Used Divimatic Dough Divider Div D 20 for sale (65,282)

Condition: used, Year of construction: 1990, color: green, mileage: 1,001 km, first registration: 01/1990, gearing type: other, driver cabin: other, Vehicle location: incoming / in transit Body: Skip containers approx. 5 m³ to 20 m³, open / lid. Various skip containers from approx. 5 m³ to approx. 20 m³. Price depending on condition from €350.00 net to €750.00 net 1x 3.5 m³ with lid 2x 7 m³ with flap 13x 10 m³ 2x 10 m³ with lid (flat) 1x 12 m³ with rear doors 1x 15 m³ with rear doors 1x 20 m³ with rear doors Manufacturer cannot be determined as the type plate is missing. While the containers are still in transit, no single containers can be offered. Minimum purchase of more than 10 or the entire lot. Location: Uder (near Heilbad Heiligenstadt) All information is provided without guarantee, as the containers are in transit! ACCESSORY DETAILS WITHOUT WARRANTY. Subject to change, prior sale and errors! Cgjdpfxow S Niwj Anfju

Condition: used, Double-sided bench grinder GREIF Type D 20-5-3 Grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 3000 rpm Codpfoy Sbw Iex Anfsgu Motor power: 0.55 kW Power supply: 380 Volt, 50 Hz - Cast iron base (original) The material rest at the left grinding wheel is missing.

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil Cooler – Inline Oil Cooler D20V D30V Cgedpfx Aneg U H E Sefou 2 inline oil coolers – Cooling system for machine cooling – Available individually. Two standalone inline oil coolers / flow-through coolers for cooling oil / hydraulic oil, manufactured by Wöhr Kältetechnik, designed for cooling/temperature control of the coolant circuit or hydraulic system of machine tools. Each unit features an integrated circulation pump and flow monitor. The housing contains an integrated control cabinet with connection cable, LAE temperature controller MTR11, and a volt-free fault contact. The built-in circulation pump is a gear pump. The cooling units are suitable for clean oil. A programming manual for the temperature controller is included. Both coolers are in used condition. Cooling Unit Wöhr Inline Oil Cooler Type D 20 V, year 1998, serial no. 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, Walter Procon plug connection (cooler was installed on the hydraulic system of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Inline Oil Cooler D 30 V Wöhr Inline Oil Cooler Type D 30 V, year 1998, serial no. 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE power plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers / oil cooling systems are in used and well-maintained condition. Price per unit: €1,950. All technical data subject to typographical or factual error. We only sell to countries within the European Union.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 6,761 h, load capacity: 2,000 kg, lifting height: 4,250 mm, free lift: 150 mm, fuel type: diesel, mast type: duplex, construction height: 2,746 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Csdsy Uz S Rspfx Anfogu Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Gearbox: 1-pedal control Condition: Reconditioned without guarantee Technical condition: good Front tires type: super elastic Front tires size: 200/50-10 NEW Front tires condition: 80 - 100% Rear tires type: super elastic Rear tires size: 18x7-8 NEW Rear tires condition: 80 - 100% Description: Handed over with new FEM 4.004 test including test book. Conversion to double pedal possible! If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We will be happy to enquire about leasing & financing as well as delivery at favourable conditions. It is also possible to trade in Linde equipment - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Side shift, fork positioner, integrated fork positioner with side shift 3rd valve, 4th valve, rear work light, front work light, half cabin, single pedal, LED,

Condition: reconditioned (used), Product information "Leadscrew and feedscrew lathe Kern D 20 A" Leadscrew and feedscrew lathe from Kern Type / Model: D 20 A Condition: Overhauled Technical data: Centre height: 215 mm Centre distance: 600 mm Csdpjy H Iqwjfx Anfjgu Spindle bore: 50 mm Bed width: 300 mm Spindle speed (12): 31.5 - 1400 rpm Motor power: 4 kW Quill stroke: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - 3-axis digital readout - Emergency stop push button - Multifix quick-change toolpost system - Machine light - Coolant system - Live centre

Condition: reconditioned (used), Kern Lead Screw and Feed Shaft Lathe Type / Model: D 20 A Cgjdpfxsy H Ecke Anfeu Condition: Refurbished Technical Data Centre height: 215 mm Centre distance: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speed range (24): 31.5 - 1400 rpm Motor power: 4 kW Quill stroke: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - 3-axis digital readout - Emergency stop button - Quick-change tool post, Multifix system - Machine light - Coolant system - Rotating centre

Condition: excellent (used), Year of construction: 2018, operating hours: 3,407 h, lifting height: 4,250 mm, fuel type: diesel, mast type: duplex, power: 47 kW (63.90 HP), motor manufacturer: Volkswagen, total height: 2,670 mm, total length: 2,320 mm, total width: 1,200 mm, color: other, Equipment: seat heater, Year of manufacture: 2018 Engine capacity: 1.896 cc Empty weight: 3.305 kg Engine type: Volkswagen 1,9 SDI (BXT) Lifting capacity: 2.000 kg CE mark: yes Technical condition: very good Visual appearance: very good Damages: none = Additional options and accessories = - 3rd hydr. circuit Codpfx Anjy S Uvkjfsgu - 4th Hydr. circuit - Pallet forks - Side shift - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIB / Tier IV interim General Country of production: Duitsland

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, overall weight: 865 kg, travel distance X-axis: 220 mm, travel distance Z-axis: 110 mm, spindle motor power: 5,300 W, welding current (max.): 500 A, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, EMCO EMCOMAT-20 D universal lathe in very good condition, with various tool cassettes, collets, and chuck jaws. Manufacturer: EMCO Model: EMCOMAT-20 D Year of manufacture: 2010 Condition: very good, fully functional Location: Graz (Austria) Highlights at a glance: - Center distance 1000 mm – ideal for longer workpieces - Stepless speed control up to 3000 rpm - Robust, induction-hardened machine bed - Hardened and ground guides & gears - Electromechanical spindle brake - Very stable design – 865 kg machine weight - Safety monitoring via electrical limit switches - With modern 3-axis digital display Technical data: - Center distance: 1000 mm - Center height: 200 mm - Swing over bed: 400 mm - Spindle bore: 50 mm - Speed: 40 to 3000 rpm - Spindle connection: DIN 55029 size 5 Cedeyxvqvjpfx Anfjgu - Drive power: 5.3 kW - Tailstock spindle diameter: 50 mm - Taper: MK3 - Travel: 120 mm - Dimensions (L x W x H): 1950 x 1060 x 1635 mm - Weight: approx. 865 kg Optional equipment: - Coolant system - 3-axis positioning display with 0.001 mm accuracy Scope of delivery: Machine including cabinet and various tools, tool cassettes, etc. (see pictures) Quality & Safety: The machine impresses with the typical EMCO quality "Made in Austria": Are you interested? Please contact us to arrange a viewing appointment or to receive a quote.

Condition: used, Year of construction: 1989, color: orange, overall weight: 12,000 kg, maximum load weight: 10,134 kg, empty load weight: 1,866 kg, loading space volume: 10 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 700 mm, mileage: 1,001 km, first registration: 01/1989, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors Body: Roll-off container with hinged doors, approx. 10m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Cgsdpfjvhn Ugsx Anfeu - .

Condition: ready for operation (used), machine/vehicle number: 17331, grinding area: 200 x 35 mm electrical connection: 380 V, 0,55 kW space needed: 530 x 400 x 1180 mm Codpfed Ixbcsx Anfjgu weight:

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Cjdpfxohx Elfo Anfogu Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). Cedpoiv H Eksfx Anfegu This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Condition: used, functionality: fully functional, Year of construction: 2024, Bomag Vibratory Plate BP 20/50 D — Year of manufacture 2024 Cedpfx Asy A E U Sonfogu Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 1,900 plus VAT | EXW Einbeck | Delivery upon request

Condition: excellent (used), Year of construction: 2020, operating hours: 5,672 h, lifting height: 4,860 mm, mast type: triplex, power: 29 kW (39.43 HP), motor manufacturer: Volkswagen, total height: 2,200 mm, total length: 2,600 mm, total width: 1,180 mm, color: other, Equipment: air conditioning, seat heater, Year of manufacture: 2020 Empty weight: 3.810 kg Lifting capacity: 2.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = Cgjdoy D D T Nspfx Anfeu - 3rd hydr. circuit - 4th Hydr. circuit - FOPS cabin protection - Side shift - Work lamp(s) = Remarks = Drivetrain Internship / Tier: Stage IV / Tier IV final General Country of production: Germany Condition CE type: CE Side shift and 4th valve, roof protection guard, air conditioning

Condition: used, Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 20 kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a stainless steel feeding hopper and bottom unloading. Under the mill outlet is installed a screw conveyor constructed as follows: stainless steel chamber and a galvanized carbon steel screw driven by a gearbox and electric motor with power of 0,75 kW, 3-phase, 50 Hz with an operating speed of 125 rpm. Whole thing is mounted on a frame made of carbon steel. Specifications: Cgedpjygvpaefx Anfju Horsepower: 20 kW Material Of Construction: Cast iron and carbon steel Type Of Mill: Pin mill

Condition: used, Year of construction: 2022, operating hours: 3,555 h, load capacity: 2,000 kg, lifting height: 3,850 mm, fuel type: diesel, construction height: 2,546 mm, gearing type: automatic, Equipment: head guard, Linde H20D Diesel Counterbalance Forklift ? 2.0t Lifting Capacity ? 3.85m Lift Height ? Overhead Guard ? Very Well Maintained Cedpfsyrkn Uex Anfogu For sale is a reliable Linde H20D diesel forklift with a lifting capacity of 2,000 kg. The unit impresses with its proven hydrostatic drive and high-quality build. The forklift is equipped with a standard mast (lifting height 3,850 mm) and 1,200 mm forks, making it ideal for warehouse, industrial, and logistics applications. Features: * LED work lights front and rear * BlueSpot warning system * Comfort seat, imitation leather * Roof, front, and rear windshields * Panoramic interior mirror * Hydrostatic drive * Height-adjustable steering column * Forks 1,200 mm If you have any questions, we are at your disposal at any time.

Condition: used, TECHNICAL DETAILS - Max. temperature : 950 [°C] - Max. inlet height : 10 [mm] - Heating distance : 1600 [mm] - Cooling length : 2600 [mm] - Conveyor belt speed : 0.4 - 3.2 [m/min] - Conveyor belt width : 150 [mm] - Nominal voltage : 400 [V] EQUIPMENT Cgjdpfsug U Tzox Anfsu - External cooling unit

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 2,480 h, mileage: 43,000 km, lifting height: 20,000 mm, TRUCK MOUNTED PLATFORMS SOCAGE 20D Speed Year 2021 Working height 20 m Horizontal outreach 9 m Basket capacity 225 kg Hours 2.480 km 43.000 Automatic stabilization Automatic arm closing Complete of all documents Cgsdpfx Anoyudtcsfsu

Condition: used, Year of construction: 2000, Overview This bottle washer from the German manufacturer Klinger was built in 2000. The washer is made entirely of stainless steel, has a Siemens S7 control, 2-fold heaters and surge pumps for high cleaning performance. Technical details Capacity: 9,600 bph;   20 bottles per row Scope of delivery bottle washer | Klinger | Euro Class-D 20/1/73 | 2000 water treatment plant | Hager + Elsässer | 2000 incl. cation and anion exchanger, incl. salt container, pre-filter and UV probe with a capacity of 5 m3/h and  The water treatment system was designed to operate the bottle washer and the RO system RO reverse osmosis plant | Hager + Elsässer | 2000  with full desalination capacity of 2.5 m3/h Cgedpfx Anetxd A Ssfju

Condition: used, machine/vehicle number: WSK00000001246641, axle configuration: 3 axles, first registration: 08/2009, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2009, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Disc brakes = More information = Tyre size: 385/65 Make axles: BPW Tyre profile: 40% Cgsdpfeyhb H Tsx Anfeu Brakes: disc brakes Suspension: air suspension

Condition: new, operating pressure: 2,000 bar, high-pressure hose length: 10,000 mm, fuel: diesel, overall weight: 243 kg, warranty duration: 24 months, temperature: 80 °C, TECHNICAL DATA OF THE KARCHER HDS 8/20 D WASHER: Model: HDS 8/20 D Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Drive: DIESEL engine Pressing capacity (l/h): 800 Working pressure (bar/MPa): 200 Maximum water temperature (°C): 80 Fuel consumption (kg/h): 5.9 Fuel tank (l): 30 Weight (kg): 243 Dimensions (length x width x height) (mm): 1130 x 910 x 920 EQUIPMENT OF THE KARCHER HDS 8/20 D WASHER: Pressure gun: Karcher Professional !EasyForce Advance High-pressure hose: Karcher Professional - Longlife series 10M, DN8, 315BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock. 25° flat stream nozzle. Flat high-pressure stream with high surface efficiency and good dirt loosening force. RELIABLE | DURABLE | ERGONOMIC Economical diesel engine - independence from external power sources. Compliant with the requirements of the EU STAGE V emission standard. Electric start. Comfortable handle for easy maneuvering of the device. Durable frame protecting the device from damage. Possibility of transport by crane, e.g. on a construction site. Safety valve on the high-pressure pump and water filter. The water filter protects the pump from impurities in the water. Thanks to the operating parameters of 200 bar and 800 l/h flow, the device will cope well in all conditions, even the most difficult ones. Large, puncture-resistant wheels. SDS reduces pressure pulsations in the high-pressure system of the device and thus extends the life of all pump elements on the high-pressure side. EASY!Force technology reduces the force needed to hold the gun trigger to zero. Cgodpsv Tafbjfx Anfou The device also has an EASY!Lock equipment mounting system that allows 5x faster equipment change than a traditional thread system. The device is completely new and factory-packed

Condition: used, Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm Cgjdpfxjdkf I Ts Anfsu -Dimensions: 234/89/H50 mm -Weight: 3 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Three phase transformer -Type: D 32/20 50/60 Hz 6000 VA Cgedpfjfitflex Anfou -Primary: 3x 400 V -Secondary I: 1x 110 V 6 A -Secondary II: 1x 230 V 6 A -Secondary III: 3x 18 V 10 A -Secondary IV: 3x 66 V 30 A -Dimensions: 420/175/H430 mm -Weight: 80 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: Greif, double grinding wheel type D 20/4 -Grinding discs: max. Ø 250 mm -Motor power: 0.37 kW -Speed: 1400 rpm -Operating voltage: 220/380 volts Cgedpfx Anev Hawqsfeu -Dimensions: 500/310/H315 mm -Weight: 40 kg

Condition: used, Ferwood Code: RU0001121 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Cgodju U D N Uspfx Anfsu