Used Pgcnc 1325 Special for sale (9,247)

Condition: used, mileage: 300 km, power: 335 kW (455.47 HP), first registration: 02/2025, fuel type: diesel, axle configuration: 3 axles, gearing type: automatic, suspension: air, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, parking heater, Special equipment L ProCabin | StreamSpace, flat floor | Axle load - measuring device | Airbag, driver's side | Trailer socket 12V / 13-pole | Audio system: digital radio DAB / DAB+ | Interactive cockpit multimedia system | Navigation system | Driver assistance system: distance control | Sunroof, electric | Fuel tank: 390 liters, aluminum, left | Engine brake, reinforced | Trailing axle 7.5 t, steered, with load reduction | Auxiliary drive MB 131-2c | Wheelbase variant 5200 mm | Frame overhang 2550 mm | Rain sensor | Tire pressure monitoring system | Reversing warning, acoustic (warning signal outside) | Seats in the cab: driver's seat, suspension seat, comfort | Sun visor, exterior | Tires 295/60 R 22.5, rear axle | Tires 355/50 R 22.5, front axle/front lift axle/rear lift axle | Vehicle production site: Wörth | Heavy-duty series, new generation from 18 tons | Reversing camera | Comfort bed, lower | Platform length approx. 8,100mm, body width 2,550mm, loading edge approx. 1,040mm, loaded | Payload depending on the truck version: 13.6 tons at a gross vehicle weight of 26 tons | Body height 120mm | Weight of the complete body approx. 3,850 kg | Fine-grained steel, non-slip surface | 40 lashing points | Ramps | Ramp length 4,800mm, width 750mm, approx. 7° approach angle | Ramps divided with hydraulic lateral displacement | Completely retractable with hydraulic extension of the overall ramp | Mechanical telescopic pivot supports | Hydraulic support at the end of the body | Hydraulic winch, type ComeUp HV 15000 for 6,800 kg pulling force, 27m wire rope, remote control | Sale exclusively to commercial businesses, with exclusion of all warranties. Subject to errors and prior sale. Tedpfx Afjzw D Uds Asc

Condition: used, mileage: 24,691 km, power: 177 kW (240.65 HP), first registration: 04/1994, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 1994, Equipment: ABS, all wheel drive, compressor, parking heater, Mercedes-Benz 1124AF 4x4 all-wheel drive fire engine LF16/12 according to DIN 14530, 177 kW/240 hp with 9 seats and auxiliary heating First registered: 04/1994 Mileage: 24,691 km ----* 6-cylinder OM 366 LA engine with 240 hp. * 6-speed manual transmission with low gear ratio * 2x differential locks (longitudinal and transverse) * ABS (deactivated via push button) * Warm air auxiliary heating Todewawdgjpfx Af Ajc * 90 km/h according to the documents * Compressed air connection for external filling of the brake system * Crew cabin with 9 seats, all with seat belts, including 2 emergency seats * Unladen weight: 7,610 kg. * Gross vehicle weight: 12,000 kg. * Small tow bar with 2000 kg towing capacity * Rotating beacons * Searchlights * 9R22.5 tires in good condition * Wheelbase: 3640 mm * Overall vehicle length: 7300 mm * LF 16/12 fire engine with mast body * 1270-liter fire water tank * Rosenbauer FP 16/8 centrifugal fire pump * Storage for generator in body * 1 spare wheel * Roof storage compartments for ladders and hoses ----TÜV valid until 11/2025 Good technical and visual condition, ready to drive and use immediately! Full service history! Perfect off-road base vehicle for a robust camper/expedition vehicle or other all-wheel drive vehicle applications. Subject to errors and changes!

Condition: used, mileage: 2,314 km, power: 118 kW (160.44 HP), first registration: 04/2025, fuel type: diesel, overall weight: 10,400 kg, next inspection (TÜV): 04/2027, gearing type: automatic, emission class: euro6, Equipment: air conditioning, navigation system, 50 km/h version: suspended and soundproofed driver's cab, air-suspended driver's seat, steering column adjustable in height and angle, window in the cab floor, 7" color display with multifunction indicator, reversing and suction mouth camera, 2x LED reversing lights. 80 km/h version, CD radio with Bluetooth and including TomTom navigation, pulled suction mouth in front of the front axle 400mm adjustable with the side brushes left and right, 3rd front brush, stainless steel container with integrated suction fan 4.3m³, high-pressure water system with lance, 4.8m suction hose on the sweepings container that can be rotated 360°. Fresh water tank 880l, sweepings container 930mm tipping height. Tedpewcikksfx Af Aoc

Condition: used, mileage: 93,506 km, power: 118 kW (160.44 HP), first registration: 08/2017, fuel type: diesel, empty load weight: 6,150 kg, maximum load weight: 5,000 kg, overall weight: 11,150 kg, fuel: diesel, color: orange, driver cabin: other, gearing type: other, emission class: euro6, suspension: other, number of seats: 2, total length: 4,600 mm, Year of construction: 2017, operating hours: 8,656 h, construction height: 2,700 mm, Equipment: air conditioning, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: Tjdpfjz E S Sdex Af Asc You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: new, Year of construction: 2026, laser type: fiber laser, laser power: 3,000 W, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. Innovative fibre laser technology allows much faster, more efficient and cheaper cutting of sheet metal parts compared to CO2 lasers. The cutters are characterised by high speeds, productivity and exceptional cutting accuracy. They provide unrivalled precision and repeatability. Our fibre lasers are primarily designed for processing materials such as: - Independent metals - Aluminium - Stainless steel - Carbon steel SOURCE POWER 3000W CONSTRUCTION The frame of our laser is designed and manufactured from scratch in our factory. The high-quality steel used for the machines is cut, then welded and precision-machined. The entire frame, gantry and gate arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES High-resolution, high-power Schneider AC servo system motors (Y1Y2 x 2000W, x 1500w, z 400W) have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. Drive transmission is via high-performance planetary gears. The X and Y axes use the classic and proven helical slats, which ensure long life and precision. HEAD A liquid-cooled, WSX head is used for cutting sheet metal. A high-performance quartz glass lens focuses the diffused laser beam on the material to be cut, ensuring high cutting accuracy. For the process to proceed correctly, the HSU system adjusts the head height taking into account material irregularities. A safety window located between the nozzle and the lens protects the lens unit from splinters of molten metal. Tedsx Tn S Iopfx Af Asc LASER SOURCE The laser uses a Raycus Laser light source with high electro-optical conversion efficiency, low power consumption and high beam quality. In addition, it allows faster and more efficient operation and contributes to the elimination of operator errors. In addition, the source is resistant to backscattering, i.e. the beam returning to the laser. Good power stability ensures efficient working while consuming low energy. COOLING The S&A CWFL industrial dual-temperature units are specially designed for cooling fibre lasers. They have multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm and high/low temperature alarm. INTERCHANGEABLE WORKTABLE The interchangeable work table located at the rear of the machine reduces laser downtime to a maximum. Automatic table replacement takes just 10 seconds. This gives the operator time to take the cut parts from the table and load a new sheet while the laser is working on the other table. This system ensures a very high production flow. AUTOMATIC LUBRICATION SYSTEM To keep the machine in good condition - the gears and guides need to be lubricated with oil at most every few days. An automatic system starts the lubrication every specified time and in the correct amount, and all parameters are set in the software.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Tsdpfx Afjx A Nnte Aoc Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: new, color: brown, driver cabin: other, gearing type: other, Vehicle location: Bovenden. Body: 16-ton demountable system, for 3-axle trucks (new stock). ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Tjdpfx Afjz E Szre Asc

Condition: new, Year of construction: 2026, laser type: fiber laser, laser power: 6,000 W, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. Innovative fibre laser technology allows much faster, more efficient and cheaper cutting of sheet metal parts compared to CO2 lasers. The cutters are characterised by high speeds, productivity and exceptional cutting accuracy. They provide unrivalled precision and repeatability. Our fibre lasers are primarily designed for processing materials such as: - Independent metals - Aluminium - Stainless steel - Carbon steel SOURCE POWER 6000W CONSTRUCTION Todpfx Aox Tn U Ajf Aoc The frame of our laser is designed and manufactured from scratch in our factory. The high-quality steel used for the machines is cut, then welded and precision-machined. The entire frame, gantry and gate arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES High-resolution, high-power Schneider AC servo system motors (Y1Y2 x 2000W, x 1500w, z 400W) have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. Drive transmission is via high-performance planetary gears. The X and Y axes use the classic and proven helical slats, which ensure long life and precision. HEAD A liquid-cooled, WSX head is used for cutting sheet metal. A high-performance quartz glass lens focuses the diffused laser beam on the material to be cut, ensuring high cutting accuracy. For the process to proceed correctly, the HSU system adjusts the head height taking into account material irregularities. A safety window located between the nozzle and the lens protects the lens unit from splinters of molten metal. LASER SOURCE The laser uses a Raycus Laser light source with high electro-optical conversion efficiency, low power consumption and high beam quality. In addition, it allows faster and more efficient operation and contributes to the elimination of operator errors. In addition, the source is resistant to backscattering, i.e. the beam returning to the laser. Good power stability ensures efficient working while consuming low energy. COOLING The S&A CWFL industrial dual-temperature units are specially designed for cooling fibre lasers. They have multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm and high/low temperature alarm. INTERCHANGEABLE WORKTABLE The interchangeable work table located at the rear of the machine reduces laser downtime to a maximum. Automatic table replacement takes just 10 seconds. This gives the operator time to take the cut parts from the table and load a new sheet while the laser is working on the other table. This system ensures a very high production flow. AUTOMATIC LUBRICATION SYSTEM To keep the machine in good condition - the gears and guides need to be lubricated with oil at most every few days. An automatic system starts the lubrication every specified time and in the correct amount, and all parameters are set in the software.

Condition: excellent (used), mileage: 96,939 km, first registration: 12/2006, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: automatic, suspension: steel, total length: 6,900 mm, total width: 2,350 mm, total height: 3,120 mm, loading space volume: 2 m³, Year of construction: 2006, = Additional options and accessories = - PTO (Power Take-Off) = Notes = Tedpfjxf I D Sox Af Aec WATER TANK 2000L = Further information = Cab: double Suspension: leaf spring Front axle: steered Rear axle: twin tires Gross vehicle weight: 13,000 kg Technical condition: very good Visual condition: very good Contact Thierry Leemans for more information.

Condition: new, Year of construction: 2026, 2030 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Tjdpfx Afjin Eqfe Aoc Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist

Condition: used, mileage: 5,32,390 km, power: 353 kW (479.95 HP), first registration: 01/2023, fuel type: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2023, Check this out: Daf XF 480 FT ✨ Key included features: USB, Bluetooth, Android Auto, Apple CarPlay, display, radio, air conditioning, navigation system, multi-function steering wheel, airbags, electric windows, battery disconnect switch. Vehicle Reference Code: 51329 💰 Net price: €50,000 (excluding VAT and registration tax) ♻️ We offer a favorable trade-in value for your used vehicle. Tsdpfxjz H Ug Hj Af Asc 📅 Offer valid while supplies last. 📍 Come and see the vehicle at our Mercedes-Benz Merbag dealership in Lainate, located at Via Scarlatti, 1. For information and appointments: Vehicle Reference Code: 51329

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, total length: 8,228 mm, total width: 3,077 mm, total height: 3,375 mm, Year of construction: 2026, Equipment: air conditioning, crane, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane Todpfjzydk Rox Af Asc ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: used, mileage: 11,585 km, power: 118 kW (160.44 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 6,050 kg, maximum load weight: 5,350 kg, overall weight: 11,400 kg, next inspection (TÜV): 10/2026, fuel: diesel, color: orange, driver cabin: other, gearing type: other, emission class: euro6, suspension: other, number of seats: 2, total length: 4,600 mm, Year of construction: 2016, operating hours: 11,585 h, construction height: 2,700 mm, Equipment: ABS, air conditioning, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Tsdpez D Ncqsfx Af Ajc Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: new, Year of construction: 2026, This is a state-of-the-art CNC machine dedicated to the industrial sector, used for cutting sheets and profiles, using a plasma torch. The machine is characterised, among other things, by a robust structure made of the highest quality steel and aluminium, a large cutting range, the possibility of cutting workpieces of any shape and low process costs. The high-end solutions used in production ensure reliable and safe operation. The cutting of the material is carried out in a short time, while maintaining the precision of the workpiece. In order to obtain the desired shape, it is only necessary to import the file into the software, so operation of this cutting machine is easy and intuitive. Our plasma cutting machines are primarily designed to process materials such as: Todpfx Ajur R Erjf Ajc - Black steel, - Stainless steel, CONSTRUCTION The frame of the plasma cutting machine is designed and manufactured from scratch in our factory. The high quality steel used for the machines is cut, then welded and machined. The entire frame, gantry and gantry arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES Servo AC motors with high resolution and power have been used to drive our cutters, ensuring adequate acceleration and speed in each direction. These are highly dynamic and precise motors with feedback, guaranteeing zero defect by continuously controlling the operating parameters. The X and Y axes use classic and well-proven helical bars, which ensure long life and precision. FUEL Our plasma machines use components from the leading manufacturer PGCNC. The technologies used in the torch significantly increase productivity and cutting speed. HD technology provides better hole quality, increased piercing capacity and bevelling capabilities. This ensures high quality, repeatable cuts and maximises productivity with minimal running costs and reliability. KNIFE TABLE The knife table is made with technology that is resistant to working at elevated temperatures. This allows us to work continuously without worrying about the occurrence of burn-outs that prevent the material from being evenly positioned on the work table. The positioning of the scissors can be easily changed according to the size of the workpieces to be burnt. The knife table is an excellent solution for cutting thicker materials. SOFTWARE The machine is equipped with Starfire 2D CAD/CAM software. Various functions are available to the user, including the ability to import finished designs in vector formats: .dxf, .plt, .ai, .eps. The programme ensures fast and precise development of cutting paths. PLASMA SOURCE The basic plasma equipment includes the 120A cutting system, which is characterized by high productivity and cutting quality and speed. AUTOMATIC LUBRICATION SYSTEM Plasma cutting machine equipment also includes an automatic lubrication system that minimizes machine maintenance. The central lubrication system is a simple and functional device used to supply grease to the places where machine and equipment components come into contact. - POWER 400V 50Hz - MAX SPEED 45 m/min - DOOR SHAPE 200-600 mm - TYPE OF WORKING TABLE Knife table - WORKING TABLE WEIGHT 500 kg/m2

Condition: used, functionality: fully functional, machine/vehicle number: W09507250AOK51648, first registration: 06/2010, fuel type: diesel, color: orange, driver cabin: day cab, number of seats: 2, Year of construction: 2010, operating hours: 4,890 h, Equipment: car registration, Vehicle • Model: BOKI HY 1251 Municipal Vehicle • Manufacturer’s No.: W09507250AOK51648 • Engine: IVECO Type F1C • Without tipper body Chassis & Drive • Extended wheelbase from 2,000 mm to 2,300 mm • All-wheel drive • Increased top speed to 50 km/h (instead of 40 km/h) • Performance Package III • Hydraulic Package II • Tires: 225/75 R16 • Increased permissible total weight to 5,000 kg Cab • Air-suspended Grammer comfort seat for the driver • Protective cover for driver and passenger seat • Sun visor for passenger • Interior mirror • Ventilation flap (550 × 260 mm) • Cyclone separator Other Equipment • Towing hook for maneuvering at walking speed • BOKI swivel container system, Type 130T (1,300 mm wide) • Hydraulic swiveling • Two different chain lengths for various containers Included NEW demountable tipper body • Capacity approx. 1.3 m³ • Open, symmetrical design for Multicar system • Completely welded • Floor: 4 mm • Side walls: 3 mm • Height: 770 mm Optionally available: Transport pallet ASK MC PALETTE 1800 • Dimensions: 1,800 × 1,100 mm • Manufactured according to DIN 30735 • With DGUV inspection sticker • Completely welded • Floor 4 mm with reinforcements • Primed and 2-coat painted in desired RAL color • Price: €1,950 plus VAT Tedpfx Afozf Eawe Ajc Subject to changes, typographical errors, errors and prior sale. All information is provided without warranty. The sale is made excluding any guarantee or warranty.

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Available Immediately MAN TGS 35.510 – EURO 6, TipMatic – Automatic Transmission 8x2 Three steered axles Steerable/lift axle Front stabilizer approx. 14,000 kg Flatbed body with drop sides 6200x2550x600 mm Entry steps Checker plate floor Removable drop sides 9 x LED lights Retractable over-width markers extendable to 3500 mm wide Start/Stop Warning beacons 8 x stake pockets 6 x lashing eyes, 6500 daN Toolboxes Tsdpewuhxwofx Af Asc Trailer coupling (AHK) Storage compartments Storage boxes 20-foot container locking system Perforated side profile with lashing eyes, 2500 daN Crane: FASSI 710 RA 2.26 with fully hydraulic 4-point stabilizers, 6 hydraulic extensions on main boom, Fly-Jib L426 with 6 hydraulic extensions, wire rope winch, cross remote control, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory set for winch operation, foldable roller, quick coupling between main boom and fly jib, and more…

Condition: used, fuel type: gasoline, empty load weight: 8 kg, color: grey-black, gearing type: mechanical, Year of construction: 2025, TITLE: NEW 5-TINE GRAPPLE FOR SCRAP AND BULK MATERIAL HANDLING WITH INTEGRATED ROTATOR REF.: 25-ATT-06 YEAR: 2025 MODEL: PM 5 200R SERIAL NO.: 022525 WEIGHT: 420 kg Tedpsxzlzmsfx Af Ajc CAPACITY: 2500 kg VOLUME: 210 l Subject to errors and/or omissions The listed prices do not include VAT. Please contact our sales department for up-to-date price and condition information. For further information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA Operates in the sale and purchase of industrial and commercial vehicles, with a primary focus on the waste management sector. Specialists in trucks, trailers, and hooklift equipment. We have a fleet ready for immediate delivery comprising over 50 trucks and more than 150 containers, hooklift bins with and without cranes. E&OE Due to the quantity of ads and information listed, Aurora recommends verifying the accuracy of all details with our sales staff.

Condition: used, mileage: 85,528 km, power: 206 kW (280.08 HP), first registration: 12/2004, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro3, total width: 2,500 mm, total height: 3,290 mm, Year of construction: 2004, Equipment: ABS, compressor, MAN LE 15.280 with METZ DLK 23-12 PLC 3.2 L32 aerial ladder, in immediately operational condition. ----Equipment of the base vehicle: * Suspension type: leaf spring/leaf spring * Wheelbase: 4575 mm * Permissible gross weight: 15 tons * Automatic transmission ZF 5 HP 590 with retarder * Fuel tank: 125 liters, right side * Adjustable steering wheel * Axle ratio i = 4.62 * Differential lock in rear axle * Cab: medium length * Driver's comfort seat with lumbar support - manufacturer: GRAMMER * Passenger seat - manufacturer: GRAMMER * Exhaust pipe for fire department * Quick start system * Anti-lock braking system (ABS) * Traction control system * Disc brake for front axle Tsdpfxjxa Sbqj Af Aec * Armrests on both doors * Additional long-range and fog lights * Hour meter * Cruise control * Radio MAN CD 24V * Stabilizers for front and rear axle * Headrests for driver and passenger * Cab rear wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirrors * Wide-angle mirrors, left and right, heated * Curb mirror, right, heated and electrically adjustable * Electric windows, left and right * 4-wheel parking brake * Snow chains on the rear axle * Winter tires Equipment of the aerial ladder superstructure: * Superstructure: Metz aerial ladder DLK 23-12 L32 CAN with rescue platform (rescue height approx. 30.75m) Max. outrigger angle: 75 degrees, max. platform load capacity: 270kg, nominal rescue height: 23m, nominal outreach: 12m, outriggers: horizontal-vertical, variable outrigger width between 2,400mm and 4,500mm * Special signal system * Front flashing light * Siren * Stretcher storage for accommodating a DIN stretcher, including conversion for accommodating a rescue sled, load capacity up to 150 kg * Permanently installed 230V power supply to the rescue platform, 2 Schuko sockets in the rescue platform * Permanently installed water supply line in the upper part of the ladder with slide valve and B-Storz couplings * 3 anchor points in the rescue platform for securing the platform crew * Load eye on the lower ladder, loadable with up to 4,000 kg * Load eye on the boom segment (between ladder tip and rescue platform) for attaching a lowering device, 270kg/400kg payload * LED ambient lighting on the undercarriage * XXL platform on the turntable for accommodating a DIN generator, ventilation unit, traffic cones, etc. * 2 adjustable spotlights at the end of the lower ladder, operable from the main control panel * Complete service history available, all maintenance performed annually. Upon request and for an additional charge, a new 20-year service including hose replacement and inspection is possible! ----Immediately operational vehicle in well-maintained condition, both inside and out! Non-smoking vehicle! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also Whatsapp Email: Subject to changes, prior sale and errors!

Condition: used, mileage: 8,77,144 km, power: 151 kW (205.30 HP), first registration: 12/2007, fuel type: diesel, maximum load weight: 3,490 kg, overall weight: 10,300 kg, emission class: euro4, INTERNAL DIMENSIONS OF THE CARGO COMPARTMENT: LENGTH = 6.48 m // WIDTH = 2.50 m // HEIGHT = 2.68 m For further information Tjdpfx Afoxb Ewhj Asc

Condition: used, mileage: 6,01,730 km, power: 157 kW (213.46 HP), first registration: 10/1989, fuel type: diesel, empty load weight: 12,320 kg, maximum load weight: 5,280 kg, overall weight: 17,600 kg, axle configuration: 4x2, wheelbase: 6,000 mm, brakes: other, color: blue, driver cabin: other, gearing type: automatic, emission class: none, number of seats: 2, Equipment: ABS, bathroom, cabin, parking heater, power assisted steering, seat heater, * German vehicle * Ideal basis for conversion into a sales or trade fair bus * Suitable for all sales purposes, e.g. food, tools, clothing, etc. * Shelving systems on the right and left * Various shelves, counters and drawers * Interior lighting throughout * The vehicle is fully insulated and equipped with 6 insulated roof windows * Furthermore, a diesel auxiliary heater with 60 liter additional tank is installed * Toilet room with WC and washbasin available * Large fresh water tank and waste water tank * Electric water pump * 220-280 volt electrical converter * Power sockets * Flat floor * 2 x bench seat * ISRI driver's comfort seat with air suspension * Seat heating * Sunblind for windshield * 6 x roof windows with sunblind * Loudspeaker system with microphone * Low beam headlights * Heated mirrors * ABS, ASR * Mercedes-Benz 6 cylinder in-line engine OM 447h * Max. gross vehicle weight: 17,600 kg * Unladen weight: 12,320 kg * When selling to tradesmen and for export (non-EU and EU), the German commercial regulations apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Tjdpfx Afsvhpw Ns Aoc Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, Year of construction: 2026, laser type: fiber laser, laser power: 6,000 W, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. Innovative fibre laser technology allows much faster, more efficient and cheaper cutting of sheet metal parts compared to CO2 lasers. The cutters are characterised by high speeds, productivity and exceptional cutting accuracy. They provide unrivalled precision and repeatability. Our fibre lasers are primarily designed for processing materials such as: - Independent metals - Aluminium - Stainless steel - Carbon steel SOURCE POWER 6000W CONSTRUCTION The frame of our laser is designed and manufactured from scratch in our factory. The high-quality steel used for the machines is cut, then welded and precision-machined. The entire frame, gantry and gate arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES High-resolution, high-power Schneider AC servo system motors (Y1Y2 x 2000W, x 1500w, z 400W) have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. Drive transmission is via high-performance planetary gears. The X and Y axes use the classic and proven helical slats, which ensure long life and precision. HEAD A liquid-cooled, WSX head is used for cutting sheet metal. A high-performance quartz glass lens focuses the diffused laser beam on the material to be cut, ensuring high cutting accuracy. For the process to proceed correctly, the HSU system adjusts the head height taking into account material irregularities. A safety window located between the nozzle and the lens protects the lens unit from splinters of molten metal. LASER SOURCE The laser uses a Raycus Laser light source with high electro-optical conversion efficiency, low power consumption and high beam quality. In addition, it allows faster and more efficient operation and contributes to the elimination of operator errors. In addition, the source is resistant to backscattering, i.e. the beam returning to the laser. Good power stability ensures efficient working while consuming low energy. COOLING The S&A CWFL industrial dual-temperature units are specially designed for cooling fibre lasers. They have multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm and high/low temperature alarm. Tedsx Tphwspfx Af Aoc INTERCHANGEABLE WORKTABLE The interchangeable work table located at the rear of the machine reduces laser downtime to a maximum. Automatic table replacement takes just 10 seconds. This gives the operator time to take the cut parts from the table and load a new sheet while the laser is working on the other table. This system ensures a very high production flow. AUTOMATIC LUBRICATION SYSTEM To keep the machine in good condition - the gears and guides need to be lubricated with oil at most every few days. An automatic system starts the lubrication every specified time and in the correct amount, and all parameters are set in the software.

Condition: new, Year of construction: 2026, 1520 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Tjdpfoin Eztjx Af Asc Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 2040 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 4100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist Todjin Uiljpfx Af Aoc - any size of the working table

Condition: used, first registration: 12/2014, empty load weight: 3,850 kg, maximum load weight: 14,150 kg, overall weight: 18,000 kg, tire size: 255/60 19,5, tire condition: 30 %, axle configuration: 2 axles, color: black, driver cabin: day cab, emission class: none, suspension: air, Year of construction: 2014, front tire size: 255/60 19,5, rear tire size: 255/60 19,5, Equipment: ABS, truck registration, Vehicle number for inquiries: 41780 Krone, ZZW 18 * Year of manufacture: 2014 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Jumbo Tandem Trailer * 7.15 * 7.45 * 7.82 * Air coupling, Duomatik type * 15-pin connector * Lifting and lowering device * Rear supports * Other * Suspension: Air * Gross vehicle weight: 18,000 kg * Tare weight: 3,850 kg * Payload: 14,150 kg Tsdpfx Afozz Hbus Asc * Permissible gross vehicle weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 20%|20% -- 20%|20% - Tire size: 255/60 R19.5 * Tire condition 2nd axle: 30%|30% -- 30%|30% - Tire size: 255/60 R19.5 * Tire sizes: 255/60 R19.5 * Parking height: 980 mm * Lifting range: 850 mm to 1400 mm * Height-adjustable twist locks Disclaimer: Subject to changes, prior sale, and errors excepted. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Quick and easy financing options * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration services * Transfer of commercial vehicles Please ask our trained specialists; we will gladly advise you.

Condition: new, Year of construction: 2026, functionality: fully functional, Pros: • comprehensive processing (cutting, drilling, milling, engraving) • stable structure guaranteeing maximum precision and reliability Tsdpfx Aour N A Nsf Aec • table with a vacuum system • free access to the machine enabling operation by one operator • the possibility of placing the entire palette of plates on the tray CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 150 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table