Used Dgs System Gmbh Mbf 326P31,75 for sale (87,627)

Year of construction: 2016, condition: as good as new (ex-display), 1 piece. Heavy-duty gearbox Manufacturer: NORD DRIVESYSTEMS Type: SK9082.1/52 1 piece, left-hand version Shaft diameter 110 mm, shaft length 210 mm M/2 12000 Nm i123.13 Overall dimensions (horizontal mounting): Length 1200 mm Width (with shaft 210 mm) 600 mm Bjdpsh Igwhsfx Apvodf Height 600 mm Weight per unit: 620 kg Like new, only test run. Can be mounted horizontally or vertically.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Place: Austria Bdjdpfoxy Rddox Apvef Available immediately

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 32 h, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 400 mm, conveyor belt speed: 4,000 mm/s, total width: 1,060 mm, total height: 1,800 mm, overall weight: 350 kg, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 10 A, Equipment: documentation/manual, emergency stop, Inside width: 400 mm Length: 2000 mm Bdjdpfxexuq Dgo Apvof Driving power: 3 kW Operating voltage: 3 x 400 V AC + PEN, 50 Hz

Condition: new, Year of construction: 2025, Minimum requirements for the forklift: 4 wheels; at least 2 tons lifting capacity; an additional oil channel available; fork length not less than 1200 mm; fork cross-section: maximum width 150 mm, maximum thickness 60 mm; minimum fork spacing: 700 mm. Bjdpjxy N Dpefx Apvodf

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Bdsdpjxy E H Hofx Apvjf Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Bdodpoxy Idhsfx Apvef Available immediately

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Bdjdpfxoxy Hbxs Apvjf Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Machnie weight: 51 to Place: Austria Available immediately

Condition: like new (used), functionality: fully functional, RMVI-3030-1-015 Bedpfx Apsxy Imievodf RMVI-3030-1-014 RMVI-3030-1-013 RMVI-3030-1-012 RMVI-3030-1-011 MR-2002-4-27

Condition: new, Year of construction: 2025, functionality: fully functional, Place: Austria Available immediately Bjdsxy Nkpspfx Apvjdf

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,822 h, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 10 Year of manufacture: 2014 Briquette diameter: 105 mm Technical Data Main Dimensions Length x Width x Height: 4,250 x 3,600 x 2,200 mm Weight approx.: 10 t Briquette diameter: 105 mm Briquette height depending on material: approx. 60 - 120 mm Performance Data Cycle time: 10 sec. Hourly capacity: - Aluminium: 850 - 1,060 kg/h - Steel, cast: 1,800 – 2,000 kg/h - Nickel: 1,800 – 2,000 kg/h Briquette weight (aluminium): 2.0 – 2.5 kg Briquette density (steel, cast): 5.5 kg/dm³ Briquette density (aluminium): 2.2 – 2.5 kg/dm³ Hydraulic System Bdjdoxy E Evopfx Apvsf Number of power-regulated axial piston pumps: 2 units Power requirement per pump unit: 30 kW Operating pressure: 300 bar Hydraulic tank volume: 1,300 l Electrical Equipment Drive power: 70 kW Control voltage: 24 V DC Operating voltage: 3 x 400 V / 50 Hz

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Hauptabmessungen 2965 × 1000 × 570 mm (ohne Dreheinrichtung) Gesamtgewicht 2 595 kg (ohne Dreheinrichtung) Betriebsdruck 100 bar Zylinderduckkraft 380 kN Bodpfxsxy E Sio Apvodf Betriebsdruck max. 160 bar Zylinderduckkraft max. 610 kN Maulöffnung ca. 300 × 300 mm Schneidleistung Rundstahl Ø 75 mm; Quadratstahl 65 × 65 mm; Rohr AD 273 × 16 mm; IP-200, C-280, L-220 Schneidmesser beidseitig verwendbar Schnittspalt einstellbar Dreheinrichtung Verdrehen über Ölmotor und Kettentrieb

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Bedpfxoxy Iiko Apvedf Available immediately

Condition: like new (used), functionality: fully functional, Z1015201800 Bodpfxoxy I D Uj Apvodf Z1010880270 etc.

Condition: new, Year of construction: 2026, overall weight: 3,900 kg, fuel type: diesel, tank capacity: 600 l, color: dark red, power: 2,000 kW (2,719.24 HP), output current: 360 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 200 kW (271.92 HP), nominal power (apparent): 250 kVA, continuous power: 200 kW (271.92 HP), continuous power (apparent): 250 kVA, total length: 4,000 mm, total width: 1,450 mm, total height: 2,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, Diesel generator set, 250 kVA Generator type: P250SSF Condition: New, 2026 Engine: Perkins 1206A-E70TAG2 Generator: Leroy Somer LSA 46.3 M7 Rated power (standby power/ESP): 275 kVA / 220 kW Rated power (prime/PRP): 250 kVA / 200 kW Rated power (continuous/COP): 200 kVA / 160 kW Rated voltage: 230/400 V Rated frequency: 50 Hz Control voltage: 12VDC Speed control: electric Voltage control: electric (AVR) Soundproofed, weatherproof Bdodpfofxlddjx Apvof Network configuration: TN-C Including control panel Including batteries (2 x 110Ah) Including integrated fuel tank (600 L) Including integrated spill containment basin for fuel and engine fluids Including circuit breaker (ABB, 4P) Including documentation/manual Including wiring diagram Warranty: 12 months or 2000 operating hours, whichever comes first. You can configure your generator individually and order numerous additional options: - Socket package 16A - 125A with RCD (residual current device) - Remote control - Insulation monitoring - Extended sound insulation, up to 65 dB/7m possible - Fully automatic automatic transfer switch (ATS) with automatic mains-generator changeover available on request. - Parallel operation with load sharing and peak load management (ComAP IG 1000 controller, VDE 4510 certified) - CHP (combined heat and power) version - ATS for indoor installation with air ducts, supply and exhaust ventilation, etc. Manufactured in Germany Delivery throughout Germany possible for an additional charge. Contact us by email or call us, we will be happy to advise you and provide you with a non-binding offer.

Year of construction: 2015, condition: repair required (used), functionality: limited functionality, total length: 13,000 mm, total width: 4,520 mm, total height: 2,550 mm, machine/vehicle number: 201507-025, WATERJET CUTTING MACHINE & BONDING STATION: The system is part of a larger production line; please also refer to our other listings. In this offered system, EPS/XPS raw panels (manually loaded in the feed magazine) are bonded end-to-end into a continuous strand. Subsequently, formatting is carried out with the waterjet cutting machine, including cut-outs and groove milling. An ejector station and belt conveyor at the end of the line are also included in the scope of supply. RAW MATERIAL DIMENSIONS: Length: 1500mm - 2500mm Width: 600mm - 1250mm Height: 20mm - 50mm WATERJET CUTTING MACHINE: Bedpfoytp U Ajx Apvjdf cut Expert variojet (Manufacturer: expert international GmbH, formerly expert systemtechnik GmbH) INCLUDES: Adhesive unit (Nordson), milling spindle (Jäger)

Year of construction: 2016, condition: excellent (used), functionality: fully functional, We are offering this very well-maintained cooling system from IKS Industrielle Kühlsysteme GmbH, year of manufacture 2016. The system operated without any issues until it was decommissioned in 05_2025 and received regular maintenance. If you have any questions or require further information, please send us a message or give us a call. Due to the size and complexity of the system, it is only offered for sale after a prior inspection. Bdodpfjyx Hb Ejx Apvef

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16501575, volume flow: 4,800 m³/h, input voltage: 380 V, power: 2.5 kW (3.40 HP), Equipment: type plate available, The resulting dirt particles, emulsion and oil mist, as well as smoke, are captured directly at the source and passed through the individual filtration stages. The separated liquid collects at the bottom of the unit and can be returned to the machining center via the siphon. In the first filtration stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filtration stage removes the majority of fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the degree of contamination. The third filtration stage consists of a large-area HEPA filter of class H13. A consistently high filtration efficiency of 99.95% at a particle size from 0.3μ DOP is ensured here. Type testing in accordance with DIN EN 1822-1 H13 allows the filtered air to be returned to the workspace. Bjdsyz Sn Nopfx Apvedf

Year of construction: 2025, condition: new, functionality: fully functional, We are offering this new LOWA GmbH Filling and Capping Systems capping machine, model WK12-17, bottle filling and capping machine, year of manufacture 2025. Bdjdpsyybh Ajfx Apvsf Manufacturer: LOWA GmbH Filling and Capping Systems Model: Capping Machine WK12-17 Machine type: Bottle Filling and Capping Machine Year of manufacture: 2025 Condition: new Category ID: 679 If you have any questions or need more information, feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, Length 1.50 m PLC-controlled Formats up to B4 Various carrier spacing options Preset counter, total counter Bjdpfx Apoch Iv Nsvodf Control possible via reading (e.g., roll change)

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Bdodsun Sd Uepfx Apvjf Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 300 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 350 mm, table length: 700 mm, table width: 500 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, Equipment: cabin, New: SK LASER KOLLTRONIC F20iW1 – 20 W IPG fiber laser with automatic drawer system, Laser Class 1 System Concept - Complete system consisting of fiber laser + Workstation 1 with a drawer system for efficient loading and unloading. - Automatic initiation of the laser job when the drawer is closed. At the end of the job, the laser head is automatically retracted in the Z-direction from the working area. Workstation & Drawer System: - Sitting/standing workstation with ample legroom - Aluminum housing - Bright work light, suction connection DN50 - Drawer system: 2 positions, max. load 300 kg (150 kg per side) - Drawer dimensions approx. H = 500 mm × W = 700 mm, motorized travel - Doors monitored by sensors, safety equipment: emergency stop, interlock, safety relay Bdedsyizr Sjpfx Apvsf Axis System – SK LASER X, Y, Z travel: - X-axis 500 mm computer-controlled - Y-axis 2 × 500 mm computer-controlled - Z-axis 350 mm computer-controlled (travel distances depend on installation) - Two spindles per axis for increased stability - Axis controller - Made in Germany Laser – IPG fiber laser: - Diode-pumped ytterbium fiber laser - Output power: 20 W - Peak power: 1 mJ at 20 kHz - Pulse duration: 200 ns - Wavelength: 1060 – 1070 nm - Pulse frequency: 20–80 kHz - Beam quality M² < 1.6 - Air-cooled, power consumption < 400 W - Red pilot laser + 2 distance lasers (650 nm,

Year of construction: 2022, condition: like new (used), functionality: fully functional, We are presenting the almost brand-new EyeC GmbH EyeC Proofiler 1200 DT (EyeC 3023) Print Inspection & Quality Control System. HIGH CONVERSION DESCRIPTION Like New - Immediate Availability - Priced to Sell - Ready for Export Model: EyeC Proofiler 1200 DT Condition: Like New - barely used EyeC Proofiler 1200DT print inspection system in excellent condition, barely used and fully operational. This is a great opportunity to acquire a high-end inspection system at a significantly lower price. ✔ Print-to-Print & Print-to-File Comparison ✔ High-precision defect detection ✔ Suitable for pharmaceutical, packaging, and commercial printing The machine is installed and can be tested. Additional photos and videos are available upon request. 🌍 Available for export 📍 Located in Turkey ✈️ Delivery Terms: EXW Turkey – ready for export ⚠️ Serious buyers only - quick decision preferred 📧 Contact now for price discussion and details ▪️ Inspection Type: Print-to-print & Print-to-file comparison ▪️ Application: Print Inspection & quality control ▪️ Max. inspection width: approx. 1200 mm ▪️ Camera system: High-resolution line scan camera ▪️ Lighting: Integrated LED illumination system ▪️ Defect detection: Missing print, color deviation, misalignment, defects ▪️ Software: EyeC Proofiler Software (original) ▪️ Operation: PC-Controlled System ▪️ Speed: High-speed automated inspection ▪️ Industry: Pharmaceutical, packaging, commercial printing Bdedpfxoyxfrpe Apvof The machine is installed and can be demonstrated upon request. If you have any questions or need further information, you can send us a message or call us. You can also reach us via email or WhatsApp.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle Bdodpfx Aswymlyopvjf The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, HORIZONTAL WRAPPER GSP 55 S for sale! Machine condition: like new, used only in a showroom for demonstration purposes. The machine is supplied as follows: - Cantilever main frame and guards manufactured in anticorrosive steel plates painted RAL 9007, machine on adjustable feet. - 2.000 mm length infeed conveyor with stainless steel product contact surfaces (AISI 304); - Quick replaceable plastic pushers suitable for food use. - Longitudinal sealing unit, made by three sets of fin wheels: the first one cold, diam 100 mm to pull the film, the second one heated, diam 100 mm to seal the film; the third one cold and conical, diam 60 mm, used to drive the film; film cooling air blow. - First set of wheels opening through touch screen - Pneumatic opening of heated wheels by machine stop - Easy opening of deck plates over fin seal without any tools - 190 or 270 mm one up jaw width, rotating one with inclined knife and transversal or longitudinal welding pattern. - Safety device fitted onto the cross welding unit Motorization: - Multi-axes drive technology with : - n. 1 brushless motor for the infeed conveyor control - n. 1 brushless motor for the back seal rollers control - n. 1 brushless motor for the transversal sealing unit control - n. 1 dc brushless motor for the outfeed conveyor control - Cantilever single reel film holder for 520 mm film width, with expansion blades pneumatically activated to hold the film reel - 1.000 mm powered out-feed belt - Machine stop in phase with open cross sealing jaws. - Safety covers manufactured in anticorrosive steel plates painted RAL 9007, with safety micro-switches - Electrical cabinet - Control panel equipped with: - start button for continuous run - reset button - e-stop button - positional stop button - power presence led - 7” touch screen display with following functions: - speed setting-up - bag length setting-up - sealing units temperatures setting-up Bdedpfx Apey Tlc Dsvof - product phase - sealing jaws speed - (possibility of storing up to 100 programs) - One fixed or adjustable forming box - Set of spare parts. - Machine in left hand execution: products are loaded from the left side and are discharged to the right. (Right hand execution upon request). - Machine manufactured according to the latest CE regulations. Machine is equipped with following additional options: Main frame and infeed conveyor in stainless steel execution Gear shift on electronic machines (up to GSP 65 EVO) Photocell for print reg. film for electronic machine Product support on infeed conveyor (up to GSP 65 EVO) Each additional meter of products carrying plates (for GSP 600 EVO, GSP 600 EVO BB e GSP 75 EVO) 1.000 mm stainless steel infeed conveyor extension Provision for printer No product - no bag photocell Motorised film unwinding with Brushless motor Motorised cross jaws H adjustment Pre-heating film Two-up jaws Removable sealing jaw Cantilever sealing jaw Reel holder for 720 mm film width Double self-supporting reel holder Air blow to reject empty/double or spliced packages Adjustable pusher drop-down position Gusseting device (rotary type) Handwheel for film reel holder centering Pre-cutting unit for rotary machines Two-up jaws extra cost - Pre-cutting unit for rotary machines

Condition: used, Year of construction: 1992, The WENZEL RS 30-12-15 CNC coordinate measuring machine (3D-CMM) is suitable for precise 3D measuring tasks in quality control, production metrology, and incoming goods inspection. It is equipped with a CNC control system and a Renishaw PH10 / TP20 probe system. The large measuring range of 3,000 x 2,000 x 1,500 mm (X/Y/Z) enables the measurement of large workpieces. Bedpfxozqc Hrs Apvodf The machine is ideal for use in tool, mold, and machine manufacturing, as well as in any application where highly precise coordinate measurements are required.