Used Wpa Wpa Biochrom Biowave Uv/Visible Spectrophotometer for sale (2,120)

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm Nwodpfxevupdce Akfjf - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Condition: used, for installation on an existing bar conveyor. Nwedpsumvqcjfx Akfof Includes: casing with 2 tubes, exhaust fan and control cabinet. Without conveyor

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. Nwjdpou S N R Ejfx Akfef - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right Nodpfxoxn Nlvs Akfewf - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.*

Year of construction: 2008, condition: used, machine/vehicle number: A0807010-0400, Technical data: - Manufacturer: Venjakob - Type: H (UV) - Working width: 1,300 mm - Length: 2,500 mm - Total width: 1,510 mm - Feed speed adjustable via frequency converter - Frequency converter not included in delivery - Conveyor belt suitable for ambient temperature up to approx. 120°C - Height: 900 ± 50 mm - Motor power: 0.75 kW - Motor ATEX-compliant - Belt control: pneumatic - Max. load: 70 kg/m Njdpsyh Hu Tefx Akfewf - Colour: RAL 7035 light grey - Voltage fluctuations: +/-5% - Location: in stock

Condition: used, Year of construction: 2008, - Producer Printworld - Type PUVD 1600-2 - Year of construction 2008 - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt - Feed speed adjustable 2 - 50 m/min - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location - Voltage / HZ 400 / 50 Nwsdpfxsumvkcj Akfof

Condition: used, Year of construction: 2016, machine/vehicle number: 9960-10-1059, techncal data: - Producer: Printworld - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated Nsdpfxju Abn Ts Akfowf - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A - Location: on stock

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST, Model: LIGNOCURE HL 140-4-N-DL Year: 1999 (1990) POLYMERIZATION SYSTEM Consisting of 2 UV dryers: Dryer 1 Total length: 2100 mm Total width: 2339 mm Nwodpfxeyalc No Akfjf Workpiece dimensions: min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: per lamp 80 W/cm² Length of irradiation: 1400 mm Lamp output: 2 x 11.2 kW Air-cooled housing, capacity: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Conveyor belt Vanjakob, Year: 1999, Type Novo 40 Length: 2100 mm Working width: 1300 mm Working height: 880 - 920 mm Feed drive: 0.75 kW Feed speed: 4 – 20 m/min (Line 2 - 4m/min) Dryer 2 Total length: 3340 mm Total width: 2339 mm Workpiece dimensions: min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: per lamp 80 W/cm² Length of irradiation: 1400 mm Lamp output: 2 x 11.2 kW Air-cooled housing, capacity: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Conveyor belt Vanjakob, Year: 1999, Type Novo 40 Length: 3340 mm Working width: 1300 mm Working height: 880 - 920 mm Feed drive: 0.75 kW Feed speed: 4 – 20 m/min (Line 2 - 4m/min) Shared control cabinet for both drying tunnels: 2000 x 1600 x 600 mm Operating voltage: 400 V, AC, 50 Hz, 3-phase Total output of the complete UV system: approx. 50 kW Operating side of the system: left Total weight of the complete system: approx. 2500 kg (Subject to changes and errors in the technical data, as well as prior sale)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, laser power: 20 W, UV Laser Engraving Machine with 20 Watt Laser Power - Laser source with 355nm wavelength / 20 Watts Demonstration machine, with minimal operating hours (approx. 15 hours) - incl. Windows 64-bit PC system Nodpfx Asflrnaekfswf - incl. 22" monitor - everything fully installed and calibrated - Engraving software in German - 3D software (MM3D) - very easy to operate - switch on and start working - UV laser source with 20 Watts for high-contrast and fast marking with extremely high resolution - suitable for engraving almost all metals (stainless steel, brass, aluminium, etc.) - suitable for engraving almost all plastics (including PVC, silicone, etc.) - suitable for engraving real glass (including crystal glass) - capable of cutting real glass - heavy-duty industrial quality - complete system / ready for immediate use - working area approx. 500 x 600 x 600 mm (W x D x H) - clamping surface with threaded inserts on a 50 mm grid - LED workspace lighting - 50 mm duct connection for fume extraction - Engraving area approx. 150x150 / 200x200 / 300x300 mm (switchable) - 3D scanner for marking surfaces of any shape - incl. foot pedal to start the engraving process Sale to businesses only. Delivery / consulting / sales only within Germany / Austria / Switzerland. Please also ask about our attractive leasing/financing options. Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Condition: like new (used), Year of construction: 2022, For sale: EXILE prepress system – complete set: CTS imaging unit and UV LED exposure cabinet. Devices from mid-2022. Printhead replaced in 2025. After that, used very little. 1. Computer to Screen – EXILE Spyder II DTS 30″ • Serial number: 900 100523/182 • Production date: 07/2022 • Version: DTS 30″ • Pin registration: MHM Nwodpfx Akexb Ru Esfof • Included: 1× Screen Drum • New printhead: 2025 2. Exposure cabinet – EXILE V LUX UV LED Exposure Cabinet • Serial number: 450 • Production date: . RIP software • SCREENMAKER RIP Kit (for Windows systems)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, number of ink cartridges: 6, total length: 1,700 mm, total width: 3,100 mm, total height: 1,300 mm, type of input current: three-phase, overall weight: 760 kg, working width: 1,600 mm, energy consumption: 4 kWh, product height (max.): 100 mm, table length: 1,000 mm, table width: 1,640 mm, Equipment: cooling unit, documentation/manual, Large Format Flatbed LED UV Printer The SIGNRACER 1610 is a reliable and versatile flatbed printer designed for industrial-grade production. Equipped with either Ricoh Gen.6 printheads, the printer offers excellent adhesion on various substrates, making it an ideal choice for printing on both dark and transparent surfaces in a single pass. Its LED UV curing system offers variable power levels and is air-cooled, providing a long lifespan and excellent performance. With its high-quality construction and advanced features, the SIGNRACER 1610 is a top choice for a range of industrial printing applications. It is ideal for producing high-quality graphics on both dark and transparent surfaces with its White and Gloss inks, in addition to CMYK process colors. Its ability to print on rigid and flexible materials such as PVC boards, Aludibond, PS, PP, Acrylat, PET-G, and Glass makes it perfect for printing signs, displays, and exhibition graphics. Ricoh's smaller drop print heads are suitable for special applications that require higher precision, such as watch faces and industrial components. Signracer also develops its own waveforms and inks, allowing for even higher print output and top quality at maximum printing speeds without compromise. This ensures a perfect match between our ink formulations and waveforms, especially in grayscale printing. Specifications Printhead - Ricoh Gen.6 Printhead Count - 4 Printbed Size - 1600 mm x 1000 mm Carriage Speed - Ricoh Gen.6: 1.26 m/s Vacuum Table - 2 Honeycomb zones with registration pins Dimensions (H x W x D) - 1300 mm x 3100 mm x 1700 mm Weight - 760 kg Energy Consumption - 4 kW Max. Media Width - 1640 mm Max. Print Width - 1600 mm Nwsdpfxounw Eqo Akfjf Media Type - Rigid and flexible (PVC Boards, Aludibond, PS, PP, Acrylat, PET-G, Glass) Media Thickness - Maximum 100 mm Curing System - LED UV with variable power levels LED UV Lamp - 90 mm / 14 Watt/cm2 Color Configuration - CMYK + White + Varnish Ink Consumption - Ricoh Gen.6: 8 ml/m2 Draft (4 passes, 600x900 dpi) 26 m2/h Production (6 passes, 600x900 dpi) 20 m2/h Quality (9 pass, 600x900 dpi) 15 m2/h

Year of construction: 2017, condition: excellent (used), machine/vehicle number: 26616, Equipment: CE marking, The Hapa 237-Hybrid is a modular UV printing system that combines the economical features of flexo technology with the full flexibility of digital Drop On Demand printing. Operating Roll to Roll, the system can print on a wide range of roll-fed substrates including aluminum foil, paper, PVC, medical paper, and Tyvek. Utilizing UV-cured inks, it is ideally suited for pharmaceutical applications. Conversion and installation of PPS is possible. - Print today, use tomorrow - Serve multiple lines with one machine - Print complete artwork including variable data - Overprint partially pre-printed foils Nsdpfeyr Imbox Akfewf - High speed - Compact footprint - User-friendly operation - Integrated edge and tension control - Leaflet printing with GUK connection possible Technical Data Sheet: (See Images - 3 pages)

Condition: like new (used), Year of construction: 2019, operating hours: 66 h, functionality: fully functional, Size 60 x 75 cm, Presscenter XL 2, program-controlled wash-up device for inking rollers, blanket wash, and impression cylinder wash, Alcolor Vario dampening system, Combistar air-cooled cooling and recirculation unit, Autoplate, antistatic device in the feeder, double sheet detector, Weko AP 262 powder spray unit, AMS LED UV dryer, maximum paper thickness 0.8 mm, maximum speed 15,000 sheets/h, perfecting 2-3 or 5- Nwodpfoykr Rzox Akfef

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Nsdpfx Akoytr Swsfswf Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: used, Year of construction: 1988, machine/vehicle number: 1743, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer Gula Speed CGS JKN 112Year 1988 - Serial-No. 1743 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board Online-Video-Inspection by Skype-Video Nodpfxeh Axqus Akfowf We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1982, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV-112Year 1982 - Serial-No. 9035 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card boardUV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Nedjh Ayfpopfx Akfjwf Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2022, condition: used, This is an Ultravent hood from the manufacturer Rational, model UV 61/101/E/CD, year of manufacture 2022. It is suitable for iCombi Classic and iCombi Pro units of the following index series: Index H and I, and can be used for both DUO units and single units. The hood has been inspected in our in-house workshop and is fully functional, including the appropriate connection kit. The original retail price (net) of the hood is €5,135. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging a certified Rational customer service provider. Are you looking for a specific Rational model? Contact us – we have access to an extensive range of used and new equipment. We are happy to advise you on all model types. Our used equipment service for you: • 6-month warranty on electrical components, limited to the replacement of defective parts; installation and removal costs not included • High-quality branded equipment at fair prices • Professional refurbishment / inspection & expert cleaning • Inspected & fully functional – or your money back • Shipping or collection available by arrangement • Expert advice – before and after your purchase • Provision of operating manuals, wiring diagrams & spare parts • DGUV V3 safety inspection conducted Technical Data: • W x D x H: approx. 854 x 970 x 313 mm • Serial number: ET1UA22095059679 • Year: 2022 • Power supply: V: 200 - 240 / Hz: 50-60 • Weight: approx. 95 kg Condition: Used, tested, fully functional Shipping: • Delivery or collection by arrangement • Worldwide shipping available on request Nsdpeyhmw Defx Akfowf • Shipping to islands or mountain stations only by arrangement Subject to change and error. Do you have any questions, need advice, or would like to view the equipment onsite? You can reach us by phone during our business hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively based on our General Terms and Conditions (GTC).

Condition: repair required (used), Year of construction: 2017, operating hours: 15,939 h, functionality: limited functionality, machine/vehicle number: R678B751, number of ink cartridges: 8, color channels: CMYK, number of print heads: 2, I am offering for sale a flatbed plotter Mimaki JFX200-2513. Working area: 1300x2500 mm 2 print heads Currently, the machine is loaded with 2xCMYK; conversion to CMYK+W+C is possible. Low usage: 4916 m2 Njdpoxzpvzsfx Akfewf The machine has mechanically damaged print heads. Printing is possible, but banding starts to appear relatively quickly.

Condition: new, Year of construction: 2025, functionality: fully functional, 120cm Endless UV LED Digital Scan Camera CCD Visual AI Printer Scan and print at the same time - no more stencils - any application - different images at the same time - enormous speed advantage Material width: 1200mm ENDLESS LENGTH due to conveyor belt Material height: 150mm (higher passage possible on request) Recommendation 3x Ricoh Gen5 for CMYK + white ( indicated price ) 4x Ricoh Gen5 for CMYK + white + varnish ( surcharge approx. 3500 Euro ) Including vacuum table Inclusive conveyor belt Including operator computer Including CCD Visual AI camera system Depending on the number of heads 12 - 40sqm/h or more With 2 heads approx. 12sqm per hour possible Nwedpet E Dk Uofx Akfsf Machine dimensions: 2060mm x 2700mm x 1300mm Weight: approx. 500kg + pallet Machine power: 4500W

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer digital flatbed printer - replaces the common laser printers - also color prints on glass, wood, textiles, plastic, metal and many other materials Nwedpfx Akod Ewzijfsf New model: UV4060 Print head: Epson TX800 2690 dpi max. Including software for printer and image processing Dimensions: 800*858*566mm weight: 70kg 360 degree use possible on request: for bottles and round objects A3 size 31x55cm and 23cm height possible 5x500ml paint can be supplied (extra charge) Software setting and printer explanation gladly if required. Germany/Europe-wide. (Surcharge) Print videos etc. can be sent by Mail/WhatsApp.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: DT1UE18105029734, This Rational Ultra Vent Hood for Rational combi steamers, including connection kit, is suitable for combi steamers CMP, SCC 61/101 electric, from model year 2011 to current (Index H+I). The hood was tested in our in-house workshop and is fully functional. The hood has dents and scratches on one side panel due to improper transport. This does not affect the function of the hood, but for this reason, we are offering it at a special price. The RRP for this Ultra Vent Hood is €3,696 net. Service: We are happy to assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance type? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all device types. Our used equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • Professional overhaul / inspection and expert cleaning • Tested & fully functional—or your money back • Flexible delivery or self-collection options • Expert advice—before and after your purchase • Provision of user manuals, wiring diagrams & spare parts • Inspection in accordance with DGUV V3 This Ultra Vent Hood features patented condensation technology, which binds and channels vapours and steam. Complex exhaust installation measures are a thing of the past. An external connection is not required at all. Installation is simple and even possible retrospectively. Technical Data: Nedpewd Ixcsfx Akfowf • W x D x H: approx. 854 x 1226 x 470 mm • Power supply: V: 230 / Hz: 50-60 • Weight: approx. 55 kg • Serial number: DT1UE18105029734 • Year of manufacture: 2018 Condition: used, fully functional Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement • Subject to change and errors excepted Do you have questions, would you like advice, or wish to view the item on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively in accordance with our general terms and conditions (GTC).

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: MDY2310/110, DY2310/014, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Nwjdpeym Rdlefx Akfof Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: MY2001/012, Y2001/019, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Nwjdpfxeym N Nms Akfef Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Condition: used, Year of construction: 2022, Operational condition. 2 units available. Njdowctn Hspfx Akfowf Ask for additional information!

Condition: excellent (used), / / Nwodpoud Ilrsfx Akfjf / /