Used Schaerer Center Lathe for sale (17,224)

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 86980 € 1643.92 € 860 mm 3000 mm 430 mm 132 mm 620 mm 560 mm 11 140 MK 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 - 2/3 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 3470 mm 1700 mm 1730 mm 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center Dcodpfx Anewiq Rxeqei four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 72870,00 turning length2.000 mm € 75900,00 turning length4.000 mm € 93390,00 turning length5.000 mm € 106 160,00 turning length6.000 mm € 120230,00

Condition: new, neu Bulgarien 81780 € 15.64 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm Dcsdswiq Rrjpfx Anqei 11 140 MK 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 67770,00 turning length2.000 mm € 70700,00 turning length4.000 mm € 88290,00 turning length5.000 mm € 101060,00 turning length6.000 mm € 115130,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 46970 € 897.13 € 500 mm 1500 mm 250 mm 80 mm 0 mm 400 mm 8 80 MK 21 20-2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4" Gänge/" 240 - 1 315 mm 1 mm 90 mm 5 MK 2 mm 7.5 kW 3100 mm 1250 mm 1400 mm 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position Dodpfx Anowiq Rfsqjci coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 45610,00 turning length2.000 mm € 49010,00 turning length3.000 mm € 53450,00 turning length4.000 mm € 59360,00 turning length5.000 mm € 74840,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 113720 € 2149.31 € 800 mm 2000 mm 400 mm 3 mm 560 mm 560 mm 318 MK 12 Dcodpfxjwiq E Aj Anqji 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 138800 € 2623.32 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 MK 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm 270 mm 105 mm 6 MK 225 mm 18.5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Dsdpfx Anjwiq Dreqoci Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, Year of construction: 2025, neu 2025 010105 prompt, Zwischenverkauf v Bulgarien 50210 € 948.97 € 1 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm Djdpfx Aswiqz Donqjci 8 90 MK 21 20 - 2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 7.5 kW 3600 mm 1250 mm 1400 mm 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS (PRICES ON REQUEST): turning length 1.000 mm turning length 1.500 mm turning length 3.000 mm turning length 4.000 mm turning length 5.000 mm

Condition: new, neu Bulgarien 128710 € 2432.62 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm Dcedpfjwiqwfjx Anqoi 15 160 MK 5 - 1000 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 685 mm 270 mm 125 mm 6 MK 260 mm 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 113860,00 turning length 2.000 mm € 118510,00 turning length4.000 mm € 137250,00 turning length5.000 mm € 148550,00 turning length6.000 mm € 165640,00

Condition: new, neu Bulgarien 121770 € 2301.45 € 1090 mm 3000 mm 500 mm 155 mm 690 mm 700 mm 15 160 MK 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS turning length1.500 mm € 107020,00 turning length2.000 mm Dcsdpfx Ajwiqv Usnqei € 110650,00 turning length4.000 mm € 130410,00 turning length5.000 mm € 141610,00 turning length6.000 mm € 158700,00

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min Dedjzfnd Sopfx Anqeci diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: ready for operation (used), Year of construction: 1969, Poreba lathe TR100B x3000 Dcodpfx Anszdklvoqsi Distance between centers: 3000 mm Diameter above the bed: 1000 mm Diameter above the cross slide: 630 mm Maximum workpiece weight: 12000 kg Spindle bore: 120 mm Spindle motor power: 27 kW 2 tool posts, digital read-out (DRO) Weight: approximately 15 tons.

Condition: used, Year of construction: 1986, Available immediately from a workshop for disabled workers: L & Z lathe, Imatec Type ID 175 Year of manufacture: 1986 Center height: 175 mm Diameter over bed: 350 mm Diameter over carriage: 210 mm Distance between centers: 1000 mm Spindle bore: 41 mm Spindle speeds: 35.5 – 1600 rpm Digital display Chuck Faceplate Multifix system with holders Coolant system Djdpfx Anjzi Hq Esqeci Drive power: 3 kW Weight: 1700 kg Price: EUR 2,250.00 plus VAT, ex works.

Condition: used, Year of construction: 1981, Immediately available from a workshop for disabled workers: L & Z lathe VDF Type D 480 / 1000 Year of manufacture 1981 Center height 240 mm Diameter over bed 480 mm Diameter over cross slide 320 mm Spindle bore 60 mm Dsdpfxezi Hqxe Anqsci Distance between centers 1000 mm Spindle speeds 11.2 - 2240 rpm Drive power 7.5 kW Digital display Chuck Tool holder Coolant system Weight 2.5 tons

Condition: used, Used 2-meter lathe by Cazeneuve Type: HB 500 Swinging diameter over bed: 460 mm Turning length: 2000 mm Digital readout, 2 axes Dcsdpfx Anjzgcltjqji

Condition: used, Year of construction: 2011, Technical details: turning diameter over bed: 1090 mm turning diameter over support: 690 mm turning length: 1100 mm centre distance: 6000 mm turning dia. in gap: 1250 mm centre height: 500 mm Dodpfx Anozdkz Djqjci spindle passage: 152 mm range of revolution per miute: 6,3 - 1250 U/min face slide travel: 525 mm tailstock quill taper MT: MK 6 tailstock quill adjustment:: 260 mm cross feed: 0,016 - 19,45 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U number of feeds: 160 spindle bore: 155 mm total power requirement: 30 kW weight of the machine ca.: 10,65 t dimension machine xH: 8,3 x 2,0 x 1,90 m

Condition: used, CNC turning machine MONFORTS, type RNC 300 MultiTurn with driven tools and Y-axis Year of manufacture 2005 CNC control system FANUC Series 18i-TB Maximum turning diameter over the bed cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps Dodpfxszfau Aj Anqoci - with tailstock, chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - Collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 driven tools with collet ER 25 - Chip conveyor with integrated coolant system - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: excellent (used), Year of construction: 2001, LZ lathe, manufacturer GDW, type: LZ 360 S, year of manufacture 2001 with 3-axis digital display, Heidenhain, chuck 160 mm Röhm, LED machine light, coolant system, tool holder Multifix - B with 2 tool pockets, tailstock mount MK3, center punch, machine documentation. Center height: 175 mm Dsdpszfwtpsfx Anqeci Distance between centers: 800 mm Spindle bore: 43 mm Spindle speeds: High range: 30-750 rpm / Low range: 150-3000 rpm Machine is in very good condition, guideways are in very good condition. See photos of the test run. Space requirement: 2050 x 1000 mm, height 1400 mm, weight approx. 1000 kg. Further data can be found on the machine data sheet.

Condition: used, Year of construction: 1979, turning diameter over bed 670 mm turning diameter over slide rest 420 mm turning length 2200 mm turning speeds 7,1 - 1400 U/min centre height 340 mm spindle bore 130 mm total power requirement 22,0 KW weight of the machine ca. 5,2 t dimensions of the machine ca. 4,75 x 1,8 x 1,7 m Centre lathe - Forkardt F400 3-jaw chuck - Feed on top slide - Coolant system - Multifix tool post - 4 Multifix tool holders - Rapid traverse - Steady rest - Machine light - Live centre - 2 chip trays - Chip guard Dedpfx Anjzkbm Dsqjci

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg Dcodozd Tycopfx Anqei >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: used, Year of manufacture: 1980s/90s Technical data: Centre height: 185 mm Centre distance: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Dcjdpsydk Hhefx Anqji Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders - Bed stop - Chip tray

Condition: good (used), Diameter over bed: 500 mm Diameter over carriage: 270 mm Diameter of swing over cross slide: 700 mm Distance between centers: 1500 mm Dcodpfozf Nd Hsx Anqsi Diameter of tailstock spindle housing: 70 mm Travel of tailstock spindle: 180 mm Travel of cross slide: 300 mm Maximum workpiece weight: 300 kg Total power: 6.6 kVA Machine weight: 1760 kg

Condition: good (used), turning diameter over bed 380 mm turning diameter over slide rest 250 mm turning length 600 mm turning speeds 90 - 1600 U/min centre height 200 mm Dcsdpfx Anszd Hf Soqji total power requirement 4,2 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2,2 x 0,9 x 1,6 m

Condition: good (used), turning diameter over cross slide: 350 mm, spindle bore: 50 mm, turning diameter: 600 mm, center height: 1,000 mm, Behringer lathe with a wide range of accessories. Dcsdpjzg Aywsfx Anqei

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 260 mm, spindle bore: 52 mm, turning diameter over bed slide: 450 mm, turning length: 1,150 mm, rotational speed (max.): 2,300 rpm, overall weight: 1,000 kg, Equipment: rotational speed infinitely variable, Well-maintained and fully functional machine, equipped with a 3-jaw chuck, 200 mm in diameter (Forkhart), a 4-jaw chuck, 320 mm in diameter, a quick-change tool holder (Multi Fix), a cooling system, and a digital display with constant cutting speed. Dcedpfjzkb Sgsx Anqei

Condition: ready for operation (used), Year of construction: 1976, Universal screw-cutting lathe RYAZAN 165 – 2 units available. Specifications: Max. workpiece diameter: - Above the bed: 1000 mm - Above the support: 600 mm Max. workpiece length: 3000 mm Max. workpiece weight: 5000 kg Diameter of a cylindrical aperture in the spindle (minimum): 85 mm Spindle end according to GOST 12595-72: 1-15M Cutting tool height: 50 mm Number of spindle speeds: 24 Spindle speed: 5-500 rpm Number of feed rates: 32 Feed rates: - Longitudinal: 0.20-3.05 mm/rev - Cross: 0.07-1.04 mm/rev Maximum cutting force supported by the feed mechanism: - Longitudinal: 1200 kg Dodpfx Aezcxukenqoci - Transverse: 780 kg Pitch of a cutting groove: - Metric: 1-120 mm - Modular module: 0.5-30 - Inch: 28-1/4 threads/inch Machine weight: 12500 kg

Condition: ready for operation (used), Year of construction: 1987, Immediately available ex-works: L & Z lathe, Poreba Type TR 115 Year of manufacture 1987 Swing over bed 1150 mm Distance between centers 5000 mm Swing over cross slide 780 mm Spindle bore 110 mm Drive power 22 kW Spindle speeds 16 – 1250 rpm Digital display Multifix tool holder with many holders Faceplate Various boring bars Lynette Weight 14 tons Dedpfxezikawj Anqsci Price: EUR 17,000.00 plus VAT, ex-works.