Used Zopf Section Bender for sale (3,141)

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! Nsdexu Dxqopfx Ahnolf *

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Nsdpou Ickyefx Ahnjlf Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: as good as new (ex-display), Year of construction: 2026, Horizontal Bending press Zopf - model T 200 - year of construction 2026 Nsdpfxsdy Igzs Ahnslf - demo model - length of stroke 185 mm - weight 450 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke demo model

Condition: new, Year of construction: 2026, tube bender R2 ZOPF - without bending tooling - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling Njdpfxodkxkxs Ahnelf - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 400 V 50 Hz 3 ph. - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 60 mm - max. Bending angle of 210 °

Condition: as good as new (ex-display), Year of construction: 2026, Horizontal bending machine T 400 Multi - ZOPF - with semi-automatic control - (99 bending programs each 16 steps) - hydraulic pressure 40 to. - length of stroke 250 mm Njdpfefiqlfsx Ahnolf - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 200x22 mm round tube up to 65 mm

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: BB 60, Tube Bender BB 60 - model BB 60 - capacity up to 60 x 3,6 mm (mild steel) round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 1 - 3 rpm - stepless speed - motor 3 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 - weight 400 kg - 400 volt 50 Hz 3 ph. Nljdpfx Ahed Eywyenjf

Year of construction: 2026, condition: new, flat iron bender Nsdpfxjfmy Ahe Ahnslf model BRT 100 Zopf

Condition: new, Year of construction: 2026, Angle Bar Bender manual Model 100 E German quality Capacity cold (St 37): steel up to 100x6 mm solid round 18 mm Nedpefhdfvofx Ahnolf with length stop with 2 Radius-toolings weight around 27 kg

Condition: new, Year of construction: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roller Shaft diameter: 40 mm Roller diameter: 152-162 mm Nljdpfx Ahjhgiuhjnof Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: new, Year of construction: 2026, Maximum pressure: 20 tons Stroke length: 200 mm Maximum speed: 10mm/sec Return speed: 20mm/sec Work table: 480x1060 mm Working height: 900 mm Oil tank: 10 Liter Maximum workpiece height: 200 mm Nsdpjhgib Nsfx Ahnolf Strip capacity: 200x12 mm Pipe capacity: 48x4.0 mm *not with standard tools - Digital limitation of the stroke and the return stroke. - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.

Condition: new, Year of construction: 2026, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10mm/sec Return speed: 20mm/sec Work table: 660x1250 mm Working height: 900 mm Oil tank: 60 Liter Maximum workpiece height: 250 mm Nedpfx Aehgihkjhnolf Strip capacity: 200x26 mm Pipe capacity: 60x5.0 mm *not with standard tools - Digital limitation of the stroke and the return stroke. - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.

Condition: new, 50 mm 8,5 U/min Nodpsy H N Ikofx Ahnjlf 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x850x1350 mm weight 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400/50 V/Hz hydraulic pump 1,1 kW 80 kN range L-W-H 900 x 600 x 1000 mm weight 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings Nodey H N H Tepfx Ahnslf - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm Nledpsy H N H Hsfx Ahnof engine output 1,1 kW connected load 400/50 V/Hz hydraulic pump 1,1 kW 80 kN range L-W-H 900 x 600 x 1000 mm weight 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles

Condition: new, 80 mm roll diameter 260 mm Nodpfey H N Hyox Ahnolf 7 U/min 170 mm 27 kN 160 mm 450 mm total power requirement 3,7 kW dimensions 980x1430x1600 mm weight 1380 kg Accessories / equipment: - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can bend different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, roll diameter 350 mm 110 mm bending speed 1-5 m/min Bending capacity 157 Wcm³ total power requirement 7,5 kW weight of the machine ca. 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers Nlodpfxoy H N Hge Ahnsf - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW weight 495 kg range L-W-H 1100x850x1100 mm Nljdpfx Aoy H N Hashnef Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage

Condition: new, 200 kN stroke length max. 200 mm working feed 10 mm/sec return speed 20 mm/sec 480x1060 mm work height max. 900 mm toolpiece height max. 200 mm total power requirement 2,2 kW 200x12 mm bending capacity max. - round 48x4,0 mm weight 500 kg Overall size 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm Nlodpfx Ahey H N E Nensf

Condition: new, roll diameter 215 mm shaft diameter 60 mm Shaft revolutions 6 U/min 100x2 mm 80x15 mm pressure hydraulic cylinder 180 kN total power requirement 2,2 kW weight 720 kg dimensions 1200x900x1700 mm Accessories / Equipment: Nsdpfx Ajy H N E Ajhnolf - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.

Condition: new, shaft diameter 60 mm Shaft revolutions 6 U/min roll diameter 215 mm pressure hydraulic cylinder 180 kN dimensions 1125x870x1620 mm weight 820 kg Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical Nsdpfx Ahsy H N Evenelf - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.

Condition: new, Year of construction: 2026, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical Nlsdofkz Rbopfx Ahnef - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: new, Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 800 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 80 to. - length of stroke 300 mm - bending speed adjustable Nsdpfx Ahsd A Nc Dsnslf - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg - bending capacity: flat material max. 300x32 mm at Vmax round tube 3/8" - 3" gas pipe

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 10 h, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Section Steel Laser Cutting Machine Bevel cutting highly enhances competitiveness Smart cutting head equipped with professional Acu3D rotary axis Achieves multi-directional, multi-angle 3D cutting (Web beveling, R-corner cutting, V bevel, Y bevel) Versatile cutting Nsdpfxjw I Ilis Ahnslf Sheet, tube, and section steel cutting in one One-stop processing workflow, seamlessly integrated with TEKLA Easily complete drawing import - nesting & programming - process setup - material alignment - cutting

Condition: new, 500 kN stroke length max. 300 mm working feed 10 mm/sec return speed 20 mm/sec 700x1250 mm work height max. 930 mm toolpiece height max. 250 mm total power requirement 4 kW 200x26 mm bending capacity max. - round 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Nedpfey H N Rlsx Ahnolf

Condition: new, 400 kN stroke length max. 285 mm working feed 9 mm/sec return speed 20 mm/sec 660x1250 mm work height max. 930 mm Nledpfsy H N Nhsx Ahnof toolpiece height max. 250 mm total power requirement 4 kW 200x26 mm bending capacity max. - round 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal