Used Rhtc Section Bender for sale (3,185)

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons Hsdpfsium Stjx Ab Iont - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: used, Year of construction: 2016, functionality: fully functional, A flexible induction bending machine (Liming Electrical & Machinery Factory) for bending and curving tubes (pipes), box sections, wide flange beams, and channels. This 30” capacity induction bending machine was installed in 2017 at our works in Oldbury in the UK. THE MACHINE CAPACITY: Tube / Pipes Hjdpfeupia Nox Ab Ient From Ø165 up to Ø762 6" up to 30" (USA) Beams (easy way & hard way) IPE 600 & HEB 600 W27 x 178 (USA) Box Sections 100 x 100 up to 500 x 500 4" x 4" up to 20" x 20" (USA) Channels UPN 50 up to UPN 400 C6 x 8.2 up to C15 x 50 (USA)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KF0310KMB20260601, type of input current: three-phase, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, space requirement length: 6,200 mm, space requirement height: 2,650 mm, space requirement width: 2,500 mm, controller manufacturer: Self-developed brand, workpiece length (max.): 2,500 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, Key Product Features & Technical Parameters of KMB2500 Bending Center(Panel Bender)1. Core Product Features Bending Capacity - Fast bending: 0.2s per stroke, one-step forming - Universal dies for arc, hemming & multi-angle bending, cut mold & labor cost - Processes carbon steel, stainless steel, aluminum, film-covered sheets - Switchable edge/corner positioning for consistent precision; 3 processing modes (High Precision/Standard/Ultra-Fast) Mechanical Structure - Stress-relieved welded steel frame, higher rigidity & anti-resonance than cast frames - Press-arm feeding unit: 120m/min max feed speed, 1.9G acceleration - Hardened heavy-duty bending knives for long service life - Brush & ball worktable, auto lubrication, visual unbalanced load warning Intelligent Control - EtherCAT full closed-loop bus system, up to 64 axes, 2ms refresh, ±0.01mm accuracy - Auto angle/rotation compensation, die collision avoidance, offline simulation - IoT & cloud access, remote diagnosis & upgrade; reserved robot/production line interfaces - Simple graphic programming, low operator skill threshold Operation Merits - Full servo drive, low power consumption, low maintenance, ~55dB low noise 2. Technical Parameters -ower: 380V, average 7kW; Overall size: 6200×4500×2650mm - Max bending size: 2500×1250mm; Min thickness 0.3mm - Max thickness: 3mm steel/stainless steel, 4mm aluminum - Bend angle: -90°~90°(≤2.5mm steel), 0°~180°(≤2mm steel) - Max bend height 170mm, min arc radius 2mm - Min forming inner size customizable; Reducer backlash: 3 arcmin Hedpfsxu Uhvjx Ab Iont

Condition: new, Shaft diameter: 120roll diameter: 390motor power: 15length: 2000width: 1650heigth: 1900weight approx.: 4450 Standard Equipment • Steel construction frame • 3 rolls powered by hydromotor and planetary gearbox • Horizontal and vertical working position • Mobile control panel • Hardened standard rolls • Hardened and ground shafts made of high-tensile special steel • Digital read-outs (2 pcs) • 3-axis hydraulic lateral angle guide rolls • Two-speed working system • Hydraulic elements: Duplomatic (Italy) components used • Electrical equipment: Siemens (Germany) or Telemecanique (France) • Built according to EC safety directives (CE mark) and ISO 9000 certificate • User’s manual in English Options: - NC Unit 7 Screen EURO 7.500,-- Capacity Chart: NoProfile TypeSize Max Min. Dia.Notes1125x25 1200 Standard Rolls2200x50 1000 Standard Rolls365x65 750 Standard Rolls4Ø80 850 Optional Rolls5Ø5”x6,35 1500 Optional Rolls6Ø160x4 2800 Optional Rolls7120x40x4 1800 Optional Rolls890x5 1800 Optional Rolls9120x120x12 1200 Optional Rolls 10100x100x10 1200 Optional Rolls 11100x11 800 Standard Rolls12100x11 1000 Standard Rolls13100x11 800 Optional Rolls14UPN 220 1000Standard Rolls*15UPN 220 Hnodpfxey Hymqj Ab Ist 1200 Standard Rolls*16IPN 220 1000 Standard Rolls *17HEB 120HEA 14012001200Standard Rolls *18UPN 120 10000 Optional Rolls 19IPN 160 5000 Optional Rolls 20HEB 100HEA 12016004000Optional Rolls

Condition: like new (used), functionality: fully functional, Year of construction: 2018, Hydraulic combined punching machine + profile steel shear Manufacturer: Kaast Model: PS 45 Year of manufacture: 2018 Technical data Hodoy Alc Nopfx Ab Ient Make: Kaast Model: PS 45 Year: 2018 Punching force: 45 t Power: 4.0 kW Dimensions: approx. L 1.50 x W 0.80 x H 1.70 m Weight: approx. 1.20 t Equipment - Punching station - Steel shear - Square notching station - Central lubrication All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Mobea hand-operated profile and sheet metal shear Type/Model: Mubea 5SN/10R Condition: Used Technical data Sheet metal thickness max.: 10 mm Flat material: 80 x 13 mm Round material: up to 22 mm diameter Square material: 22 x 22 mm Weight: approx. 106 kg (including lever) Machine dimensions: approx. 1400 x 350 x 900 mm (including base frame) Hodpfxszhuv To Ab Ijnt

Condition: used, clear span: 3,300 mm, load per truss pair (max.): 695 kg, Technical data for the pallet racking crossbeam: Racking system: Link 51 Type: Boltless XL Hsdpfxsz A Aize Ab Ient Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Crossbeam type: B070XC Box profile: 70 x 40 mm Clear width: 3,300 mm Max. load per crossbeam pair: 695 kg with evenly distributed load 02x Locking pins, new Design: fully galvanized For securing the side supports to prevent unintentional lifting General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 2,700 mm, load per truss pair (max.): 4,250 kg, Technical data for the pallet racking crossbeam: Racking system: Bito Type: PRO Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Crossbeam type: PT150M Box profile: 150 x 50 mm Clip: 5 hooks Clear width: 2,700 mm Max. load per crossbeam pair: 4,250 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized Hnjdpfx Asz Ay Scsb Iet For securing the longitudinal beams To prevent unintentional lifting out General information about the item: This item is offered for collection only. Any further transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 3,600 mm, load per truss pair (max.): 3,300 kg, Technical data for the pallet racking crossbeam: Racking system: Bito Type: PL 38 Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: green Box profile: 142 x 50 mm Crossbeam type: PT36.142SN Clip: 3 HK (hooks) Clear width: 3,600 mm Maximum load per crossbeam pair: 3,300 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports Hodpfxsz Ayyas Ab Ijnt against unintentional lifting Note: 4-5 drill holes in the upper box profile General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 2,700 mm, Technical data for the pallet racking crossbar: Racking system: Bito Type: PL 38 Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: green Box profile: 127 x 50 mm Crossbar type: PT27.127LN Agraffe: 3 HK (hooks) Clear width: 2,700 mm Max. load per crossbar pair: 3,000 kg, with evenly distributed load 02x Locking pins, used Hsdpfoz Aydxjx Ab Isnt Design: fully galvanized For securing the longitudinal beams against unintentional lifting out Note: 4-5 drill holes in the upper box profile General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Hnsdpfx Abozbqqus Iet Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions Hsdpfxjw Dgi Tj Ab Isnt - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: used, functionality: unexamined, Ferwood Code: AGG0213 - Manufacturer Code: 2-056-10-0220 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 6KG - Dimensions: 36X26X21 - If interested, we offer an overhaul service; please contact us. Hsdoyztr Aepfx Ab Isnt

Condition: good (used), Year of construction: 2007, Gebruikte pons knipmachine van Peddinghaus Hjdpfszul Adjx Ab Ijnt Type Peddimaster 110/170 Capaciteit ponsen 110ton Capaciteit knippen 170ton Inclusief zij aanslag en diverse gereedschappen

Condition: used, Year of construction: 1990, Gebruikte ponsmachine van Kingsland Hodsyu Sqiepfx Ab Ient Type: 55 P 625 Capaciteit: 55 ton Keeldiepte: 625 mm Bouwjaar: 1990

Condition: used, Year of construction: 2014, tube diameter 60 mm Hjdpfx Aboivqrbo Ijnt wall strength 3 mm bending radius min. 2 x Rohr-Ø ÷ R200 mm 0 - 180 ° 2" (60.,3mm) mm stufenlos 0,5 - 2,0 1,5 kW 700 kg - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle

Condition: used, Year of construction: 1984, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Hedpfxegvkmno Ab Iont Electric 380 volt

Condition: used, Year of construction: 1985, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, Hnsdpfxjvg R Rze Ab Ijt angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt

Condition: used, puncher 70.0 t round bar steel 45.0 mm square edge steel 45.0 x 45.0 mm L-beam 150 x 150 x 13 mm hole punching press: capacity (dia. x thick.) Ø 27.0 x 20 mm shear: flat material 450 x 15 / 300 x 20 mm throat 300 mm work stroke 70.0 mm work height max. 1095 mm total power requirement 9.0 kW weight 1925 kg range L-W-H 1800 x 1200 x 2000 mm current new price approx. 25.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations * flat steel shears * profile steel shears * hole punch * notching station - driven by two hydraulic cylinders - stepless stroke adjustment - support table at hole punching & notching station - material stripper - side storage options - 2x freely movable foot switches Hnsdpjy Uy Sisfx Ab Iet - operating instructions (PDF)

Condition: ready for operation (used), punching pressure 45.0 t punch diameter 22 in 15.0 mm Hedoxaat Uspfx Ab Isnt punch diameter 38 in 8.0 mm round bar steel 30.0 mm square edge steel 25.0 L-beam 100 x 10.0 mm shear: flat material 300 x 12.0 mm adjustment of stroke 0 - 55 mm work height max. 940 / 1140 mm strokes per minute 34 punch diameter max. 110 mm voltage 400 V total power requirement 4.5 kW weight 1245 kg dimensions 1520 x 590 x 1700 mm In good condition (!!) New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: * Punching station * Flat steel shear * Angle/profile steel shear * Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector

Condition: new, pressure 60,0 t square edge steel 35,0 mm L-beam 120x120x12 mm round bar steel 40,0 mm punching cross-cut in cmm Ø28 in 15 / Ø38 in 11 mm throat 220 mm flat steel 200x20 / 300x15 mm blade length 317 mm oil volume 45,0 ltr. work height max. 940 / 1140 mm strokes per minute max. 26 work stroke 55,0 mm total power requirement 4,0 kW weight of the machine ca. 1425 kg. Dimensions (HxWxD) 1510 x 590 x 1570 mm Furnishing: - Support table at the hole punch - Support table on the square notcher Hsdpfx Abexcuxqs Ijnt - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder

Condition: used, Year of construction: 2000, Empty weight: 22.000 kg Working width: 1500mm Working length: 2160mm Hnsdpfx Aozrd Iaob Iot Max. thickness: 2mm With Supply-station infeed. - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12/50 - Drive system: CNC - Power [kW]: 18.0 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 1500 - Options: Loading system - Transport weight [kg]: 22000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, 3-roller bender Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm Hedpfx Asuluhwjb Ient

Condition: used, functionality: fully functional, USED PROFILE BENDING ROLL BENDER - SOMO SHAFTS UP TO 105mm. WEIGHT 5000 KG. Hsdpfxszh D T Is Ab Ient

Condition: excellent (used), Year of construction: 1988, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 370 mm, roller (top) diameter: 370 mm, side roll diameter: 280 mm, sheet thickness (max.): 20 mm, overall weight: 13,500 kg, total length: 6,900 mm, total width: 2,100 mm, total height: 2,100 mm, New ( 2026) Digital read out position side rolls Hydraulic drop end Minimum bending diameter 420 mm Full hydraulic machine Roll quality C60 900N/mm2 Rolling width: 3100mm Rolling thickness 3x toproll Ø:15mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 12mm Top Roll Ø: 370mm Bottom Roll Ø: 370mm Side roll Ø: 280mm Number of rolls: 4 Hjdpszxxgwjfx Ab Isnt Rolling speed: 0 - 4 Adjustiment lower roll: 0 - 700mm/min. Adjustment side rolls: 0 - 200mm/min. Number of driven rolls: 2 Power: 15kW Length: 6900mm Width: 2100mm Height: 2100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!