Used Dental 3D Scanner for sale (1,893)

Condition: used, Year of construction: 2012, Electric motor, three-phase motor, brake motor -Manufacturer: Nord, electric motor with brake -Type: SK80S/4 3D BRE5 TF -Power: 0.55 kW -Speed: 1385 rpm -Brake: 5 Nm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 55 Fgjdpfet Drkgex Am Tod -Quantity: 1x engine available -Dimensions: 340/220/H160mm -Weight: 11 kg

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Fgjdpfju S N R Ejx Am Tod Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. Fgjdpfx Amszhlr Eo Ted The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 08812-00-6627, Year of construction: 2021, total length: 1,300 mm, total height: 1,920 mm, total width: 1,740 mm, type of input current: AC, overall weight: 550 kg, input voltage: 230 V, input current: 32 A, shaft length: 1 mm, path measurement accuracy: 1 mm, temperature: 420 °C, input frequency: 60 Hz, sheet thickness aluminum (max.): 1 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.011 mm, wall thickness: 1 mm, electrical fuse: 32 A, table width: 1,000 mm, table length: 1,000 mm, repeat accuracy: 0.011 mm, workpiece weight (max.): 50 kg, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, power: 4 kW (5.44 HP), travel speed (max.): 12,000 mm/min, space requirement length: 1,300 mm, space requirement height: 1,920 mm, noise level: 55 dB, operating temperature: 60 °C, space requirement width: 1,740 mm, Equipment: CE marking, We are offering our CreatBot F1000 industrial FDM 3D printer, which was meticulously utilized for prototyping large-scale engineering parts. This machine has spent its operational life in near-laboratory conditions - housed in a dedicated, dust-free cleanroom with internal air ventilation. Fedpfxjzhr Rhe Am Togd It is in fully operational, working condition and has been heavily upgraded for enhanced print stability, superior surface finishes, and maximum reliability. This unit features hardware and software optimizations that make it perform significantly better than a stock factory model: - Upgraded Print Head ($500 Value): Swapped with the newer, more advanced print head from the CreatBot D1000 model for superior extrusion control. - Upgraded Software: Flashed with the updated CreatBot D1000 software suite for smoother operation and better motion profiling. - Premium PEI Build Plates ($550+ Value): Includes two (2) custom 1000x1000 mm steel sheets finished with a single-sided golden textured PEI powder coating (replaces the original metal squares). These provide an ultra-smooth first layer and incredible print adhesion. - Advanced Thermoregulation: Custom canvas insulation panels added to the doors. This ensures an even internal chamber temperature, reduces warping on large prints, and significantly lowers power consumption. - Low-Friction Filament Rollers: Custom-engineered rollers dramatically reduce filament drag and physical strain, virtually eliminating the risk of filament breakage mid-print. - Fully Rebuilt Filament Drying Compartment: Completely re-engineered for flawless material storage. Features a separate digital controller, high-precision temperature sensor, the original heating element/fan, and an additional external fan for perfectly even heat distribution. You can easily set and maintain any achievable drying temperature. - Precision Z-Offset Tool: Comes with a specialized micrometer calibration tool to check and perfectly dial in the Z-axis nozzle distance before launching massive print jobs. - Materials Printed: Primarily used to print PETG, with a small amount of ABS and PLA. - Recent Major Maintenance: This machine has been frequently serviced. All X, Y, and Z axis tension belts were replaced very recently and have minimal operating hours on them. - Testing: The printer is fully operational and can be tested upon request prior to collection. What’s Included in the Sale: The upgraded CreatBot F1000 3D printer unit - 2x Custom 1000x1000mm Golden Textured PEI Build Sheets - Special Z-offset micrometer calibration tool - Massive Spare Parts Package: All original OEM items that were upgraded are included in the sale, alongside a large stash of extra printing heads, various nozzle sizes, spare filament, and more. Delivery Terms: EXW (Ex Works) Logistical arrangements and shipping costs are entirely the responsibility of the buyer. However, we will happily pack and secure the printer safely for freight transit on our end to ensure it leaves our facility in perfect condition.

Condition: used, Laser Stereo Camera Factory refurbished with warranty The Leica BLK3D is a photo-based measurement solution. Each photo captured is a complete measurement report containing height, width, and depth measurements. Measurements can be created at any time, immediately on-site using the handheld BLK3D imager or at any time afterward using the BLK3D desktop software. The BLK3D device combines a calibrated stereo camera, measurement sensors, software, and integrated edge detection capabilities to perform in-image measurements with professional accuracy. Each captured image is a complete and precise 3D measurement report. Fgedpjv Ntbbefx Am Tsd Stereo Camera: Field of View 80° Focal Length 4 mm Aperture F 3.0 2x Synchronous LED Flash Intuitive Android Operating System 65 GB Storage; Space for thousands of digital images Fast data transfer via USB-C and Wi-Fi Rechargeable battery lasts a full day 180 x 77 x 27 mm 480 g Laser accuracy Accuracy under favorable conditions +/- 1 mm Range under favorable conditions 250 m Availability: Short-term Storage location: Hochheim With tripod adapter With device bag With DST 360 set including DST 360 adapter, TRI120 tripod, shoulder strap, and carrying case

Year of construction: 2018, condition: new, Demonstration machine Year of manufacture: 2018 With full warranty Features and technical data: Functionality · Room geometry capture via laser measurements · Total station function: standard measurement points can be augmented by custom measurement points · Complex 360° panoramic capture from each room scan · Image and measurement functions for every detail · Complete photographic documentation · Preview panorama display via HottScan app · Data transfer via USB stick or WiFi with app Technical Data Overview Angle meter features Measurement range: Horizontal 347°, Vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05–80 m Laser class: 2 Laser type: 650 nm; < 1 mW Laser spot diameter (at distance): 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & light conditions Operation User interface: Control panel with soft-touch keys and LED lighting/Display of battery capacity/status and error indicators Data exchange Flash memory: 32 GB, USB and WiFi Range: 50 m (depending on environment) Power supply Power adapter: 14.8 V, 1.2 A, with a cut-off voltage of 16.8 V, primary voltage 100 V – 240 V, 19.5 VA, 50/60 Hz Battery: operating range between 11.2 V and 16.8 V Runtime: Up to 11.5 hours, depending on use of LED lighting; approx. 8 hours under typical use Environmental Conditions Operating temperature: operation and battery charging: +0° to +40° C Storage temperature: -20° to +50° C Dust and moisture: IP 40 Special Features · Hot Swap: the replaceable battery can be exchanged during operation in just seconds · Integrated lighting assists in poor lighting conditions · Mobility: Lightweight (approx. 4.7 kg) combined with a foldable tripod makes the HottScan HS-1 a compact tool for on-site inspection and maintenance jobs Your Advantages · Mobility (light weight) and long battery life · Avoidance of multiple on-site visits · Battery change within seconds · Free loan device in case of servicing from the 3rd business day Includes HottScan Room Modeler full version Fgjdpfxew I Uizs Am Tsd Software for generating a 3D room model from scanner data, export of quantity data in CSV format, geometry export in DWG/DXF format with layer structure, and Collada format Performance scope · Simple room modeling from first-person perspective · Export of quantity data in CSV format · Geometry export: DWG/DXF format with layer structure and Collada format with textures; continual post-processing possible in all 3D CAD programs Includes transport case for HottScan 3D room scanner · Weather-, corrosion- and temperature-resistant aluminum sheet · Lid and bottom profiles welded at the seam · 2 stainless steel hinges · 2 lever-lock clasps · Continuous rubber seal providing dust and splash water protection · Temperature resistance from -40°C to +80°C Interior · Egg-crate foam in the lid · Foam insert in the base with product-shaped cut-outs Availability: Short notice Location: Flörsheim

Condition: good (used), German RepRap (innovatiq) Type: German RepRap X500 Fgodpfxjzg Tz Ee Am Tod RepRap 3D printer Technical specifications: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition modeling (FDM/FFF) Dimensions: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s XY precision: +/- 0.05 mm Max. volume: 500 × 400 × 450 mm Power: 230 V AC, 50 Hz, 10 A, 2.3 kW Other features: Touchscreen Condition: used Scope of delivery: (See pictures) + Filament spools (PETG) and printing accessories Only PC (WIN 7) available! Screen and input devices not included! A license for the current software required to operate the printer must be purchased separately by the customer (approx. 200 euros for Simplify3D)! (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture: 2021 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with automatic cleaning system Fgsdezg Tzlepfx Am Tod Filament diameter: 1.75 mm Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic swapping system Print head temperature (max.): 500°C Heated bed temperature (max.): 180°C Build chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2016, operating hours: 25,187 h, functionality: fully functional, The Mazak 3D Fabri Gear 400 II is a 6-axis 3D laser cutting machine designed for cutting tubes and profiles, specifically engineered for processing large-diameter materials and structural shapes. The 2016 model is typically equipped with a 4.0 kW Panasonic CO2 laser resonator and specialized 3D heads for complex cross-sections. Key technical parameters (2016 model): Laser type: 4.0 kW (4000 W) CO2 resonator Maximum material length: 12,000 mm (12 m) Maximum tube diameter: approx. 406 mm (16") Maximum square profile: 254 mm x 254 mm (10" x 10") Fjdjzg U Tpjpfx Am Togd Axes and movement: 6-axis control (X, Y, Z, A, B, C) Control unit: Mazak FX Maximum workpiece weight: approx. 480 kg Functions and capabilities: Material types: Carbon steel, stainless steel, and structural profiles (I-beams, channels, angles). 3D head: Rotatable 3D laser head with a touch sensor (probe) and an auto-focus system. Automation: Weld seam detection and automatic material measurement. Optional equipment: Threading unit (enables cutting and threading in a single cycle) V-TYPE FEEDER Machine operating hours: 25,187 hours. Link to machine video:

Condition: used, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, type plate available, We are offering this used Keyence VL-500 optical 3D coordinate measuring machine, manufactured in 2020. Manufacturer: Keyence Corporation Model: VL-500 Country of origin: Japan Year of manufacture: 2020 Serial number: CC910026 System consists of: Control unit: VL-500 Base/object table: VL-530 Measuring head: VL-570 Calibration plate Manuals Fjdey Uw Dvepfx Am Togd Dongle PC Last calibration performed by the manufacturer in 11/2024. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2015, condition: ready for operation (used), A 5-axis dental CNC milling and grinding machine from imes-icore is offered. A-axis: 360°, B-axis: 115°, axis inclination with 98mm blank: A-axis/B-axis: 30°/25°, max. machining area: 94mm/30mm, blank holder: 98.5mm, workpiece holder: 1 blank, max. spindle speed: 60000rpm, spindle power: 1.0kW, tool holder: 6mm shank, tool changer: 20, tool length measurement: ≤0.002mm, control system: Logosol 5-axis. Machine dimensions X/Y/Z: approx. 758mm/790mm/857mm, weight: approx. 180kg. Inspection by appointment possible. Fjdpfx Aszklfwjm Togd

Condition: good (used), Good day, we offer here used clamping devices from Erowa. These belong to the PalletSet W and are for Wire EDM machining. The following parts are available: Fixed holder ER-030678 Floating holder 3D ER-030923 They have been cleaned and tested by us. In addition, a functional test was carried out. The clamping devices have slight traces of use, and are technically in a very good condition. Individual acceptance also possible. Spare parts are available. Do you have any questions? Then we are at your disposal. Fgodpfx Asp Eb Dvjm Tsd

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 268 h, input voltage: 240 V, input current: 12 A, input frequency: 60 Hz, power: 0.6 kW (0.82 HP), We offer this used Zaxe Z3 3D printer, manufactured in 2024. Product name: Zaxe Z3 3D Printer Input voltage: 100 - 120 V and 200 - 240 V Input current: 12 A and 7.5 A Frequency: 50 - 60 Hz Power: 600 W Printing time: 268 hours If you have any questions or require further information, please send a message or contact us by phone. Fgodpfx Amezhtilj Tod

Condition: used, Year of construction: 1994, Technical Specifications: - Manufacturer: IST - Year of manufacture: 1994 - Working width: 1300 mm - With 3D mirrors - Number of tubes (viewed from above): 1 - Tube positioned at an angle - Electrode spacing 1620 mm Fgjdpfx Aezf N Tnsm Tod - Suitable for drying edges - Suitable for mercury and gallium tubes. - Tube power 80 W/cm - For mounting on an existing conveyor - Location: in storage - Volts, Hz 400 / 50 - Good condition

Condition: used, Year of construction: 2016, machine/vehicle number: 9960-10-1059, techncal data: - Producer: Printworld Fodpfx Aezf N Rgjm Tegd - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A - Location: on stock

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm Fgsdpfx Aezf N Niom Tod - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes Fedpfx Aezf N Edom Tegd - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: used, Stratasys Objet Objet30 Prime V3 + Cleaning Glovebox Technical specifications: Machine: 82.5 × 62 × 59 cm; 106 kg Build platform: 294 × 192 × 148.5 mm Layer thickness: 28 µm; 16 µm for VeroClear material Fodpfx Amszgcqce Togd Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material, and post-processing method Model materials: Transparent, rigid (VeroClear) Rigid, opaque, white (VeroWhitePlus) Rigid, opaque, blue (VeroBlue) Rigid, opaque, black (VeroBlack) Rigid, opaque, gray (VeroGray) Polypropylene-like (DurusWhite and Rigur) Heat-resistant (RGD525) Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Manufacturer: Objet/Stratasys Type: Objet30 Pro Condition: used Scope of delivery: (See pictures) (Subject to changes and errors in the technical data and information!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax.

Year of construction: 2023, operating hours: 20 h, condition: new, functionality: fully functional, 🔥 3D printing filament Extrusion Line – DEMO Unit | 1.75–5 mm | Up to 100 m/min | 12 months warranty High-performance extrusion line for production of filaments (3D printing, welding wires, technical strings). Reliable, fully automated solution directly from manufacturer. Completely made in the European Union. Fgjdpfx Amey Ipflj Tjd _____ Key Features • Materials: ABS, PLA, PET-G, MARLEX, DOWLEX and others • Filament diameter: 1.75–5 mm • PLC control with an automatic operation • Triaxial measurement for precise diameter control • Continuous production (compensator - up to 140 m of filament) • 3-zone cooling tank (up to 80 °C) _____ Technical Data • Line speed: up to 100 m/min • Output: 5–20 kg/h • Screw diameter: 35 mm • Screw length: 30 L/D • Drive power: 9.2 kW • Cooling tank: 6 m • Spool size: 0.5–5 kg (no downtime during change) _____ Condition • DEMO unit – directly from manufacturer • Excellent condition • Available immediately • Full factory warranty for 12 months FCA BOCO price: 158 850,- EUR w/o VAT _____ Manufacturer BOCO Pardubice Machines, s.r.o. (Czech Republic) Over 30 years of experience in plastics processing technology

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) Fedpfx Asyvhwism Tjgd - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: - Print job preparation: UltiMaker Cura 5.7.1 or newer - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: reconditioned (used), For Sale: EOS M400-4 – High-Performance Metal 3D Printer Fodpozk Ekgsfx Am Tegd This EOS M400-4 is a state-of-the-art metal additive manufacturing system located at the customer’s site. It is equipped with 4 (four) 400W lasers, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 4 x 400W • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1, K500 • Aluminum alloys: Al2139 AM, AlSi10Mg, Constellium CP1 • Case Hardening Steel: CaseHardeningSteel 20MnCr5 • Stainless steels: 17-4PH, CX, 316L, PH1 • Tool steels: MS1 • Titanium alloys: Ti64 (grade 23, grade 5), TiCP (grade 2) Why Choose the EOS M400-4? • Large build volume for industrial-scale production. • High throughput for speed and precision. • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality, refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled former EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Condition: like new (used), Year of construction: 2017, operating hours: 485 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, Manufacturer + model: STILL EXV 14 C * EX * Miretti 2G / Zone 1 - 3D / Zone 22 * Mast: 2F2350 ID: 26080.9198 Category: Used Mast: 2F2350 Lowered height: 1680 mm Lifting height: 2350 mm Capacity: 1400 kg Year: 2017 Hours: 485 hours Battery: Complete NEW * 24v / 240ah * Manufactured 04/2026 Options: * EX * MIRETTI - E7935 Fgjdpfxszk Dnqs Am Tsd System / Certificate = TUV - CY 16 ATEX 0205756 Gas group = IIB Type = Cat 2G (allowed in ZONE 1 and 2) Temperature class = T3 Gb=====Dust group = IIIB Type = Cat 3D (allowed in ZONE 22) Temperature class = 200*C ( = T3) C - Db

Condition: like new (used), Year of construction: 2017, operating hours: 633 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, Manufacturer + model: STILL EXV 14 C * EX * Miretti 2G / Zone 1 - 3D / Zone 22 * Mast: 2F2350 Fgjdjzk Dkropfx Am Tsd ID: 26082.2204 Cat.: Demo Mast: 2F2350 Forks: 1250 mm Lowered height: 1680 mm Lifting height: 2350 mm Capacity: 1400 kg Year: 2017 Hours: 633 hours Capacity: Complete NEW * 24v / 240ah * Manufactured 04/2026 Options: * EX * MIRETTI - E7936 System / Certificate = TUV - CY 16 ATEX 0205756 Gas group = IIB Type = Cat 2G (permitted in ZONE 1 and 2) Temperature class = T3 Gb Dust group = IIIB Type = Cat 3D (permitted in ZONE 22) Temperature class = 200*C ( = T3) C - Db

Condition: good (used), Year of construction: 1994, Max pressure space : L 1900 x H 1800 mm Incl. OBEL-P High Frequenz unit. Chair seat bending : 3-4 min. pr cycle. Still connected to power. Can be examined in working condition. 1). 3D pressure can meet different shapes of plywood bending requirement and help customer develop more designs. 2). HF heating is dielectric heating. It heats products by friction of water melocules, fast, uniformly and effective 3). HF power is selective heating. It focus on glue heating but not heat the wood material, saving energy. 4). High quality. After pressing, plywood shape is steady and hard to change. 5). HF bending press can work with metal mold, plywood mold as well as MDF mold. There are more choice for end user. Customer can make mold themselves easily. 6). HF power needs only electricity, clean and dust free. Fedszi Hpuopfx Am Togd

Condition: refurbished (used), functionality: fully functional, Erowa 3D probe with overrun protection, completely overhauled and fitted with a 5 mm ball. I can also sell replacement probes. Fgedpszkbnhsfx Am Tod