functional, power: 104 kW (141.40 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 10 l/h, fuel tank capacity: 230 l, color: blue, overall weight: 13,600 kg, empty load weight: 13,600 kg, maximum load weight: 9,000 kg, lifting power: 9,000 kg/m, lifting height: 6,840 mm, tire size: 445/65 R22.5, tire condition: 90 %, axle configuration: 4x4, mast type: telescopic, Year of construction: 2015, operating hours: 1,192 h, Equipment: UVV, additional headlights, all wheel drive, cabin, === MAIN SPECIFICATIONS === Year of manufacture: 2015 Operating hours: 1,192 h Max. lifting capacity: 9,000 kg Max. lifting height: 6.84 m Drive: Diesel (Stage IV / Tier 4 Final) Transmission: Hydrostatic (2 forward / 2 reverse) Pgjdpfjxb S Umox Akfsk Four-wheel drive: Yes (4x4) Steering modes: 2-wheel / 4-wheel / Crab Stabilisers: No Cabin: Enclosed Heated cabin: Yes Air conditioning: Yes Forks: Yes Tyres: Pneumatic (Aeolus TL AGP23 – 445/65 R22.5) Engine manufacturer: John Deere Power: 104 kW / 141 HP DPF (Diesel Particulate Filter): Yes AdBlue system: Yes Weight: 13,160 kg Max. travel speed: 30 km/h CE certification: Yes === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Excellent condition – well maintained and recently serviced. No technical issues. Clean bodywork and original paint. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price: €69,500 (EXW / excl. VAT). The Manitou MHT 790 is a powerful heavy-duty telehandler designed for handling extremely heavy and bulky loads with ease. With a maximum lifting capacity of 9,000 kg and lifting height of 6.84 m, it ensures reliable performance in construction, mining and industrial environments. Equipped with a Stage IV / Tier 4 Final John Deere engine (141 HP), hydrostatic transmission and three steering modes, it combines strength, manoeuvrability and modern efficiency. === DELIVERY === Crane loading available on request for smooth transport at dispatch. Flexible delivery options tailored to your destination and logistics preferences. All transport handled professionally by the Collé Rental & Sales logistics team.

Condition: excellent (used), functionality: fully functional, power: 105 kW (142.76 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 11 l/h, fuel tank capacity: 165 l, color: blue, overall weight: 13,420 kg, maximum load weight: 9,000 kg, lifting power: 9,000 kg/m, lifting height: 6,800 mm, tire size: 17.5R25, axle configuration: 4x4, number of seats: 1, Year of construction: 2015, operating hours: 2,823 h, Equipment: UVV, additional headlights, all wheel drive, cabin, onboard computer, pallet forks, === MAIN SPECIFICATIONS === Year of manufacture: 2015 Operating hours: 2,823 h Max. lifting capacity: 9,000 kg Max. lifting height: 6.80 m Max. outreach: 3.70 m Drive: Diesel Transmission: Hydrostatic (2 forward / 2 reverse) Four-wheel drive: Yes Steering modes: 2-wheel / 4-wheel / Crab Stabilisers: No Cabin: Enclosed Heated cabin: Yes Fork length: 1,200 mm Tyres: Pneumatic, rough terrain (445/65 R22.5) Engine manufacturer: Yanmar 4TN107FHT-5SMUF Emission class: Stage V / Tier 4 Weight: 13,420 kg CE certification: Yes Pgjdpfjxct Ukjx Akfsk === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history Fully CE-certified and ready for immediate use Hydrostatic transmission for smooth operation Stage V Yanmar engine – powerful and efficient Three steering modes (2WS / 4WS / Crab) for excellent manoeuvrability === CONDITION === Excellent working condition – fully checked, maintained and tested by certified professionals. Inspection possible upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price (excl. VAT): € 75,000 (EXW) The Manitou MHT 790 is a heavy-duty telehandler built for demanding construction and industrial applications. With a lifting capacity of 9 t and height of 6.8 m, it offers strength, stability and precision. Equipped with a Stage V Yanmar diesel engine, hydrostatic drive and 4WD. Fully CE-certified and ready for immediate use from Collé Rental & Sales stock. === DELIVERY === Crane loading available on request for smooth handling at dispatch. Flexible shipping options tailored to your destination and logistics needs. All transport handled professionally by the Collé Rental & Sales logistics team.

Condition: good (used), power: 104 kW (141.40 HP), gearing type: hydrostat, fuel type: diesel, color: blue, lifting height: 6,840 mm, tire size: 445/65 R22.5, axle configuration: 4x4, Year of construction: 2015, operating hours: 2,716 h, Equipment: all wheel drive, Technical information Engine capacity: 4.500 cc Tyre size: 445/65 R22.5 Drive: Wheel Make of engine: John Deere 4045HMC 92 Top speed: 30 km/h Empty weight: 13.160 kg Functional Lifting capacity: 9.000 kg Maximum reach: 372 cm Dimensions of cargo space: 527 x 247 x 247 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Output of the auxiliary hydraulics: 180 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Production country: FR Pgodpfx Akexb S Ugefok Additional information Please contact Sales Department Collé Sittard for more information

Condition: excellent (used), power: 105 kW (142.76 HP), gearing type: hydrostat, fuel type: diesel, color: red, lifting height: 6,800 mm, tire size: 445/65 R22.5, axle configuration: 4x4, Year of construction: 2023, operating hours: 150 h, Equipment: all wheel drive, Technical information Engine capacity: 4.567 cc Pgedpfxexdaums Akfsk Tyre size: 445/65 R22.5 Drive: Wheel Make of engine: 4TN107FHT-5SMUF Top speed: 35 km/h Empty weight: 13.420 kg Functional Lifting capacity: 9.000 kg Maximum reach: 370 cm Dimensions of cargo space: 641 x 247 x 254 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Output of the auxiliary hydraulics: 185 l/min Emission level: Stage V / Tier IV final Delivery terms: EXW Production country: FR Additional information Please contact Sales Department Collé Sittard for more information = Additional options and accessories = - Forks

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit Pgsdpfxsx Ei Syo Akfek - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, total height: 1,800 mm, total length: 10,000 mm, total width: 2,200 mm, Weight: 5.500 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Rough milling unit - └ 6th unit type: Radius scraping unit - └ 7th unit type: Flat scraping unit - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 10000mm x 2200mm x 1800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT Psdpeychw Isfx Akfjgk VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2002, condition: ready for operation (used), General Data Machine weight 4300 kg Podpfx Akex D Inzjfogk Movement X-Axis Movement 3860 mm Z-Axis Movement 185 mm Y-Axis Movement 1793 mm Main Drive Number of axis 3 Spindle Speed 24000 RPM Spindle motor power 17 kW This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: used, machine/vehicle number: 008394, Max. panel width: 3800 mm Pgedpfx Akoygtbtefok Max. panel length: 3800 mm Main saw blade projection: 55 mm No of Grippers: 4

Condition: excellent (used), Optimatic rsmo 090 -tensioning, leveling and back correction for bandsaws. Fully functional. Year of manufacturing 2011 Pgedpfoyym S Tox Akfsk Vollmer Depomatic-System ALIGATOR . Perfect working condition, 1997 , equipped with induction heater for annealing welded teeth

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, OPTIMAT BHX055 Pgedpfx Akeyvh Dpefjk

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece length (max.): 2,500 mm, TECHNICAL DETAILS Panel length min.: 300 mm Panel length max.: 2,500 mm Panel return system for edge banding machine: Left Panel ejection: via air nozzle table The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7877 Pgodpfx Akjyxnapjfok

Condition: new, Year of construction: 2026, We offer subject to prior sales: Hammers, blow bars for Hazemag impact crushers, model HAZ 790, high chrome, each approx. 107 kg, directly available, subject to prior sales. Pgedollvyrspfx Akfjk

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Podpfxjq Ehpae Akfsgk Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 2600 kg Measurements height 2300 mm Dimensions Machine Length 6060 mm Pgodpjx E Eggjfx Akfsk This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. Application Types Edge Banding

Condition: not inspected (used), Type: 09 s mobile DC - BaA, as new, completely overhauled, air conditioning system refurbished with new compressors, hot-swap redundant UPS system, fully welded all-steel container, VdS-certified, raised flooring with cold air ducting, interior and ceiling walls clad with ISO F120 fire protection panels, three separate rooms, designed according to BSI with partitioning between technical and IT rooms, special doors (dimensions: 1,250 x 2,250 mm) with T90 fire protection, four rack systems, connection box with CEE 62 A plug, electrical sub-distribution up to 40 kW fitted with supply and return terminals, UPS system max. output: 20 kVA, high-performance air conditioning unit output: 2 x 4-14 kW, high-end racks (2 units: 600 x 1,000 x 2,000 mm; 2 units: 800 x 1,000 x 2,000 mm) with combined network/server rack systems, total rack units: 140 U, GSM messaging technology, extinguishing system: Novec I 230 fire suppression system, prepared for video surveillance installation, dimensions (L x W x H): 9,125 x 2,438 x 2,896 mm. Further detailed specifications available upon request. Located in Korschenbroich. Loading can be arranged, loading costs to be borne by the buyer. Pgodpsy At Umsfx Akfok

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Pgsdpfeh U Nzpjx Akfsk Glue scrapers manual adjustable Grooving saw Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, cutting width (max.): 560 mm, cutting length (max.): 790 mm, overall weight: 7,000 kg, working width: 560 mm, We offer this refurbished Gietz FSA 790 machine, type: paper cutting machine, year of manufacture: 1989. Manufacturer: Gietz Model: FSA 790 Year of manufacture: 1989 Condition: refurbished Machine type: paper cutting machine If you have any questions or require additional information, please contact us by message or phone. Max sheet size: 790 x 560 mm Temperature control: up to 200° C Max pressure: 150 tons Speed: 5,500 cycles/hour Power consumption: 7.3 kW Heating power: 9.5 kW Weight: 7,000 kg 3x electronic longitudinal foil feed control Works with foil on 1’ cores Capability for both longitudinal and cross foil feed relative to sheet travel 6 heating zones Pedpfeygkxcjx Akfogk 3 transverse drives 3 longitudinal drives 2 die mounting plates – honeycomb type High-speed suction feeder Machine is in excellent condition, fully overhauled. The electrical cabinet has been modernised to current standards and fitted with the latest control system (automatic contactors). Die-cutter mounting frame included.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, total width: 650 mm, total length: 670 mm, total height: 1,490 mm, DGUV certified until: 04/2027, type of input current: three-phase, overall weight: 385 kg, Roll Press Eberhardt Optimat S Portion range: 30 to 90 grams/piece Dough input: 900 to 2800g Roll press with 3 moulding plates Floor-standing machine, 30 divisions Dimensions approx.: 650 x 670 x 1490 mm (W x D x H) Connection: 400 V, 16A-CEE plug Used machine, cleaned Options: Pgedpfoyundlex Akfek Service package E-Box New moulding plates Maintenance contract Feel free to visit us!

Year of construction: 2011, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis HOMAG WEEKE OPTIMAT BHX 500 was manufactured in 2011. It features a robust CNC processing center with a working area of 2500 mm by 1300 mm, main electrospindle power of 6 KW, and a maximum panel thickness of 80 mm. It includes 84 drilling spindles and dual milling spindles, each offering 6 KW at 18000 rpm. If you are looking to get high-quality CNC capabilities, consider the HOMAG WEEKE OPTIMAT BHX 500 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining Pgsdpfsx D Nvgjx Akfjk

Condition: used, Year of construction: 2020, Overview This RINK automatic screw cap remover (unscrewer) was manufactured in 2020 and is designed for the automatic removal of screw caps from returnable glass bottles before the containers enter the bottle washing process. The machine was installed in a high-capacity returnable glass bottling line with a capacity of approximately 2,000 crates per hour. Systems of this type are typically positioned upstream of the bottle washer to ensure that bottles enter the cleaning process without closures. The machine is configured for 0.75 L GDB bottles in 12-bottle crates and includes format equipment for different crate variants. The system operates with cross-flow crate transport and a crate infeed direction from left to right. The installation includes a cap discharge system and blower unit for removing closures from the bottles. The machine was built with modern electrical components and is supplied with technical documentation. Technical Data Manufacturer: RINK Machine type: Automatic screw cap remover (unscrewer) Model: KM 790 / 4K-3K QL Year of manufacture: 2020 Capacity: approx. 2,000 crates per hour Application: Automatic removal of screw caps from returnable bottles before bottle washing Bottle format: 0.75 L GDB bottle (height approx. 295 mm) Crate formats: 12-bottle Pool N2 crate (400 × 266 × 333 mm) 12-bottle individual crate (395 × 295 × 355 mm) Crate transport: Cross-flow crate transport Infeed direction: left → right Transport height: approx. 700 mm (max. 750 mm adjustable) Dimensions: Length: 2,700 mm Width: 1,400 mm Height: 2,950 mm Weight: approx. 3,000 kg Electrical equipment: Danfoss frequency converter Standard electrical configuration Additional equipment: Cap transport system Blower unit Technical documentation available Condition: Used Availability: On request Podoytphcspfx Akfjgk

Condition: ready for operation (used), Year of construction: 2006, Edgebander manufactured in 2006. This HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, accommodating workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It includes a single-sided edge banding machine capable of processing various edge materials up to 20 mm thickness. If you are looking to get high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edgebander we have for sale. Contact us for further details. • Line workpiece capacity: • Length 250–3000 mm • Width 120–1200 mm • Thickness 8–60 mm • Edge bander (KAL 330) — base and transport • Continuous machine base; workpiece support with roller bar extendable ~800 mm • Transport chain 80 mm wide with rubber surface; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18–25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece overhang/supernatant 30 mm • Workpiece thickness 12–60 mm • Edge material from strip: 0.4–20 mm (max cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max cross-section: PVC 135 mm², veneer 100 mm²) • Max coil diameter 830 mm • Pneumatic connection 7–8 bar • Infeed system and controls (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic infeed (lengthwise and crosswise); for precisely sized, square parts • Stepless infeed guidance adjustment (axis), speed set at input terminal • Automatic side adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Input terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granule storage • Quick-lock system for QA/QE application unit; QA front glue storage for color change • Basic gluing unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Trimming unit HL84 with standing trimming stop for sensitive edges • Pneumatic trimming motor adjustment (2 positions: flush/level and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side trimming stop adjustment when edge thickness changes • Rough milling unit: 2 motors stacked, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: roughing with ~0.2 mm overhang / without overhang • Reserved free space for a fine milling unit • Contour milling unit Servo FK13 automatic: • 2 motors each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-fold tool changer Psdpfx Ajytf Irjkfogk • Feed speed max 20 m/min; minimum spacing between workpieces 500 mm • Workpiece thickness 12–60 mm • Automatic FK adjustment for identical radii on different edge thicknesses; auto retract • FK workpiece guidance with additional clamping for min part length 120 mm (single-sided) • Finishing and cleaning • Multi cleaning unit MN21 automatic: • Up to 3 profiles; tracing from top/bottom/side for chamfer and rounding on pre-milled PVC edges • Electropneumatic air nozzles; automatic chamfer/radius changeover; auto retract of upper/lower tool • Height adjustment via top pressure • PVC shavings separator top/bottom

Condition: excellent (used), Year of construction: 2011, used CNC machining center Nesting machine Manufacturer: Weeke Model: Optimat BHP 210 Year of manufacture: 2011 4-axis nesting machine O-TRIX work table 3700 x 2200 mm Vacuum pump 3 x 300m³/h with frame X-axis working area: 3700 mm Y-axis working area: 2100 mm Z-axis working area: 100 mm 25 vertical drilling spindles Milling spindle 12 kW up to 24,000 rpm with C-axis, 360° interpolation, liquid circulation cooling Air blast nozzle at milling tool, integrated in extraction hood – 14-fold tool changer, rear-mounted Lifting table for the system 3700 x 2100 mm, load capacity 3500 kg Stacking height 480 mm Pgjdeymzfgjpfx Akfjk Intermediate handling table Vacuum arm for raw panel positioning, infeed bracket Ejector, conveyor belt 4000 x 2100 mm POWERCONTROL PC 85 control with 17″ TFT WoodWop 6.0 incl. MDE and production list software Woodnest Complete and Woodnest Professional Delivery includes only illustrated tools and HSK holders!

Condition: excellent (used), Brandt Optimat KDN340 Edge Bander Glue application by roller Tank features exchangeable system (machine is supplied with only one tank) Pneumatic pre-cut guillotine Pressure rollers End-trimming saws Top/bottom milling unit R1-R2 Profile scraper Polishing unit Max. workpiece height: 45mm Podpfx Asywwqzskfegk Max. edge thickness (in roll): 3mm Feed speed: 10m/min Machine length: 310cm The machine is well-maintained and in very good condition.