Used Schön Ute/B 50 for sale (63,977)

Condition: new, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Pedpfx Alezlivpewegt Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: ready for operation (used), * Brand: Jöst * Model: vibrating chute * Type: FUF Pgjdeywmnvjpfx Alwst * Dim.: length 3500 mm - width 1300 mm * with: two pieces vibration motors of each 2,2 kW

Condition: ready for operation (used), * Brand: Cyrus * Mode: vibrating chute * Length: 3500 mm - width 1300 mm * incl.: two pieces vibration motors of each 4 kW Psdpfeywnbksx Alwsgt

Condition: ready for operation (used), * Brand: Jöst * Model: vibrating chute Pgsdpfx Alsywmf Ujwet * Type: FUF * Dim.: Length 3500 mm - width 500 mm * With: two pieces vibration motors of each 1 kW

Condition: used, Year of construction: 2001, travel -x axis 1800 mm travel -y axis 520 mm travel -z axis 520 mm tool taper SK 40 table load 3 t tool piece magazine with 30 Plätze spindle drive 22 kW max. torque on the spindle 220 Nm *Machine in very good condition* + Loading door windows have been replaced + Linear guide carriages on X and Y axes have been replaced - Heidenhain iTNC 426-M control system - Partition wall for pendulum operation - Chip conveyor - Filter system Pgodjvh R Txopfx Alwet - Spindle up to 8000 rpm - Rapid traverse x/y/z: 30/30/30 m/min - Year of manufacture 2001 Control on: 93212:52:14 Machine on: 82284:39:36 Program run: 42385:36:11

Condition: ready for operation (used), * Brand: Jöst * Model: vibrating chute * Dim.: length 1500 mm - width 800 mm * Driving: two pieces vibration motors of each 1,2 kW. Pgjdpfx Aloywmucjwjt * On stock: 2 pieces.

Condition: ready for operation (used), * Brand: Hazemag * Model: vibrating chute * Dim.: length 6000 mm - width 1150 mm * incl.: steel construction. Psdpfsywnayex Alwsgt * Driving : 22 kW E-motor.

Condition: used, Fire extinguisher, foam extinguisher, foam fire extinguisher, fire truck -Manufacturer: Jockel, foam extinguisher, mobile foam fire extinguisher -Type: S 50 J Externa Bio -Content: 50 liters -Fire classes: A and B Podpfx Aljrzvw Eswogt -Technical data/test label: see photos -Number: 2x fire extinguishers available -Price per piece -Dimensions: 550/440/H1100mm / 600/450/H1110mm -Weight: 87 kg/pc.

Condition: used, Year of construction: 2000, Robopac ROBOTAPE 50 M is a band wrapping machine manufactured by Robopac in 2000, with a format of 500 x 500 mm. Currently stored in Germany, it can handle a maximum carton weight of 50 kg and is in good condition without any damages. The delivery terms are FCA. Format: 500 x 500 mm Pjdpfowvut Dsx Alwjgt Equipment: Tape winding machine Max. Carton weight kg 50 Good condition without any damage

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 4,500 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2012. This HWACHEON CUTEX 160 B VDI features a swing over bed of 550 mm and a maximum spindle speed of 4500 rpm. It offers travels of 170 mm in the X-axis and 335 mm in the Z-axis, along with 12 tool positions. If you are looking to get high-quality turning capabilities, consider the HWACHEON CUTEX 160 B VDI machine we have for sale. Contact us for further details. • Swing over bed 550 mm • Maximum spindle speed 4500 rpm • Travels x-170 mm, z-335 mm • 12 tool positions Technical Specification Pgodpfx Ajzwxz Sjlwst Counter Spindle No Driven Tools Yes

Condition: excellent (used), functionality: fully functional, Coil weight 350 kg Max. strip width 200 mm 11-roller straightening unit Roller diameter 60 mm 2 feed rollers Pgedszycq Aepfx Alwet 2 exit rollers

Condition: ready for operation (used), * Brand: Haver & Böcker * Model: vibrating chute * Dim.: length 1750 mm - width 1250 mm Pgsdpfx Aljywmiaewet * with: two pieces vibration motors of each 1,4 kW * Incl.: springs.

Condition: ready for operation (used), * Brand: Jöst * Model: vibrating chute * Type: FUF Pjdpfx Aloywmqwewjgt * Dim.: length 4500 mm - width 1400 mm * with: two pieces vibration motors of each 9,5 kW

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Pgsdpfx Aew D E A Ejlwet

Year of construction: 1986, condition: ready for operation (used), A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible. Pgedpfsxxziusx Alwjt

Condition: used, Year of construction: 1998, x-travel 1.020 mm y-travel 510 mm z-travel 510 mm control MSC 501 Fanuc table surface area (APC) 1.200 x 480 mm max. table load (APC) 550 kg turning speed range - milling 10.000 U/min power capacity - milling spindle 22 / 18,5 kW tool taper BT 40 number of toolpositions 30 pos. tool taper BT 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse 32 m/min feed 1 ~ 16.000 mm/min Tipp feed 0 ~ 1.260 mm/min spindle bearing diameter 85 mm total power requirement 59,5 kVA weight of the machine ca. 6,9 t dimensions of the machine ca. 3,9 x 2,7 x 2,9 m CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 Pgedpfx Aljy Apcyowet - Clamping devices are NOT included in the scope of delivery

Condition: good (used), Year of construction: 1982, machine/vehicle number: 340, Offer 25032 Technical data: - Drilling capacity in steel ST 60: 50 mm - Maximum drilling capacity in steel ST 60: 65 mm Podpfxoyk Dp Ns Alwsgt - Thread cutting device up to: M 60 - Drill spindle taper: MK 5 - Drill spindle stroke: 240 mm - Throat depth: 400 mm - Table with 2 T-slots: 720 x 560 mm - Max. distance table – drill spindle approx.: 850 mm - 4 feeds: 0.1 - 0.2 - 0.3 – 0.4 mm/rev - Feed gearbox infinitely variable with change gearbox - Spindle speeds infinitely variable: 40 - 1,600 rpm - Drive: 400 V / 5.5 kW - Space requirement approx.: W 850 x H 2,480 x D 1,350 mm - Weight approx.: 1,450 kg

Condition: good (used), power: 5.5 kW (7.48 HP), For sale is a robust combined jointer and thicknesser, SCM Type 2250. The machine impresses with its heavy-duty, solid construction, a planing width of 500 mm, and long jointer tables. The fold-up jointer tables allow for quick switching between jointing and thicknessing. Technical data: +Manufacturer: SCM +Type: 2250 +Planing width: approx. 500 mm +Total length of jointer tables: approx. 2,200 mm +Maximum thicknessing height: approx. 235 mm +Minimum thicknessing height: approx. 3 mm +Maximum material removal in thicknessing: approx. 8 mm +4-knife cutterhead +Cutterhead speed: approx. 4,500–5,000 rpm Pjdjzz Nt Hspfx Alwogt +Motor power: 5.5 kW +Two feed speeds: approx. 7.5 and 15 m/min +Fold-up jointer tables +Swiveling fence +Automatic workpiece feed in thicknessing +Dust extraction connection: 150 mm +Weight: approx. 890 kg +Space requirement: approx. 2,200 × 1,350 × 1,100 mm Scope of supply: +Operating manual +Parts list +Setting gauge +Replacement knives The machine is in used condition. Inspection and a test run are possible by prior appointment. Loading and transport can be arranged upon request. Location: 39340 Haldensleben Price: €4,350 net

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Custom conversion upon request! - Tmax 160°C - Vertical lift door - Internal dimensions (L x W x H): 3300 x 2500 x 1150 mm - Controller: JUMO IMAGO - Air management: 6 fans, 6000 m³/h per fan Pjdpfx Aljxd A N Tswjgt - Net weight: 3000 kg - Connected load: 65 kW - Connection: 400V 50Hz-3/N/PE 100A/phase Oven, ovens, industrial oven, preheating oven, drying oven, hardening oven

Condition: used, Year of construction: 1991, Used capping machine BERTOLASO Aluminium screw up to 1200 bph Pgjdjvgva Ispfx Alwjt The Bertolaso aluminium capper clearly meets the needs of bottling with aluminum caps. Moreover, technicians overhauled this model in 2008 and adapted it for Stelvin capping, thereby ensuring reliability and versatility. Technical specifications The machine effectively uses one capping head to operate with aluminum screw caps. Furthermore, the system performs a clockwise rotational movement to ensure a uniform and precise capping process. Consequently, it processes 1200 bottles per hour, making it an ideal solution for small and medium productions. The compact dimensions of the machine, measuring 1200 mm in length, 900 mm in width, and 1200 mm in height, therefore enable easy integration into existing production lines. Additionally, its weight of 0 kg provides a stable and durable structure suitable for intensive use. Safety and maintenance Integrated safety features undoubtedly protect operators during use. Thus, these systems keep the machine compliant with modern industrial safety standards. Besides, the modular design and availability of original Bertolaso components simplify regular maintenance. Efficiency and adaptability This machine, ready for use, optimizes production times while maintaining a high level of capping precision. Moreover, the adaptation for Stelvin caps satisfies current market demands and, as a result, offers greater flexibility compared to the original model. Applications The Bertolaso screw capping machine efficiently serves various industrial sectors, including wine, food, and beverage industries. Consequently, its versatility and high performance provide an optimal choice for companies requiring a reliable and efficient machine for aluminum cap closures. Conclusion The VB 40 V 22 model delivers robustness, efficiency, and safety. Furthermore, it caps 1200 bottles per hour and adapts for Stelvin capping, thus making it a highly competitive solution for companies of various sizes. Consequently, Bertolaso reliability and compliance with safety standards make this machine a valuable investment in the bottling sector.

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm Pgodpfx Aljzrpu Sjwet coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, Charger Pgedpoyvcm Dofx Alwjt

Year of construction: 2005, condition: excellent (used), Description New blades and counterblades with suction HS-40/SL-SP Specifications Manufacturer TRIA Model BM 50-30 Pgjdjzwwdxspfx Alwet Year 2005 Condition Used Stock Number AI2182

Condition: refurbished (used), Bezner screening machine | roller screen type BSM 50-1x2/4,75 reconditioned | refurbished with new bearings (roller bearings), new vibrating elements and a refurbished screen box Make: Bezner Type: BSM 50-1x2/4.75 Screening capacity: up to approx. 60–70 srm/h (for wood chips and sawdust) Screening area: 4.75 m² per screen mesh size Screen decks: 2 Fractions: 3 Screen mesh size: - 1st screen deck: punched perforated sheet metal screen, D = 40 mm - 2nd screen deck: punched perforated sheet metal screen, D = 10 mm or as agreed Drive power: 4.0 kW, 3 x 400 V, 50 Hz Screen box height: 700 mm L x W x H: 5,600 x 2,300 x 2,050 mm Machine weight: approx. 4,800 kg Pedpfxsz Drr Ie Alwjgt Machine colour: RAL 6011 Reseda green Screen inserts freely selectable Outlet design according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: repair required (used), functionality: not functional, Pictures show : 2-spindle drilling head , pneumatic clamping device , hydraulic feed device . Technical data : Continuous drilling capacity 50 mm Normal drilling capacity 65 mm Spindle motor , pole-switchable 3 / 5 kW 4 infinitely variable speed ranges Gear stage 1 50 - 375 and 100 - 750 rpm Gear stage 2 100 - 750 and 200 - 1500 rpm Distance from spindle nose to table approx. 800 mm Spindle stroke 200 mm Column diameter 160 mm Pjdpfx Aoz Ad N Ejlwogt Projection 325 mm Entire table 650 x 500 mm Height approx. 2.1 m Normal weight approx. 0.7 to . Equipment and scope of delivery : - Table clamping from the front - Coolant device - Electric cabinet - without table height adjustment - Hydraulic feed device - the hydraulic unit is missing ! (drill feed can be operated manually via a cross lever)