Used Pinacho Smart Turn 6/225 for sale (56,148)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table Bjdpfx Afeuxfu Nj Aeln - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: like new (used), Year of construction: 2020, operating hours: 400 h, functionality: fully functional, from company closure as good as new Pinacho STS18-180 lathe with Fagor control and revolver Year of construction 2020 Turning hours 400 Turning diameter above bed 360 mm Blsdpfx Afowdhn Re Aon Turning diameter above slide 190 mm Center length 1000 mm Turning length 840 mm Spindel through 42 mm Weight 2500 kg equipped with 3-jaw chuck, 8-fold revolver, Fagor control price excluding VAT, loaded on truck

Condition: like new (used), Year of construction: 2023, Inotec I225-iT5-160D Emulsifier Bledezwkv Uopfx Af Aon INOTEC emulsifiers are used for the production of fine minces in the meat industry and for the production of fine emulsions of meat, vegetables, and fruits for baby food and hospital food, for confectionery, for the production of processed and analogue cheese products, and for pet food. Manufacturer: Inotec Model: I225-iT5-160D Year: 2023 Capacity: 15,000 kg/hour (depending on the product) Hole plate diameter: 225 mm Power: 400V / 50Hz / 180kW Machine dimensions (LxWxH): 2,000 x 1,300 x 1,800 mm Machine weight: 2,000 kg. Inotec IFP 15 Product Pump Manufacturer: Inotec Model: IFP 15 Year: 2018 Power: 400V / 50Hz / 20kW Machine dimensions (LxWxH): 3,000 x 1,900 x 1,620 mm Machine weight: 2,000 kg.

Condition: new, Year of construction: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc Option) CNC turning/milling center with tailstock, driven tools and true Y-axis, ±70 mm, 35° slant bed and linear roller guides Available for viewing in the showroom Max. swing diameter: 600 mm Max. turning diameter: 320 mm Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 stations BMT55, all 12 with live tooling Max. rotational speed: 4000 rpm, 3 kW Spindle Chuck diameter: 203 mm (optional 254 mm) Spindle nose: A2-6 (optional A2-8) Max. bar capacity: 52 mm (options for 65, 75, and 91 mm) Spindle bore diameter: 66 mm Drive power, direct drive: 22/30 kW Max. spindle speed: 4,000 rpm Tailstock diameter: 110 mm / MK3 Tailstock traverse: 850 mm Dimensions (W x D x H): 3.6 x 2.1 x 2.3 m Weight: 5.5 t Standard accessories: Coolant system Three-color warning light Work area lighting Central lubrication Blodpfx Asqa Dtfof Ajn Programmable tailstock Set of soft jaws Tools and toolbox CE conformity Operating manual Including special accessories: Hinged belt chip conveyor Tool measuring arm Oil skimmer Bar loader interface Video shows DT500

Condition: good (used), Year of construction: 2011, operating hours: 4,700 h, functionality: fully functional, machine/vehicle number: S6CZ1151, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 29,000 W, bar passage: 65 mm, Equipment: bar feeder, documentation/manual, Year: 2011 Operating hours: 4,700 h (increasing) Turning diameter: 65 mm Blodpexwp I Ajfx Af Ajn CNC type: Fanuc 18i-TB Number of turrets: 1 Axes: X, Y, Z, and C Number of turret stations: 12 Number of driven stations: 12 Main spindle and sub-spindle speed: 5,000 rpm Main and sub-spindle motor power: 29 kW Dimensions (L × W × H): 3,302.0 × 2,057.4 × 2,032.0 mm Weight: 5,700 kg Chip conveyor IEMCA MASTER 880r Verso bar feeder (3 m bar + loading magazine) Numerous fixed and driven tool holders included in the sale: _Axial driven tool holder: 3 _Radial driven tool holder: 4 _Swivel driven tool holder 0–90°: 2 _Fixed turning tool holder: 5 _Fixed drilling tool holder: 7 _Cut-off blade holder: 1 2 sets of chucks for jaw passage (main spindle and sub-spindle). The machine is currently in use but can be made available within 4 weeks. The machine is to be collected on site (Saint Pierre en Faucigny). Loading and transport costs are at the buyer’s expense.

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar Blsdpfx Aevvtpxjf Aon electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Longitudinal travel, X-axis (mm) 600 Grinding width (mm) 400 Max. grinding height (mm) 500 Clamping area (mm) 600 x 400 Grinding wheel (mm) 300 x 50 Power of grinding spindle motor (kW) 5.5 Manufacturer ELB Year of manufacture 2012 Control system ELB Comfort Type of control system CNC Total power requirement (kW) 23 kW Space requirement (mm) approx. 2,800 x 2,400 x 2,500 mm Weight (kg) approx. 4,000 kg Condition Good Blodpfx Afjzzll Sj Aen

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 620 mm, turning length: 1,500 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 15 W, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 3,325 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,915 kg, Equipment: documentation/manual, rotational speed infinitely variable, Tonio CNC Pinacho ST310 110x1500 with Fagor 8055T, featuring automatic learning capabilities. a. Fagor 8055T control unit b. Distance between centers: 1500 mm c. Center height: 1500 mm d. Maximum turning diameter over the bed: 620 mm e. Spindle bore: 105 mm f. Speed range: 0-2500 rpm g. Motor power: 15 kW h. Dimensions: 3325x1350x1850 mm, weight: 2915 kg Blodpfxsz Hc Das Af Aen Machine complete with: Electronic handwheel for X-Y axes; Servo motor for the main axis; Safety guards compliant with CE standards; Chip collection tray; Complete cooling system including tank and pump; Centralized and automatic lubrication for the guides; Work area lighting; Leveling supports; Reduction bushing for spindle and tailstock; Complete fairing compliant with CE standards. - Excluding transportation - Net price: €41,500.00 + VAT (excluding VAT and transportation)

Condition: used, mileage: 9,10,003 km, power: 278 kW (377.97 HP), first registration: 05/2016, fuel type: diesel, overall weight: 21,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Additional information: * Load capacity: 13,290 kg * Height: 3,900 mm * Width: 2,540 mm * Length: 5,990 mm * Type | Front axle: Michelin R * Tire size | Front axle: 385/55 R22.5 * Tire tread depth (inner, left) | Front axle: 40% * Tire tread depth (inner, right) | Front axle: 40% * Maximum axle load | Front axle: 8,000 kg * Type | Rear axle: Michelin R * Tire size | Rear axle: 315/70 R22.5 * Tire tread depth (outer, left) | Rear axle: 40% * Tire tread depth (inner, left) | Rear axle: 40% * Tire tread depth (outer, right) | Rear axle: 40% * Tire tread depth (inner, right) | Rear axle: 40% * Maximum axle load | Rear axle: 11,500 kg * Wheelbase: 380 cm * Cab: Yes * Position | Front axle: Front * Brand | Front axle: Other * Brake type | Front axle: Disc brakes * Suspension | Front axle: Parabolic springs * Position | Rear axle: Rear * Brand | Rear axle: Other * Brake type | Rear axle: Disc brakes * Suspension | Rear axle: Air suspension * Reduction | Rear axle: Single reduction * Twin tires | Rear axle: Yes * Driven | Rear axle: Yes * Differential lock | Rear axle: Yes Additional equipment: * 2-pedal control * Adaptive cruise control * Aluminum fuel tank * Trailer coupling * Anti-lock braking system (ABS) * Traction control * DAB radio * Roof spoiler * Differential lock * Electric windows * Electrically adjustable exterior mirrors * Electronic braking system (EBS) * ESP * Cruise control * Website * Air conditioning * Refrigerator * Air suspension * Fog lights * Parabolic suspension * Particle filter Bjdpfxjz Dduzo Af Aeln * Radio/CD player * Disc brakes Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We kindly request you to inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Movement Z-axis 850 mm Movement W-axis (subspindle to mainspindle) 830 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Bedpjzv Smfefx Af Ajln Number of driven tools 12 x Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 5135, EUROMAC STX FLEX 6 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2018 - Serial number: 5135 - Max. punching force: 22 t Blsdpjz Aarcjfx Af Asn - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor Bodpfxjycvaqj Af Aeln The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.3265mm Width/depth (product): approx.1065mm Height (product): approx.1550mm Weight (net): approx.1965kg Working ranges: Center height: 230mm Center width: 2060mm Circumferential diameter over machine bed: 460mm Circumferential diameter in the bed bridge: 690mm Swing diameter over cross slide: 270mm Turning length in the bed bridge: 240mm Bed width: 300mm Speed range: Number of speed ranges: 12 Speed range: 25 - 2000min¯¹ Electrical data: Bjdpfx Afeq Ukbps Asln Power drive motor5.5kW Supply voltage400V Mains frequency50Hz Cooling lubricant system Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar passage diameter: 58mm Steel holder max. mounting height: 25mm Spindle cone: MK 6 Tailstock: Tailstock holder: MK 4 Tailstock quill stroke: 130mm Tailstock quill diameter: 60mm Pitch: Pitch metric:0.1 - 14mm/rev Number of leads metric: 41 Pitch inch: 112 - 2Gg/1" Number of pitches inch:41 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches:34 Travel distance: Top slide travel: 125mm Travel of face slide: 285mm Bed slide travel: 1805mm Feed rate: Feed range longitudinal: 0.031 - 1.7mm/rev Number of longitudinal feeds: 42 Feed range flat: 0.014 - 0.784mm/rev Number of feeds flat: 42 Electrical connection: Total connected load: 5.8kW

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 425 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 17,000 W, total height: 2,230 mm, total width: 1,800 mm, overall weight: 6,460 kg, controller manufacturer: FAGOR, product length (max.): 5,530 mm, number of axes: 2, This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information. Bedpfsybbiuex Af Aoln • Max. swing over bed: approx. 400 mm • Max. turning diameter: approx. 400 mm • Distance between centers: 3,000 mm • Bar capacity: approx. 105 mm • Spindle • Main spindle: horizontal • Spindle bore: 105 mm • Spindle nose: A2-type (depending on configuration) • Speed range: variable (CNC-controlled) • High-torque spindle suitable for heavy turning • Range I: 0 - 424 rpm • Range II: 425 - 1700 rpm • Axes • X-axis: cross slide • Z-axis: longitudinal slide • CNC-controlled feed and rapid traverse • Tool system • Turret: CNC tool turret • Number of tool stations: depending on configuration • Suitable for internal and external turning • Control system • CNC control: Fanuc / Siemens (depending on configuration) • Full CNC contouring and threading capability • Application • Medium to heavy-duty turning • For shafts, pipes, flanges, and general production parts • Suitable for series and job-shop production • A ball screw was replaced about 3 years ago • Accessories: 1 Lynette and various tool holders Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, spindle speed (max.): 20,000 rpm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 480 mm, controller model: SIEMENS 840D SL, TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 520 mm Travel Z-axis: 480 mm Rapid traverse X: 40 m/min Rapid traverse Y: 40 m/min Rapid traverse Z: 30 m/min Blsdpfxjxrctns Af Asn Tool holder: HSK 63A Max. spindle speed: 20,000 rpm MACHINE DETAILS Control model: SIEMENS 840D SL Dimensions & Weight Passage size: 2.40 x 2.80 m Net weight: 8,500 kg EQUIPMENT Chip conveyor Swivel head Digital linear scales (0.0001 mm) CTS spindle cooling Chip extraction system

Condition: excellent (used), EMCO TURN 365 – CNC Turning Center For sale: EMCO TURN 365 CNC turning center, in excellent technical condition, immediately available and ready for operation. Year of manufacture: 2000 EMCO Turn 368/65 Operating hours: 53,000 Year: 2000 Chip conveyor Drip tray Maximum swing diameter over bed [mm]: ø600 Swing diameter over cross slide [mm]: ø360 Maximum turning diameter [mm]: ø310 Maximum workpiece length [mm]: 520 Maximum bar capacity [mm]: ø65 Distance between centers (spindle nose – tailstock center) [mm]: 669 X-axis travel [mm]: 210 Z-axis travel [mm]: 610 AC motor power (Sinumerik / Fanuc) with integrated holding brake [kW]: 24.4 / 22 Spindle speed range (stepless) [rpm]: 60 – 3200 Max. torque (Sinumerik / Fanuc) [Nm]: 267 / 242 C-axis (rotary axis) on main spindle Rotary axis resolution [°]: 0.001 Rapid traverse speed Siemens / Fanuc [mm/min]: 1000 / 100 Automatic tailstock, hydraulically actuated Tailstock travel [mm]: 500 Max. tailstock force [N]: 8,000 Travel speed [m/min]: approx. 20 Tailstock quill taper: MT 4 Disc turret with directional logic, optionally with driven tools Number of tool stations: 12 Tool holders according to DIN 69880 VDI 30 Tool cross-section for square tools [mm]: 20 × 20 Boring bar diameter [mm]: ø32 Bsdpfxoxiy Uks Af Aoln Number of driven tool stations: 12 Speed range [rpm]: 0 – 5,000 Max. drive power [kW]: 5 Max. torque [Nm]: 20 • Control: Sinumerik 810D/840D (ShopTurn 6.4) • Machine weight: approx. 4,000 kg • Installation dimensions (L × W × H): approx. 4,000 × 2,000 × 2,000 mm — Condition & Scope of Delivery The machine is in very well-maintained condition. The offer includes comprehensive documentation including operator’s manual. • Inspection possible at any time • Free loading • Delivery by arrangement possible — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices subject to VAT. Errors and alterations excepted.

Condition: good (used), Year of construction: 2016, FOR SALE CNC Lathe TOP TURN S20C – Year 2016 Brand: TOP TURN (Distributed by major machine tool networks) Model: S20C Year: 2016 CNC Control: FAGOR (User-friendly interface for teaching cycles and ISO programming) Technical Description This 2016 CNC lathe is a versatile machine, ideal for precision work in small to medium production batches. Its modern design offers excellent rigidity and very quick set-up, thanks to the Fagor control system. Capacity: - Swing over bed: 400 mm - Swing over carriage: 210 mm - Distance between centers: 1,000 mm - Bed width: 300 mm Spindle: - Spindle bore: 52 mm (Comfortable bar capacity) - Spindle speed: Up to 2,500 rpm - Spindle nose: Camlock D1-6 Included Equipment - FAGOR CNC: Color screen, cycle-assisted programming (ideal for operators used to conventional machines) - Turret: Automatic turret (electric/hydraulic) for fast and programmable tool changes - Chuck: Precision 3-jaw chuck (approx. 200 mm diameter) - Tailstock: CM4, robust - Safety: Fully enclosed machine with interlocked sliding doors, compliant with CE standards - Coolant system: Centralized with integrated chip tray Highlights - Recent (2016): Modern electronic and mechanical components, easy to source spare parts Blodpfxsy Sltte Af Aen - Precision: High-precision ball screws on both axes - Compact: Small footprint relative to its machining capacity Weight and Dimensions - Dimensions: Approx. 2,400 x 1,400 x 1,700 mm - Weight: Approx. 1,800 kg

Year of construction: 1981, condition: good (used), Spindle motor for CNC lathe MAZAK SLAT TURN 30, year of manufacture 1981. Bedpfx Aexr Dhyof Aoln

Condition: used, Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 87 mm, turning diameter: 380 mm, turning length: 1,000 mm, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, travel distance X-axis: 190 mm, travel distance Z-axis: 1,090 mm, VICTOR VTURN-26 / 110 – LIVE TOOLING - Manufacturer: Victor - Model: Vturn-26 / 110 - Year: 1998 - Machine Type: CNC Turning Center with Live Tooling - Number of Axes: 3 (X / Z / C) - C-Axis: Included - Live Tooling: 8 Driven Tools - Bar Feeder: Included - X-Axis Travel: Approx. 190 mm - Z-Axis Travel: Approx. 1,090 mm - Maximum Turning Length: Approx. 1,000–1,100 mm - Swing Over Bed: Approx. 520 mm - Maximum Turning Diameter: Approx. 380 mm - Spindle Speed: Up to 3,500 rpm - Spindle Nose: A2-8 - Bar Capacity: Approx. 75 mm - Spindle Bore: Approx. 87 mm - Spindle Motor Power: Approx. 18.5 kW Blsdpfx Afozvfrus Aen - Turret: Live Tool Turret - Machine Dimensions: Approx. 4,400 × 1,700 × 1,900 mm - Machine Weight: Approx. 6,000 kg - Bar Feeder: Included

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, Pinacho Tour lathe Type SE 200 Year 2023 Blsdpfx Asz Ehx Tof Aon Fagor CNC Made in Spain Includes tooling Includes safety glasses Machine in like-new condition, with only 200 hours of use Exact Model: Pinacho SE 200-42 Ax1000/S1 Key Features: Only 200 hours of use Almost new condition

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 50 h, MEKITurn KT660 x 1500 - conventional lathe with FAGOR iT30 measuring system. Precise conventional turning and solid machine construction. Bedez E H Nqjpfx Af Aeln Demonstration machine, year of manufacture 2024, approximately 50 operating hours, and immediately available. TECHNICAL DATA Swing over bed: 660 mm Swing over cross slide: approx. 430 to 440 mm Swing over compound slide: approx. 820 to 845 mm Distance between centers: 1540 mm Center height: 330 mm Bed width: 400 mm Spindle bore: 105 mm Spindle nose: D1-11 Spindle speed: 15 to 1200 rpm Number of speed steps: 12 Main motor: 11 kW Tailstock quill: diameter 75 mm Quill travel: 160 mm Tailstock arbor: MK5 Machine weight: approx. 2580 kg EQUIPMENT FAGOR iT30 measuring system Cooling system Tailstock Steady rest 315 mm scroll chuck Safety devices German CE declaration of conformity, issued by the German importer PRICE AND LOCATION Special price on request, ex works 66706 Perl-Besch, Germany. Seller: 3M-Consulting SARL. Delivery, installation and commissioning at the customer's site possible for an additional charge. WARRANTY For Germany and Luxembourg: 6 months warranty from handover, including materials and labor. Travel costs are not included. Outside Germany and Luxembourg: 6 months warranty on materials from delivery. Labor and travel costs are not included. Technical specifications according to the present and confirmed data sheet.

Condition: excellent (used), Year of construction: 2006, EMCO E65 TCM CNC turning machine Technical specifications •Manufacturer: EMCO Bsdpfezvpqhox Af Ajln •Model: E65 •Year of manufacture: 2006 •Machine number: R6EU1351 •Control system: Fanuc 0i •Bar diameter: Ø 65 mm •Axes: X / Z / C – 210 / 610 mm / 360° •Tool turret: 12 driven tool stations •Tool holder: VDI 30 Equipment •Bar loader •Chip conveyor •12 driven tool stations •VDI 30 interface Software options •Manual Guide i •Polar interpolation •Cylindrical interpolation •Helical milling

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min Bedpfx Aou Ixwijf Asln tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine approx.LxWxH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Bljdpezwgiqsfx Af Ajn

Condition: used, Year of construction: 2000, Technical details: Blodpfx Ajx Dcgxjf Aen turning diameter: 360 mm turning length: 520 mm total power requirement: 20 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3 x 2 x 2 m