Used Vem Bevel Gear Milling Machine for sale (69,442)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 15,000 rpm, controller model: Heidenhain TNC430 PA, Submitting a bid obligates you to collect the machine on time, during calendar week 25! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,000 mm Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Rapid traverse rate X-axis: 20 m/min Rapid traverse rate Y-axis: 20 m/min Rapid traverse rate Z-axis: 20 m/min Spindle speed (max.): 15,000 rpm Torque: 57 Nm Spindle power: 18 kW Work table (L x W x H): 4,500 x 2,000 x 400 mm T-slots, lengthwise: 18H12 Distance between T-slots: 250 mm Tool interface: HSK 63 F Tool clamping: hydraulic MACHINE DETAILS Control system: Heidenhain TNC430 PA Type of input current: Three-phase Power requirement: 20 kW Frequency: 50 Hz Voltage: 400 V Fuse rating: 63 A Podpfx Aey Sxkrentjpt Dimensions & Weight Machine footprint without control cabinet (L x W x H): 6,000 x 3,500 x 4,050 mm Total weight: 15,000 kg EQUIPMENT Spindle speed infinitely adjustable Tool changer TT140 measuring probe Note: Machine without enclosure. The zero-point clamping plates and other accessories shown in the pictures are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 108/1008-3, functionality: fully functional, power: 4 kW (5.44 HP), total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, overall weight: 750 kg, workpiece width (max.): 180 mm, number of spindles: 2, TECHNICAL DETAILS Number of spindles: 2 Ppsdpfsy Tnitox Antjt Max. workpiece width: 180 mm MACHINE DETAILS Main motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,750 x 1,500 x 1,450 mm Net weight: 750 kg EQUIPMENT CE marking

Condition: good (used), max. wheel diameter 1600 mm gear width 250 mm max. module 30 min. module 8 range of tooth size 58 mm tooth width 250 mm weight of the machine ca. 42,3 t dimensions of the machine ca. 4,45 x 6,00 m - Cone spacing in mm. for spiral angle 30° minimum: 150 maximum: 800 - Taper angle, in degrees minimum: 5 maximum: 85 - Tooth angle minimum: 0° maximum: 45° - Number of teeth to be cut Ppsdpfxsu Dbuce Antjt minimum: 10 maximum: 150 The machine is complete, fully functional and in good condition. Equipment / accessories: - complete set of change wheels - 4 pcs. cutter heads - various milling cutters - Operating instructions in English

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Podpfx Ajyf A H Nontjpt Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GEAR HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: Pjdpfx Ansy A Nglstspt -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5.

Condition: used, Year of construction: 2001, functionality: fully functional, wheel diameter: 350 mm, gear diameter: 400 mm, wheel width: 50 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 600 rpm, workpiece weight (max.): 1,020 kg, total height: 3,048 mm, total length: 3,658 mm, total width: 2,590 mm, feed length X-axis: 440 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 10 m/min, rotational speed (min.): 600 rpm, pivoting range: 80 °, rotational speed (max.): 6,000 rpm, spindle bore: 80 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, travel speed (max.): 10,000 mm/min, workpiece diameter (max.): 400 mm, We offer this used Gleason-Pfauter P400G (400mm/800mm) CNC gear grinder machine, year of construction 2001. Type: Gear Grinders Model: P400G Brand: GLEASON PFAUTER Stock Number: GH1076 Serial # 28-727 Condition: Used Year: 2001 Description: Gleason Pfauter Model P400G 5-Axis CNC Gear Grinder Maximum Workpiece Diameter: 400 mm/800mm / 15.74”/31.48" Maximum Grindable Profile Depth: 35 mm / 1.37” Maximum Grinding Wheel Diameter: 350 mm / 13.77” Maximum Grinding Wheel Width: 50 mm / 1.96” Diameter of the Spindle Journal for Retaining: 80 mm / 3.14” X-Axis Travel (Radial): 440 mm / 17.32” Y-Axis Travel (Tangential): 200 mm / 7.87” Pjdoyuqrrepfx Antspt Z-Axis Travel (Axial): 400 mm / 15.74” Maximum Grinding Head Pivoting Angle (+A-A): +/- 40° Maximum Table Load: 10 kN / 2,248 Lbs. Worktable Diameter: 380 mm / 14.96” Worktable Bore: 80 mm / 3.14” Tailstock Travel Distance: 650 mm / 25.59” Tailstock Locating Bore: 90 mm / 3.54” Feed and Rapid Traverse Rate (X-Axis): 10,000 mm/min / 393.70 IPM Feed and Rapid Traverse Rate (Y-Axis): 5,000 mm/min / 196.85 IPM Feed and Rapid Traverse Rate (Z-Axis): 10,000 mm/min / 393.70 IPM Tool Speed (Spindle-S): 600 to 6,000 RPM Worktable (C-Axis): 0 to 32 mm/min / 0 to 1.25 IPM Dresser Travel Distance (Z2-Axis): 200 mm / 7.87” Dresser Feed and Rapid Transverse (Z2-Axis): 5,000 mm/min / 196.85 IPM Dresser Spindle Speed (Spindle – S2): 3,000 to 6,000 RPM Maximum Dressing Wheel Diameter: 150 mm / 5.90” Approximate Machine Dimensions: 144” LR x 102” FB x 120” Height Approximate Filtration System Dimensions: 72” LR x 136” FB x 99” Height Approximate Control Cabinet Dimensions: 42” LR x 72” FB x 88” Height If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2008, functionality: fully functional, Elumatec 130 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. Travel distance X-axis: 4200 mm Max. travel Y-axis: 480 mm Podjy U Dtqepfx Antept Max. travel range Z-axis: 325 mm Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying Bidirectional angle head and a high-speed spindle Wrench measurement 8 pneumatic material clamps Light barrier Very good condition

Condition: used, Year of construction: 1999, x-travel 1250 mm y-travel 850 mm Pedpfsy Ty R Ajx Antopt z-travel 800 mm Control Heidenhain MillPlus

Condition: used, Year of construction: 2007, x-travel 200 mm y-travel 200 mm Ppsdpfoy S Eczsx Antjt z-travel 400 mm Control Siemens 840 D total power requirement 84 kW weight of the machine ca. 19 t dimensions of the machine ca. 7,9 x 6 x 2,7 m

Condition: good (used), Year of construction: 2003, x-travel 500 mm y-travel 500 mm Ppjdey Raluopfx Antet z-travel 420 mm Control Heidenhain / Millplus total power requirement 35 kW weight of the machine ca. 5,7 t

Condition: used, Year of construction: 2001, x-travel 560 mm y-travel 460 mm z-travel 450 mm Control OSP U10 M Podpfjyi Hv Nox Antjpt total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. Pedpfxjtmrkro Antopt -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, Machine manufactured basically in 1990 and retrofitted by REM in 2021 CNC - Heidenhain TNC 320 Z axial slide travel mm 950 Y head vertical travel mm 2.000 Ppodsn D N H Tjpfx Antjt X transversal travel mm 6.000 2-spindle head Spindle taper ISO50 with device for automatic locking and unlocking Head rotation 360°, 1000/4000rpm Head dimensions mm 290x290 Motor power of the spindles c.c. kw. 15 Approx. net weight machine ton. 32

Condition: used, Year of construction: 1982, functionality: unexamined, input current: 75 A, input frequency: 50 Hz, overall weight: 8,400 kg, We offer this used VEM ZFWZ 3150/3 gear hobbing machine, year of construction 1982. Type designation: ZFWZ 3150/3 Serial number: 2-4386/1 Year of manufacture: 1982 year Operating voltage: 380 V Operating frequency: 50 Hz Control voltage: 220 V Control frequency: 50 Hz Signal voltage: 20 V Signal frequency: 50 Hz Supply fuse rating: 200 A Connected load: 35 kW Control fuse rating: 10 A Rated current: 75 A Mass: 8400 kg Ingress protection: 44 IP Ambient temperature minimum: 5 °C Ambient temperature maximum: 35 °C Here is the technical specification of the WMW MODUL ZFWZ 3150 / 30 gear hobbing machine. 1.Capacity • Maximum gear diameter (without counter column): 3,150 mm (generally supports up to 3,200 mm) • Maximum gear diameter (with counter column): 1,600 mm • Minimum gear diameter: 500 mm • Maximum module: 30 mm • Maximum gear width (face width): 1,000 mm • Maximum helix angle: ±45° 2. Work Table • Table diameter: 2,400 mm • Table bore diameter: 500 mm Ppjdpjy Ug Drefx Antjt • Table bore depth: 1,100 mm • Maximum table load capacity: 30 tons 3.Hob Cutter & Feeds • Maximum hob cutter diameter: 350 mm • Maximum hob cutter length: 440 mm • Tangential shifting distance: 500 mm • Hob speed range: 12.5 – 71 RPM • Feed rates: o Axial feed: 0 – 16 mm/rev o Radial feed: 0 – 7.1 mm/rev o Tangential feed: 0 – 8.0 mm/rev 4.Dimensions & Weight • Overall dimensions (L x W x H): Approx. 6,700 × 5,400 × 4,800 mm • Total machine weight: Approx. 65,000 kg (65 tons) If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Catalogue number 7758 TECHNICAL DATA Circular Saw: - max saw blade diameter 350mm - spindle 30mm - lockable spindle - blade adjustable front/back, up/down, angle - blade guard - motor 1.1kW - extraction port diameter 80mm Milling Machine: - tenoning spindle: - spindle diameter 40mm - spindle working height 150mm - lockable spindle - max cutter diameter 350mm - 2 spindle speeds: 3000, 4500 rpm - motor approx. 5.5kW - brake - side carriage – manual feed - carriage dimensions (L/W): 1180x600mm - mitre fence - pneumatic clamp - extraction port diameter 125mm Ppsdpfxezaa Tvj Antet - dimensions L/W/H: 1750/2600 (for transport: 1200)/1400mm - weight 715kg ADVANTAGES – German-made – very good condition – used tenoner Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: good (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,600 mm, Base machine / travel paths X = 4,000 mm, Y = 1,600 mm, Z = 1,600 mm. The machine can be installed on the shop floor. The machine features a stable flat bed for fast and precise movement of the machine table in the X direction. Hardened, rolled compact guide rails, 1,200 mm guide rail width, and a rack and pinion drive with two electronically pre-tensioned servo motors ensure accuracy and dynamics. The machine table is designed as a steel welded construction with rolled compact guide rails. Liquid-cooled feed drives, two measuring systems, and telescopic steel guards ensure precision, constant temperature, and protection against chips and coolant. The spindle headstock slide and spindle headstock are made of GGG 60 and are stably guided via long guide rails. The twin-spindle drive is via two vertical ball screws with separate drives, measuring systems and CNC axes. Feed rate / rapid traverse: 2–30,000 mm/min, acceleration: 3.5 m/s². Direct, non-contact linear measuring systems ensure high manufacturing accuracy. Automatic universal milling head Diagonal milling head 45° with C and A axes, positionable to 0.01°, liquid-cooled, GGG-60 cast iron construction. C-axis ±180°, A-axis ±360°, separate axis drives, helical gearing with ±3 sec indexing accuracy, hydromechanical tool clamping and internal and external coolant supply. Drive via frequency-controlled, liquid-cooled main motor. Electrical system / power supply Electrical equipment according to EN 60204, 400/230 V, 50 Hz, fuse rating 160 A slow-blow, control voltage 24 V, connected load approx. 80 kVA. Protection class IP54 for control cabinet, motors and drives. Control cabinet cooling with closed two-chamber system. Compressed air connection 6 bar, G 1". Energy-saving mode with standby function and power consumption under 1 kW. Equipment Heidenhain TNC 640, electronic handwheel HR 510, operator panel support 2 x 800 mm, remote diagnostics via network or SIM card. Lubrication depending on the component via pulse central lubrication, grease, oil mist and grease lubrication. Painting in RAL 7016, RAL 7004 and RAL 7035 with green-yellow accents. Installation / clamping technology TightBlock substructure for flush floor installation with high mass for damping and customer-specific arrangement of fixators. Clamping plate DIN 876/2, 2,000 x 2,000 mm, T-slots 22 H12, spacing 250 mm. CNC rotary table Ø2,000 mm, 15 t load capacity, centering bush Ø100 H7, radial run-out 0.010 mm, axial run-out 0.025 mm, speed 5 1/min. Psdpfxjy Uktws Antopt Tool and coolant system ToolCenter for 48 tools with simultaneous loading, double gripper, automatic loading flap and approx. 10 s tool change time. Max. tool Ø125 mm, with free adjacent slots Ø250 mm, length 500 mm, weight 25 kg. Coolant system 950 l with paper band filter, filter fineness < 50 µm, high-pressure pump 40 bar / 32 l/min and washing gun. Main drive / safety Liquid-cooled AC main drive directly on the milling head: 50 kW at 100% duty cycle, 75 kW at 40% duty cycle. Speed 10–6,000 1/min, torque 802 Nm or 1,204 Nm. Tool holder SK 50 BIG-PLUS, draw-in force 20 kN. SHW UniScan for 3D crash and vibration monitoring as well as machine diagnostics. Additionally: laser tool measurement, wireless measuring probe Renishaw RMP 60 Q, operating mode 3, 3-sided splash and chip guard, safety access, cladding panels, longitudinal grating and hinge belt chip conveyor.

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm Pedpfx Aney Uxq Dotept - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES – Polish manufacture – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 2292.56 € 10 mm B 16 220 mm 250 - 3000 U/min 0,45 kW 320 mm 520 mm 820 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Ppjdpfx Aney Hf Rbstet Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Art. - No. 217.400 with drill head height adjustment OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 3649.63 € Ppodpfey Hf Nwox Antjt 15 mm MK 2 220 mm 40 - 4000 U/min 0,75 kW M12 400 mm 520 mm 850 mm 65 kg 70 mm 85 - 370 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 15/18 (in E335/ST60) 17 Nm Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic Drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package (vice & keyless chuck)

Condition: used, Year of construction: 1995, functionality: fully functional, travel distance X-axis: 6,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 10 rpm, table width: 1,000 mm, table length: 8,000 mm, CNC Bed Milling Machine Zayer MF3 8000 CNC For sale: bed milling machine from the well-known manufacturer Zayer, model MF3 8000 CNC, production year 1995. The machine is designed for machining large and long workpieces, ensuring high precision and rigidity. Psdpsyw N Raefx Antept Technical specifications: Travels X/Y/Z: 6300 x 1100 x 1500 mm Table size: 8000 x 1000 mm Spindle speed: 10 – 1800 rpm Spindle power: 18.5 kW Spindle taper: ISO 50 CNC control: Heidenhain TNC 320 Universal milling head: 360° swivelling Machine in very good technical condition, ready for operation.

Condition: new, I sell, milling machine new. Psdpfx Asuuiytentjpt

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots Ppedeyrhb Sepfx Antot The machine is complete, in good technical condition, and shows normal signs of use.

Condition: excellent (used), For sale: Industrial deburring machine from the German manufacturer Rolei Eisenblätter GmbH, model PEF 500. The device is designed for precise deburring, chamfering, and edge preparation of steel, aluminum, and other metallic workpieces. Ppodpfx Answ R E Hpjtot Manufacturer: Rolei Eisenblätter GmbH, Germany Model: PEF 500 Robust steel construction V-shaped work table—ideal for guiding components Electric drive with safety switch Application: edge processing, chamfering, weld seam preparation, and the removal of burrs after cutting and machining The machine is fully functional and in good technical condition. Extremely stable construction, ideal for workshops, metalworking shops, toolrooms, and series production.

Condition: like new (used), For sale is a used Felder F-900 Z milling machine with a dovetail and T-slot table length of 1300 mm. The machine is used as an exhibition model in our showroom and is therefore in like-new condition. Technical data: - 5 milling speeds - Milling spindle swivels 90° - 45° Pjdpfsw Hfd Ijx Antept - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Dovetail and T-slot table 1300 mm - Electrically adjustable in height + swiveling "PowerDrive" - Motor power 7.3 kW / 9.9 hp, soft start - Year of manufacture 2025 The machine is located in A-8561 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, milling Reference: R-D1618

Condition: used, Year of construction: 2018, machine/vehicle number: Q4A181101, SIEMENS SINUMERIK 828d control system, travel ranges X/Y/Z = 350/250/300 mm, weight 2,030 kg, RITTAL control cabinet, 24-position tool changer SK30, rigid tool clamping plate, chip conveyor KABELSCHLEPP, coolant system. Ppedpfxey U R Rcj Antot