Used Abel Hmd-G-32-0250 for sale (42,098)

Condition: used, fuel type: diesel, Year of construction: 2015, MERCEDES ANTOS 25-32 YEAR 2015 EURO 6 LAMBERET REFRIGERATED BOX WITH INTERNAL DIMENSIONS M10.10X2.60XH2.65 REFRIGERATION UNIT CARRIER SUPRA 1150 WITH TEMPERATURE RECORDER AND MOVABLE PARTITION ATP IN FRC -20°C VALID UNTIL 04/2027 ANTEO RETRACTABLE TAIL LIFT 3,000 KG AUTOMATIC TRANSMISSION WITH INTELLIGENT STEERABLE THIRD AXLE ON-SITE FINANCING OR LEASING AVAILABLE Bjdpfx Apey Slpzorslh

Condition: used, maximum load weight: 31,420 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,750 mm, Year of construction: 2023, Equipment: ABS, 3-axle KA?SSBOHRER food pressure tank 3-chamber 32,000 liters with diesel heating and UNIBLOCK pump First registered 01/ 2023, as good as new Fifth wheel height approx. 1,180 mm Empty weight approx. 7,580 kg VA tank AISI 304 3-chamber with division 12,500 / 7,500 / 12,000 liters Insulation 100 mm glass wool, jacket sheets stainless steel mirror sheet, end floor GRP Pneumatic bottom valves DN80 3 INDIVIDUAL OUTLETS insulated, ending in the rear cabinet with collector 3 = 1 UNIBLOCK food pump type 551M2 stainless steel, electric motor 7.5 kW, with frequency converter Tank diameter 2,000 mm Test foot pressure 3.0 bar Operating pressure 2.0 bar 3x dome cover DN 500 with overflow box Stainless steel cleaning/air line DN50 with microfilter Diesel tank heater EBERSACHER Hydronic 30 kW Stainless steel hose pipes left and right, length approx. 6 meters Chassis stainless steel BPW axles with large disc brakes, 430 mm 1st axle LIFT AXLE KNORR Trailer EBS with stability program RSS Air tank aluminum Tires 6-fold 385/65 R 22.5 BRIDGESTONE Aluminum rims Bjdpfep R Drgex Aprjlh RENT is the new BUYING, also available immediately with us in full-service rental-----

Condition: ready for operation (used), Year of construction: 2003, operating hours: 20,317 h, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, total width: 1,630 mm, total height: 1,920 mm, overall weight: 4,350 kg, controller manufacturer: FANUC, controller model: Series 160i-8, product length (max.): 4,900 mm, number of axes: 8, This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details. • Turning length: 120 mm • Turning diameter: 32 mm Bedpoy E Nq Aefx Aprslh • Axis travels: • X1: 65 mm • Y1: 350 mm • Z1: 120 mm • X2: 265 mm • Y2: 235 mm • Z2: 320 mm • C1: 360° • C2: 360° • Spindle bore: 42 mm • Total power requirement: 34 kVA • Condition: Very good; connected and ready for testing Additional equipment • Set of accessories and tool holders included Technical Specification Counter Spindle No

Condition: used, mileage: 2,01,710 km, power: 150 kW (203.94 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,400 mm, first registration: 03/2021, loading space volume: 4 m³, fuel tank capacity: 70 l, CO₂ emissions: 199 g/km, color: black, number of seats: 5, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, traction control, = Additional options and accessories = - Executive Plus package (DAB receiver, tire pressure monitoring system) - Height-adjustable driver's seat - Comfort seats - LED lighting package (LED headlights, LED daytime running lights) - Leather steering wheel - Alloy wheels (17") - Lumbar support - Multifunctional steering wheel - Navigation package (Apple CarPlay + Android Auto, connected services) - Rear parking sensors - Sliding door on the left side - Sliding door on the right side - Driver alertness system - Automatic headlights - Automatically dimming interior rear-view mirror - Heated exterior mirrors - Passenger airbag - Electric front windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Tinted glass - Hill-hold control - Cornering light - Front center armrest - Multimedia compatible - Fog lights - Rain sensor - Rear window wiper - Start/stop system - Bumpers in body color - System for preventing secondary collisions - Phone with Bluetooth - Adjustable steering wheel - Heated windshield = Further information = General information Number of doors: 5 Model year: 2019 Model code: T6.1 Cabin: double Technical information Torque: 450 Nm Number of cylinders: 4 Engine displacement: 1,968 cc Transmission: 7 gears, automatic Top speed: 203 km/h Dimensions Length/Height: L2H1 Dimensions (L x W): 530 x 190 cm Weights Unladen weight: 2,074 kg Payload: 726 kg GVWR: 2,800 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) Interior Interior: black Environment and consumption Average fuel consumption (WLTP): 6.5 l/100km CO₂ emissions (WLTP): 199 g/km Emission class: Euro 6d-TEMP Maintenance, history and condition APK (Technical Inspection): valid until 03/2027 Number of keys: 2 (2 remote controls) Product safety EU responsible: Volkswagen AG Berliner Ring 2 38440 Wolfsburg, DE Bsdpfx Apoyxdvtjrslh

Condition: ready for operation (used), Year of construction: 2010, Dugard 32 SBP D/E Sliding Head CNC Lathe Machine Type: Sliding Head CNC Lathe Year: 2010 Country of Manufacture: Taiwan Machine Builder - Chiah Chyun Machinery Co. Ltd. Control System -CC Machinery CNC Control Barfeed - Barload Machine Co. Ltd. Machine remains under power in Birmingham Machine was in production at time of inspection Bljdpfxey Tcuwj Aprsh Terms of Sale: Sold EX WORKS Birmingham, UK Supplied with: Tooling as Photographed Machine & Barfeed manauls Swarf Conveyor (Not Pictured) Barfeed For Sale with Jet Machinery Ltd Jet Machinery Stock Number: N/A Machine Serial Number: BC991116 £17,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2011, lifting height: 31,600 mm, fuel type: diesel, color: red, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 31.200 kg Functional Lifting capacity: 1.000 kg Working height: 3.360 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 7,05x3,01x2,87 Production country: NL Additional information Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: G-320DL30 4WDS/N Year of build: 2011 Condition: Used Data: Max. working height: 33,63 m Blodpfey Dpt Iox Aprsh Max. platform height: 31,63 m Lifting capacity: 1000 kg Lifting capacity on extension: 1000 kg Drive type: Diesel Platform dimensions LxW: 6,56 x 2,68 m Platform lenght pushed out: 9,56 m Total dimensions LxW: 7,05 x 3,01 m Transport height with / without railing: 3,62 / 2,87 m Movable up to working height: 33,63 m Ground clearance: 0,21 m Only indoor using: no Own weight: 31.200 kg Special features: white tires, automatic support system, 230V connection on platform, hydraulic supports, 4-wheel steering, all-wheel drive, attachment points for fall protection systems (PPE) available. Information: Function partially given, 2 wheels need to be replaced, PLC control + circuit board defective. Location: 41468 Neuss immediately available

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Bljdpfx Aew Urireprjh

Condition: used, mileage: 74,586 km, first registration: 07/2009, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 02/2027, emission class: euro4, number of seats: 2, Equipment: ABS, crane, Very well-maintained MAN TGL 8.180 fitted with a Cormach 23000 36-3 assembly crane featuring 3 hydraulic extensions, a working height of 32 meters, and a maximum lifting capacity of 1,200 kg. Includes ground control and radio remote control. The vehicle is additionally prepared for platform lift operation. German vehicle from first owner with only 74,500 km. • Cormach 23000 • 32 m – 1,200 kg at 4 m outreach • 30 m – 1,200 kg at 10 m outreach • 28 m – 860 kg at 12 m outreach • 27 m – 640 kg at 14 m outreach • 26 m – 500 kg at 17 m outreach • 23 m – 370 kg at 19 m outreach • 22 m – 270 kg at 21 m outreach • Winch from 2023 Bedpfxsy Nhltj Aprolh • Continuous slewing range • Radio remote control with engine START/STOP function • Work basket available at extra cost • Working height with work basket: 30 m • Side outreach: 21 m (270 kg) and 10 m (1,200 kg) • Differential lock • Self-propelled working machine • German vehicle • From first owner Financing available through our partner banks; we are happy to assist you. We expressly reserve the right to prior sale as this item is also listed on other platforms. Accessory information without guarantee. Subject to change, prior sale, or error. We strongly recommend and offer inspections and testing to ensure buyers have an accurate understanding of condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Condition: excellent (used), Year of construction: 1983, bore capacity in steel (diameter) 32 mm arm length 636 mm workpiece height max. 720 mm spindle turning speed range 38 - 2000 U/min Bjdowvl Irjpfx Aprelh threading 38 - 643 stroke 450 mm spindle stroke - max. 170 mm total power requirement 6 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,5 x 1,5 x 2,2 m Left / right rotation.

Condition: used, mileage: 32,100 km, power: 220 kW (299.12 HP), first registration: 06/2024, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, color: red, gearing type: automatic, total width: 2,520 mm, total height: 2,963 mm, loading space volume: 6 m³, loading space length: 4,200 mm, loading space width: 2,350 mm, loading space height: 600 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), M-Benz Atego 1330K Meiller Tipper VIN: 754954 Chassis / Attachments: * Wheelbase: 3,260 mm * Leaf suspension * Tires: 275/70 R 22.5 * Condition: front approx. 90%, rear approx. 90% * 1 x plastic diesel tank * 1 x AdBlue tank * 1 x Meiller hydraulic tank * Fixed underrun protection * Ball head coupling, support load 150 kg * Hydraulic connections for trailer Cab: * Driver's cab: S Classic Space * 3-seater * Automatic climate control * Radio * AUX, USB * Manual sunroof * Rear wall of cab with window * 2 x rotating beacons Body: * Meiller three-way tipper, year of manufacture 2024 * Dimensions L x W x H: 4.20 m x 2.35 m x 0.60 m * Front wall: 800 mm * Certificate: EN12642 Code XL * 3 x lashing eyes per side Engine / Transmission: * 7,698 cc // 300 HP / 220 kW // EURO 6e * Power-Shift 3 / automatic * Engine brake / High Performance Engine Brake * Differential lock * PTO Weights: * Gross vehicle weight: 13,500 kg * Unladen weight: 6,785 kg * Payload: 6,715 kg Miscellaneous: * German vehicle * 1 previous owner * General inspection * 32,100 km Bsdpfxsy Ngk Uj Aprjlh * Excellent condition New general inspections / safety inspections or weight reductions/increases are possible upon request. We are happy to assist you in obtaining export/temporary plates, and transport of your purchased vehicles within Germany is also possible. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing and typing errors, subject to change, prior sale, and mistakes! ---- Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for clients worldwide. Leible Nutzfahrzeuge’s particular strength lies in the sale of new and used commercial vehicles. On our 11,000 sqm premises, you will find a wide range of vehicles. Our company philosophy is characterized by fairness and professionalism. Since customer satisfaction is very important to us, we offer our clients an excellent all-round service package and provide them with a competent contact person who supports them during the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We are happy to help you load your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Temporary/export license plates We are happy to assist you in obtaining export or short-term license plates. Handling customs formalities We are happy to assist you with customs clearance.

Condition: good (used), Year of construction: 1980, TOS FNGJ 32 Milling Machine Year of manufacture: 1980 Equipped with Heidenhain TNC 135 control With accessories Table size: 800x400 mm Spindle speeds: 40–2000 rpm Longitudinal and cross feeds: 8–400 mm/min Vertical feeds: 4–200 mm/min Distance from horizontal spindle axis to table surface: 125–525 mm Bodpfx Apox U Eb Ajrjlh Distance from vertical head spindle axis to table surface: 58–458 mm X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Bodpfxjy R Tk Ro Aprolh Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Condition: excellent (used), mileage: 4,76,133 km, power: 235 kW (319.51 HP), first registration: 05/1996, fuel type: diesel, tire size: 12.00 R20, axle configuration: 8x4, wheelbase: 4,950 mm, fuel: diesel, color: other, gearing type: mechanical, suspension: steel, permissible axle load (axle 1): 6,500 kg, permissible axle load (axle 2): 6,500 kg, permissible axle load (axle 3): 9,000 kg, Year of construction: 1996, Equipment: electric window regulation, fog lights, = Additional options and accessories = - Side mirrors with electric adjustment - Sun visor - Analog tachometer = Further information = Technical information: Number of cylinders: 5 Axle configuration: Tyre size: 12.00 R20 Brakes: Disc brakes Suspension: Leaf-spring suspension Front axle 1: Max. axle load: 6,500 kg; Tyre tread left: 30%; Tyre tread right: 30% Front axle 2: Max. axle load: 6,500 kg; Steering; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Bledoyyml Hjpfx Aproh Weights: Unladen weight: 13,850 kg Payload: 18,150 kg Gross vehicle weight: 32,000 kg Condition: Technical condition: very good Visual condition: very good Damages: none

Year of construction: 2011, condition: excellent (used), SÄGE SICA TRS/C/SY/U/CNC. 32-250 , PLANETARY TUBE SAW Central clamping for pipe fixing Application: Cutting and Chanfering of PVC, PE, PP PIPES With chip extraction fan Minimum diameter 32mm Max diameter 250mm Year of construction 2011 Machine locations: Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property. Bljdpfx Aeyru Eqsproh

Condition: used, mileage: 32,100 km, power: 220 kW (299.12 HP), first registration: 06/2024, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, color: red, gearing type: automatic, total width: 2,520 mm, total height: 2,963 mm, loading space volume: 6 m³, loading space length: 4,200 mm, loading space width: 2,350 mm, loading space height: 600 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), M-Benz Atego 1330K Meiller Tipper VIN: 754954 Chassis / Attachments: * Wheelbase: 3,260 mm * Leaf suspension * Tyres: 275/70 R.22.5 * Condition: approx. 90% front, 90% rear * 1 x plastic diesel tank * 1 x AdBlue tank * 1 x Meiller hydraulic tank * Fixed underrun protection * Ball-type trailer coupling, support load 150 kg * Hydraulic connections for trailer Cab: * Driver’s cab: S Classic Space * 3 seats * Automatic climate control * Radio * AUX, USB * Manual roof hatch * Cab rear wall with window * 2 x rotating beacons Body: * Meiller three-way tipper, year 2024 * Dimensions L x W x H: 4.20 m x 2.35 m x 0.60 m * Front wall: 800 mm * Certificate: EN12642 Code XL * 3 lashing rings per side Engine / Transmission: * 7,698 cc // 300 HP / 220 kW // EURO 6e * PowerShift 3 / automatic * Engine brake / High Performance Engine Brake * Differential lock * PTO Weights: Blodey Hakpepfx Aproh * Gross weight: 13,500 kg * Unladen weight: 6,785 kg * Payload: 6,715 kg Other: * German vehicle * 1 previous owner * Technical Inspection * 32,100 km * Excellent condition New main inspections / safety checks or payload increases/reductions available on request. We are happy to assist with the procurement of export/transfer license plates, and delivery within Germany is possible. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors, changes, prior sale and mistakes reserved! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the preparation and marketing of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On our 11,000 m² premises, you will find a wide range of vehicles. Our company philosophy is characterized by fairness and integrity. Since customer satisfaction is our top priority, we offer our clients a comprehensive full-service package and provide a competent contact person to accompany them throughout the buying or selling process. See for yourself! Our service for you: Vehicle Loading We are happy to help you load your purchased vehicles. Organization of special transports We are happy to assist with organizing special transports. Temporary / Export License Plates We can assist you in obtaining export or temporary license plates. Customs clearance We are happy to assist you with customs formalities.

Condition: good (used), Year of construction: 2000, functionality: fully functional, pressure: 250 bar, Equipment: documentation/manual, APV Gaulin G132T-3.6P High-Pressure Homogenizer – 15,000 l/h – 250 bar – Very Good Condition For sale is a high-performance high-pressure homogenizer from APV Gaulin, model G132T-3.6P, designed for industrial use in dairy and beverage processing. This machine has been regularly maintained and is in good, fully operational condition. Ideal for applications such as milk, yogurt drinks, and similar products. Technical specifications: * Manufacturer: APV Gaulin * Model: G132T-3.6P * Year of manufacture: 2000 * Capacity: approx. 15,000 l/h * Operating pressure: up to 250 bar * Configuration: 2-stage * Pistons: 3 * Motor power: 132 kW Bledpjytv Iiefx Aproh * Application area: Milk / Yogurt drinks / Liquid products * Electrical control cabinet: included Condition: * Machine is fully functional * Regularly serviced during operation * No known defects * Ready for immediate use after installation

Condition: used, Column Drill Gillardon Type GSB 32 V Machine No.: Year of manufacture approx. 1975 Drilling capacity: 32 mm Taper: MK 4 – long quill Throat: 350 mm Quill travel: 170 mm Table size: 570 x 470 mm Column diameter: 140 mm Spindle speed Motor speed step 1, Belt step 1: 50 – 300 rpm, stepless Spindle speed Motor speed step 2, Belt step 1: 100 – 600 rpm, stepless Spindle speed Motor speed step 1, Belt step 2: 100 – 500 rpm, stepless Spindle speed Motor speed step 2, Belt step 2: 150 – 1000 rpm, stepless Bljdpfjyhf Izsx Aprsh Motor power: 1 / 1.5 kW Power supply: 380 Volt, 50 Hz - automatic feed approx. 0.1 / 0.16 / 0.25 mm/rev, 3 steps - spindle speed via 2 motor speeds, 2 V-belt stages and variator gearbox - adjustable drilling depth stop - table height adjustment via rack and hand crank - tiltable drilling table with angle scale - drill chuck RÖHM Ø 1 to 13 mm - machine lamp Required space (L x W x H): 1000 x 750 x 2000 mm Weight: 470 kg Good condition

Condition: ready for operation (used), * Brand: Derrick Corporation * Type: F36-126D-3DD * Surface: 3200 x 800 mm - 2 Decks * Driving: 1 vibration motor * On stock: 2 pieces Bodpfeywmzcex Aprslh

Condition: ready for operation (used), * Brand: Hein Lehmann Blodpoywmgfjfx Aprjh * Type: LS 1.5-32 DD * Year of manufacture: 1998 - Overhauled in 2019 * Surface : 7600 x 1500mm - 2 decks * Driving: 45 kW E-motor * Weight: 12 Tons.

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm Bjdsu Nm Nispfx Aprslh drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Year of construction: 1992, condition: used, You can check under power, after scheduling an appointment. Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár. TSUGAMI NP-32 CNC Lathe Machine Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Rapid-traverse speed For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Spindle-center height 900 mm Turrets Number of turrets 2 Number of tool-mounting stations 12 (6 stations x 2) Number of rotary-tool-mounting stations 12 (all stations on front and rear turret) Tool sizes Turning tools 16 (square) x 80 mm Bjdsidqvcspfx Aprjlh Drill-holder hole diameter 35 mm Indexing method Random Rotary-tool spindle speed For heavy cutting 224 to 2,240 rpm (stepless) For high-speed cutting 475 to 4,750 rpm (stepless) Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Rapid-traverse speed For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Spindle-center height 900 mm Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Sub-spindle Maximum thread diameter M12 (brass) Machining diameters 8 to 32 mm Spindle stroke (Z2-axis) 215 mm Spindle speed 300 to 3,000 rpm Spindle motor 1.5 kW 4P (inverter) Motors For main spindle 5.5/7.5 kW (AC spindle motor) For attachment drive: Front 0.75kW 4P (inverter type) Rear 1.5kW 4P (inverter type) For hydraulic motor 0.75kW 4P For coolant pump 0.25 kW For lubricating-oil pump 4 W Tanks For hydraulic oil 30 liters For coolant 150 liters For lubricating oil 2 liters Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Freight basis: EXW, unpackaged

Condition: good (used), Year of construction: 1979, functionality: fully functional, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Bodpfx Ajyzxzisprjlh Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm

Condition: excellent (used), Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor Blodpfx Aevvbnpsprjh -Condition: Gear motor is unused -Manufacturer: SEW-Eurodrive, gear motor with brake, parallel shaft gear unit series F -Type: FH87/G DRS132S4BE5HF/TF -Speed: 68 rpm -Power: 5.5 kW -Protection class: IP54 -Hollow shaft: Ø 60 x 280 mm -Brake: 28 Nm -Number: 2x motor available -Price: per piece -Dimensions: 760/335/H530 mm -Weight: 155 kg/piece

Condition: new, 6 GN *1/1 bain marie + heated plate -Dimensions: 2335*1100*900 mm -Related options: Top and alcove decoration -Built-in element CCS3G -Built-in element PCV2G Bjdpfx Apjxwchverjlh -Buffet stand with LED lighting -Glass

Condition: good (used), functionality: fully functional, Adlink MXC-6321D(G) Fanless Embedded Box PC "Function tested; item originates from the decommissioning of equipment from an automotive supplier." Bedoyq R Uljpfx Aprolh Manufacturer: ADLINK Model: MXC-6321D(G) Fanless Embedded Box PC Processor: Intel Core i7-3610QE (QM77) Expansion slots: 3 × PCI + 1 × PCIe x16 Graphics & Displays: 2 × DisplayPort + 1 × DVI-I (supports 3 independent displays) Interfaces & I/O: 2 × GbE, 4 × USB 3.0, 2 × USB 2.0, 4 × COM, 16-channel isolated DIO Memory & Storage: 2 × CFast, 2 × 2.5" SATA (RAID 0/1), DDR3 (max. 16 GB) Input voltage: 9–32 V DC Protection & Operating Conditions: Fanless, -20°C to +55 / +60°C (with option) Weight: approx. 4.3 kg