Used Time Recording Device for sale (21,309)

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level Fpsdpfxozlktpj Aatjl at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Year of construction: 2022, operating hours: 1,861 h, condition: excellent (used), functionality: fully functional, For sale is a Rösler wheel processing system, type FBA 24/2 Turbo. This system was specifically developed for the needs of professional wheel processing and, thanks to two laterally arranged unbalance motors, enables flawless results with short processing times. The stepless speed control and adjustable motor position allow the system to be flexibly adapted to almost any processing task. The compact wheel processing system is ideal for pre-grinding, fine-grinding, and polishing of standard and custom wheels up to 24 inches. Thanks to easy operation and quick abrasive change, wheels can be polished to a mirror finish in just a few hours – for a high-quality mirror finish in an elegant metallic look, both for used and new wheels. The pneumatic loading and unloading system makes loading and unloading the wheels very easy and quick. In addition to wheels, other components can also be processed here. The working container is equipped with a flexible clamping device for different wheel types and is lined with a high-quality wear-resistant lining made of polyurethane elastomer (Rösler HD 90). The specially ribbed, stress-relieved, annealed welded construction ensures a long service life and smooth, robust operation even in continuous operation. Application areas: High-gloss polishing of wheels of all types (automotive and motorcycle) up to 24 inches Aluminum, cast, and forged wheels Polishing of other engine components Refurbishing of components, e.g., from the classic car sector or the aerospace, defense, etc. industries Technical specifications: Manufacturer: Rösler Oberflächentechnik GmbH Type: FBA 24/2 Turbo wheel processing system Fedpozw A Rwsfx Aatspl Working container: Inner diameter 700 mm, container depth 550 mm Wear-resistant lining: high-quality polyurethane elastomer, Rösler HD 90 Design: durable, specially ribbed welded construction, stress-relieved, annealed Motors: 2 special unbalance motors designed for continuous operation Speed: 3,000 rpm, steplessly adjustable via frequency converter Automatic reversing of direction of rotation Various programs can be stored in the Siemens PLC control system, thus achieving reproducible results. An automatic program sequence guarantees a low error rate for the operator. We have a total of over 80 vibratory finishing systems in stock; please contact us for all your vibratory finishing needs.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00040812, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times Fsdpfx Aeykq D Heatopl - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Fodpszx S Egsfx Aatepl Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Year of construction: 2018, condition: excellent (used), TOMRA T-705 BC Single, used selective waste collection device, MFG: Feb. 2018, serial: 606657-90162001-60642, German language menu, German and English user guide, service history, made in Norway This is a device dedicated to commercial spaces or locations where large volumes of single-use or reusable containers are collected, as well as shuttles with such containers. The TOMRA T-705 selective collection device is fast, being specially designed for heavy traffic and a high demand for the collection of recyclable or reusable containers. SPEED Instant recognition of barcodes and security markers without stopping the rotation Reduced waiting times when inserting containers one after another Increased availability during peak hours CLEANING Requires less time dedicated to cleaning compared to other RVMs Cleaning the device is easier and takes less time Less time dedicated to cleaning the device, a more attractive device TWO MODELS Fpjdpfxewz Rtke Aatol Device designed for both the collection of reusable and non-reusable containers Device designed for both reusable container crates and non-reusable container crates Both models feature touch display and TOMRAPlus interface Price: 3900 Euro + VAT, negotiable , ExWorks Oradea /Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00041790, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime Fpodpfx Aeykq T Uoatol - Productivity efficiency on the lines - Optimization of weighing losses.

Condition: excellent (used), Year of construction: 2020, operating hours: 19,409 h, functionality: fully functional, number of ink cartridges: 8, color channels: CMYK + Primer + Clear + White + White, number of print heads: 2, resolution (max.): 1,200 dpi, paper width (max.): 2,500 mm, paper height (max.): 1,300 mm, total length: 4,400 mm, total width: 2,450 mm, total height: 1,250 mm, counter reading (black): 3,023, year of last overhaul: 2026, type of input current: three-phase, input current: 16 A, input voltage: 400 V, Mimaki JFX200-2513 UV-LED Flatbed Printer (Model 2020) Professional UV-LED flatbed printer from a single owner – in top condition & serviced annually by a specialist company. Fpedpfjzt Dmrsx Aatol For sale is a well-maintained Mimaki JFX200-2513 UV-LED flatbed printer from 2020. The machine comes from a single owner and has only been used in a professional environment. It was exclusively used to print on glass using printing stencils. To guarantee maximum operational reliability and perfect print quality, the system has been serviced annually by the renowned specialist company ESC. All print heads are in good condition (see nozzle test). The last check, including the replacement of wear parts, was carried out by a specialist company in July. Technical data & operating hours (values read from the interface): Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Operating hours (Use Time): 19,409 h Printed length: Print Length: Only 3,023 m, Print Area is currently only 5142m² UV lamps (LED): 2 UV-LED lamps (Note: Extremely long-lasting UV-LED technology) Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Ink configuration & special features: Ink type: Mimaki LUS-120 (Excellent adhesion and flexibility on rigid and flexible media) Color configuration: CMYK + Primer + Clear (Varnish) + White + White Your advantage: The double white configuration provides extremely high opacity and speed when printing undercoat or overcoat. The integrated primer and clear varnish enable smart finishing options (spot varnish/textures) and printing on demanding materials such as glass, metal, or acrylic. Accessories & highlights included in the scope of supply: Including a powerful suction fan (vacuum add-on): Keeps even uneven or lightweight sheet materials perfectly flat on the printing table. Transport securing device available: The original transport securing device for safe shipping is fully available. Location & removal: Easy logistics: The hall has a large roller shutter door, which makes the removal for a specialist shipping company or a service company easy and straightforward on the ground floor. Inspection and test print can be arranged at the location. Price is net, plus VAT. Errors and prior sale reserved. This offer is exclusively aimed at commercial businesses and freelancers.

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 54 mm, turning diameter: 410 mm, center width: 950 mm, center height: 200 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,100 kg, Equipment: documentation/manual, Dear Sir or Madam, We offer for sale a WEILER E35 CNC cycle lathe. The Siemens 805 cycle control and electronic handwheels make operation very simple and extremely convenient. The machine has been thoroughly inspected in our workshop, is in fully functional condition, and is available for a power-on test at any time. We look forward to your inquiry! Fodpfx Aaeyaluletjpl Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and, where necessary, worn components are replaced in advance - On request, we can completely or partially overhaul the selected machine for you - You can freely choose the paint color of your selected machine - Additional accessories such as tools can be ordered directly if required - On request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation for you

Condition: good (used), Koma Pigs stunning device This device is suitable for the electrical stunning of animals. From 2019, Regulation (EC) No 1099/2009 of 24 September 2009 concerning the protection of animals at the time of killing applies. According to the new regulations, every animal slaughtering plant should record the stunting parameters. This device has a factory-installed recorder of the deafening parameters, which measures the deafening parameters during slaughter and records them on an SDHC memory card placed in the recorder's socket. The device with the recorder gives the possibility of remote assistance when setting the de-stunting parameters. The operation  is based on the principle of automatic measurement of the body resistance of the deafened piece. In the ready-to-run state, there is only a low safe measuring voltage of approx. 15 V at the open electrodes of the forceps. When the electrodes are pressed against the animal's body, the resistance is measured and a deafening voltage of < 400 V is automatically applied, which is automatically switched off when the deafening process is completed (i.e. the electrodes are opened). Two electrodes are applied to the animal's head, while the third electrode, using a pneumatic actuator, is applied to the area of the heart, causing it to stop temporarily, as a result of which the blood stops flowing and the number of congested muscles decreases. Fedpfx Aoy Edvteatepl By stopping the heart with the third electrode, it is possible to significantly reduce the incidence of adverse factors affecting the quality of the meat.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand 3D scanner, the “Shining 3D Scanner & EX Pro(H)” Item for sale: 1 x Shining 3D Scanner & EX Pro(H) We are happy to configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! Fjdpfx Aozxxubjatjpl A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2025, KT 1880B Multifunction Safety Tester KT 1880B Multifunction Safety Tester – Automated Testing in a 6U Format The KT 1880B is a compact safety tester in a 19-inch rack-mount format (5U) that combines all relevant test types into a single unit: high-voltage testing (AC/DC), protective earth testing, insulation testing, equivalent leakage current testing, functional testing, and continuity testing. The KT 1880B thus meets the requirements for efficient, safe, and standards-compliant safety testing in accordance with IEC, EN, UL, VDE, and other international standards—making it ideal for final testing, production, and quality assurance. Fpodpfszwlfwex Aatol Technical Specifications - High-voltage test AC: 100 – 5,500 V / 0 – 3 mA - High-voltage test DC: 100 – 6,000 V / 0 – 10 mA - Insulation measurement DC: 100 – 6,000 V / 250 kΩ – 1 GΩ - Protective earth test AC: 10 – 30 A / 0 – 400 mΩ - Equivalent leakage current test AC: 100 – 270 V / 0 – 10 mA - Continuity test DC: 24 V / 0 – 600 mA - Functional test / Current consumption AC: 4 A (Option: 1 A, 10 A, or 16 A) - Wide-range power supply: 90 to 253 V / 50 Hz / 60 Hz Test Automation & Ease of Use Thanks to its integrated 4.3" TFT color display, intuitive menu navigation, and freely configurable test programs, the KT 1880B enables fully automated test sequences. The device under test requires only a single connection—no need to switch cables. This significantly reduces testing times and potential sources of error, offering a distinct advantage, particularly in automated production environments. Compliance with Standards & Workplace Safety With a short-circuit current of 3 mA AC / 10 mA DC, the KT 1880B meets the EN 50191 requirements for safety-current-limited devices. This allows it to be operated by non-specialist personnel—making it ideal for companies with mixed testing teams. Fully Electronic High-Voltage Generator The integrated digital high-voltage generator ensures high accuracy and stable test results—even during demanding test cycles and under production conditions. Typical Applications - Series production & final testing - Type testing according to international safety standards - Production of electrical devices, components, & assemblies - Automated testing environments & test benches A Combination of Flexibility, Safety, and Automation The KT 1880B is the ideal solution for safety testing in industrial environments. With six integrated test modes, fully electronic high-voltage technology, intuitive operation, and a safety-current-limited design, it meets all the requirements for modern automated testing. SPS KT 1880B Safety Tester Year of manufacture: 2025 Manufacturer's price: €6,545 (gross) Calibration date: March 6, 2025 Remaining warranty included Accessories A3/1800-K Connection and control console + CEE16; manufacturer's price: €1,318 (gross) Knürr TW 05 equipment trolley, pre-assembled with: HL 02 Holder for high-voltage test pistols SP 02 / SP 03 HL 81 Holder for protective conductor test probe PE 81-i KH 01 Cable holder Manufacturer's price incl. accessories: €3,300 (gross) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, Submitting a bid obligates you to collect the item by September 21, 2026! TECHNICAL DETAILS Sheet size: max. 3,048 x 1,524 mm Z-axis stroke: 70 mm Sheet thickness steel: 20 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminum: 12 mm Positional deviation Pa: ± 0.1 mm/m Positional scatter Ps: ± 0.05 mm Table load capacity: 750 kg Table changeover time: approx. 35 s Positioning speed X/Y axis parallel: max. 100 m/min Positioning speed X/Y axis simultaneous: max. 140 m/min Axis acceleration X/Y: max. 12 m/s² Cutting speed: max. 50 m/min MACHINE DETAILS Beam source: ByLaser 4400 Laser type: CO₂ laser Laser power: max. 4,400 W Wavelength: 10,600 nm Machine weight: 12,000 kg Laser weight: 1,700 kg EQUIPMENT Fjdpfezwmn Tox Aatspl 2 cutting heads with 5-inch and 7.5-inch lenses

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Fpsdpozr U Auofx Aatsl Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 2008, functionality: unexamined, overall weight: 1,270 kg, load capacity: 210 kg, arm reach: 2,650 mm, pivoting range: 360 °, controller manufacturer: FANUC, controller model: R-J3iB, teach pendant manufacturer: FANUC, teach pendant model: A05B-2452-C154 (abgebildet), input voltage: 380 V, type of input current: three-phase, repeat accuracy: 0.3 mm, A total of 7 FANUC R-2000iA/210F heavy-duty industrial robots are for sale. Available years/months: - 2 units: 08/2006 - 1 unit: 06/2007 - 3 units: 02/2008 - 1 unit: 03/2008 Individual sales are possible. The stated price applies net per unit, EXW Kirkel. For the purchase of multiple units, we offer an additional package discount upon agreement. Technical data: - Design: 6-axis articulated arm robot, floor mounting - Maximum payload at the wrist: 210 kg - Reach: 2,650 mm - Repeatability: ±0.3 mm - Mechanical weight of the robot: 1,270 kg - Axis speeds J1–J6: 95 / 90 / 95 / 120 / 120 / 190 °/s - Protection rating: Wrist and J3 arm IP67, other robot parts IP54 - Controller: FANUC SYSTEM R-J3iB - Controller power supply: 380–415 / 440–500 V AC, 3-phase, 50/60 Hz, 12 kVA - Weight of the FANUC control cabinet: approx. 180 kg - Teach pendant / handheld device included Scope of supply as shown in the images or upon agreement: - FANUC R-2000iA/210F robot arm with base - FANUC R-J3iB controller - FANUC teach pendant - Connection cables - Bosch Rexroth control cabinet with PSB6000 component shown in the photo for the pictured package Fpsdpezzr I Tjfx Aatel The photos show an example unit from 02/2008 (robot type A05B-1324-B215). Equipment, nameplates and scope of supply may vary per unit and will be confirmed before the sale. Condition: used, with visible signs of wear and tear as well as paint damage due to age and use. The robots were functional until the time of dismantling. No further functional testing was carried out after dismantling. Therefore, the functionality is indicated as unverified for precautionary reasons. Operating hours are not documented. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: like new (used), The NI IC-3171 is a compact, fanless industrial controller designed for use in machine vision systems, industrial automation, quality control, and measurement applications. The device is equipped with an Intel Celeron processor, 4 GB of RAM, and a 32 GB SSD, ensuring stable and reliable operation in industrial environments and research and development laboratories. Other National Instruments devices and accessories are also available: PXIe-1085 – PXI Express chassis, sbRIO-9651 – embedded Single-Board RIO controller, NI IC-3120 – industrial vision controller, NI PCIe-8233 – 4-Port GigE Vision PoE frame grabber card, NI 8234 Dual Gigabit Ethernet Controller for Windows – dual-port Gigabit Ethernet controller, NI PXIe-8238 – dual-port 10 Gigabit Ethernet module for the PXI Express platform, NI PXI-6224 M Series DAQ – M Series data acquisition (DAQ) card, NI Vision Builder AI Development Kit – software license, NI Vision Development Module Run-Time (778044-35) – runtime environment license, NI PCIe-6509 – 96-channel 5 V digital input/output (DIO) card with NI-DAQmx support, Industrial Controller and CVS I/O Accessory with a 3 m long, 44-pin male-to-female HDSub cable, Panel Mount Accessory for IC-317X Industrial Controllers – panel mount kit for the IC-317X controller series. The controller runs on Windows Embedded Standard 7 (WES7) and is designed for integration with industrial cameras, data acquisition systems, and applications requiring continuous operation. Thanks to its fanless design, the device offers high resistance to dust, dirt, and mechanical failures associated with traditional cooling systems. Specifications Manufacturer: National Instruments (NI) Model: IC-3171 Type: industrial controller Processor: Intel Celeron RAM: 4 GB SSD: 32 GB Operating System: Windows Embedded Standard 7 (WES7) Design: Fanless Operating Temperature Range: 0°C to 55°C Application: machine vision, industrial automation, metrology, test & measurement Fedpfx Aaozkazastjpl Applications Machine vision systems, Quality control and production inspection, Industrial automation, Data acquisition and analysis, Industrial camera integration, Measurement stations, Research and development laboratories, Industrial applications operating in continuous mode. Key Features Compact industrial design, Fanless operation for increased device reliability, Support for machine vision systems and measurement applications, Ability to integrate with industrial devices and control systems, Stable operation in demanding industrial environments, Solution used in quality control systems and industrial automation. The device comes from equipment used in research and development activities related to machine vision systems, metrology, and industrial automation. The technical and visual condition corresponds to the product photos. The product is covered by a short-term warranty.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive Fedpfxjxab S Eo Aatspl * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the cutting start position - Manually operated band tension control with display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand KEYENCE VL 350 3D measuring system. Item for sale: 1 x KEYENCE VL 350 We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: Fpsdpfx Aaezxqxfotsl You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle Fpodjy Tp E Aopfx Aatsl - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, PASTEURIZER machine for sale. Manufacturer: Tomo Varga d.o.o. Year of manufacture: 2016. The machine is in working condition and ready for operation after reassembly. Detailed information about the machine: The pasteurization chamber reaches an operating temperature of 85 to 100°C. Batch filling in carts 850x900x1350 mm, which can be carried into the chamber with a forklift and stacked on top of each other. Pasteurization is done with direct steam. The flow of steam inside the chamber is directed by a 5 KW fan. Regulation of temperature and pasteurization time from 60 to 100°C. Wall and door insulation 150 mm thick. The chamber is made of stainless-steel sheet AIS I304. Capacity 1056 polypropylene bottles of 1.5 l. Fpodpfswp E Hnsx Aatsl The dimension of the whole machine is 270 x 300 cm It also has a smaller electrical cabinet but that can stand separate (see picture called external electric cabinet) Included with the device: 4X carts for inserting products into the chamber and an electrical cabinet with control panel (Touch screen) The device is disassembled for transport and can be viewed in this condition at the following location: Posavska ulica 59, 10372 Oborovo (Glazir d.o.o.). Working hours: Monday - Friday (from 08:00 to 14:00). For additional information, please contact via phone number listed or email for company GLAZIR d.o.o.

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “Canon imagePROGRAF GP-4000” production system. Fjdpszb Akgefx Aatspl Item for sale: 1 x Canon imagePROGRAF GP-4000 Meter readings: Total: Approx. 4512.7 (m2) Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, please feel free to contact us directly.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 8,462 h, load capacity: 2,500 kg, lifting height: 4,500 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,950 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Fjdpfx Aaozx Hyxjtjpl ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Technical condition: normal Front tire size: 23x9-10 Front tire condition: 20 - 40% Rear tire size: 18x7-8 Rear tire condition: 20 - 40% Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2018 Battery condition: 40 - 60% Description: As is / without valid safety inspection. If you have any further questions, please call us. In addition to this model, we have approximately 150 other forklifts in stock. Feel free to browse our website at fleischmann-foerdertechnik.com. We will gladly provide you with a quote for leasing and financing, as well as delivery at favorable conditions. We also offer trade-in options for Linde equipment, even if you do not purchase a device from us. The operating hours shown were recorded at the time of listing. Subject to prior sale, changes, and errors. Side shifter, 3rd valve, roof cover.

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 16P1269203, type of input current: three-phase, operating pressure: 7 bar, pump capacity: 7 l/min, power: 0.06 kW (0.08 HP), Equipment: documentation/manual, MODE OF OPERATION The system is suitable for the proportioning (metering) and mixing of two- or multi-component products. An electronic control system monitors and regulates the specified mixing ratio. The base paint flows continuously, and the control system mixes the necessary amount of hardener (in timed intervals) via a valve. The flow rate of the base paint and hardener is measured with flow meter cells. With plunger pumps, stroke sensors can also be used. The components and cleaning agents are supplied by feed pumps. Color Selection The mixing ratios, pot life, etc., are stored in recipes. The color can be changed by simply switching recipes. Further Features and Applications: For low to medium pressure (32.5 MPa; 325 bar; 4714 psi). 2K COMFORT XL for high pressure (53 MPa; 530 bar; 7687 psi). Modular design – can be configured according to customer requirements. Electronic accuracy in metering ensures consistent quality. Processing of water-based 2K materials is also possible, as all material-contacting parts are suitable for this purpose – for example, made of stainless steel. The fluid component of the Ex version is suitable for use in potentially explosive areas (Zone 1 and 2). Many displays of the functions are language-independent and use simple symbols. Text is displayed in the selected language. Consumption overview for each component and for cleaning agents, VOC documentation. Storage of the last 700 error messages with date and time. Safety through continuous monitoring of system parameters, informing the operator when even the smallest malfunctions occur and, if necessary, automatically interrupting production. Protection of parameters by security code. Settings can be saved on a USB stick. Electronic adjustment of the mixing ratio between 0.1:1 and 50:1. Up to 100 work recipes. (Also with robot communication or Profibus.) Possibility of two separate fluid circuits: Fedpjzb I Spjfx Aatspl – for simultaneous operation, – for quick color changes, – or to separate two incompatible 2K materials from each other (e.g., PUR and epoxy paints). Programmable cleaning recipes to save up to 60% of cleaning agents compared to conventional systems. Fully automatic control and monitoring for 1–4 guns. Compatibility with solvent-based and water-based products, as well as selective automatic cleaning with water and/or solvents. Use of manual or automatic atomizers. Release of automatic spray booth, automatic gun cleaning device, etc. Possibility of robot communication.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand ‘Summa 500-9462 1400W’ production system Item for sale: 1 x Summa 500-9462 1400W Compatible with: Summa F1432 Summa F1612 Summa F1832 Summa F3220 Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. Fpedszb Aktopfx Aatsl For further information, you are of course welcome to contact us directly.

Year of construction: 2008, operating hours: 470 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Yxlon MU 2000, Yxlon MU 2000 type industrial X-ray screening equipment with 160 KV output: The system were totally refurbished in 2020. The flat panel and all of the axiscontrol electromotors were also replaced!!! The stained glass viewing window with a safety lock can be opened with two hands and the workpieces can be inserted without stopping the radiation! The workpieces can be moved using a five-axis manipulator. The movement can be programmed, which speeds up the work and makes the evaluation more accurate. However, it is also possible to move it manually for inspection! Size and weight of the workpieces: - Diameter: 400 mm Length: 900 mm Weight: 60 kg - Cabinet dimensions: 2200 x 2700 x 1800 mm - Weight: 4000 kg - Computer control The machine automatically moves the inspection table and the tilt angle and height of the C-arm according to the program compiled on the basis of the parameters of the places to be tested, so that the number of testable pieces can be significantly increased in the case of serial tests. Several components can be loaded into the cabin at the same time, and the machine examines them one by one according according to the programming. MG 165 x-ray device Y.TU-160 D 06 metal-ceramic X-ray tube, for detecting small defects in steel or aluminum castings, parts - Focus size: 1.0/0.4 mm - Test voltage: 8-160 kV, 1.00/0.64 kW power - Closed system water cooling WL3002 - Translucent material thickness: steel 35 mm, / aluminum 45 mm XRD Flat Panel - 200 x 200 mm active area - 512 x 512/400 μm/30fps or 1024×1024 pixels/200μm/15fps resolution - Special frame grabber - Y.T24.CD01, 24″, 1920×1200 pixels, color TFT monitor - Load capacity: 160 kV Control panel - MGC 41 control panel - Manipulator control (joystick) - Door control, push buttons /two-handed/ Fpedeu Hzvxepfx Aatol - Image processing control - digital image processing software - Image archiving - Image captioning - Image comparison with a reference image - zoom function - blackout control - Fast video card + frame grabber + evaluation PC - Measurement and calibration functions - Windows operating system - DICONDE data format

Year of construction: 2020, condition: like new (used), functionality: fully functional, MED-CONT MODULAR SYSTEM Originally custom-built for medical device manufacturing, the MED-CONT Modular System is a turnkey, relocatable modular technical facility offering approximately 100 m² of high-quality laboratory, production and office space. The system is ideally suited for: Medical device manufacturing Biotechnology and life science companies Electronics manufacturing and assembly Research & Development (R&D) centres Universities and research institutes Start-ups and scale-up companies Pilot production and prototyping Quality control and testing laboratories Pharmaceutical manufacturing support Clean assembly and light manufacturing Contract manufacturing (CMO/CDMO) Engineering and automation companies Humanitarian and disaster response projects Military medical and technical field operations Mobile laboratories and temporary technical facilities The system comprises three 40' High Cube CARU ISO technical containers and one 20' office/administration container, providing a fully integrated and relocatable working environment that can be deployed wherever high-quality technical space is required. Key Features Approx. 100 m² modular technical facility 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Fully insulated construction Heating and air conditioning (HVAC) 220 V / 380 V EU electrical installation High-quality LED lighting Ethernet network infrastructure Indoor-stored, outdoor-deployable Modular configuration – containers can be connected or operated individually Built in 2020 Excellent condition Fully functional Typical Applications Medical device manufacturing Electronics assembly Laboratory operations Pharmaceutical applications Research & Development Pilot production Start-up manufacturing Quality control laboratories Corporate innovation centres Technical training facilities Mobile production facilities Mobile technical support centres Humanitarian and disaster response projects Military field laboratories Office Container Fodpfxeznmvro Aatopl The integrated office container provides a comfortable administrative workspace featuring: Office area for up to four workstations Meeting table for 5–6 people Heating, cooling and Ethernet network connection Ideal for administration, engineering, project management and customer reception Included in the Sale The sale includes the complete MED-CONT Modular System, consisting of: 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Additional laboratory, production and utility equipment is available by separate negotiation. Business Advantage The MED-CONT Modular System represents a cost-effective alternative to constructing or refurbishing conventional laboratory and technical facilities. It enables organizations to establish high-quality laboratory, production and office space within a fraction of the time required for traditional construction, while maintaining the flexibility to relocate or expand the facility as operational needs evolve.