Used Amplification Detector Analyzer Pcr for sale (697)

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, Five Star Refrigeration water-cooled chillers with six cooling towers Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Evaporator Stanref International shell-and-tube, model FEV3021/715, built October 2015, dry weight 2,200 kg. Hnedszz Rfqjpfx Ab Iot Shell: R134a, 570 litres, design 17.2 bar. Tubes: chilled water, 430 litres, design 10 bar. Connections labelled CHILLED WATER. Electrics SMES cabinet with controller, start/stop and emergency stop. Electronic Devices Ltd gas detector ED 811 (ATEX). Schneider Electric isolator 415 V, 250 A, type SQB7200L. Siemens motor 400/690 V, 50 Hz, IP55. Cooling towers Six towers in stock. Offered with the five chillers as a complete heat-rejection set, or as a separate lot. Used industrial plant. Sale: one chiller, all five, towers only, or 5 chillers + 6 towers. The five chillers come from one contract, so voltage, refrigerant, charge and layout match across the lot. Take a single machine for spare duty or take all five for a plant room. The six towers close the water-cooled circuit if you need heat rejection on the new site.

Condition: refurbished (used), functionality: fully functional, pump pressure: 400 bar, This excellently maintained Agilent 1100 HPLC system is ready for immediate use and provides a reliable solution for both routine and advanced chromatographic analyses. Annual preventive maintenance has been performed by certified Agilent Service Engineers. The last maintenance was performed in July 2026, during which the system successfully passed the inspection. Configuration: Agilent 1100 Solvent Tray Agilent 1100 Vacuum Degasser G1322A Agilent 1100 Quaternary Pump G1311A Agilent 1100 Standard Autosampler G1329A Agilent 1100 Thermostated Column Compartment G1316A Agilent 1100 Variable Wavelength Detector (VWD) G1314A Hodpfszzdxqox Ab Ient Agilent 1100 Controller G1323B 3-month warranty 3-month warranty

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Hnodozwgiqspfx Ab Iot

Condition: new, FANUC SERVO AMPLIFER MODULE Hsdpfx Abszk Rihe Iont Type: A06B-6079-H106 Condition: New, including packaging

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, Lamella Production Machine The automatic acoustic panel stapler is equipped with an advanced three-axis NC control system, providing exceptional precision and flexibility in the manufacturing process. Below are the detailed advantages of each axis: Hedpfx Aboy Sw I Ne Ient 1. X-Axis: Precise Stapler Positioning Along the Horizontal Axis - The X-axis ensures accurate horizontal positioning of the staplers along the panel. This guarantees that staples are precisely applied at designated points, ensuring consistent stitching quality across the entire length of the panel, regardless of its size. 2. Y-Axis: Vertical Movement - The Y-axis allows vertical movement of the stapler, enabling stapling at various locations on the panel, regardless of its dimensions or shape. This enables the stapler to work with non-standard sized panels while maintaining full accuracy. 3. Z-Axis: Depth and Stapling Force Control - The Z-axis controls the depth and force with which the staples are driven into the panel. This allows the process to be precisely adjusted according to the thickness and hardness of the acoustic panel material. As a result, staples are embedded with optimal strength, ensuring the durability and aesthetics of the finished product while minimizing the risk of material damage. ### Automatic Changeover Automatic changeover is a key feature that significantly enhances production efficiency. With this function: - Changeover of the X, Y, and Z axes is fully automatic. ### Production Process Optimization Integration with production management systems such as MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) enables: 1. Full Control Over the Manufacturing Process: - Thanks to MES and ERP integration, every stage of production can be fully monitored and managed. 2. Optimization of Media and Material Consumption: 3. Optimization of Production Plans: ### Significant Relief for Operators Automation of the acoustic panel stapling process directly reduces manual workload: - Elimination of manual control requirements - Increased work efficiency ### Capability to Develop Algorithms for Media Demand Analysis Thanks to advanced integration with manufacturing management systems, the stapler allows for the creation of sophisticated algorithms to analyze production media demand: 1. Media Demand Analysis: 2. Adapting Production to Variable Conditions: ### OEE (Overall Equipment Effectiveness) Analysis The stapler also facilitates advanced OEE analysis, a key performance indicator in production operations: 1. Comprehensive Production Monitoring: 2. Automatic OEE Calculation: - The MES system automatically calculates the OEE value based on collected data, allowing immediate assessment of the stapler’s operational efficiency. This tool enables rapid identification of areas requiring optimization, such as downtime reduction, product quality improvement, or machine performance enhancement. 3. Early Detection of Problematic Areas: 4. Optimization of Production Plans: ### TPM (Total Productive Maintenance) and Automated Condition Monitoring The stapler also supports the implementation of TPM philosophy, focusing on maximizing machine efficiency and reliability...

Condition: new, functionality: fully functional, Year of construction: 2026, Designed for high-capacity mining and quarrying operations, this stationary crushing and screening plant has a production capacity of 600–750 TPH. Equipped with a three-stage crushing system (Primary Impact Crusher + Secondary Impact Crusher + Vertical Shaft Impact Crusher) and multi-deck screening units, it delivers high efficiency while producing high-quality, cubical aggregates. According to the detailed engineering design, the plant consists of the following equipment: Main Equipment Feeding Group TB-60 Vibrating Feed Hopper 60 m³ capacity 2 × 11 kW motors 1400 × 2500 mm Wobbler Feeder 22 kW motor Automatic lubrication system 1000 × 5000 mm Wobbler Under Conveyor 5.5 kW motor Reversible operation PDK-1415 Primary Impact Crusher 355 kW main motor 3 kW auxiliary motor Designed for the primary crushing of soft and medium-hard stone TE-1848 Vibrating Screen Screen size: 1800 × 4800 mm 2-deck configuration 18.5 kW motor DMK-03 Secondary Impact Crusher Rotor size: Ø1120 × 1500 mm 315 kW main motor 3 kW auxiliary motor TE-2470 Vibrating Screen Screen size: 2400 × 7000 mm 4-deck configuration 2 × 30 kW motors VSI-1000 Vertical Shaft Impact Crusher Designed with 2 × 315 kW motors Produces high-quality cubical aggregates and premium manufactured sand TE-1650 Vibrating Screen Screen size: 1600 × 5000 mm 2-deck configuration 18.5 kW motor Conveyor Belt System Multiple belt conveyors throughout the plant with widths ranging from *650 mm to 1200 mm* and lengths from *5 m to 30 m* High-speed conveyors (126 dld) for efficient material flow Metal detectors and magnetic separators on selected conveyor lines for foreign material removal Belt-pulley drive systems with heavy-duty drum construction Control Cabin & Electrical System Central control cabin for complete plant operation Individual electrical panels with dedicated circuit breakers for each piece of equipment Total installed power: approximately 2,109.4 kW Why Choose This Plant? Hodpfx Ajzqadujb Isnt Continuous production capacity of 600–750 TPH Three-stage crushing system (PDK + DMK + VSI) for producing high-quality, cubical aggregates in the desired gradation Accurate product sizing with multi-deck vibrating screens (TE-1848, TE-2470, and TE-1650) Safe and clean production with conveyor lines equipped with metal detectors and magnetic separators Turnkey installation based on a detailed engineering design Customizable capacity and equipment configuration to meet specific customer requirements For more detailed technical information, pricing, and installation planning, please feel free to contact us.

Condition: excellent (used), 3,000 L Complete Pilot Bioreactor / Fermentation System Complete 3,000 L pilot-scale bioreactor installation, fully skid-mounted and integrated on a stainless-steel frame. The complete system is built as an integrated stainless-steel skid installation, including the process vessel, pumps, piping, valves, instrumentation, control system, and auxiliary equipment. The skid is equipped with a platform and access stairs. The installation is highly suitable for testing, developing, and optimizing fermentation processes on a pilot scale. Main components: - Stainless-steel conical process vessel - Maximum working volume: 3,000 L - Heating/cooling jacket - Sampling connection - Custom-built sparger for air/gas injection - Cambridge Sensotec Rapidox 3100 off-gas analyzer - 4 × Watson Marlow 0XZ-63L/4 dosing pumps - Mettler Toledo InPro3250i pH sensor - MT 6850i DO sensor - Endress+Hauser TMR35 temperature sensor - Aerzen blower with 7.5 kW electric motor - 2 × 0.2 μm PTFE air filters - Bran+Luebbe N-K11 plunger pump - Netzsch 4NL30A and 4NL40A progressing cavity pumps - Recirculation system - Complete CIP system - Gas control system including control valves and MFCs - PLC control system for pumps, valves, temperature, DO, and other process parameters - SCADA system for monitoring, operation, data logging, and data export - DO cascade control - Complete stainless-steel skid/frame with platform and access stairs - Sweco vibrating sieve --> three decks, not visible in the pictures. - Sieve bend - Screw press - Aseptic capability with tank modification The current installation is not designed as an aseptic system. However, the existing process vessel can be replaced with a suitable aseptic vessel, making it possible to adapt the installation for aseptic fermentation applications. Including documentation & technical knowledge from the manufacturer. Hodpfjzw Rklsx Ab Isnt In addition, all available technical knowledge regarding the installation, operation, and maintenance is available, providing an excellent basis for future commissioning, operation, and servicing. Complete Integrated Pilot System A highly versatile 3,000 L pilot fermentation system, combining process vessel, pumping, dosing, aeration, temperature control, CIP, process instrumentation, and advanced PLC/SCADA control in a complete stainless-steel skid-mounted installation. An excellent solution for pilot-scale fermentation development, process testing, and optimization.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 75 kW (101.97 HP), COMPLETE WASTE WOOD DISPOSAL LINE RUDNICK & ENNERS – Year of manufacture 2011 For sale is a complete waste wood disposal plant by Rudnick & Enners, built in 2011. The line consists of 20 components and was used for the automatic removal, sorting, and processing of edgings, wood chips, and residual wood in a sawmill. The system has a modular design, is dismantled, in very good condition, and available immediately. Technical Overview – Positions 1 to 20 01 – Crooked chain conveyor from reducer, W 600 mm 02 – Vibrating chute 1-edging line, L 13.0 m, W 650 mm 03 – Vibrating chute 2-edging line, L 15.0 m, W 650 mm 04 – Vibrating chute frame saw line, L 8.50 m, W 500 mm 05 – Vibrating chute 1-frame saw line, L 10.0 m, W 500 mm 06 – Vibrating chute 2-frame saw line, L 9.0 m, W 500 mm 07 – Vibrating chute frame saw roller conveyor, L 7.50 m, W 500 mm 08 – Vibrating chute trimming line, L 11.0 m, W 650 mm 09 – Vibrating chute trimming line, L 9.0 m, W 650 mm 10 – Screw conveyor for sawdust, L 4.0 m, Dia. 300 mm 11 – Conveyor belt to chipper, L 3.60 m, W 500 mm Hnodpfx Abozxk S Eo Ist 12 – Slab conveyor belt, L 11.0 m, W 300 mm 13 – Waste conveyor belt, L 11.60 m, W 300 mm 14 – Metal detector 15 – Chipper type RE-TH 250/700/5, Motor 75 kW 16 – Double screw under chipper, W 600 mm 17 – Crooked chain conveyor to screen, W 600 mm 18 – R&E screen, L 4.0 m, W 2.0 m 19 – Crooked chain conveyor to landfill, W 500 mm / W 300 mm 20 – Crooked chain conveyor to wood chip storage, W 600 mm Additional Information Manufacturer: Rudnick & Enners Year of manufacture: 2011 Condition: very good, used and dismantled Availability: immediately ex stock Location: A-3525 Lugendorf, Austria Application: Sawmills, biomass plants, wood processing

Condition: excellent (used), functionality: fully functional, MONDINI EVOLUZIONE SUPER E380VG PET Packaging Line for Solids and Liquids MONDINI EVOLUZIONE SUPER E380VG automatic packaging line, designed for filling and packaging solid and liquid products in PET containers, integrating different dosing and handling operations within a single industrial facility. The line combines a multi-head weighing and dosing system for solid products with stations for incorporating liquid components, enabling formulations in which the container contains a solid part and a covering liquid, sauce, brine, or other liquid component, depending on the installed configuration. Its construction, primarily in stainless steel, elevated platform, automatic transport systems, and safety enclosures, provides a complete solution for professional food packaging lines. MAIN FEATURES -Manufacturer: MONDINI -Model: EVOLUZIONE SUPER E380VG -Type: Automatic PET packaging line -Application: Solid + liquid products -Automatic container feeding system -Solid product dosing -Integrated multi-head weigher -Weight-controlled dosing -Independent system for liquid incorporation -Automatic container transport -Synchronized positioning at stations -Elevated platform for dosing equipment -Structure and processing areas mainly in stainless steel -Safety enclosures and protections -Continuous industrial operation -Integrable with inspection and end-of-line equipment PROCESS PET containers are automatically fed into the line and transported to the various processing stations. The solid product is fed to the multi-head weigher, where it is divided into different portions, and the appropriate combination is selected to achieve the target weight. Subsequently, the dose is discharged into each container. In a later stage, the liquid component can be incorporated, allowing the product to be completed before the final packaging operations. The line can be combined with: PET container feeders Multi-head weighers Liquid dispensers Product feeding systems Sealing/closing equipment Weight controllers Metal detectors Labelers Case packers and end-of-line equipment APPLICATIONS Hsdpfxewny Rxo Ab Isnt Particularly suitable for canning industries, manufacturers of ready meals, processed vegetables, pickles, and other food companies that need to package combinations of solid and liquid products. Depending on the installed configuration, it can be suitable for vegetables, legumes, olives, pickles, prepared products, and other foods with covering liquids or sauces. The combination of MONDINI EVOLUZIONE SUPER E380VG, multi-head dosing, and filling of solids and liquids provides an automated solution for PET packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2025, Horizontal packaging machine, MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder. - Specifications: stainless steel version (SS304); max. speed of the machine in neutral: 7 cycles/minute; bag width: 100-300mm; bag length: 100-350mm; compressed air: 0.2m³/min, 6.5bar; power: 220V, 1kW, 1 phase; dimensions of the machine: L1754xW510xH1617mm. Hnodpsv Nllljfx Ab Ijt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, X-ray inspection system for small single bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 250 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 80 kVp, 1.25 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; X-ray beam: horizontal scan; conveyor belt height: 850 ± 30 mm; conveyor speed (dependent on product dimensions): 10 – 100 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system: L800xW860xH1580 mm; weight: 270 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hnsdpov Nm H Rofx Ab Ijt

Year of construction: 2025, condition: new, X-ray inspection system for small single bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 270 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 80 kVp, 1.25 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; X-ray beam: horizontal scan; conveyor belt height: 850 ± 30 mm; conveyor speed (dependent on product dimensions): 10 – 100 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system: L900xW685xH1680 mm; weight: 300 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hodpfx Asv Nm Ibeb Ient

Year of construction: 2025, condition: new, X-ray inspection system especially for tin cans and plastic containers, jars. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 200 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 150 kVp, 7.5 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; X-ray beam: vertical scan; conveyor belt height: 900 ± 30 mm; conveyor speed (dependent on product dimensions): 10 –60 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system: L2000xW1300xH2060 mm; weight: 650 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hnodpfjv Nm I Uex Ab Iot

Condition: new, Year of construction: 2025, Very small and high sensitive Metal Detector, flexible setting of detector head, suitable for detecting small products and specials applications. - Specifications: stainless steel framework; weight of product: max. 1kg; detecting speed: 0.17-1m/sec; detecting accuracy: FE from Ø 0.6mm, SUS from Ø 1.8mm; tunnel size WxH: 150x100mm; max. passing size WxH: 110x60mm; power: 220V/0.15kW, 50Hz/60Hz; dimensions and weight: L940xW500xH1198mm, 100/200kg. Hnsdpfxov Nm E Ho Ab Ijt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, mileage: 46,171 km, power: 125 kW (169.95 HP), first registration: 03/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: 263217 Former non-binding recommended retail price from the car manufacturer: 85,917 ¤ 1st owner, accident-free, with complete service history, non-smoker ---- HIGHLIGHTS & PACKAGES * Winter package * Auxiliary electric heater * Charging package, dashboard * Cargo compartment package 2 * Smoker package ASSISTANCE SYSTEMS Hnsdozkqcnopfx Ab Iot * Blind spot assist * Mercedes-Benz emergency call system * Breakdown management * ECO start/stop function * Cruise control (TEMPOMAT) * Headlamp assist * Rain sensor * ATTENTION ASSIST * Hold function * Active brake assist * Traffic sign assist * Active lane keeping assist * Parking package with reversing camera * Crosswind assist ENGINE, TRANSMISSION & CHASSIS * 9G-TRONIC AUDIO & COMMUNICATION * Instrument cluster with color display * Digital radio (DAB) * Communication module (LTE) for digital services * MBUX multimedia system INTERIOR * Clothes hook in the cab * Ceiling light(s) in the cab/passenger compartment with door contact * Lashing rails on the side panel to the roof frame * Cargo area lighting via motion detector * Grab handles for driver and passenger entry * Grab handle for entry into the sliding cargo door on the partition * Semi-automatic climate control system TEMPMATIC * USB socket 5 V * Entry handle on the rear left corner pillar * Climate zone 1 (cold/comfort) * Entry handle on the rear right corner pillar * Wooden floor * Lashing rails on the side panel to the side rail * Multifunction steering wheel * Seat heating for driver * Seat heating for passenger * Load securing rail system * Storage compartment above the windshield * Pre-installation for electrical system, configurable special module * Fabric Maturin black * Cup holders in the front * LED light strip in the cargo compartment * Comfort roof control unit * Airbag driver * Airbag passenger * Comfort driver's seat * Double passenger seat * Comfort headrest driver * Partition, full-height * Speedometer km/h * Steering wheel adjustable in inclination and height * Leather steering wheel * Cable duct on the side wall * Storage compartment under the cockpit * Cable duct on the rear portal * Interior paneling of the cargo area up to the roof height (wood) LIGHT & SIGHT * 3rd brake light * Adaptive brake light TECHNOLOGY & SAFETY * Hill-start assist * Parking brake, electric * Jump start - contact * Seatbelt warning system for passenger seat * Seatbelt warning system for driver seat * Outside temperature display * Seat occupancy detection, driver's seat * Anti-theft alarm system EXTERIOR * Rear doors, double-leaf, opening to the side wall * High roof * WET WIPER SYSTEM * Step, rear door * Sliding door, right * Side marker lights * Exterior mirrors, electrically foldable * Heat-insulating glass with band filter on the windshield * Exterior mirrors, heated and electrically adjustable * Towing eye, rear * Acoustic package OTHER EQUIPMENT * Mercedes-Benz MobiloVan with roadside assistance and extended warranty * Without payload adjustment 3,500 kg * Panel van * 3.5-tonne vehicle * Wheel arches, loadable * Fleece battery 12 V 92 Ah * Step lights * Front axle with increased load capacity * Electrical system for trailer socket * Additional structural modifications * Generator 14 V / 250 A * Signage / printed matter, German * Basic * Noise reduction measures * Vibration damper * Vehicle HVO-compatible * Head unit Europe/CIS/Mongolia Further features * Wheelbase 4325 mm, short overhang * Model year G4-II * Digital extra: Hard disk na

Condition: new, SHIMADZU Moisture Analyzer MOC-120H, 120 g A high-precision instrument for determining the moisture content in plastic granules. Thanks to its user-friendly software and the ability to efficiently carry out drying processes, the MOC-120H stands out from other moisture analyzers on the market. Comparable to the KERN DBS 60-3 moisture analyzer. The MOC-120H moisture analyzer offers a variety of functions and technical specifications: • Scale type: Moisture analyzer Hnjdpfx Abozvp Aqo Iet • Weighing range: Maximum 120 g • Readability: 0.001 g • Measuring principle: Measurement of weight reduction through drying • Size of weighing pan: Ø 130 mm • Measuring range of moisture content: 0.01 % to 100.00 % • Reading accuracy of moisture content: 0.01 % • Measuring methods: Automatic or time-controlled drying period, quick, step, or soft drying mode, "prediction" mode • Heating source: Infrared quartz radiator • Temperature range: 30 - 180°C, in 1°C steps • Housing dimensions (W x D x H): 220 x 415 x 190 mm • Weight: 4.5 kg Application examples The MOC-120H is versatile and suitable for a wide range of applications: • Food industry: Determination of moisture content in foods such as cereals, flour, meat, and dairy products. • Pharmaceutical industry: Analysis of powders, tablets, and other pharmaceutical products. • Chemical industry: Examination of chemicals and raw materials. • Environmental analysis: Determination of moisture content in soil samples and other environmental samples. Conclusion The SHIMADZU Moisture Analyzer MOC-120H, 120 g, is a high-precision and versatile instrument that is ideal for determining the moisture content in a wide variety of materials. With its extensive functions, high precision, and user-friendliness, it is an excellent choice for laboratories and production facilities that rely on accurate moisture measurements.

Condition: like new (used), Like-new, compact Z-conveyor with an integrated cooling section. Hnsdpfx Ajzv D Rpeb Ijt The cooling section allows you to accelerate the production process while simultaneously controlling the cooling of the injection-molded part. This reduces stress in the component and improves process stability. The metal detector reliably prevents metallic foreign objects such as washers, ballpoint pen parts, or similar items from entering the finished goods container. This is particularly important in sensitive areas such as the food industry and medical technology, and significantly contributes to quality assurance and product safety.

Condition: new, Year of construction: 2025, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads; weighing range (single dump): 2~200g; volume per weighing head: 0.5L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 65 cycles/min; bag sizes: L(40-300)xW(60-220)mm, (double film pulling possible for longer bags); suitable film width: 140-460mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Hodpfxsv Nnbio Ab Ijnt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, mileage: 2,42,991 km, power: 335 kW (455.47 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. ). Mercedes-Benz Actros 1846 LS 4x2 semi-trailer tractor unit. Hjdpfxjzzlcds Ab Ijnt A1C Front axle 7.5 t, A2E Rear axle, ring gear 440, hypoid, 13.0 t, A3D Rear axle with active lubrication, unstepped, A5C Axle ratio i = 2.733, B1B Electronic braking system with ABS and ASR, B2A Disc brake, on front and rear axles, B2X Parking brake, electronic, C0G Frame overhang 1050 mm, C1Y Wheelbase 3850 mm, C5A Chassis design for ADR, C5B Footplate over frame, partial covering, C5D Step, behind cab, left, D0A Leather steering wheel, D0L Smoker's package, D0S Compressed air connection, in cab, D0U Smoke detector, in cab, D1C Driver's air-suspended seat, comfort, D2Y Seat belt control, D3B Comfort bed, lower, D3Q Seat cover, velour, D4S Sun visor, 1-piece, electric, windshield, D4Z Sun visor, side, driver and passenger side, D6C Electric stationary air conditioning, D6G Automatic climate control, D6I Waste heat recovery, D6M Hot water auxiliary heating, cab, D6V Noise and heat insulation cab, D7F Stowage flaps, above windshield, one lockable, D7G Stowage compartment lid, driver and passenger side, D7I Stowage trays, for stowage compartments, D7J Drawers, under bed, D7K Drawer, under instrument panel, D7V Table, on passenger side, D7Y Luggage compartment, at top of rear wall, D8N Lifting roof, electric, D8X Low seat box, lowered by 40 mm, E4B Interface, Fleet Management System FMS, E5A Switch No. 1 for external bodywork electrics, E5B Switch No. 2 for external bodywork electrics, E5H Night driving light switch, E5K MirrorCam switch, on bed, E5X ADR type class AT, E5Z ADR accessories, fire extinguisher in stowage compartment + behind cab, E6A Trailer socket 24 V, 15-pin, E6Y Reversing warning, combined with hazard warning lights, E7F Cable remote control for air suspension, E9G Preparation for electrical equipment, E9I Preparation for switch, lift axle, semi-trailer/trailer, F1I L-cab StreamSpace, 2.50 m, flat floor, F3C Cab mounting, comfort, air-suspended, F3W Cab tilting mechanism, mechanical-hydraulic, F6D Windshield tinted, with band filter, F6I Front mirror, heated, F6Q Air horn, F6T MirrorCam, F7B Bumper, corners made of steel, F7C Bumper, center part with towing eyes, F7X Cab entry left/right, fixed, F8E Locking system, with central locking, F8F Comfort locking system, F8V Light sensor, F8W Rain sensor, G0T Predictive Powertrain Control, G0U Driving program economy, G2B Gearbox G 211-12/14.93-1.0, G5A Single-plate clutch, G5G Mercedes PowerShift 3, H2C Saddle coupling distance +600 mm, I2G Tires tubeless, 315/80 R 22.5 front/front axle/steerable axle, I2H Tires tubeless, 315/80 R 22.5 rear axle, I6X Air suspension, rear axle, J1O Tachograph digital, 2nd generation, ADR, J1S Tachograph manufacturer VDO, J2J Sound system, J2M Aux-in, in side wall compartment, right, J2U Navigation system, J2Y CB radio, 24 V, J3U Preparation for Fleetboard Manager App, J3V Truck Data Center 7, J3Z Axle load measuring device, J6C Multimedia cockpit, interactive, J6Y Remote Online, J6Z Preparation for Mercedes-Benz Truck App Portal, J8Y Preparation for Truck Data Center 7, J9D Preparation for toll collection, K2P Tank 390l+130l hydraulic oil, left, 650x700x1365 mm, aluminum, K3V AdBlue tank 60 l, left, L1A Bi-xenon headlights, L1D Automatic high/low beam and cornering lights, L1I Fog lights, LED daytime running lights, L1P LED taillights, L2H Side marker lights, flashing, L3A Work lights, lower, L3C Work lights,...

Condition: used, mileage: 1,82,600 km, power: 375 kW (509.86 HP), first registration: 03/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: black, gearing type: automatic, emission class: euro6, Equipment: air conditioning, electronic stability program (ESP), navigation system, parking heater, Well-maintained according to service schedule ---- ----* 12-speed automatic transmission * Load/axle weight indicator in the display * VEB+ (Volvo Engine Brake+) * Differential lock, rear axle * Electronic Stability Program (ESP) * Disc brakes * Smoke detector in the cab * Roof window and emergency exit, electrically operated * Adaptive Cruise Control (ACC), collision warning + emergency braking function * Navigation system * Lane Keeping Assist (LSS-DW) * Side collision avoidance assist on both sides * Storage compartments above the bunk Hnodpfx Aszvilljb Iet * Exterior sun visor, transparent * Heated rearview mirror * Electrically adjustable and heated exterior mirrors * Cooler box in the cab * Rain sensor * Roof and side spoilers on the cab * Electrically operated windows for driver and passenger doors * Air-sprung cab suspension * Rearview mirror with close-range camera on the passenger side * Mirrors, electrically adjustable, driver and passenger side * Central locking with remote control * Immobilizer (transponder) * Volvo I-Shift transmission * Automatic climate control * Auxiliary warm air heater * Heated driver's seat * Volvo I-ParkCool (integrated parking air conditioning system) * Air suspension, rear axle, 4 air springs * Engine, 6-cylinder * Volvo I-See with map-based topographic information * Telematics gateway with 4G * Reversing warning * Fuel tank, 405 liters * Fuel tank, 610 liters * Headlight cleaning system * Engine version, Euro 6, E * Engine version with AdBlue * Driver's seat, air-sprung * Lower bunk * Upper bunk * Volvo I-Torque: Fuel-optimized cruise control (incl. I-Roll) * Driver comfort package * EBS * Without spare wheel ----For sale only to commercial customers! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will gladly provide you with a leasing or financing offer.

Condition: used, mileage: 37,167 km, power: 125 kW (169.95 HP), first registration: 03/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: 263271 Former non-binding recommended retail price of the automobile manufacturer: 85,917 € 1st owner, accident-free, serviced according to schedule, non-smoker ---- HIGHLIGHTS & PACKAGES * Winter package * Charging package dashboard * Load compartment package 2 * Smoker package * Auxiliary electric heater ASSISTANCE SYSTEMS * Blind Spot Assist * Mercedes-Benz emergency call system * Breakdown management * ECO Start/Stop function * Cruise control * Headlight Assist * Rain sensor * ATTENTION ASSIST * HOLD function * Active Brake Assist * Traffic Sign Assist * Active Lane Keeping Assist * Parking package with reversing camera * Crosswind Assist ENGINE, TRANSMISSION & CHASSIS * 9G-TRONIC AUDIO & COMMUNICATION * Instrument cluster with color display * Digital radio (DAB) * Communication module (LTE) for digital services * MBUX multimedia system INTERIOR * Clothes hook in the driver's cab * Interior light(s) in driver/passenger compartment with door contact * Lashing rails on side wall to roof frame * Load compartment lighting with motion detector * Grab handles for entry of driver and front passenger * Grab handle for entry of load compartment sliding door on partition * Semi-automatic climate control system TEMPMATIC * USB socket 5 V * Entry handle on rear left corner pillar * Climate zone 1 (cold/comfort) * Entry handle on rear right corner pillar * Wooden floor * Lashing rails on side wall to side panel * Multifunction steering wheel * Seat heating for driver * Seat heating for front passenger * Load securing rail system * Storage compartment above front windshield * Pre-installation electrical system, parameterizable special module * Fabric Maturin black * Cupholder in front * LED light strip in the load compartment * Comfort roof control unit * Airbag driver * Airbag front passenger Hedozr Thvjpfx Ab Iont * Comfort driver's seat * Front passenger seat, double seat * Comfort headrest for driver * Partition, full-height * Speedometer km/h * Steering wheel adjustable in inclination and height * Leather steering wheel * Cable duct on side wall * Storage compartment under cockpit * Cable duct on rear portal * Interior lining of load compartment up to roof height (wood) LIGHT & VISION * 3rd brake light * Adaptive brake light TECHNOLOGY & SAFETY * Hill-start assist * Parking brake, electric * Jump start contacts * Seatbelt warning system for front passenger seat * Seatbelt warning system for driver's seat * Outside temperature display * Seat occupancy recognition for driver's seat * Anti-theft and intrusion alarm system EXTERIOR * Rear doors, double-leaf, opening to the side * High roof * WET WIPER SYSTEM * Step at rear door * Sliding door, right * Side marker lights * Exterior mirrors, electrically foldable * Heat-insulating glass with band filter on the front windshield * Exterior mirrors, heated and electrically adjustable * Towing eye, rear * Acoustic package OTHER EQUIPMENT * Mercedes-Benz MobiloVan with roadside assistance and extended warranty * No payload adjustment, 3,500 kg * Panel van * 3.5-ton * Wheel arch loadable * Fleece battery 12 V 92 Ah * Step lights * Front axle with increased load capacity * Electrical system for trailer socket * Additional structural modifications * Generator 14 V / 250 A * Signs / printed matter German * Basic * Noise reduction measures * Vibration dampers * Vehicle capable of running on HVO fuel * Head unit Europe/CIS/Mongolia Further features * Wheelbase 4325 mm, short overhang * Model year G4-II *

Condition: used, mileage: 33,656 km, power: 125 kW (169.95 HP), first registration: 03/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: 263335 Former non-binding recommended retail price from the automobile manufacturer: 85,917 € 1st owner, accident-free, with service booklet, non-smoker ---- HIGHLIGHTS & PACKAGES * Winter package * Auxiliary electric heater * Charging package, instrument panel * Loading space package 2 * Smoker package ASSISTANCE SYSTEMS * Blind Spot Assist * Mercedes-Benz emergency call system * Breakdown management * ECO start/stop function * Cruise control * Headlamp assist * Rain sensor * ATTENTION ASSIST * HOLD function * Active Brake Assist * Traffic Sign Assist * Active Lane Keeping Assist * Parking package with reversing camera * Crosswind Assist ENGINE, TRANSMISSION & CHASSIS * 9G-TRONIC AUDIO & COMMUNICATION * Instrument cluster with color display * Digital radio (DAB) * Communication module (LTE) for digital services * MBUX multimedia system Hodszwkbkepfx Ab Ijnt INTERIOR * Clothes hook in the driver's cab * Ceiling light(s) in the driver's/passenger cabin with door contact switch * Tie-down rails on the side wall to the roof frame * Loading space lighting via motion detector * Grab handles for entry for driver and front passenger * Grab handle for entry into the sliding load compartment door on partition * Semi-automatic TEMPMATIC climate control system * USB socket 5 V * Entry handle on the rear left corner pillar * Climate zone 1 (cold/comfort) * Entry handle on the rear right corner pillar * Wooden floor * Tie-down rails on the side wall to the side rail * Multifunction steering wheel * Seat heating for driver * Seat heating for front passenger * Load securing rail system * Stowage compartment above the windshield * Electrical pre-installation, configurable special module * Fabric Maturin black * Cup holder in front * LED light strip in the loading space * Comfort roof control unit * Airbag driver * Airbag front passenger * Comfort driver's seat * Double front passenger seat * Comfort headrest for driver * Full-height partition * Speedometer km/h * Steering wheel adjustable in inclination and height * Leather steering wheel * Cable duct on the side wall * Stowage compartment under the cockpit * Cable duct on the rear portal * Interior panelling of the loading space up to roof height (wood) LIGHT & SIGHT * 3rd brake light * Adaptive brake light TECHNOLOGY & SAFETY * Hill start assist * Parking brake, electric * Jump start – contact * Seat belt warning for front passenger seat * Seat belt warning for driver's seat * Outside temperature display * Seat occupancy detection, driver's seat * Anti-theft alarm system EXTERIOR * Rear doors, double-leaf, opening up to the side wall * High roof * WET WIPER SYSTEM * Step, rear door * Sliding door, right * Side marker lights * Exterior mirrors, electrically foldable * Heated glass with band filter on the windshield * Exterior mirrors, heated and electrically adjustable * Towing eye, rear * Acoustic package OTHER EQUIPMENT * Mercedes-Benz MobiloVan with roadside assistance and extended warranty * without load capacity adjustment 3,500 kg * Box van * 3.5-tonne * Wheel arches can be loaded * Vlies battery 12 V 92 Ah * Exit lights * Front axle with increased load capacity * Electrical system for trailer socket * Additional structural modifications * Generator 14 V / 250 A * Signage / print materials in German * Basic * Noise reduction measures * Vibration dampers * Vehicle HVO capable * Head unit, Europe/CIS/Mongolia Other features * Wheelbase 4325 mm, short overhang * Revision year G4-II * Digital e

Condition: used, mileage: 46,703 km, power: 125 kW (169.95 HP), first registration: 05/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: 263336 Former non-binding recommended retail price from the car manufacturer: 85,917 € 1st owner, service booklet maintained, non-smoker ---- HIGHLIGHTS & PACKAGES * Winter package * Auxiliary electric heater * Charging package, dashboard * Loading compartment package 2 * Smoker's package ASSISTANCE SYSTEMS * Blind Spot Assist * Mercedes-Benz emergency call system * Breakdown assistance * ECO Start-Stop function * TEMPOMAT (cruise control) * Driving light assistant * Rain sensor * ATTENTION ASSIST * HOLD function * Active Brake Assist * Traffic Sign Assist * Active Lane Keeping Assist * Parking package with reversing camera * Crosswind Assist ENGINE, TRANSMISSION & CHASSIS * 9G-TRONIC AUDIO & COMMUNICATION * Instrument cluster with color display * Digital radio (DAB) * Communication module (LTE) for digital services * MBUX multimedia system INTERIOR * Clothes hook in the driver's cab * Ceiling light(s) in the driver's and passenger compartment with door contact switch * Lashing rails on the side panel at the roof frame * Loading compartment lighting via motion detector * Grab handles for entry for driver and front passenger * Grab handle for entry into the sliding door of the loading compartment on the partition * Semi-automatic TEMPMATIC climate control system * USB socket 5 V * Entry handle on the rear left corner pillar * Climate zone 1 (cold/comfort) * Entry handle on the rear right corner pillar * Wooden floor * Lashing rails on the side panel at the bulwark * Multifunction steering wheel * Seat heating for driver * Seat heating for front passenger * Load securing rail system * Storage compartment above the windshield * Electrical pre-installation, configurable special module * Fabric Maturin black * Cupholder in front * LED light strip in the loading compartment * Comfort roof control unit * Airbag, driver * Airbag, front passenger Hsdpfxozwtlfo Ab Iont * Comfort driver's seat * Front passenger seat, double seat * Comfort headrest, driver * Partition, full height * Speedometer km/h * Steering wheel adjustable in inclination and height * Leather steering wheel * Cable duct on the side panel * Storage compartment under the cockpit * Cable duct on the rear portal * Interior lining of the loading compartment up to roof height (wood) LIGHT & VISIBILITY * 3rd brake light * Adaptive brake light TECHNOLOGY & SAFETY * Hill-start assist * Parking brake, electric * Jump start contacts * Seatbelt warning for front passenger seat * Seatbelt warning for driver's seat * Outside temperature display * Seat occupancy recognition for driver's seat * Anti-theft and intrusion alarm system EXTERIOR * Rear doors, two-wing, opening to the side * High roof * WET WIPER SYSTEM * Running board, rear door * Sliding door, right * Side marker lights * Exterior mirrors, electrically foldable * Heated windshield with band filter * Exterior mirrors, heated and electrically adjustable * Towing eye, rear * Acoustic package OTHER EQUIPMENT * Mercedes-Benz MobiloVan with roadside assistance and extended warranty * Without weight increase/decrease 3,500 kg * Box van * 3.5-ton vehicle * Wheel arches can be loaded * Fleece battery 12 V 92 Ah * Exit lights * Front axle with increased load capacity * Electrical system for trailer socket * Additional construction measures * Generator 14 V / 250 A * Signs / printed matter, German * Basic * Noise reduction measures * Vibration damper * Vehicle compatible with HVO fuel * Head unit, Europe/CIS/Mongolia Further features * W

Condition: used, mileage: 1,13,900 km, power: 375 kW (509.86 HP), first registration: 11/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, electronic stability program (ESP), parking heater, Trailing axle can be lifted. * Fully maintained according to service schedule ----Palfinger roll-off tipper, type PH T20 SLD 5, lifting capacity 20,000 kg, suitable for containers up to 7,000 mm, radio remote control, hydraulic internal locking, hydraulic underrun protection. ----* Additional cab insulation * 12-speed automatic transmission * Load/axle load display in the instrument panel * VEB+ (Volvo Engine Brake+) * Differential lock, rear axle * Air-suspended rear axle * Duomatik brake connection * Electronic Stability Program (ESP) * Disc brakes * Smoke detector in the cab * Roof window and emergency exit can be opened electrically * Adaptive Cruise Control (ACC), collision warning + emergency braking function * Lane Keeping Assist (LSS-DW) * Globetrotter cab * Storage compartments above the bunk * Exterior sun visor, transparent * Electrically adjustable and heated exterior mirrors * Cool box in the cab * Rain sensor * Electric window lifts for driver and passenger doors Hodpfx Ajzztawob Iont * Air-suspended cab mounting * Leather steering wheel * Rearview mirror with close-range camera on the passenger side * Central locking with remote control * Immobilizer (transponder) * Volvo I-Shift transmission * Automatic climate control * Auxiliary heater * Heated driver's seat * Volvo I-ParkCool (integrated auxiliary air conditioning) * Engine: 6-cylinder * Volvo I-See with map-based topographical information * Telematics gateway with 4G * Reversing camera * Fuel tank: 550 liters * LED headlights * Headlight cleaning system * Engine design: Euro 6 * Engine design with AdBlue * Auxiliary drive * Fifth wheel coupling * Air-suspended driver's seat * Lower bunk * Volvo I-Torque: fuel-optimized cruise control (incl. I-Roll) * Driver comfort package * Steerable and liftable trailing axle * EBS * Without spare wheel ----For sale to businesses only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will be happy to provide you with a leasing or financing offer.

Condition: like new (used), overall weight: 1,320 kg, maximum load weight: 21 kg, load capacity: 17 kg, Refurbished vertical shaft basket centrifuge on inertia plate mounted top discharge with bag. Model 100F-500 manufactured by RIERA NADEU Hsdpfxjrrwdmo Ab Ijnt All parts in contact with the product are made of AISI 316L stainless steel. Suspension: Rigid type centrifuge on inertia plate with four anti-vibration mounts. Lid: with 5 manual opening locks, lid opening by means of a hydraulic piston (includes hydraulic power unit), two flat peepholes, N2 inlet fittings and with washing tube and loading tube connections. Transmission: 4 kW ATEX electric motor Securities: pneumatic lid opening safety piston, lid safety piston detector. lid open detector. detector for tachometer on machine and motor (includes connection box) temperature probes on bearing column and DCM mass continuity system