Used Cormak Roller Support Stand for sale (27,183)

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data Bledpfx Abjudi Unetol TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: new, Year of construction: 2026, CORMAK PS-650 welding positioner is a professional device designed for precise rotation and positioning of welded components in various industrial processes. Thanks to its high load capacity, robust construction, and smooth adjustment of operating parameters, this positioner is an indispensable support tool in facilities involved in welding, assembly, and painting of metal structures. Main advantages of the machine Load capacity of up to 650 kg in horizontal position and 300 kg in vertical position allows handling heavy structural components. Smooth rotation speed adjustment from 0.2 to 1.8 rpm enables precise adaptation to specific welding processes. Table tilting range from 0° to 90° allows welding in the most optimal working position. Compact and stable construction with a robust body ensures safe operation even under high loads. Possibility of mounting a self-centering three-jaw chuck significantly facilitates the clamping of cylindrical components. Design and technology The CORMAK PS-650 welding positioner has been designed with a focus on durability and reliability. The construction includes a brass grounding sleeve, which allows the welding current connection to be transferred directly to the workpiece, ensuring maximum process efficiency. The drive system equipped with a 1.5 kW motor enables smooth and stable rotation of heavy components. The device is equipped with a foot control pedal and a wired hand controller, improving operator comfort and control. Precision and work efficiency The ability to set the table inclination at any angle within a range of up to 90°, combined with precise rotation speed adjustment, allows perfect positioning of the workpiece for a specific task. Rotation in both directions significantly speeds up the welding process and improves the quality of joints, ensuring repeatability and an aesthetic finish of welds. Applications The CORMAK PS-650 welding positioner is widely used in: steel construction plants, production and repair workshops, industries such as mechanical engineering, railway, and shipbuilding, painting facilities and assembly departments. Bljdpeuc Tdqjfx Abtsl Thanks to the ability to rotate and position components at the most convenient angle, it greatly improves operator efficiency and reduces production times. Standard equipment CORMAK PS-650 welding positioner Foot control pedal Wired hand controller Power cable Operating manual Optional equipment Self-centering three-jaw chuck for pipes WP500 Self-centering three-jaw chuck for pipes WP600 Technical specifications Parameter Value Horizontal load capacity 650 kg Vertical load capacity 300 kg Table diameter 650 mm Centering hole size 80 mm Table tilting range 0° ~ +90° Rotation speed range 0.2–1.8 rpm Speed adjustment Smooth Overall length 850 mm Overall width 700 mm Overall height 680 mm Gross weight 230 kg Power 1.5 kW Power supply 400 V CORMAK welding positioners are proven and reliable solutions for professional industrial facilities. Increase precision, reduce production time, and improve welding quality with the PS-650 model.

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 700 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 700 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 700 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 700 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 700 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 690 l/min ✅ Motor power: 5.5 kW Technical Specifications Bjdpjrh E Erofx Abtoll Parameter Specification Motor power 5.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 690 l/min Output at 6 bar 650 l/min Output at 8 bar 650 l/min Output at 10 bar 630 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 370 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK UWS3 Tool Grinder The CORMAK UWS3 is a compact yet highly functional tool grinder designed for sharpening a wide range of cutting tools. Thanks to precise guidance and versatile head adjustment, the machine is perfectly suited as a drill sharpener, milling cutter grinder, and for the regeneration of lathe tools, electrodes, and centre points. Its stable construction, high-quality spindle, and comprehensive set of holders make it an ideal solution for tool rooms and technical service workshops. Main advantages of the machine Wide range of applications: Sharpening of twist drills, lathe tools, end mills, centre points, and electrodes. Precise adjustment: The grinding head can be positioned in 24 settings, with a cone angle range up to 180°, relief angle adjustment up to 44°, and negative angle adjustment up to 52°. Solid construction: The heavy cast-iron body provides excellent stability and eliminates vibrations during operation. High-precision grinding spindle: Vibration-free operation ensures excellent surface quality and accuracy of sharpened tools. Built-in LED lighting: Improves visibility of the working area when handling precision tools. Corundum and diamond grinding wheels included: Allows sharpening of both steel tools and carbide tools. Design and technology The CORMAK UWS3 tool grinder was designed for long-term and intensive use. Its compact yet rigid construction ensures high precision in every working position. The integrated grinding head can be tilted and rotated in multiple planes, allowing the operator to achieve the required rake, clearance, and conical angles during tool sharpening. The micro-adjustment system of the tool holder and spindle enables extremely accurate positioning of the tool in relation to the grinding wheel, ensuring repeatable and precise results. Precision and efficiency Thanks to the use of high-quality components and vibration-free operation, the CORMAK UWS3 drill and milling cutter grinder provides repeatable sharpening results and significantly extends the service life of cutting tools. The ability to install various types of holders and the wide adjustment range allow the machine to be adapted to specific machining tasks, including small production batches and regeneration of special-purpose tools. Applications The UWS3 model is ideal for: tool rooms and locksmith workshops, maintenance departments in industrial plants, small production facilities with in-house tool regeneration, technical schools and training workshops for learning tool sharpening techniques. Standard equipment Corundum cup grinding wheel Diamond cup grinding wheel Grinding wheel flange Collets: 4, 6, 8, 10, 12 mm Drill holder Milling cutter holder Lathe tool holder LED lighting Bedpfxjv E Ek Hj Abtsll Technical specifications Parameter Value Grinding wheel diameter 100 mm Grinding wheel thickness 50 mm Grinding wheel bore diameter 20 mm Spindle speed 5200 rpm Maximum/minimum collet diameter 3–16 mm Cone angle 0°–180° Negative angle 0°–52° Relief angle 0°–44° Longitudinal holder movement 140 mm Holder micro-adjustment 18 mm Spindle micro-adjustment 6 mm Motor power 0.25 kW / 230 V Weight 45 kg Dimensions 450 × 350 × 340 mm

Condition: new, Year of construction: 2026, CORMAK MS2000 Pipe and Profile Belt Grinder is a modern metal belt grinding machine designed for precise and efficient grinding of steel pipes, closed profiles, and flat surfaces. The machine is ideal wherever high processing speed, excellent surface finish, and operator comfort are essential. Thanks to its robust construction, powerful motor, and dust extraction system, the CORMAK MS2000 metal belt grinder is ready for intensive industrial operation. Main advantages of the machine Prismatic clamping jaw system – ensures secure and stable fixing of pipes, profiles, and flat bars. Two-speed belt drive – allows adjustment of the grinding speed (15 or 30 m/s) depending on the material and the stage of processing. Stable machine base – minimizes vibrations, ensuring precision and comfortable operation. Large upper working surface – enables efficient removal of burrs and sharp edges from flat components. Easy access to wear components – quick belt and roller replacement minimizes downtime. Design and technology The stationary CORMAK MS2000 belt grinder has been designed for intensive industrial use. The robust steel construction provides a rigid foundation for all working mechanisms, ensuring exceptional durability and machining accuracy. A 3.3 kW motor drives a 100 mm wide and 2000 mm long abrasive belt. The integrated dust extraction system, including two dust collection containers, enables clean and safe operation for the user. Bjdevxhv Sepfx Abtell Precision and work efficiency Thanks to the adjustable grinding angle from 30° to 90°, the machine allows precise positioning of the workpiece relative to the belt, which is essential when grinding welds, joints, and edges. The standard grinding roller with a diameter of 42.4 mm provides versatile application possibilities – from precise processing of thin-walled pipes to grinding square profiles. Applications The CORMAK MS2000 belt grinder is suitable for: grinding steel, stainless steel, and acid-resistant steel pipes, grinding weld seams and edges of steel structures, finishing surfaces of closed profiles and flat bars, welding workshops, manufacturing plants, and metalworking facilities. Standard equipment Stable machine base Standard abrasive belt 100 × 2000 mm Grinding roller Ø42.4 mm Service tools Technical specifications Parameter Value Power supply 400 V Angle adjustment 30°–90° Belt speeds 15–30 m/s Motor power S6 3.3 kW Abrasive belt dimensions 100 × 2000 mm Machine dimensions 630 × 1430 × 1550 mm Weight 190 kg

Condition: new, Year of construction: 2026, CORMAK PT410 Planer Thicknesser – Professional Woodworking Machine The CORMAK PT410 planer thicknesser is a high-performance woodworking machine designed for professional applications in carpentry workshops, furniture factories, and industrial production facilities. The applied technical solutions ensure exceptional precision, stability, and operator comfort during both surface planing and thicknessing operations. The PT410 model offers an impressive 410 mm working width and a powerful 5.2 kW (S6) motor, meeting the requirements of the most demanding users. Main advantages of the machine Heavy-duty, robust construction – a 330 kg machine weight and cast iron working tables eliminate vibrations, ensuring stable operation even when processing large wooden elements. S6: 5.2 kW motor (S1: 4.0 kW) – high motor power enables smooth machining of hard wood species and intensive operation without the risk of overload. Working width up to 410 mm – ideal for processing wide panels, beams, countertops, and furniture boards. Quick change between operating modes – eccentric locking mechanisms allow switching from planer mode to thicknesser mode within seconds. Aluminium fence with angle scale – precise adjustment from 90° to 45° enables machining of angled and bevelled elements. Central thicknessing table lifting system – ensures uniform material guidance without tilting or uneven thickness. Construction and technology Bsdsvxh T Depfx Abtell The CORMAK PT410 planer thicknesser is built on a heavy welded frame with precision-ground cast iron tables. The 1660 mm long planer tables provide excellent material support and accurate feeding. The cutter block rotates at 5500 rpm and is equipped with three precisely adjusted HSS knives measuring 410 × 25 × 3 mm, allowing smooth and high-quality surfaces after a single pass. The 120 mm dust extraction outlet ensures efficient chip removal, which is essential during continuous operation. Precision and working efficiency The PT410 allows machining materials with a height range of 5–225 mm and provides a maximum cutting depth of 3.5 mm in thicknessing mode. The 7 m/min feed speed enables fast and efficient processing of large quantities of wood. Thanks to the accurate height scale and ergonomically positioned adjustment wheel on the right side of the machine, the operator has full control over machining parameters. Standard equipment Three HSS knives, dimensions: 410 × 25 × 3 mm Cast iron planer tables (1660 × 410 mm) Cutter head guard Feed stop switch and emergency STOP switch Ø120 mm dust extraction outlet Polish-language operating manual (DTR) CE Declaration of Conformity Technical specifications Parameter Specification Cutter block diameter 75 mm Cutter block speed 5500 rpm Dust extraction outlet diameter 120 mm Tilting angle of fence 90°–45° Number of knives / dimensions 3 / 410 × 25 × 3 mm Maximum planing width 410 mm Maximum thicknessing width 408 mm Maximum thicknessing height 5–225 mm Maximum thicknessing cutting depth 3.5 mm Maximum planing cutting depth 4 mm Thicknessing feed speed 7 m/min Planer table dimensions 1660 × 410 mm Thicknessing table dimensions 600 × 408 mm Gross weight 330 kg Machine dimensions (L/W/H) 1640 / 920 / 1000 mm Motor speed 2800 rpm Motor power S1/S6 S1: 4.0 kW / S6: 5.2 kW Power supply 3-phase, 400 V Operating manual (DTR) Yes CE Declaration Yes

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DG13M is a compact and precise spiral drill sharpener designed for sharpening tools made of high-speed steel (HSS) and cobalt alloys. The machine combines high sharpening accuracy with simple operation, delivering professional results without the need for specialized operator skills. It is ideal for use in workshops, tool rooms, and maintenance departments. Main advantages of the machine Precise sharpening of spiral drills with diameters ranging from ø2 to ø13 mm. Adjustable point angle from 90° to 135° – compatible with most industrial standards. CBN (borazon) grinding wheel included – ensures accurate sharpening of HSS steel drills. Easy operation – the grinding process requires no previous operator training. Compact dimensions and low weight – a mobile device that is easy to move and install at any workstation. Complete ER20 collet set and holder included – ready for operation immediately after setup. Design and technology The CORMAK DG13M is equipped with a precise 120 W motor operating at 4800 rpm, providing optimal conditions for sharpening high-speed steel and cobalt drills. Thanks to the use of a CBN (borazon) grinding wheel, the sharpener ensures high durability and repeatability of the sharpening process. The solid cast iron housing eliminates vibrations, resulting in stable operation and uniform sharpening of cutting edges. Precision and work efficiency Bedpfsvu Aaksx Abtoll The CORMAK DG13M drill sharpener enables fast and repeatable sharpening of cutting tools, significantly extending their service life and reducing operating costs. The adjustable sharpening angle and dedicated collets ensure precise tool guidance, eliminating errors caused by manual positioning. Applications The machine is suitable for: mechanical workshops, tool rooms and production plants, maintenance departments, small and medium-sized enterprises requiring quick tool regeneration. Standard equipment CBN grinding wheel – 1 pc. (for HSS steel) 11 × ER20 collets: ø3 – ø13 mm Clamping holder – 1 pc. Technical specifications Parameter Value Drill diameter range ø2 – 13 mm Point angle 90° – 135° Power supply 120 W / 230 V Motor speed 4800 rpm Weight approx. 9 kg Dimensions 330 × 170 × 160 mm

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK DG13MD is a high-quality spiral drill sharpener designed for professional sharpening of tools made from high-speed steel (HSS) and cobalt alloys. Its key advantage is the combination of precise sharpening performance with a compact design and exceptionally simple operation. Thanks to the use of a CBN grinding wheel and a complete set of ER collets, the machine enables fast and accurate drill sharpening without the need for specialized operator skills. It is an optimal solution for workshops, tool rooms, and industrial plants. Main advantages of the machine Sharpening of spiral drills from ø2 to ø13 mm with the ability to set the point angle from 90° to 135°. High-quality CBN (borazon) grinding wheel included – ideal for sharpening high-speed steel (HSS) drills. Additional port for split-point grinding – improves cutting efficiency and reduces cutting forces. Blsdpfx Aovu Ub Hobtel Simple and intuitive operation – no need for prior operator training. Compact dimensions and low weight of 9 kg – easy mobility and convenient placement at the workstation. Complete set of collets and holders included – ready for operation immediately after setup. Consistent sharpening repeatability – essential for serial production and precision machining. Design and technology The CORMAK DG13MD is based on a robust and stable construction designed to reduce vibrations and ensure operator safety. The high-performance 120 W motor, operating at 4800 rpm, provides ideal working conditions even during continuous operation. The precise drill clamping system using ER collets and guided positioning in the clamping holder enables highly accurate sharpening, resulting in significantly extended tool life. The additional split-point grinding port allows correction of the drill geometry to reduce cutting resistance and improve drilling performance, especially when working with harder materials. Precision and work efficiency The CORMAK DG13MD drill sharpener has been designed to provide maximum accuracy in a short time. Thanks to the high-quality CBN grinding wheel, the machine produces a uniform cutting edge with optimal geometry, improving drilling performance, reducing cutting resistance, and minimizing the risk of drill breakage. The precise tool guidance eliminates errors caused by incorrect manual positioning, ensuring consistent sharpening results every time. Applications The DG13MD model is ideal for: tool rooms involved in the regeneration and preparation of cutting tools, maintenance departments in industrial plants, small and medium-sized production facilities where quick response and reduced operating costs are important, technical workshops and vocational schools. Standard equipment CBN grinding wheel – 1 pc. (for high-speed steel tools) 11 × ER20 collets: ø3 – ø13 mm 1 clamping holder with guide Technical specifications Parameter Value Drill diameter range ø2 – 13 mm Point angle 90° – 135° Power supply 120 W / 230 V Motor speed 4800 rpm Weight approx. 9 kg Dimensions 330 × 170 × 160 mm

Condition: new, Year of construction: 2026, The CORMAK SM150 belt grinder is an industrial metal belt sanding machine designed for intensive removal of excess material from large surfaces, edges, and weld seams. Equipped with a wide 150 mm abrasive belt and a two-speed belt drive system, the machine provides high working efficiency in metalworking shops, tool rooms, and maintenance departments. Its stable construction, powerful motor, and advanced ergonomics make it a reliable solution for precise and safe metal processing. Main advantages of the machine Wide abrasive belt 2000 × 150 mm – ideal for processing large workpieces and flat surfaces requiring uniform finishing. Two belt speeds: 15 / 30 m/s – allows adjustment of grinding speed according to the material and type of operation. Powerful 2.8 kW motor – maintains constant speed even under heavy pressure, ensuring high machining quality. Spring-loaded belt tensioning system – automatically maintains proper belt tension, eliminating the need for manual adjustment. Stable construction with a wide base – effectively reduces vibrations during operation, improving operator comfort and machining accuracy. Easy grinding angle adjustment – enables quick and convenient positioning of the belt in relation to the workpiece. Two dust extraction ports – provide efficient dust removal, improving workplace safety and cleanliness. Design and technology The CORMAK SM150 metal belt grinder has been built using reinforced high-rigidity steel components, ensuring stability and long-term reliability. The integrated dust extraction system and working area guards improve safety during operation. The adjustable grinding table and large belt contact surface (200 × 150 mm) allow convenient processing of workpieces with various shapes and dimensions. Precision and working efficiency Thanks to its wide abrasive belt and high-power drive system, the CORMAK SM150 stationary belt grinder enables fast and precise surface preparation for further production stages, including painting, galvanizing, or welding. The two-speed operating mode provides full control over both rough grinding and finishing processes. Applications The machine is ideally suited for: grinding edges, weld seams, and large flat surfaces, processing structural steel, stainless steel, and aluminum, Blsdpfovu Uh Tex Abtol industrial workshops, service facilities, and metalworking shops, serial and individual production, preparing surfaces for protective coatings. Standard equipment Abrasive belt 2000 × 150 mm Eye protection guard Adjustable grinding table Dust extraction ports (2 pcs.) Graphite coating reducing friction Motor safety switch Belt tensioning roller Vibration-damping base Technical specifications Parameter Value Abrasive belt dimensions (L × W) 2000 × 150 mm Contact wheel surface (W × W) 200 × 150 mm Grinding area 150 × 575 mm Belt speed 15 / 30 m/s Motor power 2.8 kW / 400 V Machine dimensions (L × W × H) 1100 × 650 × 980 mm Weight 98 kg Warranty 12 months

Condition: new, Year of construction: 2026, The CORMAK PSM150 belt grinder is an advanced metal belt sanding machine designed for efficient and precise grinding of large flat surfaces as well as hard-to-reach welds close to the floor. Its construction has been optimized for ergonomics, stability, and ease of operation, making it an indispensable solution for professional industrial plants, metalworking workshops, and welding facilities. Main advantages of the machine High grinding efficiency – ideal for processing sheet metal, weld seams, and surfaces near the floor. Metal belt grinder with a large contact wheel 195 × 150 mm – provides a large contact area and stable operation. Adjustable depth stop – enables precise adjustment of grinding parameters to suit the workpiece. Large working surface 150 × 450 mm – effective finishing of large and flat components. Two belt speeds – 15 and 30 m/s – allows selection of the appropriate working speed depending on the application. Low machine weight (85 kg) – ensures mobility and easy transport within the facility. Bodpfx Aevu Unmjbtell Design and technology The CORMAK PSM150 is a stationary belt grinder designed for sanding large and heavy components that cannot be processed on standard work tables due to their size. Its ergonomic design allows the operator to maneuver the machine directly over the workpiece. The drive roller and the 150 mm wide contact wheel enable efficient work on wide weld seams and surfaces. The adjustable working height range of 475–1240 mm allows the machine to be adapted to individual working conditions. Precision and working efficiency A 2.8 kW motor and a two-speed drive system ensure high grinding performance while maintaining precision. The CORMAK PSM150 metal belt grinder is suitable for processing components made of carbon steel, stainless steel, and aluminum. The stable construction minimizes vibrations, while the belt guidance system ensures accurate tracking along the entire working length. Applications The PSM150 model is an ideal solution for: welding shops and steel construction plants, manufacturers of railings, handrails, and large sheet metal components, companies involved in renovation and grinding of metal surfaces, maintenance and repair departments, stainless steel and aluminum processing facilities. Standard equipment Abrasive belt 2000 × 150 mm Contact wheel 195 × 150 mm Drive roller 195 × 150 mm Adjustable depth stop Stable construction with working height adjustment system Optional equipment Spare abrasive belts with different grit sizes Technical specifications Parameter Value Motor power 2.8 kW Contact wheel 195 × 150 mm Drive roller 195 × 150 mm Flat grinding area 150 × 450 mm Belt dimensions 2000 × 150 mm Belt speed 15 / 30 m/s Working height 475–1240 mm Weight 85 kg Package dimensions 750 × 1100 × 800 mm Power supply 400 V

Condition: new, Year of construction: 2026, The professional cast-iron belt–disc sander CORMAK BDS6x10 is a versatile workshop machine that ensures precise and stable machining of wood and plastics thanks to the combination of belt sanding and disc sanding functions. Main Advantages Two functions in one – a belt sander and a disc sander with the possibility of operating the belt both vertically and horizontally, maximizing application flexibility. Higher efficiency – the 750 W (S1) motor provides increased torque and constant rotational speed (2980 rpm). Enlarged working surfaces – a larger sanding disc (254 mm) and a wider belt (1219 × 150 mm) for more efficient processing of large workpieces. Precise angle machining – an adjustable work table (332 × 170 mm) with a miter gauge enables accurate sanding at a 45° angle. Stability and durability – the base made of grey cast iron suppresses vibrations, ensuring maximum precision and long machine life. Efficient dust extraction – a 50 mm extraction port allows effective connection to an external dust collection system. Construction and Operating Parameters The BDS 6x10 belt–disc sander is built on an exceptionally rigid and stable grey cast-iron base, which minimizes vibrations generated during intensive operation. The 332 × 170 mm work table is designed for stable guidance of the workpiece and includes… Technical Specifications Motor power: 750 W Voltage: 230 V / 50 Hz Rotational speed: 2980 rpm Bedpfx Aexy Hrqobtell Cable length: 1.8 m Table dimensions: 332 × 170 mm Dust extraction port: 50 mm Belt dimensions: 1219 × 150 mm Belt speed: 8 m/s Sanding disc diameter: 254 mm Sound power level: 93.3 dB(A) Sound pressure level: 80.3 dB(A) Gross weight: 41 kg Package dimensions: 495 × 760 × 470 mm

Condition: new, Year of construction: 2026, CORMAK RGE30PW Electric Tapping Machine The CORMAK RGE30PW electric tapping machine is an innovative industrial tool that revolutionizes the process of thread cutting in various materials. Using the latest technologies, the RGE30PW enables fast, precise, and efficient tapping in both large production facilities and small workshops. Thanks to the servo drive and modern control system, this machine significantly accelerates the entire tapping process while ensuring exceptional reliability and high-quality threads, making it an essential tool in any production environment. Main advantages of the CORMAK RGE30PW Electric Tapping Machine High efficiency: Equipped with a powerful servo drive, the CORMAK RGE30PW provides fast and accurate tapping, significantly reducing operation time compared with traditional manual methods. Precise thread cutting: The rotating arm and easy adjustment of tapping parameters such as spindle speed, tapping direction, and thread depth guarantee excellent thread quality while maintaining a precise 90° working angle. Wide range of applications: The tapping machine can process various materials, including steel, stainless steel, aluminium, and non-ferrous metals, making it suitable for many industrial sectors. Intuitive control panel: The machine features a modern touchscreen control panel that allows easy programming of operating parameters, with menu languages available in Polish and English. Rotating tapping arm: This function enables easy and precise thread cutting at any angle, significantly increasing flexibility in various applications. Cooling and chip removal system: The integrated micro-spray lubrication system cools the tools, extending their service life, while the chip blow-off system effectively removes chips and improves visibility of the workpiece. Design and Technology Bljdjycdalepfx Abtel The CORMAK RGE30PW electric tapping machine was designed with a focus on efficiency, precision, and durability. It is a robust device providing long-term, trouble-free operation even under intensive working conditions. Key components, including the tapping arm, have been engineered to ensure exceptional stability and accuracy during tapping operations. Standard Equipment of the CORMAK RGE30PW Tapping Machine Touchscreen control panel: Allows easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Rotating tapping arm: Enables thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long service life. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE30PW Tapping Machine Parameter Value Power 1.2 kW Power supply 230 V Weight 50 kg Maximum arm reach 1200 mm Maximum spindle speed 200 rpm Included in the set: Tap holders covering the range from M5 to M30. The machine is supplied without a workbench, vice, and taps.

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. Blsdpoychbasfx Abtjl They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, The CORMAK MSM250 multifunctional belt and disc grinder is a modern and efficient combination grinding machine designed for industrial, workshop, and woodworking applications. By combining two functions – belt and disc grinding – the machine provides maximum flexibility and efficiency when processing metal, wood, and plastics. Equipped with high-quality NSK bearings, this grinder operates extremely quietly, smoothly, and reliably for a long service life. This distinguishes it from competing products and ensures professional performance. The belt grinder with a base features a balanced rotor supported by ball bearings and a powerful motor with copper windings, providing high torque – essential for intensive grinding operations. The integrated Ø38 mm dust extraction connection allows easy connection to an extraction system, improving working comfort and safety. Additionally, the CORMAK MSM250 disc grinder with a base is equipped with an adjustable work rest and IP54 protection, ensuring precision and operator safety. If you are looking for a reliable bench grinder with universal applications, the MSM250 model will meet the expectations of even the most demanding users. Main features of the machine: Combination belt and disc grinder – maximum functionality Industrial NSK bearings – quiet operation and high durability Suitable for grinding metal, wood, and plastics – versatile applications Motor with copper windings – reliability and efficiency Ø38 mm extraction connection – clean and safe working environment Stable base – improved comfort and ergonomic operation Technical specifications Parameter Value Grinding disc size 250 × 32 mm Grinding disc bore 32 mm Disc grit K40 Grinding belt size 1020 × 75 mm Belt grit P80 Speed 2960 rpm Motor power S1 0.9 kW Motor power S6 1.5 kW Voltage 400 V Dimensions 570 × 310 × 1410 mm Weight 32.5 kg Bljdjxfgw Rspfx Abtel S1 – motor power during continuous operation under full load. S6 – motor power during intermittent operation with idle periods accounting for up to 40% of the duty cycle.

Condition: new, Year of construction: 2026, CORMAK BMS250 Brush and Disc Multifunctional Sander – A Modern and Efficient Solution for Industrial Use The CORMAK BMS250 multifunctional brush and disc sander is a modern and high-performance combination machine designed for industrial, workshop, and woodworking applications. By integrating both brushing and disc sanding functions, this unit ensures maximum flexibility and efficiency when working with metal, wood, and plastics. Fitted with high-quality NSK bearings, the machine operates exceptionally quietly, smoothly, and reliably over extended periods. This feature sets it apart from competitors and guarantees professional performance. The brush sander with a stable stand features a balanced rotor mounted on ball bearings and a powerful motor with copper windings, providing high torque – essential for intensive sanding tasks. An integrated 60 mm dust extraction port allows for easy connection to an extraction system, improving both work comfort and operator safety. Additionally, the CORMAK BMS250 disc sander comes with an adjustable work rest and an IP54-rated enclosure, ensuring precise operation and protection for the user. If you're looking for a dependable bench sander with versatile capabilities, the BMS250 model will meet the demands of even the most discerning professionals. Key Features: Combined brush and disc sander – maximum versatility Industrial-grade NSK bearings – quiet operation and long lifespan Suitable for sanding metal, wood, and plastics – wide range of applications Copper-wound motor – durability and high performance 60 mm dust extraction port – clean and safe workspace Stable base – ergonomic and comfortable operation Technical Specifications: Specification Value Disc size 250 x 32 mm Disc bore diameter 32 mm Disc grit K 36 Rotational speed 2960 rpm Motor power (S1 continuous duty) 0.9 kW Motor power (S6 intermittent) 1.5 kW Dust extraction port diameter 60 mm Voltage 400 V Dimensions 600 x 400 x 1130 mm Weight 24 kg Blodjxfgz Njpfx Abtol S1 – Motor power for continuous operation under full load S6 – Motor power for intermittent operation with idle periods of up to 40%

Condition: new, Year of construction: 2026, CORMAK MM2315Q 400V Wood Edge Sander The CORMAK MM2315Q 400V is a compact yet highly versatile edge sander designed for intensive, multi-purpose use in woodworking shops and manufacturing facilities. Featuring a robust construction, the ability to sand both straight and curved workpieces, and operation in both vertical and horizontal positions, the MM2315Q is a reliable solution for professional wood processing applications. Key Features Versatile operation – suitable for sanding both straight edges and curved workpieces thanks to the additional auxiliary table. Quick belt replacement – the lever-operated system allows fast, tool-free sanding belt changes, significantly reducing machine downtime. Flexible applications – the adjustable sanding unit can be positioned for both horizontal and vertical operation, expanding the range of machining possibilities. Precision and control – both the main worktable and the auxiliary contour sanding table feature height adjustment, allowing precise setup according to the workpiece dimensions. Stable and durable construction – the rigid steel frame minimizes vibration, ensuring consistent sanding pressure and repeatable results. Compact footprint – despite its wide range of capabilities, the machine occupies minimal floor space, making it ideal for workshops with limited working areas. Construction and Technology The CORMAK MM2315Q edge sander is built on a heavy-duty steel frame, providing exceptional rigidity and resistance to deformation under load. The 1.1 kW three-phase 400 V motor delivers stable belt speed of 840 m/min, ensuring efficient and consistent material removal. The sanding unit features an adjustable sanding angle from 0° to 45°, enabling precise edge and end-grain sanding at various angles, making it ideal for finishing operations and machining irregularly shaped components. The precision belt tensioning system maintains optimal belt tension, extending abrasive belt life while ensuring smooth and stable operation. Precision and Performance The large 790 × 221 mm worktable and a maximum sanding length of 790 mm allow accurate machining of large workpieces. The height-adjustable worktable and the additional 514 × 221 mm auxiliary contour sanding table provide excellent support and precise guidance, even when working with complex shapes. Standard Equipment Auxiliary table for sanding curved workpieces Quick sanding belt replacement mechanism Precision belt tensioning system Bodpovuggzefx Abtsll Adjustable sanding unit for horizontal and vertical operation Integrated Ø100 mm dust extraction port for connection to a dust collection system Operating manual (Polish) CE Declaration of Conformity Technical Specifications Specification Value Sanding belt size 2010 × 152 mm Worktable size 790 × 221 mm Table height 810 mm Stand height 600 mm Auxiliary contour sanding table size 514 × 221 mm Maximum sanding length 790 mm Dust extraction port diameter 100 mm Edge and end-grain sanding angle 0–45° Belt speed 840 m/min Motor power S1: 1.1 kW / S6: 1.5 kW Power supply 400 V Weight 90 kg Warranty 12 months Operating manual Yes CE Declaration Yes

Condition: new, Year of construction: 2025, CORMAK MB150 Jointer Planer The CORMAK MB150 jointer planer is a compact yet robust machine designed for precise surface flattening of wooden components. Its main purpose is to create perfectly flat surfaces on processed materials, preparing them for further machining operations. Thanks to its solid construction, precision-ground cast iron tables, and a three-knife cutter head, this woodworking planer provides a high level of accuracy and repeatability in both craft and semi-professional applications. Main advantages of the CORMAK MB150 machine Three-knife cutter head – ensures a smooth and precise surface finish after a single pass of the material. Cast iron working table – made of high-quality cast iron, providing stability, rigidity, and resistance to deformation. Safe and convenient operation – a safety switch mounted on an adjustable arm is easily accessible during operation. Adjustable cutter shaft guard – allows precise adjustment of the guard height, angle, and extension, increasing operator safety. Noise reduction system – integrated table silencers reduce the noise level during operation. Compact dimensions and stability – despite its small size, the machine’s 105 kg weight ensures rigidity and minimizes vibrations. Construction and technology The CORMAK MB150 planer is built around a cast iron body that provides excellent durability and resistance to deformation. Working components, including the Ø62 mm cutter shaft, are equipped with three replaceable knives measuring 170 x 15 x 3 mm. This design ensures high cutting accuracy and easy maintenance of the tools. The adjustable tilting fence allows the material to be positioned at an angle of up to 45°, providing a wider range of woodworking applications. Precision and working efficiency The machine is powered by a motor with a rating of S1 1.1 kW / S6 1.5 kW, reaching a cutter shaft speed of 4500 rpm. These operating parameters ensure smooth and efficient processing of softwood, hardwood, boards, beams, and wooden elements. The maximum working width of 152 mm and a planing depth of up to 13 mm make the MB150 an excellent solution for precise preparation work before further material processing. Applications The MB150 jointer planer is designed for: Bjdpfx Absvughrotsll Craftsmen and carpenters working daily with solid wood, Service and model-making workshops, Advanced home users looking for stability and precision, Preliminary processing of boards, strips, beams, and glued wooden components. Standard equipment Three-knife cutter head, Adjustable cutter shaft guard, Tilting fence with angle adjustment, High-quality cast iron tables, Manual planing depth adjustment knob, Integrated Ø100 mm dust extraction port, Power cable with plug. Technical specifications Parameter Specification Motor power S1 1.1 kW; S6 1.5 kW Power supply 230 V Motor speed 2850 rpm Maximum working width 152 mm Maximum planing depth 13 mm Cutter shaft speed 4500 rpm Number of knives 3 Knife dimensions 170 x 15 x 3 mm Cutter shaft diameter Ø62 mm Tilting fence angle range 0°–45° Working table dimensions 1210 x 185 mm Dust extraction port diameter Ø100 mm Weight 105 kg Dimensions 1195 x 530 x 1150 mm

Condition: new, Year of construction: 2026, CORMAK RGE30PW Electric Tapping Machine The CORMAK RGE30PW electric tapping machine is an innovative industrial tool that revolutionizes the process of thread cutting in various materials. Using the latest technologies, the RGE30PW enables fast, precise, and efficient tapping in both large production facilities and small workshops. Thanks to the servo drive and modern control system, this machine significantly accelerates the entire tapping process while ensuring exceptional reliability and high-quality threads, making it an essential tool in any production environment. Main advantages of the CORMAK RGE30PW Electric Tapping Machine Bledpfjvughxex Abtsl High efficiency: Equipped with a powerful servo drive, the CORMAK RGE30PW provides fast and accurate tapping, significantly reducing operation time compared with traditional manual methods. Precise thread cutting: The rotating arm and easy adjustment of tapping parameters such as spindle speed, tapping direction, and thread depth guarantee excellent thread quality while maintaining a precise 90° working angle. Wide range of applications: The tapping machine can process various materials, including steel, stainless steel, aluminium, and non-ferrous metals, making it suitable for many industrial sectors. Intuitive control panel: The machine features a modern touchscreen control panel that allows easy programming of operating parameters, with menu languages available in Polish and English. Rotating tapping arm: This function enables easy and precise thread cutting at any angle, significantly increasing flexibility in various applications. Cooling and chip removal system: The integrated micro-spray lubrication system cools the tools, extending their service life, while the chip blow-off system effectively removes chips and improves visibility of the workpiece. Design and Technology The CORMAK RGE30PW electric tapping machine was designed with a focus on efficiency, precision, and durability. It is a robust device providing long-term, trouble-free operation even under intensive working conditions. Key components, including the tapping arm, have been engineered to ensure exceptional stability and accuracy during tapping operations. Standard Equipment of the CORMAK RGE30PW Tapping Machine Touchscreen control panel: Allows easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Rotating tapping arm: Enables thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long service life. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE30PW Tapping Machine Parameter Value Power 1.2 kW Power supply 230 V Weight 50 kg Maximum arm reach 1200 mm Maximum spindle speed 200 rpm

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1700 Electric Tapping Machine The CORMAK RGE36PWx1700 electric tapping machine is an advanced thread-cutting device designed for both large production facilities and smaller workshops. This tapping machine significantly reduces thread machining time, increasing work efficiency and improving the precision of manufactured threads. It has been developed to provide high reliability, ease of operation, and versatility across a wide range of industrial applications. Main advantages of the CORMAK RGE36PWx1700 Electric Tapping Machine High precision and fast tapping: Thanks to the powerful servo drive and tapping arm, the machine ensures accurate thread cutting in a short time, which is essential for serial production. Easy operation: The machine is equipped with a touchscreen control panel available in Polish and English, allowing simple adjustment of tapping parameters such as spindle speed, tapping direction, and thread depth. High flexibility: The tapping arm enables thread cutting at various angles, while the rotating motor assembly allows precise positioning of the machine for different applications. Efficient cooling system: The micro-spray lubrication system cools the tools with minimal lubricant consumption, extending tool life and reducing material waste. Comprehensive equipment: The tapping machine includes a chip blow-off system, improving visibility of the workpiece and increasing overall work efficiency. Design and Technology of the CORMAK RGE36PWx1700 Tapping Machine The CORMAK RGE36PWx1700 features a robust construction designed for efficient and precise tapping in various industrial environments. The machine is powered by a servo drive, ensuring reliable operation and accurate control of tapping parameters. Thanks to the tapping arm and rotating motor assembly, the machine can perform threading in a wide range of materials, including steel, stainless steel, aluminium, and non-ferrous metals. The tapping arm is equipped with a quick-change tool holder, allowing fast and convenient installation of taps. Adjustable overload clutches integrated into the tap holders provide additional tool protection during operation. This system also allows precise adjustment of torque settings, ensuring accurate and repeatable tapping results. Standard Equipment of the CORMAK RGE36PWx1700 Tapping Machine Touchscreen control panel: Enables easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Rotating tapping arm: Allows thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long-term durability. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE36PWx1700 Tapping Machine Parameter Value Power 2 kW Power supply 230 V Weight 56 kg Bodevugrqspfx Abtell Maximum arm reach 1700 mm Maximum spindle speed 125 rpm

Condition: new, Year of construction: 2026, The Cormak M200S is a professional bench grinder that combines high precision, reliability, and durability. Thanks to its robust design based on a solid rotor equipped with bearings from NSK, one of the world's leading bearing manufacturers, it ensures quiet and stable operation both in demanding workshop environments and during occasional home use. This is a double-disc bench grinder with a base, equipped with a powerful 0.9 kW motor that generates high torque – essential for efficient material removal as well as fast and uniform surface finishing. The three-phase 400 V power supply ensures stable operation even during long-term use. This stationary grinder is equipped with two grinding wheels measuring Ø200 × 32 mm, allowing the machining of larger elements made of wood, metal, or plastics. Lightweight yet durable plastic guards provide safe operation and protect the operator from sparks and debris. An additional advantage of this bench grinder with a base is the intuitive control panel and the possibility of connecting a dust extraction system, which significantly improves working comfort and hygiene. Why choose the Cormak M200S grinder? Double-disc design with a solid base – ideal for stationary operation Quiet and reliable 0.9 kW motor powered by 400 V Large Ø200 mm grinding wheels – fast and precise grinding Safe plastic guards – improved user comfort and protection Compatibility with dust extraction systems – cleaner working environment The Cormak M200S double-disc grinder is an indispensable machine for every workshop, woodworking shop, and metalworking facility. If you are looking for a reliable and durable machine capable of handling various materials, the Cormak M200S bench grinder with a base will be an excellent choice. Technical specifications Parameter Value Grinding wheel size 200 × 32 mm Grinding wheel bore 32 mm Grinding wheel grit K36 / K60 Speed 2960 rpm Motor power S1 0.9 kW Motor power S6 1.5 kW Voltage 400 V Dimensions 520 × 300 × 1130 mm Weight 26 kg Bljdpfevlkttox Abtsl S1 – motor power during continuous operation under full load. S6 – motor power during intermittent operation with idle periods accounting for up to 40% of the duty cycle.

Condition: new, Year of construction: 2026, CORMAK PT260 400V Planer Thicknesser – Compact Professional Woodworking Machine The CORMAK PT260 400V planer thicknesser is a modern, compact workshop-class machine designed for precise processing of sawn timber. This functional combination of a surface planer and thickness planer offers high efficiency, solid construction, and versatility when working with wood materials. Thanks to its robust design, ergonomic operation, and reliable performance, this woodworking machine is an excellent solution for carpentry workshops, technical laboratories, and professional home workshops. Main advantages of the machine S6: 2.6 kW motor – high torque reserve enables efficient machining of hardwood and long-term operation without overloads. Stable 170 kg construction – cast iron precision-ground tables and rubber vibration-damping feet ensure safe operation, reduced vibration, and high-quality cutting results. Quick mode change system – simple switching between surface planer and thickness planer functions improves efficiency during varied woodworking tasks. Three-knife cutter block – Ø75 mm shaft rotating at 4000 rpm provides a smooth surface finish and minimizes the need for additional sanding after planing. Wide adjustment range – smooth adjustment of the table and fence allows precise adaptation to different types and sizes of material. Construction and technology The CORMAK PT260 400V planer thicknesser is manufactured using high-quality steel and cast iron components. The working tables (1100 × 250 mm and 600 × 248 mm) are milled and ground, ensuring a perfectly flat surface for accurate material guidance. The aluminium fence measuring 700 × 150 mm with adjustable angle from 90° to 45° allows easy machining of bevelled edges and angled surfaces. The thicknessing table is centrally guided on a rigid column, and height adjustment is carried out using a precise handwheel with a graduated scale, ensuring accurate and repeatable settings. Precision and working efficiency The CORMAK PT260 400V provides a maximum cutting depth of up to 3 mm, allowing effective removal of excess material while maintaining precise dimensional control. The 6 m/min feed speed ensures efficient operation while maintaining excellent surface quality. The Ø100 mm dust extraction outlet enables effective connection to a chip extraction system, improving operator comfort and extending the service life of cutting tools. Standard equipment Ø75 mm cutter shaft with 3 knives 250 × 30 × 3 mm Surface planer table: 1100 × 250 mm Thicknessing table: 600 × 248 mm Adjustable aluminium fence 700 × 150 mm (90°–45°) Rubber vibration-damping feet Ø100 mm dust extraction outlet Operating manual (DTR) CE Declaration of Conformity Technical specifications Parameter Specification Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction outlet diameter 100 mm Fence tilt angle 90°–45° Number of knives 3 Knife dimensions 250 × 30 × 3 mm Surface planer table dimensions 1100 × 250 mm Thicknessing table dimensions 600 × 248 mm Maximum planing width 250 mm Maximum planing depth 5 mm Maximum thicknessing cutting depth 3 mm Maximum thicknessing height 180 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W) 1100 × 250 mm Weight 170 kg Motor power S1/S6 S1: 2.0 kW / S6: 2.6 kW Bledpfewt Axpsx Abtol Power supply 400 V Operating manual (DTR) Yes CE Declaration Yes

Condition: new, Year of construction: 2026, LUFT screw compressor represents a modern solution in pneumatics, combining high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance ensure efficient and trouble-free operation. The LUFT 1000 stands out with its direct drive system, which delivers significantly higher efficiency and lower power losses compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher output with reduced energy consumption. The compressor generates a maximum pressure of 10 bar. Full control over operating parameters is provided by an intuitive electronic control panel from the MAM series, giving access to key compressor data and increasing flexibility and process control. Technical specifications Motor power: 7.5 kW Voltage: 400 V / 50 Hz Air delivery (0–6 bar): 990 L/min Bodpfsy E Hpcjx Abtell Air delivery at 6 bar: 950 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 930 L/min Outlet connection diameter (G): 1/2" Dimensions: 810 × 610 × 850 mm Weight: 160 kg

Condition: new, Year of construction: 2026, CORMAK OE4.0 TUNGSTEN ELECTRODE GRINDER – PRECISE TIG SHARPENING 1–4MM The CORMAK OE4.0 tungsten electrode grinder is a professional device designed for welding shops and industrial workshops, enabling fast, precise and repeatable preparation of TIG electrodes with diameters of 1–4mm. Thanks to its compact, solid construction and adjustable rotational speed, it ensures welding arc stability and the highest weld quality. Main advantages of the CORMAK OE4.0 grinder Versatile operation: one device for angle sharpening, end grinding and cutting the electrode to length. Precise sharpening angles: 15°, 18°, 22.5°, 30° ensuring repeatable results and a stable welding arc. Rotational speed adjustment: adaptation to the electrode diameter ensures process control and minimises the risk of overheating. Compact and mobile construction: easy to carry, ideal for workshops and service work. Low noise level and safety: fully compliant with EU standards, equipped with guards and occupational safety micro-switches. Complete consumables set: spare motor brushes included, increasing reliability and continuity of operation. Construction and technology of the device The CORMAK OE4.0 grinder has been designed for professional preparation of tungsten electrodes. A solid spindle bearing and precisely made housing construction minimise vibrations during operation. The 750W motor with rotational speed adjustment (up to 11,000rpm) allows the sharpening process to be adapted to the electrode diameter, ensuring repeatable results. The grinding disc cooling system and ergonomic electrode mounting guarantee safety and device durability. Precision and work efficiency Thanks to adjustable sharpening angles and the end grinding function, the CORMAK OE4.0 enables tungsten electrodes for TIG welding to be prepared in a repeatable and efficient way. Each electrode is sharpened according to the required specification, which directly translates into arc stability, reduced spatter and savings in welding material. The electrode cutting function allows the electrode length to be quickly adapted to the requirements of the welding station. Application of the tungsten electrode grinder The CORMAK OE4.0 device is used in: TIG welding, both AC and DC, in industrial and production plants, Bedozfgi Hjpfx Abtoll welding workshops, service departments and repair points, industrial installations requiring high precision and repeatability of welds, production processes where electrode preparation time and quality are crucial. Standard equipment CORMAK OE4.0 grinder with electrode sharpening, end grinding and cutting functions, Guards and micro-switches compliant with occupational safety standards, Spare motor brushes, User manual and CE and EC conformity documentation. Technical parameters – CORMAK OE4.0 Power supply 230V 50–60Hz Motor power 750W Rotational speed 11,000rpm Electrode diameter range 1.0–4.0mm Minimum electrode length 30mm Sharpening angles 15°, 18°, 22.5°, 30° Disc diameter Ø33.5 × Ø5 × 2.4mm Dimensions 340 × 76 × 76mm Weight 1.6kg

Condition: new, Year of construction: 2026, functionality: fully functional, Set including LUFT 700 screw compressor, N10S refrigeration air dryer. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Blodorh E Diopfx Abtel Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, CORMAK MJ45-KB4 - 2000 Panel Saw with Scoring Unit The CORMAK MJ45-KB4 - 2000 is a professional panel saw with a scoring unit, designed for precise woodworking in professional woodworking shops, production facilities, and service workshops. The machine combines industrial-level performance with the cutting accuracy required for processing furniture boards, MDF, and plywood. Its stable construction, independent scoring blade drive, and carefully engineered guiding systems ensure repeatability and cutting quality at an industrial level. Main Advantages of the Machine 2000 mm aluminium sliding table – ensures smooth movement and precise material guidance. Independent 0.75 kW scoring motor – eliminates chipping and tearing on the underside of the material. Powerful main saw motor – 5.5 kW (9 HP) motor provides efficient cutting performance in hard materials. Stable cast iron construction – resistant to vibrations, improving precision and operator safety. Telescopic support arm with ruler and two stops – enables accurate positioning of the workpiece. Cutting width up to 1250 mm – ideal for formatting large panels. Ergonomic adjustment knobs for blade angle and height – allow fast tool-free setup. Construction and Technology The MJ45-KB4 - 2000 is based on a heavy cast iron body, providing excellent resistance to twisting and maintaining stable geometry throughout years of operation. Bledpfx Abetz Sm Astol The cutting unit operates inside a rigid housing, which reduces vibrations and increases blade durability. The sliding table guidance system is based on hardened steel rods and precision linear bearings, ensuring smooth movement and eliminating play during cutting. The machine is also equipped with a roller support table, making it easier to handle large-format materials. Precision and Work Efficiency Thanks to high blade speeds of up to 6000 rpm and a precise guiding system, the MJ45-KB4 panel saw provides perfectly straight and clean cutting edges, even when processing layered panels. The scoring blade, rotating at 8000 rpm, effectively eliminates laminate chipping and tearing. The adjustable cutting angle range of 0–45° allows the operator to perform complex formatting operations with full control. Applications The MJ45-KB4 - 2000 panel saw with scoring unit is designed for intensive use in: woodworking workshops, furniture manufacturing plants, prototype production departments, architectural and model-making studios. It is ideal for processing: MDF boards, HDF boards, OSB panels, plywood, laminates, solid wood. The machine design allows quick setup changes and efficient production of both short series and individual projects without compromising quality. Standard Equipment 2000 mm aluminium sliding table Independently driven 0.75 kW scoring unit Telescopic support arm with ruler and two stops Roller support table Folding parallel fence Telescopic rip fence Adjustment knobs for blade angle and height Technical Specifications Parameter Value Sliding table length 2000 mm Cutting width 1250 mm Saw blade tilt range 0–45° Maximum cutting height at 90° 80 mm Maximum cutting height at 45° 56 mm Maximum main blade diameter 315 mm Maximum scoring blade diameter 125 mm Main saw speed 4000 / 6000 rpm Scoring blade speed 8000 rpm Main motor power S1/S6 5.5 kW / 9 HP Scoring motor power S1/S6 0.75 kW / 1.2 HP Weight 460 kg