Used Connection Line for sale (22,362)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: P260302015, total height: 350 mm, total width: 300 mm, total length: 800 mm, overall weight: 80 kg, machine base height: 180 mm, INVENTORY STATUS: 3 UNITS For sale is a professional, multi-section process module manufactured to hygienic standards, designed for the food, brewing, or chemical industries. Main components of the set: Hfedpfx Aezrmvaoftjl • Pumps: Series of centrifugal pumps with stainless steel housings (protection against flooding/hygienic standard). • Flow measurement: Integrated electromagnetic flowmeters (visible control units with LCD displays, e.g., from Endress+Hauser or a similar class). • Construction: The entire unit is mounted on a stable stainless steel frame (skid type), which facilitates transport and installation in a new production line. • Piping: Complete acid-resistant piping with flanged and hygienic connections. Key advantages: • Precision: Thanks to the flowmeters, the system allows for very accurate dispensing of liquids or monitoring of media transfer. • Hygiene: Stainless steel construction allows operation in CIP (Cleaning In Place) systems. • Ready for operation: Complete module ready to be connected to an existing process installation. Technical condition: Very good, the installation is regularly serviced and operates in a clean production environment.

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 30,000 mm, drilling capacity: 40 mm, type of input current: three-phase, total width: 3,500 mm, drill diameter: 40 mm, input voltage: 400 V, FICEP HP35T - CNC SAWING & DRILLING LINE FOR ANGLE STEEL | YEAR 2012 | RECONDITIONED The Ficep HP35T is a CNC-controlled sawing and drilling line for the economical series processing of angle steel (L-profiles) in structural steelwork. Sawing and drilling run in a single automated pass with DSTV data connectivity, reducing handling, marking time and scrap for beam connections, gusset plates and lattice structures. CONDITION & RECONDITIONING Reconditioned and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The HP35T processes equal- and unequal-leg angle steel (L-profiles) up to 350 x 350 mm leg dimension and combines sawing with two drilling spindles (max. dia. 40 mm) into one continuous machining process. Material is fed via a motorized infeed roller conveyor, hydraulically clamped and positioned under CNC control. The PC-based Ficep CNC control enables manual programming at the operator terminal as well as direct program import from structural-steel CAD systems (e.g. Tekla, SDS/2, BOCAD) via DSTV. Typical applications: structural steelwork and profile processing, lattice and mast structures, plant and steel hall construction, gusset plates and beam connections. TECHNICAL DATA - Manufacturer: Ficep | Model: HP35T | Year: 2012 | Serial number: 25029 - Machine type: CNC angle processing line (sawing & drilling line) - Condition: used, reconditioned by certified technician - Cutting process: saw - Drilling spindles: 2 x drilling spindle, max. drill dia. 40 mm - Clamping: hydraulic - Profile type: equal- and unequal-leg angle steel (L-profiles) - Max. leg dimension: up to 350 x 350 mm | Min. profile: approx. from 50 x 50 x 5 mm - Feed rate (max.): approx. up to 40 m/min - Positioning accuracy, longitudinal axis: approx. +/- 0.2 mm - Hydraulic unit motor: approx. 15 kW | Feed motor (servo): approx. 3 kW - CNC control: Ficep proprietary / PC-based - DSTV interface: direct import from structural-steel CAD - to be confirmed during inspection - Electrical connection: 400 V / 50 Hz / 3-phase + N + PE (TN-S), control voltage approx. 24 V DC Hodpsxn T Smofx Aftefl - Overall machine length: approx. 30,000 mm (line incl. roller conveyor; exact dimension before loading) - Machine width: approx. 3,500 mm | Machine weight: on request Note: Values marked "approx." are reference figures and will be confirmed bindingly during inspection. SCOPE OF DELIVERY - 1 x Ficep HP35T angle steel processing line (year 2012) - 1 x hydraulic unit (integrated) - 1 x CNC control unit with operator terminal - 1 x infeed roller conveyor (motorized) - 1 x electrical control cabinet - 1 x machine documentation / operating manual (Italian/English) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, The line consists of one Juki KE-2070 pick-and-place machine, one Juki KE-2080 pick-and-place machine, one Juki RS-800 reflow soldering oven and a cooling unit (chiller), 1) Juki KE-2070 pick-and-place machine, permissible component height SC: 6mm, NC: 12mm, PCB dimensions Medium: 330x250mm, Large: 410x360mm, Extra Large: 510x460mm, transport direction: right-to-left or left-to-right, transport height: 900mm +/-20mm, 950mm +/-20mm, 2) Juki KE-2080 pick-and-place machine, permissible component height NC: 12mm, HC: 20mm, EC: 25mm, PCB dimensions Medium: 330x250mm, Large: 410x360mm, Extra Large: 510x460mm, transport direction: right-to-left or left-to-right, transport height: 900mm +/-20mm, 950mm +/-20mm, 3) Juki RS-800 8-zone reflow soldering oven, number of heating zones: top 8, bottom 8, heating zone length: 3121mm, number of cooling zones: top 2, cooling zone length: 800mm, exhaust air volume: 10m³/min x2 exhaust connections, heat-up time: approx. 25min, temperature setting range: room temperature to 300°C, temperature control: closed-loop PID control + SSR, PCB width: 50-450mm, transport height: 950mm +/-20mm, transport speed: 300-2000mm/min, chain lubrication: automatic lubrication, cooling method: forced-air cooling, connected load: 64kW, power consumption during start-up: approx. 35kW, power consumption during normal operation: approx. 8.5kW, length: 5314mm, width: 1417mm, height: 1524mm, weight: 2.25t, 4) Cooling unit (chiller). An on-site inspection is possible. Hjdpfxszwfrds Aftefl

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Hodpszxdqzjfx Aftefl Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1711, This industrial multi-blade band sawmill line (multi-head band resaw) is designed for high-volume log and timber resawing. Constructed on a robust steel frame, the machine features a highly efficient 8-head configuration, where each individual cutting unit is powered by its own dedicated electric motor for maximum performance. The machine is equipped with 15 kW motors and operates with standard 38 mm x 5025 mm saw blades. A key technical advantage of this line is its versatility: every other saw head can be tilted up to 30 degrees. This specific function allows the machine to cut diagonal FE (featheredge / weatherboard) boards up to 175 mm in width. Hfjdpfszudynox Aftjl Material feeding is handled by a heavy-duty steel chain conveyor system that ensures stable and precise timber positioning throughout the cutting process. Manufactured in Latvia, the machine is completely ready for continuous professional sawmill operation. It is still connected and can be started.

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Hfsdjz Abkyspfx Aftol

Condition: good (used), Year of construction: 2007, functionality: fully functional, total width: 4,015 mm, total length: 13,640 mm, total height: 940 mm, overall weight: 8,300 kg, input current: 32 A, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, pressure: 6 bar, cutting length (max.): 3,700 mm, Project / Item: Used Hegla glass cutting line (year of manufacture 2007) Hegla EcoLam 37 Plus: Laminated safety glass (LSG) cutting system with integrated loading arms. (2007) Hegla LT 2034: Fixed transport table for glass transfer within the cutting line. (2007) Hegla LKTR 7034: Combined transport and tilting table, equipped with air cushions and conveyor belts. (2007) 2. TECHNICAL SPECIFICATIONS OF THE SYSTEMS 2.1 Hegla EcoLam 37 Plus (LSG cutting system) - Equipment: Integrated loading arms for automatic/manual glass handling - Dimensions: Length: 3,280 mm | Width: 4,780 mm | Table width: 4,015 mm - Working height: 940 mm - Maximum glass dimensions: 6,100 mm x 3,210 mm - Maximum cutting length: 3,700 mm - Stop length: 160 mm to 2,000 mm - Cutting accuracy: +/- 0.5 mm - Weight: 4000 kg - Glass thickness (LSG): 2 x 3 mm to 2 x 8 mm - PVB film thickness: 0.38 mm to 3.8 mm - Connection values: 3 x 400 V / PE, 50 Hz | Power: 20 kW - Air pressure: 6 bar 2.2 Hegla LT 2034 (Transport table) - Function: Fixed station for intermediate transport - Dimensions: Length: 2,000 mm | Width: 3,400 mm - Working height: 3,400 mm - Weight: 800 kg - Maximum glass dimensions: 3,210 mm x 6,100 mm - Connection values: 3 x 400 V / PE, 50 Hz | Air pressure: 6 bar 2.3 Hegla LKTR 7034 (Transport and tilting table) - Function: Transport table with tilting function, integrated conveyor belts and air cushion system - Dimensions: Length: 7,000 mm | Width: 3,450 mm - Working height: 940 mm - Total weight: approx. 3,500 kg Hfedoz Apcwepfx Aftsl - Connection values: 400 V, 50 Hz | Power: 11 kW (according to layout drawing max. 17 kW / 45A) | Air pressure: 6 to 8 bar Total length of the core line: 13,640 mm - EcoLam area: 4,610 mm - LT area: 2,030 mm - LKTR area: 7,000 mm

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Hsdpfsyhcabex Aftjfl Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 2013, condition: good (used), functionality: fully functional, working width: 2,300 mm, Equipment: documentation/manual, GTA, Standard Line, 2300 mm (Low-E) Horizontal glass washer-dryer Manufacturer: Glastechnik-Anlagenbau, Germany Hedpewplgbofx Aftsfl Year of construction: 2013/2014 6 brushes, diameter: 160 mm Working width: 2300 mm Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Feed speed: 2 - 8 m/min. Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good working condition. Disassembled and ready for transport.

Condition: used, Year of construction: 2021, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 505 IE 2021, tank capacity: 300 l, usable tank capacity: 300 l, total length: 1,120 mm, total width: 1,120 mm, total height: 1,000 mm, inner diameter: 900 mm, outer diameter: 1,000 mm, overall weight: 400 kg, wall material: stainless steel, wall thickness: 25 mm, wall structure: double-walled, number of chambers: 1, manhole diameter: 500 mm, manhole location: front, reception height: 500 mm, discharge height: 500 mm, operating temperature: 10 °C, operating pressure: 3 bar, pressure (max.): 2.55 bar, power: 38 kW (51.67 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, The core Thissen & Stecher TSRR series is primarily manufactured as an indirectly heated electric vessel. However, Thissen & Stecher designs for energy input from gas. The specific factory physical and structural dimensions for the TSRR 300-liter core chassis provide the official footprint for this unit: 📐 Structural Dimensions (300L Chassis) Internal Diameter: Ø 900 mm Internal Depth/Height: 500 mm External Width: 1,120 mm External Depth: 1,250 mm External Height: Approx. 1,000 mm to the lip (excluding top-mounted lid clearance/venting arrays). ⚖️ Weight: Net Weight (Empty): The baseline unit weight ranges between 380 kg and 450 kg, depending on the reinforced frame option and agitator configuration. Operating Weight (Full): Approx. 680 kg to 750 kg when loaded to its full 300L liquid capacity. 🔥 Gas Heating & Utility Requirements. Fitted with a gas burner jacket, the unit utilizes an indirect thermal jacket fluid or a direct-fired bottom array. Thermal Power Output: Typically engineered between 38 kW and 44 kW to manage a rapid heat-up curve for a 300L volume. Gas Connection Port: 3/4 inch or 1 inch standard gas line connection. Electrical Supply (For Agitator): Requires a 3-phase 400V / 50Hz connection to power the bottom-driven heavy-duty scraping agitator. Hjdpfx Aozzxcwjftefl ⚙️ Operational Features: Agitator System: Bottom-driven stable agitator with standard stepless speed regulation from 10 to 60 RPM. Tilt Angle: Built with an integrated 5° oblique slope toward the front outlet valve to guarantee smooth product discharge and improved mixing geometry. Controller: Standard integration of the Aditec MIC 900 microprocessor supporting multi-step cooking programs.

Condition: excellent (used), FOR SALE: Complete Automatic Production Line for Paints, Primers, Undercoats, and Acrylic Plasters - DIAMAC (Italy) For sale: a highly efficient, professional industrial line from the renowned Italian manufacturer DIAMAC. The installation is in ideal condition - it has been used only a dozen times. KEY ADVANTAGES & WORKFLOW: Continuous production cycle (zero downtime): While the operator unloads the first tank via the filling line, the next batch of finished product is being prepared in the second dissolver. Complete system: The installation comes fully equipped with all necessary pumps, transport pipelines, filters, and electrical control cabinets. Full documentation: The machines include a complete set of design drawings, electrical schematics, technical documentation, operating manuals, and CE certificates. PRODUCTION LINE COMPONENTS: Main Dissolver Unit: 2 x Stationary Dissolver 50 HP (2 x 1500 L) with Inverter: Mounted on a high steel support structure (platform + stairs) Made of stainless / acid-resistant steel (INOX) Automatic control and cycle programming Automated dosing/filling for water, 4 types of resins, and dry/powder raw materials Integrated washing system: automatic water supply for tank cleaning + discharge of wastewater to separators (allows reuse of purified water) Direct connection to the semi-automatic filling machine Stationary Dissolver 30 HP with Inverter (2500 L) Slow-speed Stationary Mixer 10 HP (6000 L) Column Dissolver 15 HP with Inverter + dedicated tank/vessel Laboratory Dissolver 2 HP with Inverter (stepless speed adjustment for testing and formulation) Industrial Tinting System (Dosing & Coloring Unit): High steel support structure with 16 INOX stainless steel tanks and slow-speed mixers. Application: production of colored paints or multi-component specialty products (up to 16 additives). Hjdpfxoztwp He Aftjfl Upgrade options: Currently configured for manual operation, but fully prepared for semi-automatic production (gravimetric/volumetric dispensers) or fully automatic production (by connecting an optional PLC + dispensers/flow meters to generate color formulas via PC). Packaging & Filling Unit: DIAMAC mod. DPC30 semi-automatic liquid filling machine: Designed for packaging finished products into containers (buckets, cans, etc.) Can be permanently connected to the main 50 HP stationary dissolvers ADDITIONAL INFORMATION: Option to purchase additional auxiliary equipment. Equipment is ready for inspection and transport. Please feel free to contact me for further details, pricing, or to arrange an inspection.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW Hfedpfx Afszp H R Ejtsl System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005, Sollich Turbotemper® TE 1600 D, manufactured in 2021, is a chocolate, fat mass, and spread tempering machine. Tempering capacity ≥1,350 kg/h, actual max. consumption in previous operation approx. 1,200 kg/h. Operating process in three stages: Stage 1 – Heating stage to recrystallize the mass to approx. 45 °C, with a separate hot water circulation circuit, mass temperature-dependent control, and a water circulation pump with electric heating. The circuit also has a cooling function, so mass inlet temperatures above 45 °C can be compensated. Stage 2 – Cooling and crystallization zone, guaranteeing a constant crystal quantity regardless of the mass flow rate. Large cooling surfaces and precise temperature control; specially shaped shearing and mixing tools create a high shear gradient and accelerate the formation of microcrystalline, stable beta crystals. Stage 3 – Mixing zone for homogeneous distribution of the beta seed crystals. The mixing stage can also be operated as a cooling stage for lower starting temperatures or higher throughput at the same starting temperature. Equipment and features: Hfjdpjzzvgtefx Aftsl • First-in/First-out principle, dwell time of all mass particles is the same • Siemens PLC with TP 900 (9") touch panel, parameters for up to 40 masses can be stored as retrievable programs • Reinforced drive with measurement of the power consumption, including visualization in the HMI. • Turbulent water flow, separate circulation pump for each stage, automatic power control • Two additional water control circuits in the frame: for heating the mass line to the mixing unit and the mass return line to the tank, as well as the line between the tank and the tempering machine, including operation via HMI. • Thermal start-up protection to prevent the machine from starting if it has not heated up sufficiently • Digital display of the mass inlet temperature, separate PT-100 sensor for the feed line • Safety pressure switch with digital pressure display, shuts off the feed pump in case of overpressure • Preset programs "Tempering" and "Night" with automatic adjustment of all heating and cooling circuits. Included in the scope of delivery: Feed pump type SPN 1500 (2"), machine no. 35120010, frequency-controlled via the tempering machine's control. Bypass pump type SPN 1000 (2"), machine no. 35120015, frequency-controlled, operated via HMI. Connection: Cooling water 5–10 °C, customer-side, 2–4 bar, minimum differential pressure supply/return 1 bar; 400 V, 3 Ph, 50 Hz + neutral + earth. Dimensions according to manufacturer's drawing A 17555-2, available. Condition, history and handling: Manufactured in 2021, delivery and commissioning by Sollich in week 40/2021, approx. 180 operating hours. Used exclusively for palm oil-free spreads, stored dry in Wuppertal since the end of 2024, inspection by arrangement. Documentation, operating manual and conformity documents are available. Purchase value in 2021 according to order confirmation: €121,320 for the unit including the specified pumps and water control circuits. Sale from commercial to commercial, excluding any warranty, technical specifications according to manufacturer's documentation, subject to change. This tempering machine is also available as part of a complete tempering and mixing system (including nut mixing unit NM 200 VA and cooling unit), see advertisement ID A22725782.

Condition: used, Slitting line 1500x 8, made by GUIDA Hfjdpfx Aoymciaoftsl Line composition: - Loading coil car - Uncoiler with sliding base and single expanding mandrel - Pressure arm - Feeding telescopic table with cutting edge and deflecting roll - Entry pinch roll - Crop shear - Tilting table - Mechanical centering device - Calming rolls - Slitting shear - Looping pit equipment (entry and exit saddles + connecting tables) - Felt press - Deflecting rolls - Titling table - Recoiler with single expanding mandrel - Separator arm - Electric equipment - Hydraulic equipment - Safety fences protection - Several tooling and accessories - Spare parts Material to be processed: Hot rolled carbon steel Material tensile strength: 400 N/mm² Coil width max.: 1.500 mm Thickness: 1 - 8 mm Coil weight: 20 Tn Coil inside diameter entry: 500/600 601 + steel spacers for bigger diameter Coil external diameter Entry/Exit: 1.700 mm Slitting shear mandrels diam.: 220 mm Blades diameter: 355 mm Line speed: 50/25 m/min with manual speed change gear Working Direction: From left to right Power supply tension: 380/50 Hz

Condition: ready for operation (used), Year of construction: 2015, A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible under power connection. Hedpfxox Dm D Is Aftofl

Year of construction: 2004, condition: used, Serial number: T5845513506 Capacity 6800 l/h Inlet pressure 3-10 bar Weight approximately 1365 kg LxWxH 1300x1350x1300 Hfsdpfx Afez Au Sqetsl Note! Outgoing pipework not included Online auction due to the full stop closure of Swedish dairy plant Emåmejeriet, manufacturer of butter cream and milk products (e.g. ALFA-LAVAL separators, RANNIE, TETRA PAK homogenizers, TETRA REX filling lines, MULTIVAC R5200 vacuum packing ELOPAK, many s/s storage tanks WEDHOLMS, logistics, carts, racks, many spare parts etc.) at Hultsfred in Sweden. The online auction opens Monday 14 September and closes Thursday 22 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 20 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 2010, functionality: fully functional, milling height: 180 mm, WEINIG NKT Dovetail Grooving Line – Double Unit DP20 Hjdpsznum Ssfx Aftofl An industrial dovetail grooving and gluing machine – developed for maximum precision and efficiency. Technical specifications: Wood input length: min. 130 mm | max. 1000 mm Wood output length: min. 3700 mm | max. 7400 mm (half lengths possible!) Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Dovetail design: Vertical / Horizontal, 10/11 dovetails, 3.8 mm pitch Glue application: 2-sided, PVAC white glue Connection power: 80 kW Note: The machine is currently disassembled and is in our warehouse. An inspection is possible by appointment. Scope of supply: WEINIG NKT Double Unit DP20 including control unit Integrated gluing station for 2-sided application Operating manual & documentation Hydromat 17B (7 spindles) General information Manufacturer: Weinig AG Model: Hydromat 17B // 7 spindles (various tools) Type: High-performance profiling milling machine / planing and rabbeting machine Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom table, fixed Description Heavy-duty, high-performance planing and rabbeting machine made of vibration-damping and torsion-resistant cast iron components in a modular system. Designed for precise and economical woodworking with high continuous output. Mechanical feed, adjustable in the range of 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table 2 m long, quick adjustment available. Chip removal for surfacing and jointing spindles, adjustment range 10 mm each. Technical data • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Adjustment range of chip removal: 10 mm (surfacing and jointing side) • Machine design: Without counter bearing, in high-performance design

Year of construction: 2015, condition: excellent (used), Complete line for producing sugar syrup. Batch cooker with steam connection Including a storage tank Additional storage tank Terlet - Mondotherm scraped heat exchanger Hodezpg Rxspfx Aftofl DTE cooler for cooling Mondotherm - Terlet Additional premixer for Fatcream

Condition: excellent (used), Vötsch VTS 7027-10 Temperature Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VTS 7027-10 Machine Type: Temperature Testing Chamber / Climatic Testing Chamber Test Chamber Volume: approx. 270 liters For sale is a used Vötsch VTS 7027-10 temperature testing chamber with programmable touch panel control. The system is suitable for professional temperature testing, environmental simulation, material testing, electronics and component testing, quality assurance, as well as development, aging, and stress tests. Technical Data: Temperature Range: -70 °C to +180 °C Hodpfx Aoz A A Eceftsfl Temperature Change Rate (Heating): approx. 10 K/min Temperature Change Rate (Cooling): approx. 14.5 K/min Temperature Deviation (Time): ±0.3 to ±0.8 K Temperature Deviation (Spatial): ±0.5 to ±2 K Test Chamber Volume: approx. 270 liters Refrigerant: R404A / R23 Refrigerant Quantity: 8 kg / 2.1 kg Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 14 kW Rated Current: 26 A Cooling: Water-cooled design Cooling water supply and return lines available Dimensions: Internal Dimensions (W × D × H): approx. 580 × 620 × 750 mm External Dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Equipment: Programmable touch panel control S!MCON/32-NET control, monitoring, and regulation system Interior made of stainless steel Large viewing window Test chamber lighting Side openings for test specimens Stainless steel shelves Adjustable temperature limiter Software temperature limiter RS232 interface Water-cooled refrigeration unit Transportation Data: Dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Weight according to model documentation, without options: approx. 835 kg Transportation by forklift or similar lifting vehicle Condition: Used Optical condition according to the images. Scope of Supply: Vötsch VTS 7027-10 temperature testing chamber Touch panel control Stainless steel inserts as shown in the images Accessories as shown in the images Availability: upon agreement. Scope of supply as shown in the images. Subject to changes, errors and prior sale.

Year of construction: 2026, condition: new, functionality: fully functional, log sorting line with 10 pockets, 5 on each side. processes logs with diameters of 5-200 mm and lengths of 1.5-4.2 m. consists of: 1. accumulation conveyor, 12 m long. 2. separator. 3. receiving conveyor, 6 m long. 4. scanner conveyor, 9 m long. 5. 10 sorting pockets. total length: 28 m. Hjdpfx Aozn Awfjftsfl the cost of electrical connection with Siemens components is not included in the equipment price; estimated at 30,000 EUR.

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Hedpfozwu Diox Aftefl Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. Hfodpezuuimsfx Aftsl The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Hfedpfx Aozzvf Aoftol Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Hfodpfxezxxmks Aftsl Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Double-sided component painting line fully automatic Working width of the line 1300 mm The line consists of the following devices: Hfodpfxjtut Dxe Aftjl - Vacuum feeder - automatic feeder before painting - GIARDINA Dualtech 416 automatic paint machine - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - material turntable - automatic painting machine RICHFRUITS - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - Vacuum feeder Machine in working order, connected in very good condition.