Used Thermostats for sale (195)

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 Gbodpfx Aexnzlhjf Ael SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: used, - RIS AG Series - Clean water at +1°C - External dimensions (W x D x H): 1500 x 2600 x 2300 mm - Tank volume: 3,000 L - Power: 5 kW - Power supply: 400 V - 3 Ph - 50 Hz - Maneurop refrigeration unit --- Type: Ris AG 30 --- Power: 380 V - 3 Ph - 50 Hz --- Serial number: 1299 --- Refrigerant: R22 - Pump flow rate (for information): from 4 m³/h at 4.5 bar to 12 m³/h at 3 bar - Store power for peak demand - Allows acceptance of warm return flows at the start of the cycle - Store energy cost-effectively, either by direct expansion or glycol water Gedpfx Afey Ic D Uo Asbl - Unit can be supplied with or without refrigeration group - Monobloc tank, ready for connection - Polyester tank insulated with polyurethane foam - Stainless steel 316L grid-type heat exchanger - Glycol water heat exchanger at -8°C or with a direct expansion refrigerant - Regulation solenoid valve (glycol water version) or thermostatic expansion valve (direct expansion version) - Chilled water distribution pump with safety by-pass, flow regulating valve and pressure gauge - Agitators - Drain valve, overflow - Automatic water make-up - Return loop standby - Service hatches - Power and operation management electrical cabinet Overhauled equipment: units are serviced and prepared to order; delivery and collection times are arranged at the time of order (please request a price quote after overhauling).

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 300062271 / 800305248, Equipment: CE marking, NEW (USED for 1 test) The HABITAT control tower package is ideally suited for HABITAT’s cell culture applications, enabling advanced monitoring and control of bioprocesses. This package features the control unit with comprehensive connection options for gas supply, liquid addition, sensors, and temperature regulation, complemented by a tablet for straightforward and clear operation of the bioreactor. Process Control & Monitoring: All bioprocess parameters and associated test values can be conveniently managed and monitored via the integrated tablet, which is attached to the control unit. The intuitive, user-friendly software allows selection between batch, fed-batch, and perfusion/continuous operation modes, depending on your cultivation requirements. The new 'Chaotic Mixing' feature enables rapid and effective mixing when needed. The 10.4-inch touchscreen tablet provides direct access to all actuators from the main interface. Key functionalities include clear calibration management, diagram overviews, and comprehensive process documentation. An optional software version compliant with FDA CFR Part 11 requirements is available. Key Features: - Compact, space-saving design: 223 x 402 x 450 mm (WxDxH) - Large 10.4-inch tablet for user-friendly operation - Intuitive software with extensive features - 4 integrated Watson Marlow fast-load pumps - Multiple interfaces: USB, PC, RS232, Ethernet, external signal input, external pump, single-use unit, thermostat - Data storage capabilities Gbedpfx Asy D Rq Usf Aol The 1L vessel set for the HABITAT research bioreactor includes a 1-liter single-walled glass vessel designed for cell culture applications, alongside a compatible stirring drive. In conjunction with the separately available control tower package (e.g., HABITAT cell), you receive all essential components for successful cultivation.

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 4 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low-noise - only 48 dB no dust - no fan Gbsdpfx Afsqvlvme Ajl no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 2.5 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel Gbsdpjqvlu Esfx Af Asl low noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: used, -Reference: 7.2 / 84x214-4 -Oven dimensions (WxDxH): 1475x2780x2400 mm -Hearth size (WxD): 840x2140 mm -Baking surface: 7.2 m² -Serial No.: 1405116/BN/0010 -Temperature: 300°C -Electronic controls -Year: 2014 -4 decks -Voltage: 400V -Power: 43.5 kW -Weight: 3400 kg -High-efficiency combustion chambers -Combustion chamber with reinforced insulation -Large radiant surface across the three flue channels, ensuring rapid temperature recovery after loading -Flue channels fully lined with refractory material to improve temperature retention and heat resistance STEAM -Steam generator for each deck Gjdpfx Afsy H Hykj Aobl -Steam generators located on the right side inside each baking chamber -Electrovalve group for water supply mounted on the oven roof -STEAM EXHAUST -Individual steam exhaust for each baking chamber -Hood with steam extraction fan -Steam extractor with single speed -Manual steam exhaust valves ELECTRICAL INSTALLATION -Controls located on the left side -Electrical panel accessible from the front for easy maintenance -Lighting system with 1 lamp per deck positioned at the mouth, easily replaceable -Safety thermostat

Condition: used, This listing is for the Thermo Haake SC100 Water Bath + Immersion Circulator. The unit is in full working condition and ready for immediate use. Thermostatic water bath with integrated immersion circulator, designed for accurate temperature control in research and industrial labs. Ideal for sample incubation, heating, and fluid temperature regulation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Godpoy H Dlqofx Af Aobl • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: new, Year of construction: 2026, HOT AIR GENERATORS by wood model FABBRI F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery NEW PRICE LIST year 2026 WHILE STOCK IS STILL AVAILABLE I CAN GUARANTEE PRICE LIST year 2024 Super discount while stocks last Gedpfxof H Hlro Af Ajbl 100% made in ITALY for heating sheds, warehouses, work and private environments Fuels: Wood - Chips - Paper - Cardboard CE marks: Yes volt. 220 single-phase ( model F28 and F55CV ) volt. 380 ( model F85CV - F120CV - F240CV ) CV models are equipped with an additional fan for smoke expulsion at the base of the flue model available : F28 . surface to be heated up to m2 100/150 F55CV . surface to be heated up to m2 300/350 F85CV . surface to be heated up to m2 450/500 F120CV . surface to be heated up to m2 650/700 F240CV . surface to be heated up to m2 1000 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by one or more electric motors. Electric command and control panel - adjusting thermostat. Maintenance: Ordinary maintenance means the removal of the deposited ashes by opening the door. Once or twice a year, perform a general cleaning of pipes.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: AC, Temperer Thermo Quick Duo Tempering machine for couverture Model: Thermo-Quick Duo with 2 removable bowls Thermostat-controlled (70°C) Connection: 230 V Dimensions: 760 x 410 x 240 mm (W x D x H) Gbedpfsygda Hox Af Ajl Used machine We have many more machines in stock!

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Recirculating chamber oven, electric, with 12-month warranty. Program controller upgraded to new Jumo Dicon, fan will be re-bushed, updated images coming soon. - Capacity: 8,000 liters - Tmax: 300°C - Internal dimensions (W x D x H): 2000 x 2000 x 2000 mm - External dimensions (W x D x H): 2559 x 2578 x 2665 mm - Adjustable fresh air inlet and exhaust outlet with damper - Optional exhaust fan and frequency converter available on request - Safety thermostat - Program controller upgrade to the new Jumo Dicon Touch: 10 programs, each with 50 segments, with network interface - Recirculation fan newly re-bushed - Double door - Heating capacity: 36 kW - Total power: 39.8 kW - Power supply: 400V, 3-phase, 50 Hz - Weight: 1,300 kg Gbodpfx Afey Am R Uj Asl - Documentation and CE declaration included - Electrically tested with valid DGUV measurement protocol Viewing available in our machinery hall by appointment at any time. Oven, ovens, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, recirculating oven, chamber oven, heating chamber, chamber recirculation oven, tempering oven, tempering furnace.

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. Gjdpfx Afoydh Ags Aobl 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, year of last overhaul: 2026, total height: 1,135 mm, total length: 825 mm, total width: 1,325 mm, type of input current: three-phase, DGUV certified until: 04/2027, Fat fryer Jufeba WW - S 20 Full reversible basket for max. 60 pieces Lifting device, manual removal device 1 fermentation trolley with 8 aluminum tipping trays LED temperature controller with safety thermostat Steam cover, drip tray on the left Fat baking station with 1 dipping basket Output approx. 600 pieces/hour. Stainless steel version, mobile Connection 400V, 9 kW, 32A-CEE plug Dimensions: 1325/2425 x 825 x 1135 mm, WxDxH Used device cleaned and checked with 6 months warranty Gbodpfxjin D U Dj Af Aol Come and take a look at our large warehouse of bakery machines

Condition: new, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 43 kg, fuel: super 95, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 700 Operating pressure (bar) 200 Maximum pressure (bar) 250 Water connection R 3/4″ Drive type: Gasoline Engine type: G210FA High mobility Color: Anthracite Weight with accessories (kg) 43 Dimensions (L x W x H) (mm) 878 x 538 x 702 Scope of delivery: Kärcher Classic spray gun - M22 thread High-pressure hose: 10m Kärcher Classic lance 850mm Power nozzle 25° Water filter Gbodpfxsw Exv Io Af Ajl Equipment: Protective frame Crankshaft pump with ceramic piston Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient manual start. High mobility: Large inflatable wheels for comfortable operation on difficult terrain. The compact and small device is very easy to maneuver even in tight spaces. Fits in a car. Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation mode. A crankshaft pump with ceramic pistons. The compact Kärcher HD 7/20 G Classic high-pressure cleaner without water heating is the ideal choice for beginners using gasoline-powered devices. The device can be easily transported in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 200 bar and is equipped with a durable crankshaft pump and a pumping capacity of 700 liters per hour. An integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources, inflatable wheels that ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories ensure user-friendly operation. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 7/20 G Classic's sturdy steel frame also prevents external and mechanical damage. The unit does not have the ability to draw water from alternative sources.

Condition: used, Used plant for production of 99.5% technical glycerin from 80-85% crude glycerin using multi-stage distillation and rectification. Plant was commissioned in 2012. Technology and design are by Desmet Ballestra Oleo. Main Sections of Equipment: Gjdpfx Ajyw Tctof Aobl - Thermostatized Water - Glyercine Distillation - Distillation Pitch Dilution Process description, equipment list and drawings available.

Condition: new, Year of construction: 2024, R5 RA 1600 B 4EB XXXZ 4.00 PCS 05.12.2023 25,000.00 / 1 PCS 100,000.00 Explosion protection Ex Inside II 2G Ex h IIB T3 Gb X Outside II 3G Ex h IIB T3 Gc X Without motor Ex B5-550 d65 50/60Hz Coupling PKZ 20 ATEX Oil separator with: - Antistatic venting element - G3/4 for thermostat probe Heat exchanger 41.2kW without air cooler Base frame with bore d50 Vibration dampers 4xd100 + 3xd150 Cooling water inlet G1/2 vertical with temperature controller Water valve, bypass with ball valves, G1/2 coupling Cooling water outlet G1/2 vertical with G1/2 coupling Ball valve DN25 G1 in oil drain Without temperature switch in gas Without temperature switch in oil Without level switch G3/4 Filter differential pressure gauge elevated with angle Thermometer 0-120°C R1/2 with extension Without resistance thermometer PT100 valve side 4 units available Unit price !!!!! Gbsdpsyzbd Tsfx Af Asl

Condition: new, PRICE: 9500 EUR Electric Boiling Kettle Manufacturer: Talsa Model: REA165pp Made of stainless steel 2 internal safety thermostats Lid opens and closes effortlessly Volume: 165 liters Electric power: 12kW External dimensions: 80x107x111cm Godoup Afrjpfx Af Asbl Internal dimensions: 44x70x54cm Weight: 260kg

Condition: new, PRICE: 14500 EUR Electric Boiling Kettle Manufacturer: Talsa Model: REA505pp Made of stainless steel 2 internal safety thermostats Lid opens and closes effortlessly Volume: 505 liters Electric power: 36kW Gedpoup Amiofx Af Aobl External dimensions: 172x107x111cm Internal dimensions: 136x70x54cm Weight: 485kg

Year of construction: 2023, condition: new, INTERSONIK MINISONIK series provides fast, reliable and economic solution in parts washing! Perfect parts washing systems for degreasing and precise cleaning Operation Principles: High frequency (25 kHz) which is obtained in liquid, creates millions of microscobic air bubbles loaded with vacuum energy, strike to dirty surfaces and explode and so oil, chip, carbon, lime, blood tissue are removed. Minisonik ultrasoniks washer are available in 4 different size, 4l , 12l , 18l and 28 liter versions. All minisoniks are ready for delivery. Minisonik’s Standarts: - Machine is produced completely in stainless stell - Timer is mechanical or digital [optional] - Operation temperature is controlled by mechanical or digital thermostat (optional) Application Areas: ► Automotive spare parts cleaning like injector elements, pump’s elements, spark plug etc. ► At hospitals, clinics, laboratories, medical materials and surcigal instruments. ► Dentist instruments. ► Jewellery products. Gbodsd I Dnvspfx Af Ajl ► Electronic components and PCB cards. ► Textile industry equipments. Please check the technical specifications in the attached document. ultrasonic cleaner, 18 liter ultrasonic cleaner, 12 liter ultrasonic cleaner, 4-liter ultrasonic cleaner, 28-liter ultrasonic cleaner, tabletop ultrasonic cleaner, benchtop ultrasonic cleaner Please feel free to contact us for further details

Year of construction: 2023, condition: new, INTERSONIK MIDISONIK series provides fast, reliable and economic solution in parts washing! Intersonik ultrasonic cleaners are perfect parts washing systems for degreasing and precise cleaning. Operation Principles: High frequency (25 kHz) which is obtained in liquid, creates millions of microscobic air bubbles loaded with vacuum energy, strike to dirty surfaces and explode and so oil, chip, carbon, lime, blood tissue are removed. Midisonik ultrasonic washers are available in 4 different size, 40l , 50l , 60l and 80 liter versions. Midisonik’s Standarts: - Machine is produced completely in stainless stell - Timer is mechanical or digital [optional] - Operation temperature is controlled by mechanical or digital thermostat (optional) Application Areas: ► Automotive spare parts cleaning like injector elements, pump’s elements, spark plug etc. ► At hospitals, clinics, laboratories, medical materials and surcigal instruments. ► Dentist’s instruments. ► Jewellery products. ► Electronic components and PCB cards. Gbedpfod I Dpdex Af Ael ► Textile industry equipments. Please check technical spesifications in the attached document. ultrasonic cleaner, ultrasonic washing machine, 40 liter ultrasonic cleaener, 50 liter ultrasonic cleaener, 60 liter ultrasonic cleaener, 80 liter ultrasonic cleaener, ultrasonic cleaner for automotive, ultrasonic degreaser Please feel free to contact with us for further details.

Year of construction: 2021, condition: new, Intersonik top loader rotary basket washers are a quick and economic solution to your parts washing needs. It is easy to use and nature friendly. Top loading mechanism makes the product easy for loading and unloading the washing basket. High-pressure water is sprayed via positioned nozzles during the washing cycle at the same time basket is rotated for even better washing quality. Technical details of the top loader spray washer is listed below: Nr. - Item - Details 1 - Machine dimensions - 850 x 850 x 1000 mm 2 - Loading height - 750 mm 3 - Loading capacity - 380 mm 4 - Stainless steel body - AISI 430 (1.5-2 mm) 5 - Pump power and number - 2.5 hp x 1 6 - Pump body - AISI 304 Gsdpehcimzefx Af Aobl 7 - Total heating power - 15 Kw 8 - Electricity - 380 V / 3 Phase 9 - Timer - 0-30 min 10 - Thermostat - 0-90 C 11 - Basket and nozzles - Galvanized coating 12 - Electrical components - ABB and Schneider or equivalent 13 - Pneumatic components - Mag and Festo or equivalent 14 - Oil skimmer - Available 15 - Drying fan - Optional 16 - Rinsing tank - Optional 17 - Ebara pump - Available 18 - Liquid level sensor - Optional 19 - Automatic liquid filling - Optional 20 - Mist exhaust fan - Optional

Condition: good (used), total length: 5,000 mm, film width: 550 mm, product height (max.): 150 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink Film Packaging Line Manufacturer: Hugo Beck Model: Flexo 500 S Horizontal film packaging machine with side sealing for tubular film, comprising film wrapping machine and downstream shrink tunnel. The intermittent motion tubular bag machine Flexo 500 impresses with its outstanding versatility and flexibility. Whether for frozen pizzas, biscuit boxes, fruit and vegetables, books, skis, laminate flooring, or various household products, this machine equips you to handle any application quickly and efficiently, ideal for daily changing production orders. - Film Wrapper Hugo Beck Flexo 500 S, Year of manufacture: 2003 Gbjdpfx Afeyw H Rke Ael Workpiece dimensions: Width: approx. 55 - 400 mm Height: approx. 2 - 150 mm Length: from min. approx. 80 mm, theoretically unlimited Consumables/Film: Center-folded (half-tube) film, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate: approx. 20 m/min Rated voltage: 400/230 V, 50 Hz, 3 phase Rated current: 5 A Connected load: 3 kW Machine dimensions: approx. 2500 x 1500 mm (LxW) Weight: approx. 650 kg - Shrink Tunnel Hugo Beck Type HV 601, Year of manufacture: 2002 Working width: approx. 600 mm Pass-through height: approx. 300 mm Feed rate continuously adjustable Chain rod transport, silicone-coated transport rods Temperature control via electronic thermostat, separately adjustable top and bottom heat Heating capacity: approx. 4 - 12 kW Rated voltage: 230/400 V, 50 Hz, 3 phase Rated current: 19 A Connected load: approx. 12 kW Machine dimensions: approx. 2500 x 1100 mm (LxW) Weight: approx. 400 kg

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Gbsdpfx Asvw A T Nof Ael Cooling capacity 3500 watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 101 S PVC Tek Köşe Kaynak Makinası, - Conforms to CE standards. - Weldable angle : All angles between 25 - 180 degrees. - Welded profile maximum height 150 millimeters - Minimum height of welded profile 40 millimeters - Upper pistons are individually compressible - Left moving table system available - Profile clamping is practically done with the pedal Gsdpfxora Niao Af Ajbl - PLC control system available - The heating unit has thermostatic control - The degree of the heating plate can be easily changed via the digital display - Heat temperature, welding time and pressure can be adjusted for different profile types - Time saving thanks to easy mold change system.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 100 ÇİFT KÖŞE KAYNAK MAKİNESİ, • Enables 0.2 mm hairline welding for both white and colored profiles. • Compliant with CE standards. Gbjdpoq U Sx Eefx Af Aol • Simplified machine control panel ensures time savings. • Delivers maximum welding strength. • Offers both standard and 0.2 mm welding capability for laminated profiles. • Movable right head is lockable via button. • Maximum welded profile length: 3180 mm. • Minimum welded profile length: 340 mm. • Maximum welded profile height: 190 mm. • Minimum welded profile height: 40 mm. • Easy mould change system provides time efficiency. • PLC control system is included. • Adjustable heating temperature, welding time, and pressure for different profile types. • Heating unit features thermostatic control regulation. • Heating plate temperature can be easily adjusted via digital display. • Power supply protects the system against sudden voltage fluctuations. • One set of welding mould is provided free of charge with the machine. • LED warning system in operation and standby modes (2026 model).

Condition: excellent (used), CTS 3G C 400* - Superheated water boiler with manual wood waste feeding Gbjdpfx Aew Ev Twof Ael Thermal output: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Control thermostat, safety thermostat, thermometer. Fuel: wood waste Smoke exhaust: cyclone, forced-draught fan, connecting ductwork Steaming chamber net capacity: 100 m³/batch DVK-I 100 m³ - 1 unit, 8.5 x 9 m x h 4.3 m Control system: Baschild Italy Sliding door Oxyvent overpressure system Stainless steel tanks and radiators on 3 sides Includes turnkey connections from boiler to steaming chamber and a complete boiler room with distributor, collector, pumps, expansion vessel, etc.