Used Automatic Angle Cut Off Saw for sale (38,801)

Condition: good (used), Year of construction: 1979, machine/vehicle number: 3297, functionality: fully functional, CIRCULAR SAWING MACHINE WITH MULTI-STAGE GEARBOX TYPE: 1631 MACHINE NO.: 3297 YEAR OF MANUFACTURE: 1979 Technical Data: Table size: 675 x 500 mm Nsdpjy S Sxcsfx Aqvjct Minimum distance from saw mandrel to top edge of table: 60 mm Height adjustment: 50 mm Maximum saw blade diameter: 300 mm Minimum saw blade diameter: 160 mm Saw blade arbor holes: 32 mm and 40 mm Maximum table travel: 200 mm Maximum cutting height: 87 mm Maximum cutting width to the side of the saw blade: 300 mm Standard motor power: 1.5 hp Height from top edge to table: 885 mm Space requirement: 700 x 900 mm Weight: approx. 197 kg Condition: good, functional

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels Ncjdeupbf Depfx Aqvst - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: used, Column-guided bandsaw semi-automatic METORA - KALTENBACH Type HMB 380 DS Only for 90° cuts (Made in Austria) Ncodpfsdzqtgex Aqvet Machine No. 4580028 Year of manufacture: approx. 1993 Cutting capacity round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw band speed: 25–108 m/min, continuously variable Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw in double-column design - Hydraulic saw bow descent with stepless adjustable cutting pressure - Stepless adjustable descent speed - Hydraulic vice clamping with hydraulic bundle clamping from above - Hydraulic unit integrated in machine base - Material feed roller on infeed side with geared motor (not mounted on machine frame) - Coolant system with coolant pump for water emulsion - Minimum-quantity lubrication system for the saw blade - Electric heating cartridge for cooling water and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display, and hydraulic stop carriage clamping Stop length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable without roller conveyor Machine footprint (L x W x H): 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of stop system: approx. 800 kg In good condition

Condition: used, machine/vehicle number: 008582, Max. panel width: 4300 mm Max. panel length: 5600 mm Ncodpfx Aoy Stvioqvot Main saw blade projection: 105 mm No of Grippers: 9 Panel Rotation Station: yes

Condition: new, Year of construction: 2026, functionality: fully functional, ATTENTION!!! SPECIAL OFFER!!! LAST ONE LEFT!! Features: Semi-automatic operation Hydraulic control of arm movement (up – down), with smooth adjustment of descent speed Arm position memory function Hydraulically controlled vice jaws Hydraulic cutting clamp included Hydraulic band tensioning Band cleaning brush Cooling system Bimetal band saw CE Declaration of Conformity Ncjdpfxoy Tipns Aqvjt Technical data: Type: Semi-automatic column type Control: control panel at the front of the machine Maximum cutting diameter: 350 mm, 400 x 350 mm Arm lifting: Hydraulic Arm lowering: Hydraulic Bandsaw speed: 25/60/75 m/min Vise: Hydraulic Min. cutting diameter 5 mm Min. material length in the vise 30 mm Distance from the base of the vise to the floor 780 mm Cutting band dimensions 4515 × 34 × 1.1 mm Total power 5.2 kW Belt speed 25/60/75 m/min Dimensions (L×W×H) 2400 × 1250 × 1550 mm Weight 1200 kg Manufacturer: Cormak

Condition: excellent (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, We offer for sale a fully automatic BLM Group ADIGE EM80 band saw, suitable for precise cutting of tubes and profiles in serial production. The machine is equipped with Siemens Sinumerik CNC control and an automatic material feeder, enabling efficient and repeatable production. Technical specifications: Year of manufacture: 2015 Control: Siemens Sinumerik Power consumption: 38 kW Voltage: 380 V / 50 Hz Njdpfx Aqsy Uduzjvoct Weight: approx. 8,500 kg Operating hours: approx. 26,400 h Cutting range: tubes Ø 10–80 mm Max. part length: 600 mm Ideal for serial production of short parts. Equipment: Automatic feeding system Complete machine guarding Multiple tool positions Set of clamping jaws (see photo) High-speed, high-performance saw suitable for serial production, offering high productivity and cutting accuracy. Testing possible by arrangement. More photos can be sent upon request.

Condition: like new (used), Year of construction: 2019, operating hours: 1,750 h, functionality: fully functional, MEP Tiger 372 CNC LR 4.0 automatic metal circular saw (2019) Manufacturer: Mep Model: Tiger 372 CNC LR 4.0 automatic metal circular saw Year of manufacture: 2019 Condition: used, very good, inspected and cleaned Operating hours: 1750h Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range SQUARE 45° left 100 mm Cutting range SQUARE 60° left 90 mm Cutting range SQUARE 45° right 100 mm Cutting range FLAT 0° 180 x 100 mm Cutting range FLAT 45° left 120 x 100 mm Cutting range FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Continuously variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm Width 1840 mm Height 1890 mm Weight 1060 kg Scope of delivery: – Documentation – 2 m feed roller conveyor Nedsy S Ezwepfx Aqvect – Machine lighting – Chip conveyor – Coolant system

Condition: like new (used), Year of construction: 2018, operating hours: 2,150 h, functionality: fully functional, MEP TIGER 372 CNC LR 4.0 metal circular saw + CB4001 magazine High-performance automatic CNC metal circular saw with microprocessor control for cuts from 45°right to 60°left. Manufacturer: MEP Type: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, little used Switch-on hours: 2128h Cutting time: 1738h Machine with microprocessor control and two CNC-controlled axes, which allow up to 300 cutting programs, each with its own number of pieces and length, with the same material or material on the CB4001 loading magazine. Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range FOUR-EDGE 45° left 100 mm Cutting range FOUR-EDGE 60° left 90 mm Cutting area FOUR-SQUARE 45° right 100 mm Cutting area FLAT 0° 180 x 100 mm Cutting area FLAT 45° left 120 x 100 mm Cutting area FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Infinitely variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm width 1840 mm height 1890 mm Weight:1060 kg Scope of delivery: - Original documentation - 4x saw blades Nodpfx Ajy S Ezqeqvsct

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Behringer Eisele VMS 400 A metal circular saw for processing almost all steel qualities. Integrated coolant unit and micro-spraying system, selectable in the control system as required Hydraulic saw feed and quick clamping vice with clamping pressure reduction NC control with graphic display and keypad 3 selectable operating modes (manual mode, series and single cuts) Convenient stroke adjustment of the saw unit via clamping lever Can be combined with infeed and outfeed roller conveyors Manufacturer: Behringer Eisele Type: VMS 400 A metal circular saw Year: 2013 Condition: used, very good Flat 90 ° [mm] 200 x 120 Flat 45 ° [mm] 140 x 120 Ncedpfx Aey S Eygoqvot Flat 30 ° [mm] 100 x 100 Square 90 ° [mm] 120 Square 45 ° [mm] 120 Square 30 ° [mm] 100 Round 90 ° [mm] 140 Round 45 ° [mm] 140 Round 30 ° [mm] 110 Feed length 800 mm Drive power 2.0 / 2.6 kW Speeds 8 / 16 / 32 / 64 min-1 Saw blade diameter 400 mm Saw blade feed hydraulic Material feed ball screw Hydraulic clamping device Minimum quantity lubrication Chip clearing brush Length 3,100 mm Width 1,500 mm Height 2,000 mm Weight 1,350 kg Material support height 920 mm Scope of delivery: Documentation 4x saw blades 1x feed roller conveyor 2m

Condition: new, saw blade diameter 400 mm Number of revolutions 3000 r.p.m hole of sawblade 32 mm sawblade width 4 mm Control NC total power requirement 1,5-2 kW weight of the machine ca. 162 kg required space 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Ncjdpfx Aqjy S Dwwovot Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: used, Year of construction: 1997, cutting diameter / mm saw band length 8800 mm cutting width / mm total power requirement / kW weight of the machine ca. / t Ncodpjy S D Rqofx Aqvjt required space / m

Condition: used, Year of construction: 1978, cutting diameter / mm saw band length 8800 mm cutting width / mm Nsdpfx Aoy S Drbsqvjct total power requirement / kW weight of the machine ca. / t required space / m

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 600 mm, Defect cutting function Power supply: 400 V Saw blade diameter: Ø 600 mm Machine weight: 1,820 kg Year of manufacture: 2006 Model: CT 600 Motor power: 7.5 kW Serial number: 260856 Infeed pusher dimensions: 10,300 × 2,000 × 1,250 mm Outfeed conveyor dimensions: 6,300 × 800 × 1,120 mm Outfeed table dimensions: 5,000 × 1,250 × 910 mm Rotational speed: approx. 2,600 rpm Table rotation range: max. ±70° Cutting height: approx. 200 mm (at 0°) Ncedpfxsy Tt Rvj Aqvjt Maximum cutting width: approx. 410 mm Minimum workpiece dimension: 20 × 10 mm Positioning accuracy: ±0.4 mm Cycle time: approx. 4 seconds per cut Working height: 1,000 mm Dust extraction port: Ø 100 mm Beckhoff control with 12” touchscreen (Windows interface), 3D workpiece visualization, cutting list import via USB / Ethernet.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, control type: manual, total height: 1,900 mm, total length: 1,950 mm, total width: 750 mm, overall weight: 230 kg, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Metal Band Saw BS 260G Technical Data Built-in coolant system: Yes Blade size [mm]: 2455 × 27 × 0.9 Blade tension: Mechanical (manual) Blade speeds [m/min]: 36, 72 Feed speed [m/min]: 0–50 (stepless feed) Arm descent adjustment: Stepless – hydraulic cylinder Vice base height [mm]: 1010 Power supply: 3-phase 400 V Motor power [kW]: 1.1 Dimensions [mm]: 1950 × 750 × 1900 Weight [kg]: 230 Warranty: 24 months Manual (DTR): Polish language CE declaration: Yes Product Description The horizontal metal band saw with a swivel arm allows cutting perpendicular to the axis of the workpiece as well as at any angle in the range 0°–60°. The material can be fed manually or using any mechanical feeding device, while the cutting feed of the blade is fully automatic. The blade guides are equipped with special carbide plates and bearings, which significantly improve blade guidance, durability, straightness, cutting accuracy, and overall cutting quality. The rigid saw arm is made of profiled cast iron, ensuring high stability and vibration reduction during cutting. A control panel is mounted on the machine frame for easy operation. The drive from the electric motor to the blade drive wheel is transmitted through a worm gear transmission. The cutting blade is tensioned on two cast-iron wheels using a manual tensioning system and guided in adjustable rolling and sliding carbide guides. Inside the machine there is a separate coolant tank with an electric pump, which improves blade life and cutting performance. The cutting speed (arm descent speed) is controlled by a hydraulic cylinder, while the feed rate is adjusted directly from the control panel. The machine offers two blade speeds: 36 and 72 m/min. When the arm reaches its lowest position after cutting, the blade drive automatically stops. Safety is ensured by: protective blade covers micro-switches stopping the motor when the cutting cycle is completed or a guard is opened an automatic shutdown system in case of blade breakage Applications MTP BS260G band saws are professional machines designed for cutting: steel profiles solid bars and shafts They are equipped with a hydraulic cylinder, coolant system, and swivel arm up to 60°. When combined with high-quality blades from the German manufacturer Roentgen, the machine ensures high cutting precision, quality, and efficiency. The band saw is suitable for cutting: Ncsdpfxjyr Ndhs Aqvot carbon steel alloy steel structural steel stainless steel acid-resistant steel Delivery to the customer is possible. Shipping costs are calculated individually by the transport company.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 600 mm, Defect cutting function Power supply: 400 V Saw blade diameter: Ø 600 mm Machine weight: 1,820 kg Year of manufacture: 2006 Model: CT 600 Motor power: 7.5 kW Serial number: 260856 Ncjdpfxox Nnd Ae Aqvot Infeed pusher dimensions: 10,300 × 2,000 × 1,250 mm Outfeed conveyor dimensions: 6,300 × 800 × 1,120 mm Outfeed table dimensions: 5,000 × 1,250 × 910 mm Rotational speed: approx. 2,600 rpm Table rotation range: max. ±70° Cutting height: approx. 200 mm (at 0°) Maximum cutting width: approx. 410 mm Minimum workpiece dimension: 20 × 10 mm Positioning accuracy: ±0.4 mm Cycle time: approx. 4 seconds per cut Working height: 1,000 mm Dust extraction port: Ø 100 mm Beckhoff control with 12” touchscreen (Windows interface), 3D workpiece visualization, cutting list import via USB / Ethernet.

Year of construction: 1999, condition: excellent (used), Max. Saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Pneumatic material clamps Minimum quantity spraying device Njdpsucpqtefx Aqvjct Table can be rotated on both sides with locking points at 45° Roller conveyor 4000 mm and stops 4400 mm

Condition: used, number of aggregates 6 St. cutting width ~ 5.000 mm Cutting height ~ 100 mm Ncjdeyztz Ropfx Aqvjt Daveba multiple cross-cut saw for simultaneously cutting long boards to several shorter ones (with variable length) without mechanization. The system is dismantled and ready for loading.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Bobst SPO 160 Vision, ref. 3002 Year 2004 Maximum sheet size: 1600x1100mm Maximum speed: 4500 sheets per hour QUBE system Stripping unit Njdjy Tpfvepfx Aqvoct Batch delivery In good working order.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, input frequency: 5,060 Hz, type of input current: DC, cutting height (max.): 4,115 mm, cutting width (max.): 41 mm, control type: CNC control, overall weight: 1,800 kg, year of last overhaul: 2026, Equipment: documentation/manual, AMADA PCSAW 330 – Automatic CNC Band Saw for Metal Cutting Industrial Automatic Band Saw | CNC Metal Cutting Machine | AMADA Japan For sale: AMADA PCSAW 330 automatic CNC band saw for metal cutting, designed for high-precision and high-volume industrial production. The AMADA PCSAW 330 is a reliable fully automatic horizontal band saw ideal for cutting steel bars, tubes, profiles, and solid materials. Equipped with CNC control, automatic material feeding, Pulse Cut technology, and variable blade speed control, the machine delivers accurate, repeatable cuts with excellent productivity. Ncodpfx Aoy T Ifueqvjt Manufactured in Japan by AMADA Cutting Co., Ltd., this model is widely used in metal fabrication shops, steel service centers, engineering companies, and industrial production facilities. Key Features & Benefits: ✔ fully automatic CNC band saw for metal ✔ ideal for steel, tubes, profiles, and solid materials ✔ AMADA industrial quality and reliability ✔ CNC touchscreen control system ✔ Pulse Cut technology reducing blade vibration ✔ variable blade speed control (15–120 m/min) ✔ hydraulic operation and automatic feeding system ✔ high cutting accuracy and repeatability ✔ chip conveyor and coolant system ✔ suitable for continuous and serial production Technical Specifications: Manufacturer: AMADA Model: PCSAW 330 Year: 2007 Type: automatic CNC band saw Power supply: 400 V / 3 phase / 50–60 Hz Blade motor: 3.7 kW Hydraulic motor: 1.5 kW Coolant pump: 0.18 kW Pulse Cut motor: 0.2 kW Blade dimensions: 4115 × 41 × 0.9 mm Blade speed: 15–120 m/min Power requirement: 13 kVA Machine weight: approx. 1800 kg Equipment: automatic material feed system hydraulic front and rear vises touchscreen CNC control automatic cutting cycles chip conveyor coolant and lubrication system rapid approach system manual and automatic operating modes Condition: Used machine in very good working condition, fully operational and ready for production. 📩 Contact us for price, additional photos, technical details, or machine inspection.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: three-phase, overall weight: 2,200 kg, coolant pump power: 180 W, saw band length: 4,570 mm, saw band width: 41 mm, AMADA HFA 400 – Automatic Band Saw for Metal Cutting Serial production | AMADA reliability | Industrial use The AMADA HFA 400 is an automatic horizontal band saw for metal, designed for accurate, repeatable cutting in serial production environments. This model combines a compact footprint with a rigid structure and proven AMADA Machine Tools technology. With a solid machine weight of 2200 kg and fully automatic cutting cycles, the HFA 400 is ideal for manufacturing plants, service centers, and tool rooms. ● automatic band saw for metal ● trusted brand AMADA ● rigid construction – 2200 kg ● 5.5 kW saw motor Ncedpfx Aqjyc H Ewovst ● industrial hydraulic system ● automatic cutting cycles ● high precision and repeatability ● suitable for solid materials and profiles Technical specifications ● Model: AMADA HFA 400 ● Type: automatic band saw ● Saw motor power: 5.5 kW ● Hydraulic motor: 1.5 kW ● Coolant pump: 0.18 kW ● Blade dimensions: -length: 4570 mm - width: 41 mm - thickness: 1.3 mm ● Power supply: 3-phase ● Connected load: 11 kVA ● Machine weight: approx. 2200 kg ● Year of manufacture: 2012 Condition: used, fully functional, ready for operation 📩 Contact us for price and further details.

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Nedpfoyuld Asx Aqvoct Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: reconditioned (used), Year of construction: 1992, Precision cutting machine Make: DEGEN Model: TAM 25/600 Year of manufacture: 1992 - partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / Mach. No.: 1017 Nsdpfx Aqohfwfasvjct with guarantee geometric acceptance with test report Accessories: - coolant system - operating instructions - used, as seen -

Condition: new, Short and length grinding machine Ncjdpfx Aed Idb Isqvst Brand HERZOG Model LY 600 400V version Length tolerance: ± 0.01 mm Angularity: ± 0.01 mm Diameter range: 1 – 25 mm Dimensions: 430 x 360 x 500 mm Weight: 87 kg Accessories: - Measuring stop with micrometer screw - Cup wheel and cutting wheel - Operating instructions

Condition: used, Year of construction: 2017, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm 110 mm 95 mm Ncodpfx Aqsy Ruvbevot 135x60 mm 120 mm 100 mm 135x60 mm 180 mm dimensions of saw-blade 350x32x3,4 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg

Condition: used, machine/vehicle number: 008021, Max. panel width: 4300 mm Max. panel length: 2200 mm Ncodpfx Aoy Nkygoqvst Main saw blade projection: 125 mm No of Grippers: 11 Panel Rotation Station: yes Thin sheet loading: yes Vacuum sheet loading: yes