Used Bigneat Ltd Bc1506 for sale (3,769)

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Nedjwhvq Iopfx Alhowh Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,300 mm, total width: 1,830 mm, total height: 2,735 mm, warranty duration: 12 months, overall weight: 950 kg, input voltage: 380 V, power: 35.5 kW (48.27 HP), pressure: 4 bar, temperature: 110 °C, Universal machine for heat treatment of all kind of meat products and fish. Heating can be realized by electricity, vapor or gas. Air circulation system provides processes steadiness and operates with two speeds 1450/2850 min-. Smoking generator can be installed to the left or to the right. Valve pneumatic control. Chamber is controlled by ADITEC. Nodpfx Aljwp I Axshjwh Control unit measures and control chamber and sausage temperature, humidity, delta t, processing time. 100 programs can be saved by 10 steps. Following sensors are used: Pt 100. Software for visual control is offered as an option. Chamber is equipped with a system for automatic washing. Each module is equipped with its own heating and circulation which ensure processes steadiness and processing time reduction.

Condition: used, This listing is for the Bigneat Chemcap Ductless Fume Cabinet The unit is in full working condition and is ready for immediate use The Bigneat Chemcap Ductless Fume Cabinet is a recirculating fume hood designed to protect laboratory users from hazardous fumes, vapours, gases and particulates without the need for external ductwork. Instead of venting contaminated air outside a building, it draws air into the cabinet, filters it, and then returns clean air back into the room. This makes it ideal where installing conventional ducted extraction would be difficult, costly or disruptive. Filtration & Safety Chemcap™ carbon filtration: specialised carbon media to capture a wide range of chemical vapours. Optional HEPA filtration: for removing particulates as well as gases (available on some models). Recirculatory operation: cleans and returns air to the room, eliminating hazardous external emissions and reducing energy loss Usability & Convenience Benchtop or stand-mounted: sits on a lab bench or on dedicated support furniture. Portable and easy to install: no need for building ductwork. Clear acrylic panels: offer all-round visibility of the workspace. Touch-button controls with a service-due indicator. Nwsdpjyliq Ijfx Alheh Quiet operation (~

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Model of VFFS bagger – GV2K1. Serial number - GV021201. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Njdpoy Hlvwofx Alhjwh Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Model of VFFS bagger – GV2K1. Serial number - GV021202. Nwedpey Hlkbofx Alhsh Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: FP-201610-09, working width: 960 mm, roll width: 1,000 mm, roll diameter: 1,500 mm, 4 color flexo print machine made in Korea, used for paper cup printing; Max speed 100m/min Max cardboard width - 1000mm Including: 1) 7 sets of print cylinders, total 28 cylinders 2) 8 aniloxes 3) Printing plate mount table with two cameras Nwjdpsvkp Dnjfx Alheh 4) Printing plate storage table

Condition: like new (used), Year of construction: 1989, functionality: fully functional, T. Giusti & Son Ltd s/s double jacketed mixing tank with steam boiler, serial number: J10717, capacity: 500 liter, dimensions tank: Ø 1100 mm x 2600 mm, dimensions steam boiler: 800 mm x 620 mm x 1800 mm, with switch cabinet, Nsdpexrnuwjfx Alhowh

Condition: new, Year of construction: 2026, functionality: fully functional, HM-60 HORIZONTAL MIXING MACHINE This highly versatile machine is designed to excel in a wide range of applications, making it perfect for mixing various products such as salads, meat products, and even powders. With its robust and durable paddles, you can rely on this equipment to consistently deliver uniformly mixed ingredients, guaranteeing high-quality outcomes. Nodpfjx Sxf Njx Alhewh

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: CD1500, CD-1500 VEGETABLE FRUIT DICING MACHINE This cutter is designed for slicing, dicing, and cutting fruits and vegetables like potatoes, carrots, and beets into strips, slices, or cubes. Nwedsvlwlcepfx Alhoh Interchangeable cutting tools allow you to select the shape and size of the cut pieces, ensuring uniform results. Additional tool sets are available for smaller or larger cuts if needed. Vegetables and fruits are fed manually into the hopper, and the cut pieces are discharged into a receiving bin.

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Nwsdpfeynrzbsx Alhjh Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Condition: Good Available: Immediately

Condition: new, functionality: fully functional, overall weight: 2,800 kg, Year of construction: 2025, Double deck screener on its own O2 category chassis for easy transport. Change from transport to work position within minutes. Diesel aggregate. Njdpfx Aljxpgytshewh

Condition: new, functionality: fully functional, power: 5.5 kW (7.48 HP), operation weight: 4,800 kg, Year of construction: 2025, Double deck screener on a skid frame for easy transport. Possibility of adding petrol generator, hopper extension, Feeder plate with stop rubber, Extended hinged wing-plates, Extended screenbox chute, Rear cover for screenbox and removable skid frame hook. Low operating costs, simple change of meshes, robust dimensions, 2 conveyors for medium and fine fractions. Nsdjxpgliepfx Alhewh

Condition: used, DAF Plant Comprising of: - DAF plant white water system Chemical dosing Polymer mixing Air compressors and control system. Feed pumps and blower available if required. *Drawings available* Nwjdey Au Arspfx Alhjh Located in Bristol, UK (Buyer to remove)

Condition: used, Year of construction: 2008, Technical details: length: 12192 mm width: 2438 mm height: 2896 mm weight: 4580 kg Nedpfx Aot Hzhajlhewh Total weight: 34000 kg charge: 29420 kg Cooling Container Internal dimensions: Length 11585mm Width 2290mm Height 2545mm Pallet spaces 23 *

Condition: like new (used), Chemineer Ltd PD5M mixing tanks Nwedpfx Alekl Hq Noheh Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Nwsdpfjvy Aipox Alheh Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Year of construction: 2006, condition: good (used), Cross belt grinding machine Ashton AIS / XDIA Model AIS/3350 / XDIA S/N XP 20100082 (from Glasmek AB Sweden renovated in 2010) Manufacture: Ashton Industrial Sales LTD / UK year of manufacture approx. 2000 Professional Heavy Duty Seaming /Arrissing Machine 2x Diamond belt cross belts High speed abrasive and diamond grinding belts 400 V , 50 Hz castor ball tables for easy movement of the glass sheets. Table dimensions: L x W X H = 3,85m x 1,20m x 0,9m Weight 600 Kg Nsdpfoh E T N Eox Alhswh CE marked

Year of construction: 2019, condition: used, functionality: unexamined, Complete Avalon Sciences Geochain seismic acquisition set, including approx. 30 GSR-1 MKII Slim Seismic Receiver Tools with digital modules, recorders, power panels and surface support hardware. Only used a few times, in very good condition. Technical specifications: Approx. 30 × GSR-1 MKII Slim Seismic Receiver Tools with AS251 digital modules Multiple Inter-tool cables (ITC-4-40M) Telemetry adapter, formatter units, gamma-ray tool and crossover/adaptors GSP digital recorders (8 analogue channels) GPP Geochain Power Panels GPS timestamp kits Nwjdpfx Asw R Tq Aslhjh Rack-mounted PCs with hot-swap drives and NAS storage Network and power infrastructure (switches, monitors, cabling) Packed in plastic and alloy cases Total weight approx. 1,450 kg Details: Used only a few times Complete and operational system Location: Warehouse Haaksbergen Condition: Used Documentation and packing lists available on request All information has been compiled with the utmost care, but no liability is accepted for possible errors or omissions.

Condition: ready for operation (used), Year of construction: 2005, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Njdpfjxk U R Nox Alhowh Year of manufacture: 2005 Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Year of construction: 2012, condition: used, Multihead Weigher – Ishida Co., Ltd. DACS 030-SB/WP-I-N Manufacturer: Ishida Co., Ltd. Model: DACS 030-SB/WP-I-N Year of manufacture: 2012 Machine type: Multihead checkweigher / weighing system Description The Ishida DACS 030-SB/WP-I-N is a high-precision automatic checkweigher designed for dynamic inline weighing in food production and packaging lines. The machine ensures that products meet preset weight specifications while maintaining high throughput and accuracy. Ishida weighing systems are widely used in the food industry due to their reliability, hygienic design, and precise weighing technology. Technical Specifications Nwodpsyt Rbqefx Alheh - Manufacturer: Ishida Co., Ltd. - Model: DACS 030-SB/WP-I-N - Year: 2012 - Machine type: Automatic checkweigher - Application: Inline weight control - Operation: Fully automatic - Construction: Stainless steel hygienic design - Control: Digital / touchscreen interface Key Features - High-precision dynamic weighing system - Reliable operation for continuous production lines - Hygienic stainless steel design suitable for food processing - Easy integration into packaging lines - Automatic rejection of products outside tolerance (depending on configuration) Applications - Food packaging lines - Meat, poultry, and fish processing - Snack and convenience food packaging - Quality control in automated production lines Condition Used

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Condition: Nedpfx Asxm Uf Selhewh • NEW, unused • Only storage marks present (see pictures) • No operating hours

Condition: excellent (used), Year of construction: 2023, operating hours: 421 h, functionality: fully functional, Equipment: CE marking, Multiplas V4 Injection molding Machine (new 2024) We are offering for sale a well-maintained vertical injection molding machine from 2024 which is currently being used in a clean and well maintained production facility outside of Oslo, Norway. Price: 25.000 EUR This Multiplas vertical injection molding machine ensures precise positioning, enhancing the overall quality of your products. With precise control over injection speed, pressure, and temperature, you can produce high-quality parts with tight tolerances, minimizing waste and maximizing yield. Traditional horizontal injection molding machines require significant floor space, limiting your production capacity. In contrast, vertical injection molding machines utilize vertical space efficiently, allowing you to maximize your factory's footprint. With a smaller footprint, you can optimize your layout and increase machine density. Vertical injection molding machines excel in molding complex, intricate parts with precision. Their vertical clamping and injection units facilitate seamless integration into multi-component molding processes, enabling you to manufacture diverse products with varying material properties. General information: • Manufacturer: Multiplas Enginery Co. LTD • Model: Multiplas V4, V2C-50T • Serial number: on request • Year of manufacturing: 2023, delivered 2024 • Operating hours: 421 • Dimensions (L/W/H): 2,3 x 1,5 x 3.7 m • Weight: 3,4 ton • Functionality: fully operational • Condition: very well maintained Extras: • TPU Screw and barrel • CE Certificate • Color RAL 9002 • 400V Transformer • Installation guide • Machine Manual Machine Specifications: • Screw diameter: 35 mm • Theoretical Injection Volume: 154 cm3 • Injection Capacity (PVC): 145 gm • Injection Pressure: 1383 kg/cm2 Nodow S Ewqjpfx Alhjwh • Injection Rate: 69cm3/sec • Plasticizing Capacity (PVC): 53 kg/hr • Screw Rotation speed: 186 r.p.m. • Heater Capacity: 3,9 kw • Clamping Force: 55 ton • Min. mold Thickness: 350 mm • Opening Stroke: 300 mm • Max. opening Thickness: 650 mm • Ejector power: 1,8 ton • Electrical Power: 10/7,5 hp/kw • Oil tank Capacity: 160 L • Cooling water Capacity: 230 l/hr • Machine size: 2,3 x 1,5 x 3,7 m • Machine weight: 3,4 ton Can be viewed on site. More pictures and videos can be sent to interested buyers. The machine is ready to be sold immediately.

Condition: used, Year of construction: 1986, machine/vehicle number: HM32, functionality: unexamined, stroke length: 10,000 mm, coil weight: 2,000 kg, Complete used line for continuous extrusion of aluminum, conform process, Holthon Machinery brand, model C300H. Nwedpfsyic Rtsx Alhjh

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 345117, Magic-Skin 5035EV semi-automatic skin packaging machine. Board size 495mm x 345mm. Maximum product height 100mm. Timers control dwell time, heating time and vacuum time, incorporates self contained vacuum pump. Fitted with infeed/discharge tables and supplied free-standing with 4 castors 2 locking castors. (Paint colour blue) Power requirement: 230V, single phase 3 pin blue 16 amp Overall dimensions (lxwxh) 1810x965x1450mm Nwsdoywu Hgepfx Alhsh

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Serial numbers – Bulk Hopper: 706-E15 & Bucket Elevator: 706-E11. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high. Nsdpoynnliofx Alhewh