Used Trimill Trimill Vu 2313 for sale (112)

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Redpfxsfxyh Rj Amaeu Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Rodpfx Aok S Dt Tomasu Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, New: No Please contact us for more information. Rsdpfsyvr Niox Amaju

Condition: new, Year of construction: 2019, machine/vehicle number: DF0277-Rev06, pressing force: 10 t, pressure:10 t distance between columns:200 mm stroke:200 mm weight of the machine ca.:1,5 t dimensions of the machine ca.:2000 x 1420 x 760 m heating plates :660 x 210 mm :200 mm Redpfxoffamys Amaeu :200 mm Oil Tank Capacity:70 l Table Height:1100 mm :125 mm Ram Height:250 mm

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l Redpfx Aofxygpsmasu weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm Rodpfex Ap Itjx Amaju For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm Rjdpfotwv S Nex Amaou - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: good (used), Year of construction: 2012, lifting height: 30,500 mm, fuel type: diesel, Weights Redpfxoyccpxs Amaju Empty weight: 7.240 kg Functional Lifting capacity: 320 kg Working height: 3.250 cm Working width: 255 cm Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 2088 m Max swing of platform in degrees: 180 Transport dimensions (LxWxH): 8,8x2,55x3,55 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 330 Year of build: 2012 Condition: Used Data: Max. working height: 32,50 m Max. platform height: 30,50 m Max. reach: 20,88 m Total dimensions LxWxH: 8,80 x 2,55 x 3,55 m Platform dimensions LxW: 1,71 x 0,86 m Max. basket load: 320 kg Swivel range: 180° Ground pressure: 56 kN Ground clearance: 0,15 m Support width vertical: 2,53 m Support width one side: 3,86 m Support width both sides: 5,30 m Support length: 4,87 m Empty weight: 7.240 kg Driving license category: C1/3 Special features: Rotating work basket, basket arm, swivel angle, WITHOUT roof protection, advantage: power connection in the basket, loading area with tailgates, van body, enormous lateral reach, setup and driving-in automation, greatest reach on a 7.5t chassis. Information: TÜV und UVV new

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, machine/vehicle number: 1159, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,700 mm, number of slots in tool magazine: 40, swivel angle A-axis (min.): -105 °, swivel angle A-axis (max.): 105 °, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Placing a bid is binding and obligates the buyer to collect the machine within the specified period: July 28, 2025, to July 31, 2025. Machine includes approx. 90 tool holders TECHNICAL DETAILS Travel Range X-axis: 4,000 mm Travel Range Y-axis: 1,200 mm Z-axis Travel (horizontal): 1,700 mm Z-axis Travel (vertical): 1,690 mm Rapid traverse: 30 m/min Swivel Head and Axis System Swivel Head: Two-axis universal swivel head, continuously adjustable in both axes simultaneously Clamping: Axes can be hydraulically clamped via M-function A-Axis Working Range: ±180° Torque without clamping: max. 1,750 Nm Torque with clamping: max. 2,500 Nm Direct measuring system: ±3″ B-Axis Working Range: ±180° Torque without clamping: max. 4,200 Nm Rsdpfx Amowu E Ezjaou Torque with clamping: max. 12,000 Nm Direct measuring system: ±5″ Spindle Speed range: 20 – 8,000 rpm Power at 40/100% duty cycle: 33/24 kW Torque at 40/100% duty cycle: 382/278 Nm Tool Magazine Number of tool stations: 40 Tool holders included: approx. 50 HSK 100 + 40 HSK 100 in magazine Max. tool weight: 20 kg Tool length: 460 mm Max. tool diameter with adjacent positions occupied: 125 mm Max. tool diameter without adjacent positions: 200 mm Tool change time: approx. 8.5 s Chip-to-chip time: approx. 9.5 s CNC Control Control: Siemens SINUMERIK 840 D-POWERLINE Rotary Table Type: NC rotary table with direct drive Faceplate diameter: 1,900 mm Max. load capacity horizontal (turning/milling): 5,000 kg Circular run-out accuracy: 0.02 mm Flatness accuracy: 0.015 mm over 1,000 mm Rated speed: 180 rpm at 100% duty cycle Total clamping surface: approx. 4,300 × 1,200 mm (excluding full diameter of NC rotary table) T-slots: 11 × 18H7 MACHINE DETAILS Installation dimensions: 8000 x 6000 x 5000 mm Weight: 45 t Transport width: approx. 3,450 mm Transport length: approx. 6,900 mm Loading height: approx. 4,015 mm EQUIPMENT - Two-axis universal swivel head with stepless adjustment - Direct measuring systems in A/B-axis - NC rotary table with direct drive - Siemens SINUMERIK 840 D-POWERLINE CNC control - 40-station tool magazine - Approx. 90 HSK 100 tool holders - Complete documentation The machine can be transported on trucks up to 3,000 mm wide.

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders Redpfofbbtuox Amaju -Stroke: 10 mm -Piston diameter: 63 mm -Piston rod: 16 mm -Price: per piece -Number: 3 pieces -Dimensions: 68/87/H87 mm -Weight: 1.2 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 30 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece Redpfx Amefbclzjaou -Number: 15 pieces -Dimensions: 107/68/H689 mm -Weight: 0.8 kg/piece

Condition: used, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 40 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 4 pieces -Dimensions: 96/68/H68 mm -Weight: 0.9 kg/piece Rjdpfx Ajfbcllemaou

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Imav, hydraulic cylinder with control valve, stroke 950 mm -Valve: type DBV-USY-10 -Piston rod: Ø 40 mm -Mounting hole: Ø25 x 24 mm / Ø20 x 25 mm -Cylinder: outside Ø 60 mm -Dimensions: 1290/180 / H170 mm -Weight: 32.6 kg Rodsgv Di Iopfx Amaeu

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders Rodpfxsf Sl Uye Amaju -Manufacturer: Festo, compact cylinder type ADVU-40-30-PA -Stroke: 30 mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm/M6 -Dimension: 82/60/H63 mm -Weight 0.6 kg.

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: ADVUL-80-280-PA -Piston: Ø 80 mm -Piston rod: Ø 20 mm -Stroke: 280 mm Rodpfsd S Dacsx Amaju -Max. Pressure: 10 bar -Dimensions: 355/105/H105 mm -Weight: 5.5 kg

Condition: used, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 120 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece Rsdpfxjfbclrs Amasu -Number: 2 pieces -Dimensions: 165/40/H40 mm -Weight: kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear unit SEW type: R40VU1 -Manufacturer motor SEW type: DFT71D4 -Motor power: 0.55 kW -Speed range: 21-86 rpm Redpfxecvvywo Amaju -Motor: adjustable -height of the shaft axis: 92 mm -Drive shaft: Ø 25 mm -Number: 2 motors available -Price: per piece -Dimensions: 470/220/H370 mm -Weight: 36 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: ADVUL-80-80-PA -Piston: Ø 80 mm -Piston rod: Ø 20 mm -Stroke: 80 mm -Max. Pressure: 10 bar -Price: per piece -Number: 2 pieces -Dimensions: 105/105/H158 mm Redpfxod S Dage Amaou -Weight: 5.5 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: ADVU-80-60-APA Rsdpfsd S Dalox Amasu -Piston: Ø 80 mm -Piston rod: Ø 20 mm -Stroke: 60 mm -Max. Pressure: 10 bar -Dimensions: 140/105/H155 mm -Weight: 2.3 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: ADVU-50-25-PA -Piston: Ø 50 mm -Piston rod: Ø 16 mm -Stroke: 25 mm -Max. Pressure: 10 bar Rodped S Dadefx Amaju -Price: per piece -Number: 2 pieces -Dimensions: 78/72/H72 mm -Weight: 0.7 kg

Condition: used, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp Rjdpfx Amsfbclpsaou -Stroke: 10 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 5 pieces -Dimensions: 80/68/H68 mm -Weight: 0.65 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders Redoiiwgfspfx Amaeu -Manufacturer: Festo, compact cylinder type ADVU-40-20-A-P-A -Stroke: 20 mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm / M10 x 1,25 -Dimension: 94/60/H60 mm -Weight 0.6 kg.

Condition: good (used), Adjustable geared motor, variable speed geared motor, electric motor -Motor power: 5.5 kW Redpfeb Drppsx Amaou -Speed range: 15 to 90 rpm -electrically adjustable -Drive shaft: Ø 40 mm -Design: B3 -Protection rating: IP54 -Dimensions: 600/700/H270 mm -Weight: 130 kg

Condition: good (used), Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve Rodpfx Asxvyn Romaou -Manufacturer: Festo, valve manifold -Solenoid valves: VUVS-L20-M52-MD-G18-F7 10 pieces -Solenoid coil: VACS-C-C1-1 -Connection block: VABM-B10-20E-G38-10 -Individual components: see photos -Price/Sale: complete -Dimensions: 320/145/H100 mm -Weight: 4.6 kg

Condition: good (used), Pneumatic cylinder -Manufacturer: Festo -Type: ADVUL-80-80-PA -Stroke: max. 80 mm -Max.: 10 bar -Price: per piece -Number: 26x available Rjdpfx Amscnl Smsaou -Weight: 0.3 kg