Used Soco System T-10 for sale (96,149)

Year of construction: 1979, condition: used, Control box, control unit, pneumatic control Ksdjix Ay Eepfx Ahasdl -Manufacturer: Festo, pneumatic control system 1000 -Control no.: 3051 9 -Inlet pressure: max. 14 bar -Operating pressure: 4 - 6 bar -Dimension: 490/410/H945 mm -Weight: 56 kg

Condition: used, Year of construction: 2002, machine/vehicle number: 10857, Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Kjdpfx Asvmfzbehaodl Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm Automation

Condition: used, functionality: fully functional, Agilent 6510 System + PC & Software. The set includes: -Agilent 6510 Q-TOF LC/MS -Agilent 1260 Infinity G1376A Capillary Pump -Agilent 1200 Series G1377A Micro Well Plate Autosampler -Agilent 1200 Series G1379B Micro Vacuum HPLC Degasser -PC & Software The Agilent 6510 Quadrupole Time-of-Flight LC/MS delivers unsurpassed Q-TOF sensitivity in a compact, bench-top design. With the 6510’s tenfold sensitivity advantage, you detect critical, low-level components that are out of reach of other Q-TOF instruments. At the same time, fast data acquisition means you can acquire one MS and five MS/MS spectra per second, for higher-quality data and more structural information from complex samples. And ultralow-ppm mass accuracy maximizes confidence in your results. Features: Kodet T T Tnopfx Ahaodl -Attomole-level sensitivity – Sensitivity unequaled by any Q-TOF on the market today enables the 6510 to detect more low-abundance components. -Better than 3-ppm mass accuracy – Outstanding mass accuracy, typically 1-2 ppm, rivals FTMS instruments and increases specificity and confidence in results. -Wide in-spectrum dynamic range – 3-4 orders of magnitude in-spectrum dynamic range enables identification of less-abundant compounds in the presence of more-abundant compounds and makes overall operation easier. -Fast MS and MS/MS acquisition – Fast spectral acquisition improves the identification of unresolved components in complex samples and makes the 6510 compatible with the latest fast chromatography. -Multiple ion source options- The best selection of ion sources in the LC/MS industry-including the revolutionary HPLC-Chip/MS and multimode ESI/APCI sources-allow the 6510 Q-TOF to address a wide range of LC/MS applications Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Sieb & Meyer 26.44.0010.3 Brushless Motor System, used, normal signs of use, 100% functional, scope of delivery as per photos Kdsdpfx Ahei Ec Uzsajl

Condition: ready for operation (used), Sieb & Meyer 26.44.0010.5 Brushless Motor System, used, normal signs of use, 100% functional, scope of delivery as per photos Kedpfx Asi Ec U Ejhaodl

Condition: ready for operation (used), Siemens 6FX1113-0AA00 Sinumerik System 8 SM100 CPU Vers F used 100 % functional Kdsdpfx Ahoi Ed Izsajl

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Kdodpei Hn Srsfx Ahajl Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: ready for operation (used), Keyence CA-E100T Vision System SN:BA710081, used, in good condition, 100% fully functional, scope of delivery as per photos Kdsdpfxex Et Acj Ahael

Condition: ready for operation (used), Keyence CA-E100T Vision System SN:BA710085, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Ksdpfx Ajx Et Aiehaodl

Condition: as good as new (ex-display), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, warranty duration: 12 months, total height: 3,650 mm, type of input current: AC, total width: 2,200 mm, total length: 3,350 mm, overall weight: 6,100 kg, input voltage: 230 V, table load: 2,500 kg, We are selling our test and demonstration machine from our Solution Center. Further machines are available. Please feel free to contact us. Mitutoyo | CRYSTA Apex 122010 Coordinate Measuring Machine Coordinate measuring machine equipped with the latest Renishaw 5-axis technology, year of manufacture 2018. Kdjdpfeyibp Ujx Ahael Measuring range XYZ: 1200 x 2000 x 1000 mm Dimensions (XYZ): 2200 x 3350 x 3650 mm Max. workpiece weight: 2,500 kg Measurement uncertainty MPE (E0): 2.3 + 3.0 x L/1000 in µm Equipment: • Renishaw UCC S5 controller, SPA3 servo amplifier, MCU5-2 joystick, I++ server • Temperature compensation with workpiece sensor • Active damping • Renishaw REVO 5-axis measuring system for single-point and scanning, incl. RSP2, 1x RSH175, 2x RSH250, and RSP3-3 kit (3xSH) including all probe changers • Modus measurement software, latest version with STEP CAD import, including 1 year software maintenance • PC system with Windows 11, 2 x 27" TFT monitors NEW, including height-adjustable desk • Control cabinet with current safety technology • Base plate M6 (loading drawer optional - see pictures) Original price in 2018 plus VAT: €245,640.00 Machine sales and service only available within Germany! Optional service package available: Delivery to site (free to kerbside) | Commissioning | Inspection | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and accessories available upon request

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 101258050, Submission of a bid constitutes an obligation for timely collection no later than 31/12/2025! The offer includes: Bacciottini Pit Stop WFD2H Speed (Serial number: WFD2H 1010, Year of manufacture: 2010) MB PFNET 52/4-40-ART52 (Serial number: 101258050) TECHNICAL DETAILS Number of pockets: 4 EQUIPMENT Kdedpfx Ajxyh E Sshasl 2-bar scoring system Inline Extended feeder MB folding machine Gatefold pocket Delivery

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Air valves Injection for mold parting Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Kodoy Smgzjpfx Ahaedl Machine workstation protection with safety package Dimensions: Weight: 350 kg Length/width/height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2005, operating hours: 34,131 h, functionality: fully functional, machine/vehicle number: 592, total length: 3,500 mm, total width: 4,000 mm, total height: 3,200 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2023, working width: 1,000 mm, working height: 750 mm, working length: 1,500 mm, Huber & Grimme P-T-F 15-10 – 5-Axis CNC Milling Machine with Full Enclosure: Working dimensions: 2x1500x1000x750 mm Machine & Equipment: -Huber & Grimme P-T-F 15-10 -Linear screw drive for all axis -Year of manufacture: 2005 -5 controlled axes 8 kW high-frequency spindle -Automatic tool changer -Siemens 840D -Servo drives on all axes -400 V / 50 Hz electrical system -Spindle type: HF 100 A 45 CKPV Included in the sale: -Full machine enclosure -Electrical control cabinet -Cooling unit and vacuum system (as shown) Applications: -Aluminium, plastics, composites, wood -Model and mould making Kdsdpox Iffbjfx Ahael Machine is sold as a complete unit, including enclosure and electrical system, as shown in photos. Inspection possible by appointment.

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 940 mm, 20 lashing rings each rated at 6 t, 20 lashing brackets each rated at 6 t, 18 lashing holes, 7 central stake pockets, 14 stake pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, removable Price: €1,500, surcharge for extendable drawbar Price: €1,500, surcharge for 4 warning signs with lighting Price: €800. Also available with loading platform lengths of 8,600 mm, 9,000 mm, or 10,500 mm! -- Subject to misprints, errors, and changes, sample images -- For more data, see: !, More details: ! Kedpfxjy Sttuo Ahaedl

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Kjdpfx Ahjy S Ru Asajdl Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, empty load weight: 50,800 kg, year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Kjdpey S Rruefx Ahaodl Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: new, empty load weight: 3,650 kg, maximum load weight: 6,350 kg, overall weight: 10,000 kg, axle configuration: 2 axles, loading space length: 6,250 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 37 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Dautel DL 1500 tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 6 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ per month, , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Kdsdsy Rybvspfx Ahaol

Condition: like new (used), Year of construction: 2024, operating hours: 359 h, functionality: fully functional, machine/vehicle number: 1384 - 10024378, overall weight: 295 kg, total length: 1,090 mm, total width: 630 mm, total height: 1,100 mm, motor manufacturer: Super Premium Efficiency IE4, IP55, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 56.4 m³/h, operating pressure: 7 bar, pressure (min.): 7 bar, pressure (max.): 8 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 62 dB, protection type (IP code): IP54, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a Kaeser Aircenter SM 10 screw compressor in very well-maintained condition with low operating hours. The unit is a compact, ready-to-use compressed air station featuring an integrated refrigeration dryer (ABT15) and an oil separator with pressure gauge, making it ideal for industrial applications and workshops. The system received its initial and scheduled maintenance in December 2025. All documentation and paperwork are available. The compressor is immediately operational and can be inspected under power by arrangement. Kodpfx Aeyvkamshajdl

Condition: good (used), Year of construction: 1972, Adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, compensating traverse -Manufacturer: VEB, compensating traverse for transporting different loads -Type: TV 10-6 -Loading capacity: 10 t -Transport dimensions: 6175/375/H900 mm Kedpfx Asy D Hqwohajdl -Empty weight: 490 kg

Condition: good (used), Year of construction: 1996, Adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, compensating traverse Kdjdjy D Hpaspfx Ahaol -Manufacturer: Korrmann, compensating traverse for transporting different loads -Type: TRV 10-5 -Loading capacity: 10 t -Transport dimensions: 5400/360/H840 mm -Empty weight: 580 kg

Condition: good (used), Year of construction: 1997, Adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, compensating traverse Kdedpfjy D Hk Rjx Ahaol -Manufacturer: LHS load handling equipment, compensating spreader beam for transporting different loads -Type: TIV 10-6 -Loading capacity: 10 t -Transport dimensions: 6030/410/H930 mm -Empty weight: 720 kg

Condition: excellent (used), KUKA Industrial Robot Complete System Type: KR 10 R900 sixx / KRC4 For sale is a KUKA industrial robot complete system from a commercial environment, consisting of the robot arm, controller, smartPAD, cable set, and additional accessories as depicted in the photos. This system is suitable for a wide range of automation tasks, especially in industrial production, assembly, laboratories, material handling, pick-and-place operations, inspection tasks, and general robotic applications. The 6-axis robot is designed for precise and rapid motion sequences and can be used for gripping, positioning, feeding, moving, and processing components. System components: - KUKA KR 10 R900 sixx robotic arm - KUKA KRC4 controller - KUKA smartPAD - Connection and interface cables - Additional accessories as shown in the photos Technical data of the robot: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article no.: 10016515 Serial no.: 500877 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Technical data of the controller: Controller: KRC4 Article no.: 11019802 Serial no.: 224374 Controller weight: 33 kg Input voltage: 1 x 230 V Line frequency: 50/60 Hz Full load current: 12 A Line fuse: 16 A System information / Software status as displayed: KRC SR Version: V8.2.3 HMI Version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options as displayed: - ExpertTech 3.1.1 - Gripper & SpotTech 3.0.5 - OrangeApps.MqttClient 2.2.12 - Profinet KRC-Nexxt 2.2.7 Kedey D Hd Repfx Ahajdl - RemoteService 1.0.2 - UserTech 3.1.4 Dimensions / Weight: Total system weight including controller and accessories: approx. 90–110 kg Robot dimensions: Reach 901 mm Controller dimensions: compact KRC4 version Condition: Used, from ongoing commercial operation. Visual condition with typical signs of use. The screen and system information are visible in the photos. For the external condition, please refer to the images. Scope of delivery: The images are decisive for the exact scope of delivery. The table shown in the photos is not included in the sale. Please note: Commercial sale. Subject to changes, errors, and prior sale. All technical information provided to the best of our knowledge, but without guarantee. We are happy to answer further questions by phone.

Condition: excellent (used), Manufacturer: KUKA Model: KR 10 R900 sixx Controller: KRC4 Description For sale is a KUKA industrial robot as a complete system, comprising the robot arm, KRC4 controller, smartPAD, as well as connection cables and accessories. The system is suitable for a wide range of automation tasks in industrial production, such as handling, pick-and-place, assembly, feeding, positioning, or inspection processes. This 6-axis robot enables precise and fast motion sequences and is particularly well-suited for compact workspaces and automated production cells. Technical Data Robot Type: KR 10 R900 sixx Item No.: 10016515 Serial No.: 500874 Year of manufacture: 07/2013 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: approx. 52 kg Controller: KRC4 Item No.: 11019802 Serial No.: 224377 Year of manufacture: 2013 Controller weight: approx. 33 kg Supply voltage: 1 x 230 V Frequency: 50/60 Hz Full load current: 12 A Fuse protection: 16 A Total system weight (approx.): 90 – 110 kg Software / System KRC SR Version: V8.2.3 HMI Version: 8.2.0.4 B22 KSS: 8.2.21_SR Installed options: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Ksdpfx Ahsy Dt D Doaodl Condition Used Visually, with normal signs of use System data and status as shown in the pictures Scope of Delivery KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and interface cables Accessories as shown in the images Additional Information Inspection possible by appointment Loading / shipping by freight carrier possible Commercial sale

Condition: new, Year of construction: 2026, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Ksdjy Drhujpfx Ahaedl Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Condition: new, Year of construction: 2026, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Kedpfx Ahoy Drc Seaodl Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.