Used Profi Press Pphb-28Nc for sale (13,761)

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 1 h, type of input current: three-phase, table width: 1,000 mm, table length: 2,600 mm, total length: 2,000 mm, total width: 3,090 mm, total height: 3,600 mm, overall weight: 3,800 kg, workpiece height (max.): 60 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Gedpjtx T Tyefx Albjiu

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Gijdpfx Alou Axfcebeu Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: new, Year of construction: 2026, ZGR-3640/0.8 Warrenty: 12 months Certificate CE Eccentric pressure that is transferred to both sides of the machine Working length: 3640mm to the plate thickness of 0,8 mm STEEL SHEET 0,8 mm TITAN-ZINC-PLATE 0,8 mm, Godpfxocka N Us Albsiu ALUMINIUM SHEET 1,2 mm , COPPER PLATE 0.8 mm, NIRO-SHEET 0,5 mm , Bending beam: 24 mm Bending angle: 145 degrees Cutting in the whole working length, Lift the upper beam in three layers, maximum width between the beams 80 mm rear frame for holding sheet, weight: 650 Kg Shears - with regulation of scissors guide and the rolls, which are made of high-alloy steel of very high resistance to wear. This allows cutting of sheet metal over a very long period without sharping the rotary shear. The performance of the rotary shear is about 40km sheet with a thickness of 0.5 mm - up to the first sharpening. The shears can be sharpened on average 35 times. The rotary shear weighs about 6.5 Kg. The price of this item does not include VAT. For invoice, we need the active VAT No. We provide VAT invoices from the tax rate of 0%. If you wish to order private, you should contact us.

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! Giodpsh Rkhnefx Albju 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: new, Year of construction: 2025, Folding bench bending machine with cutouts in cheeks, with the possibility to finish bending window sills on three sides. Cutouts from 6 cm up and 6 cm down. This modern press brake has a lot of space inside and a narrow 15 mm bending beam. The offered bending machine Red 2700 / 1.0 is an alternative to the segment bending machine for less complex work. We get this possibility thanks to the construction with special cutouts. This machine performs bending operations from the top up and down. The strengths of this bending machine include high performance while maintaining the precision and repeatability of the machining. Intended for processing steel, aluminum and other sheet metal. This folding bench is extremely functional. Godpfx Alob H Ac Iobsiu RED 2700 / 1.0mm Technical specifications: - maximum working width: 2580 mm - Bending performance: up to 1.0 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 160 degrees - The cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops - Weight: approx. 490 kg The roller shears (max. Cutting capacity 0.8 mm / steel) + 350 Euro The machine complies with the CE guidelines and has a 12-month guarantee. Delivery time: 2-4 days We issue the invoices with 0% (intra-community delivery) We are looking forward to your contact!

Condition: new, Year of construction: 2025, All roof bending machines from PROD-MASZ are valued not only by customers from Germany, but also from all over the world. Thanks to the fact that we have been manufacturing and supplying machines that meet individual requirements for years, we have established ourselves as the market leader for bending machines in Europe and worldwide. Every roofing machine we supply has a strong and durable construction, it is manufactured to the best standards. Bending beam only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Bending beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg Roller shears + 350 Euro The front depth stops and rear frame are also included in the price. Gedpfx Aleb Eg Nkjboiu Bending from 3 sides -ᐳ cutouts laterally 60mm / 45 ° recess Price: 5100.00 EUR Delivery date: every week We are looking forward to your contact! Invoices are issued either with 0% as intra-Community delivery.

Condition: excellent (used), Year of construction: 2002, You are purchasing an ironing system Gsdju Nyu Sspfx Albjiu Presse Vite ironing/steam table with 4 height-adjustable whirlpool hoods and 2 steam generators Working width approx. 340 cm, 9000W Year of manufacture 2002 223-380V Pr12LP Control unit GE VAT20 U20NOK7S Find more items in our shop!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants Gjdpfsyvgiaex Alboiu

Condition: refurbished (used), functionality: fully functional, The 2024 general overhaul includes, among other things, the die roller, the hydraulic nut, the bearings, the main shaft, the oil pump with filter, and synthetic oil. Only the steel housing is older, but it is in excellent condition. The images of the production line in the hall are from before the overhaul. The individual images of the Amandus Kahl pellet press show the condition after the overhaul. TECHNICAL DETAILS Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h MACHINE DETAILS Motor year of manufacture: 2024 Cooler with sieve year of manufacture: 2015 Conveyor belt year of manufacture: 2015 Feed screw year of manufacture: 2015 EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electric control cabinet with emergency stop Complete electrical documentation Conveyor belt Sieve system with automatic cooling Gisdpfx Alozaricebou Hydraulic nut Die roller Electrical wiring Metering screw for product feed Automatic metering system for filling 4 additional dies of 6 mm 60 liters of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump 20 liters of 800/460 synthetic oil 1 new pressure piece (main shaft) Documentation of the overhauled and renewed parts

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 8900, functionality: fully functional, pressing force: 20 t, stroke length: 60 mm, throat depth: 176 mm, ram adjustment: 55 mm, stroke rate (max.): 155 1/min, TECHNICAL DETAILS Pressing force: 20 t Stroke rate: 155 strokes/min Ram stroke: 6 - 60 mm Ram adjustment: 55 mm Ram contact area: 130 x 248 mm Dowel hole in the ram: 25 x 65 mm Inclination: 28 ° Overhang: 176 mm Distance from table to ram: 270 mm Passage width: 470 mm Table dimensions: 300 x 450 mm Gisdpfx Ajzb Du Holbou Through hole in the table: 90 mm Table height above floor: 775 mm Air pressure (required): 5.5 - 6 bar MACHINE DETAILS Total power consumption: 3.5 kW Control type: conventional Dimensions & Weight Machine dimensions (L x W x H): 1,300 x 1,100 x 1,950 m Machine weight: 1 t EQUIPMENT High-performance press Central lubrication with light curtain (monitored) Linuflex Stroke counter Steel plate (dimensions: 315 x 400 x 50 mm) with center hole (diameter: 63 mm)

Condition: used, Year of construction: 1996, We offer this used MAN Roland R-704 3B offset printing press, year of manufacture 1996. With Fuji 120 KVA UPS with Battery. (Unused) Gisdpfxozcfbws Albju Type: R-704 3B Serial number: 26019 B Year of manufacture: 1996 year Country of manufacture: Germany Electrical equipment standard: IEC If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 31765 B, color channels: 5, paper weight (min.): 50 g/m², paper weight (max.): 400 g/m², paper width (max.): 744 mm, paper height (max.): 592 mm, counter reading (color): 2,50,00,000, Key Technical Features & Benefits Maximum Production Speed: Runs up to 18,000 sheets per hour, ensuring you hit even the tightest deadlines. Substrate Flexibility: Effortlessly handles different gsm materials It’s a true "all-rounder" for paper and thick cardboard. Large Transferters: Double-diameter transfer cylinders and impression cylinders ensure "mark-free" printing and a smoother sheet travel path. Quick Start-Up: Features advanced automation for plate loading and wash-ups, significantly reducing make-ready times and substrate waste. Pecom Control System: Integrated console for precise remote ink and register control, ensuring color consistency across long runs. Ergonomic Design: Low-profile construction for easier access and maintenance compared to taller competitors. Automation: PPL (Power Plate Loading) / Automatic Wash-upInking Units: 16-roller high-performance inking system All units are UV Prepared 1 UNIT UV INTERDECK PLUS END OF PRESS UV Gijdpfx Ajy Ipmvolbou Also has an IR DRYER

Condition: new, Equipment: CE marking, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN Gjdpfx Aoy U Hmgslboiu 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm 5 Stroke 250 mm 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA69T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Giedpfxjy Uiyve Albju Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Frame Section Gedpfjy Uc Nksx Albeiu It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Gsdpehga Srefx Albsiu Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Solid construction – weight 76 kg. 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Godpozdazhefx Alboiu Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Gjdpfxszdazbo Albjiu Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland Giodpfx Aszdaxyslbou

Condition: good (used), Nagel Citoborma 180 Paper Drill with Pedestal The machine is in 100% working order. Godpfx Alszdawvjbjiu Very good condition. Solid construction – weighs approximately 100 kg. This is one of the newest Citoborma drill models. 230V power supply. One drilling head. Drill diameter: 2-20 mm. Stack height: 60 mm. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. In addition, the drill has an automatic table lock that releases after each cycle. The set includes drill bits, tools, a new cutting stick, and instructions.

Condition: good (used), Nagel Citoborma 180 Paper Drill Gjdpszdav Eofx Alboiu This machine is 100% functional. This is the latest model. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Very good condition. Solid construction – weight 65 kg. 230V power supply One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Baier Geba 1/P Hot Stamping Press The machine is in perfect condition and ready to use. This machine is from the popular hot stamping manufacturer Gebrüder Baier KG, manufactured in Germany. A stand is included. Description The Baier Geba 1/P hot stamping press is an automatic press for hot stamping, embossing, and die-cutting paper and plastics. It’s a useful device in any advertising agency or printing house. The automatic presser starts and operates on a 230V power supply with compressed air. A powerful presser with adjustable pressure ensures repeatability and very high pressure of the die against the material. The machine features a worktop with a slide-out function, adjustable embossing depth, and a heating plate with a thermostat. Gijdpfxjzdaune Albsu Specifications: Heating temperature control Heating plate pressure mechanism: automatic Press force: 8 kN Power consumption: 320 W Plate size: 110 x 70 mm Power supply: 230 V Machine weight: 150 kg

Condition: excellent (used), functionality: fully functional, Italprasse SR 3/100 frame press Working length: 3000 mm Working height: 1800 mm 3 vertical cylinders 2 horizontal cylinders Gsdpfxezc E H Ts Albeiu

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 60 t, stroke length: 160 mm, operating speed: 10 mm/s, reverse speed: 90 mm/s, throat depth: 320 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, Standard Equipment Stroke: 160 mm Daylight (Distance between upper and lower dies): 380 mm Throat Depth: 320 mm Bending Length: 2100 mm Distance between Columns: 1700 mm Machine Features Double-cylinder upper beam bending system Steel frame and upper beam construction providing high static and dynamic rigidity Upper beam movement supported by fiber slide bearings High-strength balance shaft and eccentric bearing system for maintaining parallelism Motor-controlled angle adjustment with a mechanical stroke system within the cylinders Wide working clearance suitable for using different dies Tonnage adjustment and bottom dead center stop via NC control unit Hydraulic safety system against overpressure Dual-speed operating system consisting of free descent, bending, and fast return CE-compliant multi-functional foot pedal and emergency stop system Compact hydraulic power unit with HAWE or Rexroth components Remote service support with Siemens, Pizzato, and Balluff electrical equipment LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines of memory per program Gijdezcmbfspfx Albeu Easy program loading and downloading via USB Standard upper and lower die set NC-controlled motorized X-axis back gauge (600 mm) Linear guide and programmable back gauge system 0.2 mm positioning accuracy Motor-controlled Y-axis angle adjustment Mobile control panel Front support arms with linear guides Lower die centering and fixing bolts Programmable precision back gauge retraction function Optional Equipment Motorized R-axis Custom bending dies Dual-hand and foot-controlled special pedal system DSP or FIESSLER safety systems Extended back gauge distance Additional back gauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 60 Tons Maximum Bending Capacity: 4 mm Bending Length: 2100 mm Distance between Columns: 1700 mm Stroke: 160 mm Bending Speed: 10 mm/s Idle Descent Speed: 90 mm/s Throat Depth: 320 mm Daylight: 380 mm Table Width: 100 mm Table Height: 845 mm Main Motor Power: 7.5 kW X-Axis Motor: 0.75 kW Y-Axis Motor: 0.37 kW Optional R-Axis Motor: 0.25 kW Back Gauge Distance: 600 mm Oil Tank Capacity: 120 L Machine Length: 2450 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 4340 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Condition: like new (used), Year of construction: 2026, power: 3 kW (4.08 HP), pressing force: 30 t, stroke length: 150 mm, operating speed: 10 mm/s, reverse speed: 70 mm/s, throat depth: 255 mm, ram plate length: 1,270 mm, Equipment: CE marking, documentation/manual, safety light barrier, Standard Equipment Stroke: 150 mm Distance Between Upper and Lower Dies (Daylight): 265 mm Throat Depth: 255 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Machine Features Double-cylinder upper beam bending system Steel frame construction providing high static and dynamic rigidity Upper beam movement supported by fiber slide bearings High-strength balancing shaft and eccentric bearing system supporting parallelism Motor-controlled angle adjustment with a mechanical stroke system inside the cylinder Wide opening and high stroke suitable for use with different dies Easy tonnage adjustment and bottom dead center stop via NC control Hydraulic safety system against overpressure Dual-speed operating system consisting of free descent, bending, and fast return CE-compliant, multi-functional foot pedal with emergency stop Compact hydraulic power unit, top-mounted, with HAWE or Rexroth components Siemens, Pizzato, and Balluff electrical components LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines per program Program transfer via USB Standard upper and lower die set NC-controlled motorized X-axis back gauge (500 mm) Back gauge system with linear slides 0.2 mm positioning accuracy Motor-controlled Y-axis angle adjustment Mobile control panel Front support arms with linear slides Lower die centering bolts Programmable, precise back gauge retraction function Optional Equipment Motorized R-axis Special bending dies Special pedal system with dual-hand + foot control DSP or Fiessler safety systems Extended back gauge distance Additional back gauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 30 tons Maximum Bending Capacity: 4 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Stroke: 150 mm Bending Speed: 10 mm/s Free Descent Speed: 70 mm/s Throat Depth: 255 mm Distance Between Upper and Lower Dies: 265 mm Table Width: 130 mm Table Height: 830 mm Main Motor Power: 3 kW X-Axis Motor: 0.55 kW Y-Axis Motor: 0.18 kW Optional R-Axis Motor: 0.25 kW Back Gauge Distance: 500 mm Oil Tank Capacity: 90 L Machine Length: 1780 mm Machine Width: 1375 mm Machine Height: 2160 mm Gisdpfszcl S Nsx Albou Machine Weight: 1700 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina