Used Cabbage Processing Line. 10 000Kg/H for sale (85,887)

Condition: new, operating pressure: 210 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, overall weight: 160 kg, warranty duration: 24 months, temperature: 155 °C, TECHNICAL DATA OF THE KARCHER HDS 10/21-4MXA WASHER: Model: HDS 10/21-4MXA Manufacturer: KARCHER Country of production: Germany Series: Professional Gjdpfxov Tbbdj Albeuc Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 7.8 Power cable (m): 5 Weight (kg): 173 Dimensions (L x W x H) (mm): 1330 x 750 x 1210 EQUIPMENT OF THE KARCHER HDS 10/21-4 MXA WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional - Longlife series 20M, DN8, 315BAR - !EasyLock Automatic high-pressure hose reel: Professional, originally integrated reel with a capacity of 20m - automatic winding. Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock Pressure regulator: Servopress KARCHER !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort 4-pole, water-cooled engine Two detergent tanks separated from each other ECO mode allows you to optimize fuel consumption (up to 20%) The set is equipped with an integrated, automatic pressure hose reel that significantly improves work comfort Additional handles allow you to transport the device with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. A standard EASY!Force Advance high-pressure gun with a rotating lance, a 20m high-pressure hose on the reel, a Servopress pressure regulator and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Year of construction: 2007, condition: new, functionality: fully functional, UNUSED Complete Potato Processing and Frying Line (2007), Installed But Never Commissioned Capacity: approx. 1,000 kg/hour This is a rare opportunity to purchase a complete European industrial line in near-new condition at a fraction of the replacement cost (>€1.5M). Key Features: - UNUSED – 0 operating hours - Installed but never put into production - Complete line: input → frying → cooling → packaging - High-quality European manufacturers - Immediate availability Main Equipment: - Blancher – Komen-Kuin (UNUSED) - Vibrators – Kiremko / Atraco (UNUSED) - Frying Line – Florigo (UNUSED) - Conveyor Belt – Florigo (UNUSED) - Pre-Refrigeration – Ferguson (UNUSED) - Refrigerator & Control Panel – Ferguson (USED, included) - Packaging Machine – Campagnolo (UNUSED) - Boiler Station – Maxxtec (UNUSED) - Oil Tank – Florigo (UNUSED) - General Control Panel (UNUSED) Condition: The majority of equipment is UNUSED (0 hours). Installed but never commissioned. Location: Greece Availability: Immediate Inspection: Available Godpfjy Axfkox Albjuc Dismantling & loading support: Provided Note: Priority will be given to buyers interested in the full line. Serious inquiries only.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. Gusdpfexf Hm Sex Albjc In good working condition. Inspection is possible by appointment. Available: NOW

Condition: used, Year of construction: 2006, Liebherr Top-Slewing Tower Crane 180 EC-H 10 Litronic – 60 m jib, 10 t lifting capacity; 45,456 Top-slewing tower crane with Litronic control system, offered as upper crane unit without tower sections. Manufacturer: Liebherr Model: 180 EC-H 10 Litronic Gjdoyy I R Dspfx Albouc Year of manufacture: 2006 Serial number: 45,456 Jib length: 60.0 m Maximum lifting capacity: 10,000 kg Lifting capacity at 60 m: 2,200 kg Configuration: Upper crane (without tower) Control system: Litronic Jib length and hook height can be extended upon request!

Condition: used, Year of construction: 2006, Liebherr Top Slewing Crane 180 EC-H 10 Litronic – 40 m jib, 10 t lifting capacity, 44.997 Top-slewing tower crane with Litronic control, offered as upper crane part without tower. Manufacturer: Liebherr Model: 180 EC-H 10 Litronic Serial No.: 44.997 Year of manufacture: 2006 Jib length: 40.0 m Maximum lifting capacity: 10,000 kg Lifting capacity at 40 m: 4,750 kg Version: Upper crane (without tower) Control: Litronic Jib extension possible upon request! Gedpfx Alsyy I Ivobeuc

Condition: used, Year of construction: 2000, machine/vehicle number: LC572, Technical Specifications & Performance Data Engineered for continuous olive oil extraction and seamless downstream packaging, this second hand line pairs traditional granite milling with modern separation. It can interface with a used bottling line for edible oil in PET or glass containers, supporting efficient industrial packaging workflows. Throughput: up to 2,500 kg/h (≈2.5 t/h) of olives, continuous duty Year of manufacture: 2000 Condition: READY FOR OPERATION Primary process stages: reception and elevating conveyors, washing/deleafing, four-wheel granite stone mill, malaxation (4 stainless tanks), vibrating screen, Barracane 4015 decanter centrifuge, Alfa Laval final separator (approx. 2000 L), centralized electrical panel Key components (sample): Various Equipment – Barracane 4015 decanter (2000), elevating conveyor, stainless malaxers with gear-driven paste pumps, Alfa Laval polishing separator Container types downstream: PET and glass as standard; compatibility with metal cans possible upon integration Typical oil packaging range downstream: 250 ml to 5 L (format depends on connected filler/capper) Materials in contact: food-grade stainless steel in malaxers, enclosures, and wetted parts Advanced Automation & Control Systems A centralized electrical panel manages motors, pumps, and malaxation temperatures for stable, repeatable extraction. The control architecture supports integration with bottling functions such as rinsing, filling, capping, and labeling for beverage production environments. Centralized start/stop, emergency stops, and status indicators Temperature control for malaxers to preserve organoleptic quality Variable-speed drives for conveyors and pumps to balance flow to the decanter Gjdpfxsw Ag T Aj Albouc PLC/HMI-ready I/O for line supervision, recipe management, and alarms Electrical supply: three-phase industrial standard (e.g., 400 V, 50 Hz) with protective breakers Production Line Integration Capabilities Designed for easy pairing with downstream oil bottling equipment, the line can feed buffer tanks or directly supply a used bottling line for PET or glass. Interfaces support quick connection to rinsers, volumetric or weight-based fillers, cappers (ROPP, screw), labelers, and date coding/traceability modules typical of industrial packaging systems. Sanitary tri-clamp and flanged connections for rapid hook-up Flexible flow control to match filler speeds and minimize bottlenecking Compatible with conveyors, accumulation tables, and case packing systems Format agility for common edible oil SKUs without major hardware changes Machine Condition & Maintenance History In READY FOR OPERATION condition, this second hand Barracane-based system shows robust mechanical integrity and clean stainless surfaces in process-critical areas. Regular servicing has preserved performance of the granite mill, malaxers, and separator set, allowing immediate deployment and straightforward commissioning within an existing plant. Operational Performance & Versatility The granite stone mill ensures gentle crushing, while controlled ...

Condition: used, Year of construction: 2000, Complete Mini Dairy Line – Seital 05X Separator + Malldison 1,000 L/h Self‑Heated Pasteuriser + Fords Little Gem 6/2 Glass Pint Bottle Filler Ideal for: Small dairies, farm bottling, cream production, test plants and product development. Line is designed for approx. 1,000 L/h milk processing into glass pint bottles. 1) Seital 05X Cream Separator • Make/Model: Seital 05X disk‑stack centrifuge • Application: Milk clarification / cream separation • Typical capacity: up to approx. 1,000 L/h (depending on product and setup) • Construction: Stainless steel product contact parts • Features: • Designed for continuous operation in dairy service • Compact footprint – suitable for small plants/farm dairies • Complete with bowl, drive and base frame • Condition: Used, in good overall condition; available for inspection • Suitable for: Whole milk separation into cream and skim milk prior to pasteurisation or standardisation. 2) Malldison 1,000 L/h Self‑Heated Pasteuriser • Make: Malldison • Capacity: 1,000 L/h • Type: Self‑heated HTST plate pasteuriser – no separate external boiler required • Product: Cow’s milk (also suitable for similar liquid dairy products) • Key features: • Plate heat exchanger with regeneration, heating, holding and cooling sections • Self‑contained heating system (self‑heated) for convenient installation Guodpfsy Rk T Aex Albsc • Designed for standard dairy temperatures (e.g. 72–75°C for 15 seconds, depending on setup) • Includes balance tank, pumps and control panel (as pictured / supplied) • Condition: Used, previously in dairy service, offered as is / tested prior to dispatch (as agreed). 3) Fords “Little Gem” 6/2 Glass Pint Bottle Filler • Make/Model: Fords “Little Gem” • Type: 6/2 rotary filler for glass pint milk bottles • Configuration: • 6 filling heads, 2 capping stations (6/2) • Suitable for returnable glass pint bottles • Application: • Filling pasteurised milk into pints for local delivery / farm shop / retail • Compact machine ideal for small to medium‑scale bottling • Features: • Stainless steel contact parts • Adjustable for standard UK‑style glass pint bottles • Simple, robust design with easy operation and cleaning • Condition: Used, good working order when last in production; inspection and test run available by arrangement. Line Summary This package offers a complete small‑scale milk processing and bottling line: 1. Seital 05X – separation of cream and skim milk 2. Malldison 1,000 L/h self‑heated pasteuriser – HTST pasteurisation without external boiler 3. Fords Little Gem 6/2 – rotary filling of glass pint bottles • Approximate throughput: up to 1,000 L/h (depending on product and operating conditions) • Ideal for: farm dairies, local milk brands, glass bottle milk delivery or artisan dairy operations. Additional Services (optional – include what you actually offer) • Loading and packing for transport • Assistance with installation/start‑up emote or on‑site by agreement • Export documentation if required

Condition: used, Year of construction: 2016, x-travel 1.020 mm Gjdpfxeyw Tm Ej Albouc y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, HESS RH500 1998r control panel 2 moulds hydraulics conveyor Guodpfx Asyx Hx Rslbec

Condition: good (used), basket dimensions 0 control 0 total power requirement 0 kW weight of the machine ca. 0 t ELMA TI-H-10 Multi-Frequency Ultrasonic Cleaning Device ? Multi-frequency version with 35/130 kHz: 35 kHz for cleaning oils and greases from hard surfaces such as metal, glass, and hard gemstones. 130 kHz for cleaning delicate surfaces in jewelry and electronics. ? Degas function for effective degassing of the cleaning fluid ? Sweep function for optimal sound field distribution Gusdpfxsyfh Rts Albsc ? Adjustable ultrasonic power ? Special stainless steel vibrating tanks for robust use and long service life ? Timer for ultrasound, adjustable from 0-15 min. and continuous operation ? Heating control from 30-80°C Technical Data Mains voltage (Vac) 230V 1 Ph. / 1N / 1 PE Total power consumption (W) 1000 Effective ultrasonic power (W) 200 Maximum ultrasonic power* (W) 800 Heating power (W) 800 Usable volume (liters) 8.6 Weight (kg) 14.8 Tank material: Stainless steel Housing material: Stainless steel 1.4301 External dimensions (W / D / H) (mm) 390 x 330 x 410 mm Usable dimensions W / D / H (mm) 300 / 240 / 140 With basket

Condition: good (used), Year of construction: 1971, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 0.37 kW -Flow rate: 10m³/h -Max. pressure: 0.15 bar Gedob A E Uuspfx Albouc -Speed: 1370 rpm -Weight: 20 kg

Condition: good (used), Year of construction: 1995, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump Gujdjd Tvunopfx Albec -Drive: 0.37/0.45 kW -Flow rate: 10/12 m³/h -Max. vacuum: 0.85 bar -Speed: 1420/1700 rpm -Dimensions: 360/200/220 mm -Weight: 16 kg

Condition: good (used), Year of construction: 1987, Vacuum pump, rotary vane pump -Manufacturer: Becker, vacuum pump type VT 3.10 -Drive: 0.37 kW / 1420 rpm -Volume flow rate: 10 m³/h -Suction pressure: -850 mbar -Dimensions: 420/190/H285 mm Gujdot E D Dzjpfx Albjc -Weight: 15 kg

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Godpfohx R Etjx Albeuc Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Thomas, Rotary vane vacuum pump -Type: VTE 10 27740125 -Drive: 0.35 kW / 2700 rpm -Vacuum: 150 mbar -Flow rate: 10 m³/h Guodpfx Asyknh Aslbec -Dimensions: 265/160/H155 mm -Weight: 10.2 kg

Condition: new, functionality: fully functional, machine/vehicle number: 1.286-960.0, operating pressure: 250 bar, high-pressure hose length: 10,000 mm, empty load weight: 70 kg, input voltage: 400 V, warranty duration: 24 months, The HD 10/25-4 S Plus cold water high-pressure cleaner is ideal for ergonomic and user-friendly operation. With the Kärcher EASY!Force Advanced trigger gun, it can be operated comfortably without holding the gun. Pressure and water flow can be adjusted using the Servo Control regulator between the lance and trigger gun. The pressure reduction allows for quick response to sensitive surfaces – without changing the nozzle. In addition, the Vibrasoft rotor nozzle significantly reduces vibrations on the spray lance. Assistance systems and an LED status display simplify operation. Technical Specifications: Condition: NEW Catalog Number: 1.286-960.0 Current Type (Ph/V/Hz): 3 / 400 / 50 Flow Rate (l/h): 500-1000 Working Pressure (bar): 80 - 250 Maximum Pressure (bar): 280 Inlet Temperature: max. 60°C Power Rating (kW): 8.8 Connection Cable (m): 5 Weight (with accessories) (kg): 70.3 Dimensions (L × W × H) (mm): 607 x 518 x 1063 Guedsxpf Hxjpfx Albjc Included: Handgun: EASY!Force Advanced + Softgrip Insert Hose: 10m DN8, 315 bar - Premium Quality Spray Lance: 1050 mm Power Nozzle Dirt Blaster Servo Control Features: 4-pole three-phase motor with air and water cooling 3-piston axial pump: with stainless steel pistons Pressure shut-off Integrated fine water filter Oil level sight glass Brass water inlet Design: - Compact upright design concept thanks to vertically mounted motor and pump unit - Small footprint and space-saving external dimensions. Easy to maneuver and transport. Maximum stability ensures the device remains stable. - Slow-running 4-pole motor with water and air cooling, robust pump with stainless steel pistons and brass cylinder head - Long service life with low maintenance costs. High performance with high efficiency. With suction function and water temperature up to 60°C. Advantages: - Ergonomic Vibrasoft dirt blaster, reduces vibrations by up to 30%. Reduces noise and sound levels. Enables effortless and extended work with the rotary nozzle. - Assistance systems and LED status display - Pressure and water flow are adjustable using the servo control regulator between the lance and gun.- EASY!Force Advanced for fatigue-free work without holding forces.

Condition: ready for operation (used), functionality: fully functional, Ready slaughterhouse Complete slaughter line – the system integrates specialized machines at every stage – from animal reception and stunning, through scalding and organ removal, to final cutting, cooling, and packaging. The modular design ensures scalability, allowing for expansion or configuration adjustments as production needs evolve. Thanks to advanced automation and ergonomic solutions, the line minimizes manual labor while improving operator safety and work efficiency. This turnkey solution has been designed for reliable, high-performance operation in compliance with EU regulations, making it an ideal investment for modern meat processing plants.Wydajność linii: Line capacity: 80–120 pigs per hour Scalability: thanks to independent subsystems and automation The line includes the following elements: 1. Animal Receiving and Handling Location: animal scales, Office vestibule, Livestock Separation Equipment: Animal scales – accurate weighing of livestock (capacity: up to 120 pcs/hour) Hand and apron disinfection washers – ensure staff safety 2. Stunning and Bleeding Location: Loop washer, Unit feeder, Equipment: Electric stunner for pigs Bleeding conveyor Trays for blood collection Loop washer with lowering mechanism – capacity: 100-120 pcs/h 3. Parboiling and scalding Location: Parboiling and bristling Equipment: Parboiling tub Brushing machine (star) Automatic positioning system – 80-120 pcs/h 4. Preliminary Dissection and Evacuation of Organs Location: Intestine Separator, Stomach Emptying Table Equipment: Intestine and gastric cleansing lines Gastric centrifuge Blowing system – up to 120 pcs/hour 5. Dissection Proper Location: Dissection Equipment: Upper cutting line Inspector platforms Carcass conveyor Quality marking stations Aprons, disinfection equipment 6. Cooling and Separation Gsdpfxjwu U Irj Albeuc Location: Separation cooler Equipment: Hanger system Overhead carts Palletizing and final weighing area 7. Cleaning, Waste and Packaging Location: Packaging and Waste area Equipment: Material separator Tray packer Pallet wrapper Advantages of complete pork slaughter line: Our complete pig slaughter line is designed to process up to 120 pigs per hour with optimal hygiene and efficiency. Each processing stage -from stunning to final packaging- is fully equipped with specialized machinery tailored to industry standards. The modular system allows for scalable expansion, enabling you to adapt production to your facility’s growth. Automation and ergonomic design minimize manual labor while maximizing throughput and operator safety. High-precision equipment ensures accurate weighing, clean cuts, and reliable internal organ handling. Multiple sanitation points and tool sterilization stations guarantee food safety and compliance with EU norms. This turnkey solution integrates cutting-edge technology to streamline meat processing from live animal intake to cold storage.

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. Guodpfx Ajycfw Ejlbsc This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, control type: PLC-controlled, Auction of a medicinal and spice processing line. The line is still in its original packaging and has never been used. The video shows a sample machine. The offered line consists of the following components: - ST II VIBRO W - LGU 252 - VIBRO 14 - OGK 1003-A - DOUBLE ZIG-ZAG Control system: PLC-controlled Processing capacity: 20 plants in 5–6 fractions ST II VIBRO W TECHNICAL DETAILS - Sieve length: 1,200 mm - Sieve width: 800 mm - Number of sieves: 2 - Sieve inclination: continuously adjustable from min. 5° to max. 10° - Screen perforation: according to customer requirements MACHINE DETAILS Drive - Type of drive: vibratory motors - Motor power: 2 × 0.18 kW - Motor power: 2 × 0.60 kW Machine weight: approx. 480 kg LGU 252 TECHNICAL DETAILS - Number of sieves: 2 - Sieve size: 2,500 × 800 mm - Sieve perforation: "Peterson" - Inclination adjustment: continuously from min. 20° to max. 40° - Conveyor belt with cleats: 600 mm MACHINE DETAILS - Dimensions (W × L × H): 5,000 × 1,700 × 3,000 mm Drive - Motor power: 0.75 kW Godpox Nnawsfx Albjuc - Motor power: 1.5 kW - Motor power: 1.1 kW - Motor power: 2 × 0.55 kW - Operating voltage: 380 V OGK 1003-A TECHNICAL DETAILS - Number of sieves: 1 - Number of blades: 2 - Throughput: min. 40 kg/h to max. 100 kg/h MACHINE DETAILS - Dimensions & weight - Dimensions (W × L × H): 2,440 × 1,914 × 2,525 mm - Machine weight: approx. 970 kg - Motor power: 1.1 kW - Operating voltage: 380 V DOUBLE ZIG-ZAG TECHNICAL DETAILS - Throughput: max. 150 kg/h MACHINE DETAILS - Dimensions (L × W × H): 2,400 × 2,000 × 5,000 mm - Exhaust fan: 1 GENERAL EQUIPMENT - Control 208 - PLC - Aspirator I-6 - Control 308 - Belt conveyors (12 units) - Air technology - Magnets - Speed controllers Note: The machine has been dismantled and is in storage (see photos).

Condition: good (used), Frequency converter, frequency inverter, drive inverter, controller, variable speed drive, single motor module, double motor module Manufacturer: Siemens, Sinamics Smart Line Module -Type: 6SL3130-6AE21-0AAO -Input: DC 600 V Guedshzh Epepfx Albsc -Output: 3 AC 400 V 3 A/3 A -Dimensions: 480/50/H270 mm -Weight: 4.7 kg

Condition: used, Year of construction: 2017, zpracování slabé hmoty - délka výřezů od 1300 - 4500 mm - průměr kmene od 130 - 350 mm - 100 m3 / směnná výroba - celkový příkon 230 kW. ​Vyhledat podrobnosti 137 / 5 000 Gujdpfsnqzkpox Albjc Výsledky překladu Výsledek překladu processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW

Year of construction: 2017, condition: used, processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW. Gsdenwm R Njpfx Albouc

Condition: used, Year of construction: 1988, Manufacture : Goavec SA Year : 1988 Type: storage/process tank Previous application: Cream tank (fluid/thick) Volume : 10 000 Liters Material: 304 stainless steel Jacketed (bottom and 1/3 shell): Working pressure 3.5 bar / Max. pressure: 5.25 bar Gjdpfxsx R D Duj Albouc Motor power: 0.75 kW Agitation: 2 three-bladed paddles (1 fixed / 1 removable) Washing balls: 3 units Inspection hatch: manhole Removable guardrail External dimensions: 5 x 2 metres Motor checked and tested prior to sale.

Year of construction: 1985, condition: reconditioned (used), REFORM type AR 10 type 40H face grinding machine year of manufacture 1985 30 KW grinding motor Control Modicon Magnetic control 6-stage magnet size: 1000mm300mm segment head diameter: 460mm segment dimensions: 90x38x180mm Gjdsd E Np Eopfx Albeuc Number of segments: 1 set = 8 pieces Grinding motor infeed: 0,01mm - 0,1 mm infinitely variable Hydraulic pendulum drive New supply cable between machine and control cabinet

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Gedpstgvgpofx Albeuc Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder