Used Steinbock Boss B1206 for sale (135)

Year of construction: 1979, condition: used, machine/vehicle number: 21143-7331, lifting capacity: 1000 kg stroke: 2800 mm fork length: 1120 mm weight: 420 kg Guedpfx Ajb Nwc Heg Sjh dimension: 900 x 1700 x 1960 mm

Condition: ready for operation (used), One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: approx. 250stitches/min. Inspection possible by prior arrangement. Gedpfxezk Nb Ao Ag Sjuh

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,350 mm, outer diameter: 1,750 mm, overall weight: 1,250 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Gusdpfx Agezht Sme Seh Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell OD: 1,750mm. Overall Height: 3,350mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 1,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19693. Factory Tested: November 2020. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and spray fitting, pressure relief valve connection, nitrogen blanketing connection, Endress & Hauser thermowell pocket, lifting lugs, and earthing boss. Seven units currently available both with and without an agitator fitted. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 15,000 l, usable tank capacity: 15,000 l, total height: 3,875 mm, outer diameter: 1,750 mm, overall weight: 2,900 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Godpfezhn Ngox Ag Sjuh Material: 316L Stainless Steel throughout. Working Volume: 15,000 Litres. Shell ID: 2,930mm. Overall Height: 3,875mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 2,900kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19635-3. Factory Tested: September 2020. Nozzles and fittings include 610mm hinged manway, CIP inlets with dip pipe and TOD clip-on spray fittings, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, flush polished level switch, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. . Please contact us for further information or to discuss delivery and installation options.

Condition: excellent (used), Year of construction: 2000, 1 Muratec MT12 CNC lathe with dual spindle and dual turret 4 axes Supplied with all tooling and tool holders Year: 2000 1 BOSS 542 CNC indexing head Godpjy Ta Nfefx Ag Ssuh /32

Condition: good (used), functionality: fully functional, 1 x Multi-spindle lathe Traub TD 26 with loading magazine Iemca Boss 432/32 Year of manufacture: 2002 + Chip conveyor GS Industrietechnik K-I-150 Year of manufacture: 2017 Equipment: Drill chuck pneumatic workpiece clamping (Wachtler) Guodpfozz Nf Nsx Ag Ssh

Condition: new, Nexturn SA32B with the following attachments: - Iemca Boss 338 bar feeder Max. machining diameter: 32 mm Max. machining length: 210 mm Axes: 7 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for powering the machine and control with 200 V / 50 Hz and chip conveyor for mounting on Nexturn machines, with machine tank Modular system, all driven tools are from WTO, Made in Germany incl. ejection of long parts Scope of supply: FANUC Oi TF+ CNC control with 7 controlled axes C-axis on main and counter spindle Main and counter spindle collet type standard Synchronously driven guide bushing unit Guide bushing type standard Standard equipment tool holder Linear slide 5-position tool holder shank 16x16mm 4 drilling units ER16 Drilling unit for front/rear face machining, with 5 drilling sleeves ER16 Counter spindle for rear machining Rear machining with 4 machining stations ER16 Drive unit for tools for rear machining, 2 stations fixed and 2 stations driven Gujdpovyzqfefx Ag Soh Pneumatic workpiece ejection device Part ejection control Blow-out device for counter spindle Workpiece remover Workpiece conveyor for removing the workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adaptation up to 100 bar) Coolant through the counter spindle Automatic central lubrication with level monitoring Tool box with special tools Interface for bar feeder Interface for chip conveyor PCMCIA card slot USB interface RJ-45 LAN interface RS 232 C interface Control functions in standard scope of supply: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear corrections Operating hours display Workpiece counter Network connection Background machining Automatic power-off function Program flow controllable via handwheel High-speed skip function for using measuring probes Spindle speed monitoring (G25 - G26) Thread cutting with variable pitch (G34) Circular arc thread cutting (G35 - G36) Cutting radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main and counter spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and counter spindle (M56 - M57) 4 additional free M commands

Condition: used, Year of construction: 2017, Citizen Miyano BNA-42MSY2 Fixed Headstock Lathe 7 Axis Machine with Cincom/Citizen CNC Control, Twin Spindle Collet Chucks, 8 Position Tool Turret all Driven, Max Work Piece Diameter 42mm, Main Spindle Speed 50 - 5000rpm, Sub Spindle 50 - 5000rpm, Parts Catcher & Conveyor, LNS Turbo MH500 Swarf Conveyor. S/No. DL0110 (08/2017) 3000kg, Iemca Boss 552-HD 5 meter Barfeed. S/No. 021805GA03 (2018). Selection of Driven & Static Tooling for BNA42. Country of Origin: Japan Gusdoz Arncjpfx Ag Soh Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: new, Nexturn SA32B with the following attachments: - Loading magazine Iemca Boss 338 Max. machining diameter: 32 mm Max. machining length: 210 mm Axes: 7 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for supplying the machine and control with 200 V / 50 Hz and chip conveyor for mounting on Nexturn machines, with machine tank Modular system, all driven tools are from WTO, Made in Germany incl. discharge of long parts Scope of delivery: CNC control FANUC Oi TF+ with 7 controlled axes C-axis on main and counter spindle Main and counter spindle collet type standard Synchronously driven guide bush unit Guide bush type standard Standard equipment tool holder Linear slide 5-position tool holder shank 16x16mm 4 drilling units ER16 Drilling device for front/rear face machining, with 5 drilling sleeves ER16 Counter spindle for rear face machining Rear face machining with 4 machining stations ER16) Drive unit for tools for rear face machining on 2 stations fixed and 2 stations driven Pneumatic workpiece ejection device Part ejection control Blow-out device for counter spindle Workpiece ejector Gujdpfxevyzp Is Ag Sjh Workpiece conveyor for removing the workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adjustment up to 100 bar) Coolant through the counter spindle Automatic central lubrication with level monitoring Toolbox with special tools Interface for bar loader magazine Interface for chip conveyor PCMCIA card slot USB interface RJ-45-LAN interface RS 232 C interface Control functions in standard scope of delivery: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear corrections Operating hour display Workpiece counter Network connection Background machining Automatic power-off function Program flow controllable via handwheel High-speed skip function for using measuring probes Spindle speed monitoring (G25 - G26) Thread milling with variable pitch (G34) Circular arc thread cutting (G35 - G36) Cutting radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main spindle and counter spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and counter spindle (M56 - M57) 4 additional free M commands

Year of construction: 1997, condition: used, functionality: limited functionality, machine/vehicle number: 9.037, The flat pouch packaging machine is suitable for packaging granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be packaged and an intermittent supply of the packaging material. All packaging operations are performed in automatic mode. In 2006, the packaging machine underwent a complete overhaul and was equipped with an automatic twin-scale dispenser as an additional machine unit. As a result, the machine is suitable for dispensing not only powdered materials but also granular materials (e.g., coffee, pasta, soup granules, etc.). The equipment was removed from production; there were no problems with it, but it has not been in operation for a long time and may therefore require refurbishment. Gedpfx Agoz Ryhxo Sjuh Stored in a covered, enclosed warehouse.

Condition: used, Year of construction: 1997, functionality: fully functional, BAIER Geba 46/A embossing and punching machine, year of manufacture 1997 fully operational - two punching units - Geotin cutter - operating documentation Gjdpfoyt Igwox Ag Ssuh max. material width: 250 mm max. punching width: 240 mm heating power: 2200W embossing force: 100kN

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning length: 503 mm, turning diameter: 190 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 135 mm, travel distance Z-axis: 503 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 40 m/min, type of input current: three-phase, torque: 75 Nm, overall weight: 6,200 kg, spindle nose: A2-5, CNC Lathe NAKAMURA-TOME WT100 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2012 CNC control: FANUC 31i-B Distance between spindles: 735 [mm] Max. cutting diameter: 190 [mm] Max. turning lenght: 503 [mm] Stroke Y axis: -31 / +31 [mm] Stroke Z1 axis: 503 [mm] Stroke X1 axis: 135 [mm] Stroke Z2 axis: 503 [mm] Stroke X2 axis: 135 [mm] Rapid traverse rate X1 axis: 16000 [mm/min] Rapid traverse rate X2 axis: 16000 [mm/min] Rapid traverse rate Z1 axis: 40000 [mm/min] Rapid traverse rate Z2 axis: 40000 [mm/min] Rapid traverse rate Y axis: 6000 [mm/min] Spindle nose: A2-5" Max. bar diameter in turning spindle: 42 [mm] Spindle throughbore: 56 [mm] Max. spindle speed: 6000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 11 [kW] Spindle torque: 75.4 [Nm] Counter spindle nose: A2-5" Counter spindle throughbore: 56 [mm] Counter spindle stroke: 525 [mm] Max. counter spindle speed: 6000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 11 [kW] Counter spindle torque: 75.4 [Nm] Max. tool holder cross-section: 20 x 20 [mm] Number of tool stations - Turret 1: 12 Number of tool stations driven - Turret 1: 12 Max. speed driven tools - Turret 1: 6000 [rpm] Number of tool stations - Turret 2: 12 Number of tool stations driven - Turret 2: 12 Max. speed driven tools - Turret 2: 6000 [rpm] Live tools power: 7.1 [kW] Total power required: 55.2 [kVA] Supply voltage: 400 [V] Weight: 6200 [Kg] INCLUDED EQUIPMENT: x1 IEMCA BOSS 545 E Type 32 L bar feeder (3 m bar capacity) x1 SMW-AUTOBLOK Mario Pinto PPBE-42 A5 collet chuck (S1 spindle) x1 Collet chuck (S2 spindle) x4 Radial driven tool holders x2 Axial driven tool holders x16 Static tool holders x1 Foot pedal control for chuck open/close x1 Parts catcher on upper turret with conveyor belt Gujdpfx Agszhvwlo Soh x1 Chip conveyor x1 Automatic lubrication system x1 Three-color status indicator lamp x1 Transformer x1 USB memory stick for parameter backup Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to turning and milling centers, machining centers and milling machines, including brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG and Mazak. CNC lathe, CNC turning center, CNC turning machine, machining center, CNC milling machine, CNC machining center, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Year of construction: 1984, condition: used, Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm Gusdpjd Hp Tzofx Ag Seh -Weight: 416 kg

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio Guedpetrpiiefx Ag Sjh - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: new, work piece width max 145 x 150 mm band speed 1.0 - 8.0 m/min workpiece height max. 100 mm total power requirement ca. 5.5 kW weight of the machine ca. 900 kg. dimensions of the machine ca. 1560 x 870 x 1920 mm Wide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm - Maximum workpiece height: 100 mm - Max. height adjustment: 100 mm - Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes - Pressure rollers in front of and behind each unit - Adjustable feed speed - Fixed table, constant feed height - Vacuum table - Pressure of the brushes and grinding wheels adjustable Gjdozwxy Ispfx Ag Seuh . without opening the hood INCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm - Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDGE ROUNDING - Unit for rounding the edges of laser-cut parts - Adjustable speed of the disc brushes - 1 brush rotates clockwise - 1 brush rotates counterclockwise - Brush diameter: 250 mm - Motor power: 2 x 1.1 kW INCLUDED CONVEYOR BELT - The conveyor belt is made of synthetic rubber - The belt has high adhesive strength to hold parts in place - The conveyor belt is oil- and spark-resistant - Transport speed: 1-8 m/min. INCLUDED VACUUM TABLE FOR SECURING SMALL PARTS - Installed as standard - Vacuum motor power: 2.2 kW - Minimum workpiece dimensions: 25 x 25 mm - Maximum workpiece dimensions: 145 x 150 mm GENERAL INFORMATION: - Mechanical measurement of workpiece thickness - Digital display of material thickness - Pressure rollers are spring-mounted - Fixed working height

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Gusdpfx Ajv Uraajg Soh Good condition

Condition: used, machine/vehicle number: Maschinen-Nr.: 89/8085, Rollprägemaschinen werden zum Prägen von massiven oder hohlen Rundteilen eingesetzt. Technische Daten: Hersteller: Borries Markier-Systeme Type: MB76EL Maschinen-Nr.: 89/8085 Prägehub: ca. 220mm Aufspannfläche: 220 x 220mm Antriebsleistung: 1,1kW Eigenschaften: Gujdpfx Agjlbgu Ie Seh - Mit geringem Kraftaufwand sind dauerhaft hohe Prägeleistungen erzielbar - Prägelänge und Prägetiefe einfach einstellbar - hoher Werkstückdurchlass - Anpassung an den Werkstückdurchmesser und die Einstellung der Prägetiefe ist durch die Höhenverstellung des Maschinentisches leicht möglich

Condition: ready for operation (used), Bar Capacity: 0.63" (16 mm) Spindle Speed: 10,000 RPM Gujdpfx Ajw Rfcqsg Seh Max. Headstock Stroke in one chucking: 12" (305 mm) Max. Drilling Diameter: 5/16" (8 mm) Max. Milling Diameter: 2/5" (10 mm) Max. Slotting Capacity: 1.5 mm x 4 mm Spindle Indexing: 15 degrees Main Spindle Motor: 2.2 kW / 3.7 kW Power Driven Attachment Motor: 0.4 kW Number of Tools: 9 Number of Live/Rotary Tools: 2 Rotary Tool Speeds: 350 – 5,000 RPM Max. Chucking Diameter: 5/8" (16 mm) Max. Length for Front Ejection: 5" (127 mm) Max. Drilling Diameter: 1/4" (6.5 mm) Number of Tools: 3 Sub-spindle Speed: 400 – 6,000 RPM Sub-spindle Motor: 1.5 kW Dimensions: 81" x 46" x 67" (2,057 mm x 1,168 mm x 1,702 mm) Weight: 5,100 lbs (2,313 kg) Options: Fanuc Bar Feeder IEMCA MINI BOSS 325r Live Tooling (not working) Sub Spindle

Condition: good (used), Year of construction: 1973, machine/vehicle number: 73040, Embossing press Baier GEBA 1/F, installation height 90 mm, pressure capacity 800 kg, working size 10cm x 14 cm, built in 1973, machine number 73040, in good condition, immediately available Godpfx Ajvt Rpqog Ssuh If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment.

Condition: ready for operation (used), functionality: fully functional, A good used barcode verification system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line (label applicator was removed and sold) - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required - setup currently for EAN 13 Barcodes and has Teach facility built in for new barcode or changeover Guedowufb Ajpfx Ag Seh Conveyor could also be used for Ink Jet Printing of underside of packs Could be refitted with your own label applicator also - mounting boss still in place for original Pago Applicator Single phase 240Volt AC supply Ready to ship worldwide

Year of construction: 1976, condition: used, Embossing machine Kolbus PE - PE 70 Year: 1976 Godpfozat H Aox Ag Seuh Tandem configuration consisting of 2 interconnected Kolbus PE 70 embossing machines. - Case pre-stacking conveyor - Case bending station: DBA - Foil transporting device - Case infeed 90° swivelling

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 5601-0106, turning length: 320 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,800 kg, bar passage: 33 mm, equipped with Iemca Boss 542 new in 2000 – well tooled – Ge Fanuc 18i-T Control Gedpfx Agjxn R N Ao Seuh

Condition: used, Foil Stamping & Embossing Machine Kolbus PE 70 with automatic Feeder and Pre-stacking conveyor. Guedpfsydfwzjx Ag Soh Heißfolienpräge- & Prägemaschine / Foil Stamping & Embossing Machine Kolbus PE 70 Baujahr / Year 1979 - Serial-No. 178 Open cover size  min.170 x 100mm - max. 660 x 405mm Printing surface 420 x 355mm Pressing power 35 tons Geschwindigkeit / Speed max. 70 cycles/min. Vorstapel Föderband / Case Pre-stacking conveyor Anleger für Buchdecken / Feeder for cases Deckenausbiege Station / Case bending station Folientransportvorrichtung / Foil transporting device Folienabwickelvorrichtung / Foil unwinding device Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2002, condition: used, Working widths 1800 mm roll surface width 2000 mm Number of rollers 2 St./ea Upper roll Gravur oder Stahl dia diameter of upper rolls 210 mm Heating - upper roll Elektro Lower roll Gummiert dia diameter of lower rolls 300 mm Roller covering - soft rubber 95 °Sh weight 2 t dimensions of the machine ca. 3,0 x 1,5 x 1,8 m Embossing Calender with exchangeable top roll, The following spare rollers are included with the machine: • 1 x steel roll, chrome plated Gedpfx Agot An E Rs Sjuh • 3 x engraving rolls, various designs • 1 x spare bottom roll - rubber coated On the outlet side there is a small batch - rising batch winder ATTENION: the electrical control unit is defective, still needs to be replaced, therefore SPECIAL PRICE for self-repair

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 21047A, spindle speed (min.): 10,000 rpm, turning length: 210 mm, overall weight: 2,050 kg, bar passage: 20 mm, equipped with Iemca Boss 338HD/32 barfeed new in 2017 – fixed and rotating bushing – evacuation of long pieces through the sub spindle + external apparatus – chip conveyor – some collets and guide bushings – Fanuc 32i-B Control. Gedpfxswt Th Io Ag Sjuh