Used Claas Arion 470 Cis+ Ackerschlepper for sale (1,331)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,480 mm, loading space height: 3,040 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis Steel welded construction with narrow crossmember spacing and reinforced design, low-loader outer frame profile, for transporting construction machinery up to 32,000 kg and with a maximum outer width of the construction machinery of 2550 mm, kingpin plate with replaceable 2 kingpins. Rear slope of approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/diamond plate, in the low-bed, omega rail laterally at the bottom on the outer frame as a mounting rail for tarpaulin and spacers for lashing points, not in the wheel area. If a lift table is used, there is an additional, lightweight outer frame with an omega profile. 24-ton, 2-speed landing gear, single-sided operation, with a semi-circular lower part and a straight connection plate, with stroke compensation, free swivel radius to the rear approx.: 1950 mm, rear support, foldable 2 wheel chocks + holder Side underrun protection, aluminum Quarter panel fenders in front of and behind each axle Dsdpfx Alsi Riw As Aeck with anti-splash flaps behind each axle Underrun protection, steel Splash flap at the rear over the entire width 4 storage boxes, stainless steel, w=800/h=350/d=350 mm, with a polished, lockable door, 2 x on the left front and 2 x on the right front in front of the 1st axle Lift table behind the gooseneck, approx. 3000 mm long, hydraulically liftable for crossing over the gooseneck, with mechanical locking in the raised position. (Cylinder angled for good ground clearance, Fliegl standard). Operation on the right front + additional activation with a wireless remote control, lift table can be raised with the tarpaulin closed! Tarpaulin attachment in the lift table area to an additional, lightweight outer frame with omega profile, lift table can be raised with the tarpaulin closed! Lashing points can also be used in the lowered position! Lashing points Gooseneck: 4 pairs of 5-ton lashing points embedded in the outer frame 2 pairs of lashing points at the top and on the side embedded in the outer frame 8 pairs of lashing points at the top and on the side embedded in the outer frame, each 10 tons 9 pairs of 5-ton lashing points embedded in the outer frame Axles + Suspension SAF drum brake axles last axle with trailing steering knuckle, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lifting and lowering valve + auto-reset function H&S function with quick vent 1st axle, automatic lift axle, incl. forced lowering and starting assist, activated by pressing the brake pedal 3 times (starting assist is functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Axle lift below the recommended ride height, no guarantee for tire damage Wheels and tires 235/75R17.5 from leading manufacturers Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Spring brake parking brake 2 foolproof coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Axle load recognition in the truck via EBS, without installation in the truck. Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white

Condition: good (used), Year of construction: 2017, operating hours: 12,285 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, Linde H25D-02 Triplo 470 Freelift / Sideshift / 4th Function, VW Diesel, 2017 A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Djdpfx Alszhbhvs Asck

Condition: good (used), Year of construction: 2008, spindle speed (min.): 4,000 rpm, travel distance Z-axis: 500 mm, throat depth: 300 mm, Model Year: 2006 Chuck Diameter: 8" Number of Axes: 3 Length: 500 mm Swing Over Bed: 300 mm Dcodpfx Alex Nvm Ej Ask Spindle Speed (RPM): 4000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Equipment: clamp, Offer without obligations. Horizon BQ 470 Perfect Binder Year: 2018 Total counter: 600.000 Touch screen control panel 4 clamps Hand feed station Milling head Spine glue length Dcedozc El Nopfx Al Aok Cover nipping unit Milling and roughing Delivery Conveyor EVA glue tank Max. book size: 320 x 320mm Min. book size: 145 x 105mm Max. open cover size: 320 x 660mm Min. open cover size: 135 x 225mm Max. book thickness: 0.3 to 65mm Max. mechanical speed: 1,350 cycles/hr Machine is no longer in production. Available immediately. Horizon HT-30C On Demand Three Side Trimmer Serial: Counter: 600.000 Technical details Untrimmed book size Max. 320 x 235 mm (12.600" x 9.255"), Min. 200 x 134 mm (7.870" x 5.280"), Trimmed book size, Max. 305 x 230 mm (12.010" x 9.055"), Min. 200 x 134 mm (7.870" x 5.280"), Available immediately. Excellent condition - Located: Denmark Available:Immediately Price under request

Condition: used, Year of construction: 2015, Kannegiesser inclined belt conveyor Hopper Filling Funnel GF 2750-470-380 RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Dcedpsk Aa Swefx Al Aek Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum (UT): Ø = 60 mm, crowned steel, galvanized Belt return roller: Ø = 50 mm, galvanized steel, A12 IGM8 Belt: 2-layer PVC belt, black, smooth Year of construction: 11/2015 Construction / Design: CNC-lasered and edged sheet steel construction primed and painted in RAL 7035, fittings electrogalvanized, side guide 1.4016 Special feature / accessories: 1x motor coupling module incl. electrical pre-installation 3x light barrier lateral guide on both sides 70-620-840 mm / 80-390 mm high 2x emergency stop switches 1x end plate 640 mm high 1x baffle plate 1x deflection drum cover Execution centerantieb All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Condition: new, T63290IO - Armor Djdpok Abhasfx Al Asck INKANTO thermal transfer ribbon, AWR 470 wax, 90mm, black INKANTO thermal transfer ribbon, AWR 470 wax, roll width: 90mm, core: 25,4mm, length: 450m, color: black

Condition: used, mileage: 59,000 km, power: 309 kW (420.12 HP), first registration: 08/2019, fuel type: diesel, empty load weight: 12,400 kg, maximum load weight: 13,600 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,500 mm, next inspection (TÜV): 01/2027, brakes: engine braking, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, company headquarters. 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, AS-Tronic automatic transmission, differential lock, fog lights, work lights, revolving beacon, leaf and air suspension, last axle liftable and steerable, trailer coupling with air and light, container locking, rear support, side aluminium underrun protection, radio remote control, green environmental badge. Wheelbase: 3500 mm. Superstructure: VDL Tele skip-loader P-18 with radio remote control, ZF 12 TX 2620 DD gearbox, MAN BrakeMatic, M-cab, air conditioning. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to modifications, prior sale, and errors! Dcedpfsyvvvaox Al Aok

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,800 kg, maximum load weight: 29,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,350 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,650 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Tailored Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with interchangeable 2 kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower section and straight connection plate, with stroke compensation Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Splash guards in front of the 1st axle and behind each axle with anti-spray, according to EC Toolbox, stainless steel, w=600/h=400/d=500 mm, with polished door, lockable Hydraulic lift table after gooseneck, approximately 3000 mm long, hydraulically raised for crossing the gooseneck, with mechanical locking in the raised position. Operated with a wireless remote control Electric winch, 24 volts, pulling force 8165 kg, mounted centrally at the front on the gooseneck loading area, in a stainless steel box with a door (if technically possible, further review required), operated with a wireless remote control, cable length 35 m x approx. 10 mm, with roller cable guide and removable guide rollers on the gooseneck and rear slope. Tie-down points: Low-loader Gooseneck: 5 pairs of tie-down points recessed in the outer frame, each with 5 tons. 2 pairs of tie-down points in the middle, each with 5 tons. 1 pair of tie-down eyes recessed at the top and outside in the outer frame in the neck slope, each with 10 tons. Main platform: 4 pairs of tie-down points recessed in the outer frame, each with 5 tons. 4 pairs of tie-down points in the middle, each with 5 tons. 1 pair of tie-down eyes recessed at the top and outside in the outer frame, each with 10 tons. Rear platform: 4 pairs of tie-down points recessed in the outer frame, each with 5 tons. 5 pairs of tie-down points in the middle, each with 5 tons. 4 pairs of tie-down eyes recessed at the top and outside in the outer frame, each with 10 tons. Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption Last axle with steered trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via a hand button Air suspension with lift/lower valve, with holding function for lowering + auto-reset function Wheels and Tires 235 / 75 R 17.5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air brake system Spring brake parking brake Vehicle - Driving Stability System Dcjdpfxei Ri E Uo Al Ask Axle load recognition via EBS-CAN bus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) 2 fail-safe coupling heads in front, without connection cable EBS, Electronic Braking System with EBS socket in front, without connection cable Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights in front 2 white/red side marker lights in the rear Lights completely in LED version 2 x 7-pin and 1 x 15-pin fail-safe sockets in front Additional LED work lights, at the rear, switched via reversing light LED rotating beacon with holder, switched via parking light Pair of warning signs, double LED illuminated and extendable to 3000 mm Floor Gooseneck with Mega Grip, covered with interlocking grating/low-loader platfo

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 26,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, low-bed semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions, 24 tons, 2-speed landing gear, single-sided operation, with straight lower section, without thrust compensation Rear support, foldable 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear, covering the entire width Fenders in front of the 1st axle and at the rear of each axle with anti-spray, according to EC Extendable widening elements to 3,000 mm (not in rear slope) Storage compartment for timber planks in the center of the loading area Timber planks 70 mm for widening to 3,000 mm Tie-down points, low-bed 2 pairs of ring tie-down points, each 5 tons, at the front on the gooseneck 11 pairs of tie-down mushroom heads, recessed at the top and side in the outer frame, each 10 tons 2 x on the gooseneck 9 x distributed in the low-bed area First tie-down point 250 mm from the front and last max. 250 mm from the rear, distance between tie-down points not greater than 1100 mm 8 pairs of beam pockets recessed in the outer frame, inner dimensions 70 x 40 mm (can be converted to 5 ton ring tie-down points) Axles + Suspension SAF drum brake axles Air suspension Wheels and tires 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Dcsdpoi Ri E Rjfx Al Aok Braking system 2-line compressed air brake system Color-coded line routing for easy service. Spring parking brake EBS, electronic brake system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front, without connection cable with lift and lower valve Axle load recognition via EBS-CAN bus signal, for display on the instrument panel in the cab Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable 1 LED rotating beacon with holder 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel sheet covering Storage box recessed in the ramp to the gooseneck followed by 70 mm softwood floor, in the wheel arch area steel/diamond plate covering Rear slope with 70 mm softwood floor Low-bed area including rear slope 9,200 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via tractor's auxiliary drive with throttle, operation on the left side Hydraulic connection with SVK socket NW 10/3, without connecting hoses Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, Low-loader Semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without lateral support Foldable rear support 2 chock blocks with holder Aluminum side protection Fender fairings in front of and behind the axle assembly 1st pair of wheel recesses integrated into the gooseneck area in the low-bed section, angled for easy entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader models with detailed specifications (if the overall height is exceeded). Wheel recess cover, retractable from the main frame, with wood inserts. Extensions retractable to 3,000 mm (not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for timber planks on the gooseneck, across the front Timber planks, 70 mm, for extension to 3000 mm Tie-down points for low-loader 2 pairs of ring-type tie-down points, 5 tons each, at the front on the gooseneck 11 pairs of tie-down eyes integrated into the top and side of the outer frame, 10 tons each 2 x on the gooseneck, 9 x distributed in the low-loader area, first tie-down point 250 mm from the front and last max. 250 mm from the rear, spacing between tie-down points not greater than 1100 mm 8 pairs of stake pockets integrated into the outer frame, inner dimensions 70 x 40 mm, or, instead of stake pockets, 5-ton ring-type tie-down points embedded in the floor Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 keyed coupling heads at the front With raise and lower valve Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab; truck must be suitably pre-equipped. Vehicle - Driving Stability System Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole keyed sockets at the front 1 x LED rotating beacon with holder, switched via side lights 2 pairs of warning signs, double LED illuminated and retractable to 3,000 mm, detachable with connector Floor Gooseneck with steel/non-slip steel plate Storage box integrated into the access slope to the gooseneck Then with 70 mm softwood floor, in the wheel recesses at the bottom and in the wheel well area, steel/non-slip steel plate Low-loader platform including rear slope, 9,100 mm Dsdpfxsi Ri Hcj Al Aock Ramps Steel ramps, 2,800 mm long, 750 mm wide, side-shiftable Additional ramp securing at the bottom.

Condition: used, Year of construction: 2004, BIGLIA B 470 YSM LATHE LATHE WITH Y AXIS SUB-SPINDLE 2 MOTORIZED TURRETS FANUC 18i-TB CNC CONTROL CAPACITY: Max working diameter from bar (main spindle/sub-spindle): 68/45 mm Max working diameter (chucking, main spindle/sub-spindle): 200/160 mm Max working length (main spindle/sub-spindle): 300/200 mm Max swing diameter (main spindle/sub-spindle): 200/160 mm Bar passage (main spindle): 65 mm SPINDLE: Main spindle/sub-spindle speed range: 100–4000 / 100–4000 rpm Spindle nose (main spindle/sub-spindle): ASA 6'' / ASA 5'' Spindle bore (main spindle/sub-spindle): 80/56 mm Spindle motor power (50% duty cycle) (main spindle/sub-spindle): 22-26 / 5.7-7.5 kW UPPER/LOWER TURRET: Number of driven tool positions: 12 Driven tool speed range: 100–3000 rpm Drive motor power: 1.1–3.7 kW (25% duty cycle) AXES: X-axis travel (main spindle/sub-spindle): 160/158 mm Z-axis travel (main spindle/sub-spindle): 390/240 mm Y-axis travel (main spindle): 100 mm (40-60) B-axis travel (sub-spindle): 420 mm C AXIS (CONTROLLED): Minimum programmable value: 0.001° DIMENSIONS: Overall dimensions with chip conveyor: 4107 x 2128 x 2204h mm Dcedpey Ndx Asfx Al Ajk EQUIPPED WITH: – Chip conveyor

Condition: like new (used), Year of construction: 2012, operating hours: 46,000 h, functionality: fully functional, clamping force: 1,500 kN, Arburg Golden Edition 470-1500-400 from 2012 In perfect technical condition Injection unit: Screw diameter: 40 mm Injection weight: 180 g Injection pressure: 2000 bar Tie bar distance: 470x470 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: The machine is in excellent technical condition Operating hours: 46,500 h in automatic mode Robot interface Color dosing unit interface Dcedoy Iupijpfx Al Aek Hydraulic core pull x 1 Reinforced injection units – bimetal Air x1

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x500x2000 mm Dcedpfjvz Evbex Al Aok Weight 180 kg Total power requirement 2,57 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 840x540x1980 mm Weight 158 kg Total power requirement 2,1 kw Dcedpfx Alsvz Hdas Ask

Condition: reconditioned (used), functionality: fully functional, Fortuna UAF470 Surface Splitting Machine – Leather Splitting Machine Dcedpey Dvhlofx Al Aok Main features: - Working area: 470 mm - Material feed: upper and lower roller - Automatic knife positioning - 3 material feed speeds - Manual material return - Dust collector and waste bin Machine in perfect technical condition, fully refurbished

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock and ready for shipping Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Dcjdpfx Ajiv Imnol Ask Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: used, mileage: 5,63,000 km, Year of construction: 2006, 3-axle truck with 26t GVW, equipped with a 26t hooklift system, payload 14,320 kg, wheelbase 4,100 mm, sleeper cab, automatic transmission with clutch, trailer towable. Dodpfx Ajy N U T Djl Asck Note: The vehicle description is indicative and may contain errors or inaccuracies. Please contact us to verify the accuracy of the information.

Condition: repair required (used), functionality: not functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from the Arburg brand and the type 470 C 1600-800 Dedpfx Aev Edrisl Asck The pump and a card have been removed from the machine, so the machine is being sold as defective. It is otherwise in very good condition Technical data: Pump hours: 61,400 Clamping force: 1600 kN Clear column spacing: 470*470 Ejector travel: 225 mm Screw diameter: 50 mm Displacement: 398 cm³ Dimensions: 4335*1635*1950 mm Weight: 6950 kg The machine is offered without peripherals Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: excellent (used), Year of construction: 2011, operating hours: 55,806 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 4,850 kg, For sale is an Arburg injection moulding machine, model 470 C 1500-400. The offer includes Arburg handling, type Multi Select Axis X/Y/Z 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: Dcedpfow E Itiex Al Ask Year of manufacture: 2011 Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours: 55,806 h (pump) Injection unit: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Dimensions: approx. 4,700 x 1,700 x 2,000 mm Weight: 4,850 kg Transport and loading can be organized Europe-wide upon request (at extra cost). All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: ready for operation (used), * Brand: MFL * Type: R-CI 100-100 * Feed opening: 1020 x 760 mm * Power: 90 kW E-Motor * Weight: 9 Tons Dcsdpeywm Iisfx Al Aok

Condition: good (used), Year of construction: 2005, functionality: fully functional, TRENNJAEGER TUS 470 with ball screw and heavy-duty spur gear for burr-free cold sawing of profile, panel, square, and round material in straight and miter cuts, pivotable on both sides from 90 degrees to 45 degrees to 30 degrees, with digital angle display (built in 2005) - Cutting range with saw blade ᴓ 450 mm: 90°, 45° right/left, 30° right/left - Round 140 mm 140 mm 130 mm - Square 110 x 110 mm 110 x 110 mm 110 x 110 mm - Rectangular 290 x 40 mm 190 x 40 mm 130 x 40 mm Dodjv Ryaaepfx Al Asck - Rectangular Profiles 290 x 70 mm 190 x 70 mm 130 x 70 mm This increases by approximately 10 mm for a saw blade ᴓ 470 mm - Maximum clamping range of the machine: 290 x 150 mm - Working height: 900 mm Machine is supplied without infeed and outfeed

Condition: used, Hard stone plate, granite plate, granite block Hard stone block, angle block, precision-machined on all sides Measuring cube, measuring plate Dodpfxog Uar De Al Asck Length: 1590 mm Width: 300 mm Height: 470 mm - 2 pieces of Ø 80 mm bores - 2 pieces of Ø 120 mm bores - Threaded inserts, mostly M16, some with M12 and M18 Weight: 570 kg Good condition

Condition: good (used), mileage: 5,38,605 km, power: 346 kW (470.43 HP), first registration: 02/2004, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, fuel: diesel, color: white, gearing type: mechanical, number of gears: 12, emission class: euro3, suspension: steel, permissible axle load (axle 1): 8,500 kg, permissible axle load (axle 2): 10,800 kg, permissible axle load (axle 3): 9,200 kg, Year of construction: 2004, = Further options and equipment = - Parabolic suspension - Power take-off (PTO) = Notes = Scania T124-470 6x2 - Tipper - Manual gearbox - Full steel suspension - Robson Drive - New engine - Torpedo/bonnet cab MY: KM: 538,605 YS2T6X20001293868 Djdpfx Aoy Rn Epol Aock Tipper Robson drive Manual gearbox Full steel suspension Engine has been replaced = Further information = Technical details Number of cylinders: 6 Engine capacity: 12,000 cc Gross vehicle weight: 28,500 kg Axle configuration Suspension: Leaf spring suspension Front axle: Tyre size: 385/65R22.5; Max. axle load: 8,500 kg; Steering axle; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 1: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 10,800 kg; Tyre tread left inner: 30%; Tyre tread left outer: 30%; Tyre tread right inner: 30%; Tyre tread right outer: 30% Rear axle 2: Tyre size: 315/80R22.5; Twin tyres; Lift axle; Max. axle load: 9,200 kg; Tyre tread left inner: 30%; Tyre tread left outer: 30%; Tyre tread right inner: 30%; Tyre tread right outer: 30% Functional Tipping body: rear tipper Condition Technical condition: average Visual condition: good Further information Please contact VAEX The Truck Traders for more information.

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, first registration: 12/2020, loading space volume: 34 m³, total length: 6,280 mm, total width: 2,550 mm, total height: 3,920 mm, suspension: steel-air, tire size: 385/65 R 22.5, wheelbase: 3,900 mm, color: white, Year of construction: 2020, Equipment: ABS, = Additional options and accessories = - Aluminum fuel tank - External thermometer - Heated exterior mirrors - Passenger seat - Leaf suspension - On-board computer - Hands-free kit - Roof hatch - Roof spoiler - Digital tachograph - Electric windows - Electrically adjustable exterior mirrors - High beam headlights - Speed limiter - Cruise control - Lift axle - Air conditioning - Refrigerator - Alloy wheels - Air suspension - Air horn - Navigation system - Fog lights - Particulate filter - Reversing camera - Sleeper cab - Side door - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Central lubrication - Central locking system = Additional information = General information Number of doors: 2 Registration number: 57-BPX-3 Technical information Engine power: 346 kW (470 hp) Number of cylinders: 6 Engine displacement: 12,419 cc Drivetrain Fuel type: Diesel Djdpfx Alsy R Atne Aock Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65 R 22.5; Alloy rims; Max. axle load: 9,000 kg; Steering; Tire tread left: 30%; Tire tread right: 60%; Suspension: Leaf suspension Rear axle: Tire size: 315/80 R 22.5; Twin mounted tires; Differential lock; Alloy rims; Max. axle load: 11,500 kg; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 50%; Reduction: single reduction; Suspension: Air suspension Weights Kerb weight: 7,312 kg Payload: 13,188 kg Gross vehicle weight (GVW): 20,500 kg Functional Superstructure brand: LAKO T344 RMO JANSKY OPTIMATE Pump: Yes Hoses: Yes Interior Number of seats: 2 Environment Emission class: Euro 6 Maintenance, history, and condition APK (Roadworthiness test): valid until 12/2026 Technical condition: very good Optical condition: good

Condition: good (used), Year of construction: 2009, operating hours: 9,714 h, load capacity: 1,800 kg, lifting height: 4,697 mm, fuel type: gas, mast type: triplex, construction height: 2,150 mm, Still RX 70-18 Triplex 470 Freelift / Sideshift / 4th Function LPG 2009 Video can be sent via Whatsapp. Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. carries a rotating stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition, without warranties. (see our general terms and conditions) You are welcome to schedule a viewing and/or test drive without obligation. Please call in advance as we are not always present. Dcjdpfjy Nbr Tsx Al Aek Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland