Used Reform Ar51 Type 7 for sale (56,081)

Condition: good (used), Year of construction: 1978, Knife grinding machine with 1300 mm grinding length, equipped with a swiveling magnetic rail. The machine is labeled Vollmer but was built by Reform. Function tested. Tsdpfx Afsynt I Nj Aec

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Tsdpfx Asz En Axef Aec Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Year of construction: 1999, condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower Tjdpfx Aez Hu S Nef Asc -Manufacturer: Cattinair, radial fan, extraction blower -Type: XR CM B11R-4-7 -Motor: ABB 9.20 kW 2825 rpm -Inlet connection: Ø 240 mm -Outlet connection: Ø 240 mm -Fan wheel: Ø 460 x 80 mm -Protection class: IP 55 -Dimensions: 1030/890/H1040 mm -Weight: 194 kg

Condition: used, maximum load weight: 660 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2025, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 1,125 mm, total width: 1,510 mm, total height: 1,125 mm, A64 GWN01572722 Low-loader trailer Unsinn, type WEB T 2111-7-13, tarpaulin and frame, internal height 125 cm, gross vehicle weight 750 kg, 100 km/h, Vehicle not prepared Errors and prior sale excepted. Tjdeyqdmzopfx Af Ajc

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, STAR SR20J II TYPE A Year 2023 Fanuc CNC Control 32i model B Tedpfszqduksx Af Aoc 20mm Maximum Bar Capacity Y-Axis & C-Axis Capability Live Tooling ALPPS TOOL CO ASR X-20ASII BARFEEDER LNS Swarf Conveyor Very Low Hours Brass-Only Production Since New Selection of Tooling & Consumables Included Machine available near end september 2026

Year of construction: 2020, operating hours: 414 h, condition: used, functionality: fully functional, machine/vehicle number: C-322-K7-13853, We offer this used MultiCam Celero 7 Flatbed cutter / CNC Router, year of construction 2020. Tsdpfozvvc Dox Af Ajc Serial Number: C-322-K7-13853 Year of Manufacture: 2020 year Voltage: 380 V Phases: 3 Ph Current: 58.2 A Power: 38.3 kW Frequency: 50/60 Hz Comes with HF Spindle, Two Knife modules, ATC, Depth Adjustment Sensor, Laser Pointer If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Tjdpfxez Ekbks Af Aoc Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042

Condition: used, Year of construction: 1997, functionality: fully functional, total height: 4,000 mm, total width: 5,000 mm, total length: 5,000 mm, overall weight: 16,000 kg, ANAYAK FBZ-HV-2000 – CNC Bed Milling Machine Manufacturer: ANAYAK – Industrias Anayak S.A., Spain Model: FBZ-HV-2000 Machine Type: CNC Bed Milling Machine / Universal Bed Milling Machine Year of Manufacture: 1997 Condition: Used Technical Data • Travel X: 2,000 mm • Travel Y: 935 mm • Travel Z: 1,000 mm • Table Dimensions: 900x • Spindle Taper: ISO 50 • Spindle Speed: 60 - 3000 rpm • Control System: CNC Control HEIDENHAIN TNC 426 • Feed Rate X/Y/Z: 1 - 3000 mm/min • Rapid Traverse: 10 m/min Todpfxsz Epz Ao Af Ajc • Universal Milling Head: Yes • Coolant System: Yes • Chip Conveyor: Yes • Electrical Connection: 50 kW • Machine Weight: 16,000 kg Documentation available ANAYAK FBZ-HV-2000 CNC Bed Milling Machine, year of manufacture 1997. Working area X 2,000 mm. Inspection possible by appointment. Sale from current location.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 871, Completely refurbished film extruder. Todpez Hvipjfx Af Ajc Capacity: approximately 50-60 kg/h. Cylinder diameter: 40. Installed die head diameter: 100. Printing machine, refurbished and unused. Additionally, two complete die heads are included: Diameter: 75. Diameter: 120.

Condition: used, mileage: 2,12,103 km, power: 105 kW (142.76 HP), first registration: 08/2018, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2026, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space volume: 2 m³, loading space length: 2,600 mm, loading space width: 2,050 mm, loading space height: 390 mm, Equipment: ABS, central locking, electronic stability program (ESP), Vehicle No. for customer inquiries: 150 ----Special equipment: * Trailer hitch: ball head, for increased trailer load * 13-pin trailer socket * Audio system Audio 10 (radio with CD player) * 7-seater * Digital tachograph, downloadable * Generator 180 A * Spare wheel with road tires * Spare wheel holder under the end of the frame incl. jack * Interior rearview mirror * Rear wall with window * Seats in the cab: double passenger seat * Rear stabilizer reinforced * Front stabilizer reinforced * Shock absorbers reinforced * Fleece battery 95 Ah * Front axle reinforced ----Standard equipment: * Adaptive brake light * Airbag driver side * Anti-lock braking system (ABS) * Drive type: rear-wheel drive * Indicator for windshield washer fluid level * Exterior mirrors elect. adjustable and heated, both * Exterior mirrors with integrated turn signal * Battery 74 Ah * Brake assist * Braking system with ABS+ASR * Headliner in the cab * Electronic stability program (ESP) * Electric windows 2-way * Transmission 6-speed - TSG (Eco Gear) * Lockable glove compartment * Body/superstructure: platform with double cab * Fuel tank: main tank 75 liters * Headlight range adjustment * Model revision * Engine 2.1 L - 105 kW CDI CAT * Particulate filter * Wheelbase 3665 mm * Low emissions according to Euro 6 emission standard * Power steering * Safety belt system with warning system (driver side) * Seat cover / upholstery: fabric Lima * Seats in the cab: passenger seat with armrest * Seats in the cab: adjustable passenger seat * Seats in the cab: driver's seat with armrest * Steel rims 6.5x16 Tedpfey T Avnex Af Ajc * Service interval indicator Assyst * Immobilizer * Heat-protective glazing * Central locking with remote control * Permissible total weight 3.50 t ----Technical data: * Wheelbase: 3,665mm * Cargo space dimensions: L: 2,600mm W: 2,050mm H: 390mm * Payload: 1,080kg * Tire size: 235/65R16C * Tire tread: approx. 30%-40% ----German vehicle! * 11,750.00 EUR net plus VAT * TÜV (technical inspection) until 10/2026 * In case of export to third countries or EU, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange!! * Financing/leasing also possible in difficult cases * This description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/images provided are non-binding and do not constitute guaranteed characteristics. * We assume no liability for errors and obvious mistakes. * The buyer is obliged to independently verify the condition and equipment of the vehicles before purchase. * Subject to price changes, typing errors, errors and prior sale. * Dear customer, please understand that due to the age and mileage, we prefer to sell the vehicle to commercial businesses or dealers. Thank you very much. * We speak: * Greek / Miláme Elliniká Tel: +49.162.6567750 * Russian / My govorim na Russkom Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * E-mail: * * Internal number: 150

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Tedpfxez Eznze Af Asc Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed

Condition: good (used), Year of construction: 1999, functionality: fully functional, Tamroter Gardener Denver Screw Compressor Type ES 45-7.5 EANA Year 1999 S/N 09990138 Regular maintenance Operating hours: 17,482 h Start-up hours: 9,242 h Air flow: 1,712 h Oil flow: 663 h Oil change: 663 h Capacity 7.95 m3/min Motor 45 kW Voltage 400 V/50 Hz Weight 935 kg Tjdpourc Npefx Af Ajc CE marked

Condition: used, Year of construction: 1933, x-travel 1600 mm y-travel 1259 mm z-travel 1500 mm Tjdpfjz Aun Sjx Af Asc tool adaptor SK 50 weight 10,5 t output 49 kw feed 6000 m/min control Heidenhein 151 1600 min table: 1250-1400 mm serial number 1933 weight of the machine ca. 10,5 t

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz Tjdpsz Hngmjfx Af Aec • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Year of construction: 2024, operating hours: 150 h, condition: like new (used), functionality: fully functional, X AXIS (longitudinal) (mm) 7,500 Y AXIS (transversal) (mm) 1,280 Z AXIS (vertical) (mm) 640 A AXIS (vertical-horizontal rotation of the head) -90° ÷ +90° C AXIS (rotation on the vertical axis of the head) 0° ÷ 360° H AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 P AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 ELECTRIC SPINDLE Maximum power in S1 (kW) 11 Maximum power in S6 (60%) (kW) 13.5 Maximum speed (rpm) 24,000 Maximum torque in S6 (Nm) 10.7 Tjdpfjz Dpduox Af Ajc Tool holder taper HSK – 63F Maximum blade diameter 400 mm

Condition: used, mileage: 178 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2029, color: grey, gearing type: automatic, number of seats: 7, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 2,200 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, central locking, navigation system, High-roof panel van, mixed configuration, 7 seats, new vehicle, immediately available with a 5-year manufacturer's warranty from the date of initial registration up to a maximum of 100,000 km. Exhaust system EU6e (EC) All-wheel drive 4x4 8-speed automatic transmission for 4x4 4-cylinder turbo diesel engine, 2.0l, 130 kW BIT Common Rail Start-Stop system with brake energy recovery One towing eye in the front Tow hitch, fixed, towing capacity 3,500 kg Fuel tank 75 l Suspension and damping package with basic stabilization Rear axle differential lock, manually switchable, mechanical Approved for 3.5 tons Front axle with 1,800 kg load capacity Front axle design 2 Wheel arch in the middle with MAN logo 4 steel wheels 6 1/2 Jx16 with 1,200 kg load capacity, black Tires 235/65R16C 115/113R, optimized for rolling resistance Tire repair kit, 12-volt compressor and tire sealant All-season tires Battery 520A (92Ah) AGM battery (520A, 92Ah) and generator Battery and generator operating voltage 12 V Electronic immobilizer Wiring harness Electrical connection block and wiring harness preparation Alternator 140 A Climatic air conditioning in the cab Daytime running light control with auxiliary driving lights and "Coming Home" and "Leaving Home" function Halogen double headlights LED interior lighting concept in the passenger and cargo area Fog lights including cornering lights Exterior mirrors, electrically adjustable and heated Left exterior mirror, convex, with integrated LED turn signal and wide-angle view Right exterior mirror, convex, with integrated LED turn signal and wide-angle view High roof painted in vehicle color Grab handles on the rear pillars Radiator grille, black with chrome trim Hinges for rear swing doors Windshield wiper intermittent control with light and rain sensor Badges for type, tonnage, and engine power Sliding door on the right Laminated front windshield with heat-absorbing glazing Front bumper, gray with painted decorative trim in vehicle color Airbag for driver and front passenger with front passenger airbag deactivation switch Roof rack with storage compartments, two 1-DIN compartments, and reading light Sun visors, foldable and swiveling to the side Electronic parking brake Interior noise damping measures, Premium Glove compartment with lockable and illuminated lid Leather multifunction steering wheel with Tiptronic 12 V socket and 2 cup holders in the instrument panel Three-point automatic seatbelts with height adjustment and electric belt pretensioners in the front Two 12 V sockets in the cab in the instrument panel Seatbelt warning light with electronic contact in the seatbelt buckle 2 remote control keys Keyless-Go Comfort seat, left Double passenger seat on the right with storage compartment and folding center backrest Seat covers in artificial leather mesh, palladium titanium black, pearl gray Instrument panel with special body structure Smart TCO 2.0 with Toll-Collect preparation, including DSRC antenna Digital combined instrument Tire pressure monitoring system USB Type C data and charging socket with increased power 4 speakers, 2 tweeters, 2 woofers MAN Media VAN Digital radio reception (DAB+) Tjdpfx Afey A U Hds Aec MAN Smart Link MAN Connect (call services) with OCU3 low 3-button module Comfort telephony without external antenna connection Hill start assist Multifunction camera Emergency brake assist ESP with electronic differential lock, anti-slip regulation ASR, and ABS Park assist front and rear Cruise control Traffic sign recogn

Condition: used, Year of construction: 2015, Technical details: lifting capacity: 0,8 t span width: 4375 mm Arm length: 4375 bis Kranhaken mm height lower edge cantilever arm: 3660 mm cantilever arm length from center column: 4650 mm lifting height max. hook position: 3300 mm column diameter: 410 mm rotation: momentan ca. 100° begrenzt ° total power requirement: 1,8 kW The pillar-mounted slewing jib crane consists of the following main groups: Boom Hoist: Vetter chain hoist type SICH6BF, lifting height 2000mm, hook Ø 43mm with rope safety device; load chain type 7 x 20 double chain Tedpfx Afeu Nvmqe Aec Support column H: 4000mm with flange Ø 610mm Crane control via pendant control Beam Manual operation (slewing) Chain hoist on beam *

Condition: excellent (used), Year of construction: 2015, REFORM M14 Hydro carrier with R2 rotary harrow Technical data: ENGINE: 4-stroke gasoline engine: 21 hp Briggs & Stratton, 2-cylinder, 4-stroke gasoline engine Tedpfx Afoizi Nao Aec DRIVE: hydrostatic, continuously variable drive, direction and speed adjustable electro-hydraulically via rocker switches on the steering handle with integrated, continuously adjustable creep speed control. SPEED: Forward 0 - 9.0 km/h, Reverse 0 - 4.0 km/h AXLE: continuously adjustable in length (120 mm) for center of gravity adjustment or to reduce load on the implement STEERING: finely adjustable hydraulic steering, operated via 2 steering levers on the left and right of the handle. Hydraulic differential lock effect when driving straight. IMPLEMENT ATTACHMENT: self-centering quick-release coupling PTO SHAFT: drive-independent front PTO shaft, 874 rpm at 3400 rpm engine speed, clockwise rotation EQUIPMENT: elastically mounted, height- and side-adjustable steering handle, emergency stop lever on the left on the steering handle grip WEIGHT: 220 kg Tires: 23x8.50-12AS Terra low-pressure wide tires Attached implement: - R2 MTL-100 rotary harrow (unused) This REFORM M14 is in very good overall condition, has just been serviced, and is ready for immediate use! - The price is quoted excluding 19% VAT. - Inspection/test drive is possible at any time. - Shipping by freight forwarder: €220 - Financing/leasing can be arranged individually for you!

Condition: new, Sieb & Meyer 0362141EF1005 Type: 86/9 S 30110180 frequency inverter SN: 1000349178, unused in opened original packaging, 100% functional, scope of delivery as per photos. Tedpfxey Nr Aps Af Asc

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fanuc S-500iB robot, R-J3iB with 7th axis/motor Year of manufacture: 8/2006 Controller: R-J3iB Number of axes: 6 Max. payload: 15 kg Max. working range: approx. 2757 mm Profibus Tsdezmtg Uspfx Af Ajc Included in delivery: Robot, controller, cables, teach pendant, operating manual, wiring diagrams Used item – shows normal signs of wear. Further details, article numbers and pictures available upon request. Two weeks start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city and postal code. Freight costs available upon request – please specify the delivery address.

Condition: new, Sieb & Meyer 0362141EF1005 Type: 86/9 S 30110180 Frequency inverter SN: 1000367837, unused in opened original packaging, 100% fully functional, scope of delivery as per photos. Tjdpfoy Nr Avex Af Ajc

Condition: used, Year of construction: 2014, Year of manufacture: 2014 Broshuis 7ABSD 7 axle semi / stepframe lowloader 07-2014 Hydraulic suspension 245/70R17.5 tyres Last 6 axles Hydraulic steert Extra remote steering (radio control) First 2 Axle’s are lift axles Hydraulic Gooseneck Its own 24V electro-hydraulic powerpack Loadingfloorlenght 11.900 mm + 9.000 mm + 8.800 mm extendible Total length 16.350 mm + 9.000 mm + 8.800 mm till 34.150 mm Width 2.730 Weights in kg 7 x 12.300 kg axle load 30.000 kg fifth wheel load 116.100 kg total weight Tjdpfxjz H U Sio Af Aec Ca 26.320 kg own weight Ca 89.780 kg loading capacity ABS

Year of construction: 2013, condition: like new (used), functionality: fully functional, machine/vehicle number: 42L01-A00-00, Masuko Sangyo Ceren Miller MKCL8-15 Dry DAU - air-flow type ultra-fine micronizer Todpfxjz D A A Dj Af Aec Specifications Model MKCL8-15 Motor 11Kw , 3P Standard capacity 10~30kg/Hr External dimensions W×L×H 1000×1400×1800mm Weight 280kg

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: 8116, For sale is a robust and versatile vertical console milling machine (turret mill) from the renowned Taiwanese manufacturer King Rich, model KR-V3000V, manufactured in 1997. The machine is based on the proven Bridgeport concept and is characterized by its extremely flexible geometry: the milling head can be tilted, and the upper arm can be rotated and moved. This makes it the ideal all-around machine for repair shops, jig and fixture manufacturing, workshops, or demanding users. Technical data & details: • Manufacturer: King Rich Industries Co., Ltd. (Taiwan) • Model: KR-V3000V • Year of manufacture: 1997 • Control: Conventional (manual) Tjdpfxoz Hi S Dj Af Asc • Spindle mount: ISO 40 (standard) • Main motor power: 3.75 kW (total connected load 5.16 kW) • Power connection: 415 V / 3 phases (high voltage) • Weight: approx. 1,600 kg (massive cast iron body) • Equipment: Automatic table feed (X-axis) installed Condition: The machine is in its original, as-is condition, directly from operation, and shows the typical wear and tear of a workshop machine. The guide rails do not show any deep rust visually. Inspection & Functionality: The machine is fully functional and can be inspected and tested on-site with power connected after prior arrangement. The scope of delivery includes the operating manual and a box with spare parts. Price: €3,600 payable in advance Note for collection: The buyer is responsible for the transport and loading. Assistance with loading can be provided.

Condition: used, all stainless steel belt width 1.000 mm adjustable height finished product from 2 up to 35 mm speed of the belts is separately adjustable with outfeed belt Tjdpfxez H Ummj Af Aec mobile 3 kW dimensions (l x w x h) : ± 2.400 x 1.200 x 1.500 mm