Used Dorst Mech. High-Performance Automatic Press (1046) for sale (47,805)

Condition: excellent (used), Year of construction: 2008, Haulick + Roos Year of manufacture: 2008 Pressing force: 2,500 kN Stroke rate: 180 strokes/min Stroke adjustment: 20-160 mm Ram adjustment: 150 mm Table surface: 1,950 x 1,000 mm Installation height: 450 mm Nedpfx Abez Ei Eho Uslg Includes Fecker strip feeding system.

Condition: refurbished (used), functionality: fully functional, pump pressure: 400 bar, This excellently maintained Agilent 1100 HPLC system is ready for immediate use and provides a reliable solution for both routine and advanced chromatographic analyses. Annual preventive maintenance has been performed by certified Agilent service engineers. The last maintenance was performed in July 2026, during which the system successfully passed the inspection (PASS). Configuration: Agilent 1100 Solvent Tray Agilent 1100 Vacuum Degasser G1379A Nsdpezza H Dsfx Ab Ujlg Agilent 1100 Binary Pump G1312A Agilent 1100 Standard Autosampler G1329A Agilent 1100 Thermostated Column Compartment G1316A Agilent 1100 Variable Wavelength Detector (VWD) G1314A 3-month warranty

Condition: reconditioned (used), Year of construction: 1996, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50USL - Tool loading area 1100mm L-R - Machine under refurbishment, with new controls, - Roll feed BBV or optionally servo feeder available Please contact us for a detailed quotation! Njdpezlqgisfx Ab Ujlg

Condition: used, Year of construction: 1980, pressure 25 t no. of strokes 1500 Hub/min Nedpsvu E Iqefx Ab Uslg total power requirement 20 kW

Condition: used, Year of construction: 1985, pressure 25 t no. of strokes 1500 Hub/min Nledpfx Aovu E I Dob Ueg total power requirement 20 kW

Condition: used, Year of construction: 1985, machine/vehicle number: 131 153, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Nledouqc Agspfx Ab Usg Weight of machine approx.: 6,8 ton Extended machine accessories

Condition: used, Year of construction: 1987, functionality: unexamined, pressing force: 20 t, stroke length: 38 mm, overall weight: 3,600 kg, BSTA 20 H press, with BBV 190/85 roll feed on left-hand side, Year of mfg. 1987 Adj. stroke 8 to 38 mm Nominal capacity 20 tons Max. tool loading width 420 mm For spare parts or overhaul/repairs. Sold in "as is" condition. Available immediately ex-stock. Nledpow S E Tlsfx Ab Ujg Please contact us for more information!

Condition: like new (used), Year of construction: 2021, High-performance industrial imager Manufacturer: DATALOGIC Model: AV500-258W Year of manufacture: 2021 Condition: used (lightly used) Nljdpjwbg Drsfx Ab Ueg FEATURES • 5 MP image sensor, 32 FPS • Patented dynamic or adjustable focus system for extended depth of field • Continuous, blink-free white illumination • Region-of-interest windowing for higher frame rates • Next-generation decoding algorithm for outstanding decoding performance with 1D, 2D, stacked, and postal symbologies • Gigabyte Ethernet and SyncNet high-speed connectivity • PackTrack feature for closer item spacing • Image storage in various formats from full resolution to highly compressed JPG • Datalogic's patented "Green Spot" technology for visual good confirmation • Dual laser targeting for easy installation • Browser-based e-GENIUS interface compatible with all operating systems and hardware platforms, including PCs and Tablets • Extremely industrial-grade: IP65 for harsh environments with operating temperatures from 0 to 50°C Communication Interfaces: 2 Ethernet TCP/IP, 2 serial ports, Internal communication interfaces System SyncNet technology Connection modes: Master/Slave, Ethernet point-to-point Programming method: e-GENIUS multilingual, browser-based, integrated HTML web server interface The AV500 reader sets a new optical standard for unattended data capture solutions with an industry-leading 5-megapixel CMOS sensor, 32 frames per second image capture, dynamic or adjustable focus, and various lens options. With its wide field of view and excellent depth of field thanks to various dynamic focus options, the AV500 barcode reader is the ideal choice for smart track logistics solutions, baggage handling systems, and smart distribution applications in retail.

Condition: used, Year of construction: 1994, operating hours: 28,000 h, functionality: fully functional, The Bruderer BSTA 80H is an 80-ton high-speed stamping press built for heavy-duty progressive-die production, fitted with a BBV 320/200 strip feeder and Unidor tool monitoring. In stock in Pforzheim, ready for inspection. Nominal force: 800 kN (80 tons) Tool monitoring: Unidor Nlodpfx Abozibtbo Uog Stroke rate: 100–1,000 spm Strip feeder: Bruderer BBV 320/200 Adjustable stroke: 16–63 mm Clamping plate area: 970 mm Main drive: 43 kW Power supply: 380 V / 50 Hz Ram area: 760 x 510 mm Table area: 950 x 910 mm Strip inlet height (adjustable): 80–180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: approx. 15,550 kg Operating hours (main drive): approx. 28,067 h More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication, Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm Nodpfx Aozrpq Tob Uelg

Condition: used, Year of construction: 1995, machine/vehicle number: 953003, Order No. 25072 Technical Specifications: - Drilling capacity in steel ST 60: 40 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 150 mm - Drill spindle speed: infinitely variable rpm Nedev Uy Npopfx Ab Uelg - Throat depth: 350 mm - Max. distance between drill spindle and table: 580 mm - Table with 2 T-slots: 600 x 450 mm - Height adjustable via gear rack and hand crank - Table tiltable left and right - Drive: 400 V / 3 kW - Space required: approx. W 700 x H 1950 x D 950 mm - Weight: approx. 650 kg - With: - Machine vise - Keyless drill chuck: 1-13 mm - Lighting

Condition: excellent (used), Year of construction: 1985, Cutting length 1030 mm Max. sheet thickness 2 mm Stroke rate approx. 67 / min Rear stop 500 mm Table width 230 mm Working height 905 mm, can be lowered to 755 mm Nodpefpa Ihofx Ab Uolg Motor power 3 kW Dimensions, machine L x W x H 1550 x 1300 (without support arms) x 1250 mm Weight 850 kg Accessories / Special features: • Rear, manually adjustable rack and pinion stop with measuring tape, length 500 mm • Safety cable at the front, electrically secured • 1 side stop on the right • 1 support arm • Gear brake motor • The current working height is 905 mm. This can be lowered by 150 mm to 755 mm, as the machine has been raised on its machine feet. • Manual central oil lubrication • Electric foot switch We have resharpened and readjusted both blades. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: Nlsdpfxju H Acyo Ab Ujg - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds - Stroke speeds 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Condition: used, Year of construction: 1995, operating hours: 42,000 h, functionality: fully functional, machine/vehicle number: 10317, The BSTA 50UL is a Bruderer high-speed precision stamping press rated at 500 kN (50 tons) nominal force, engineered for continuous progressive-die production at variable stroke rates from 100 to 1,120 strokes per minute. The press is equipped with a Bruderer BBV 202/120 strip feeder, delivering strip widths up to 203 mm and handling material thicknesses up to 2 mm. Adjustable stroke is set between 16 and 51 mm, with strip inlet height adjustable across a 50–140 mm range to accommodate varying tooling and material profiles. Nominal force: 500 kN (50 tons) Tool monitoring: Unidor Stroke rate: 100–1120 strokes per minute (variable) Strip feeder: Bruderer BBV 202/120 Adjustable stroke: 16–51 mm Mounting space / clamping plate: 760–940 mm Main drive: 22 kW Power supply: 400 V / 50 Hz Table area: 940 x 580 mm Strip inlet height (adjustable): 50–140 mm Nlsdpfx Abszibrqs Ujg Max. strip width: 203 mm Max. material thickness: 2 mm Machine dimensions: 3100 x 2700 x 1800 mm Weight: approx. 8,150 kg Operating hours: 42,416 h Sound-insulating cabin available on request More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on reqest

Condition: excellent (used), Year of construction: 2001, HELMERDING Press KDH 400/2600/2 Pressing force 4,000 kN Stroke rate 15-60 strokes/min Stroke adjustment 80-250 mm Slide adjustment 175 mm Installation height 550-800 mm Table area 2,500x1,600 mm Slide area 2,500x1,400 mm Pass-through hole in the press table 1,300x800 mm Weight 106,000 kg Nljdpfx Abjz Ek Anj Ueg Lorenz Strip Line EWH 600/150 Strip width 80-600 mm Strip thickness 0.6-6.0 mm Max. coil weight 7,500 kg

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates Nljdpfx Ajzuzw Dob Ueg consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, punching force: 25 t, Bruderer BSTA 250-75B with BBV 190/85H - B-Control, year of mfg. 2006 - Tool area 750mm - Adjustable stroke 13 to 38mm - complete documentation Nlodpfxszlqhmj Ab Ueg - Machine checked, in very good condition! contact us!

Condition: good (used), Year of construction: 1996, operating hours: 51,573 h, ram adjustment: 51 mm, table length: 510 mm, table width: 400 mm, input voltage: 400 V, Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 [kN] (20 [T]). Speed range: 100 - 1800 [spm]. Year of manufacture: 1996. Feed BBV 101/75 on the right-hand side. Nsdpfx Asq A Uahjb Uslg Max. strip width: 125 [mm]. Max. feed distance: 75 [mm]. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 51 [mm]. Dimensions of the clamping plate (clamping plate): 510 x 400 [mm]. Bed opening: 400 x 160 [mm]. Max. distance of the mold width between the columns: 410 [mm]. Max. strip passage width: 260 [mm].= Connected load: 36 [kVA]. Power 400 [V] 50 [Hz]. Control voltage: 24 [V]. Machine dimensions: H 2540 x W 1661 x D 855 [mm]. Machine weight: approx. 3100 [kg]. Control cabinet and control system. CABIN ON PHOTOS IS NOT INCLUDED (optional cost of cabin only 8.000 EUR) Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 Njdoyxy D Tjpfx Ab Uelg - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, stroke length: 38 mm, input voltage: 400 V, punching force: 25 t, Bruderer BSTA 25USL with BBV 190/85 roll feed, - year of mfg. 2000 - Tool area 750mm Njdpfx Abozlqhyo Uslg - Adjustable stroke 13 to 38mm - complete documentation - Soundproof cabin - Machine checked, in very good condition! contact us!

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed adjustable up to 25 m/min. -Option for fixed or rotating tunnel bars. -Deflector plates allow the hot air streams to be adjusted separately at the top and in the middle. -Bottom air flow can be activated separately. -The machine can be moved or locked in place using adjustable foot rollers. Nlodpfx Aoh U A I Reb Ueg

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. Nodst Hwz Nopfx Ab Uslg * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: excellent (used), Year of construction: 2022, Equipped with a leadscrew mechanism and safety device to prevent tool breakage. Program for single or continuous cycles. Electronically controlled motor braking during single cycles. Motor with pole-reversing capability. Doubled return speed. Spindle speeds are continuously adjustable. Oil circulation lubrication. Table adjustment from the front. Thread cutting capacity, M8 to M45 in E335. Threads per hour: 600. Normal drilling capacity: 50 mm. Thread depth: 150 mm. Nlodpfsy Sxq Eex Ab Uog Drilling depth: 200 mm. Overhang: 325 mm, table area: 650 × 500 mm, overall height: 2150 mm. Weight: 680 kg.

Condition: used, Year of construction: 1989, machine/vehicle number: 19216, Lg.no. 22614 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drill spindle holder MK 4 - Drill spindle stroke 180 mm - Drill spindle speed infinitely variable with reduction gear - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - throat depth 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height adjustable via rack and pinion with hand crank Nljdpfx Aot Etiysb Ujg - max. distance table - drilling spindle approx. 780 mm - max. distance machined base plate - drilling spindle approx. 1250 mm - Coolant device - Lighting system - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: new, round material Ø 100 - 230 mm square edge steel Ø 100 - 170 mm Saw Body 30 Grad Linear Schlitten sawing motor 22 kW hydraulic motor 5 kW total power requirement 34 kW Saw speed 30-120 rpm /min saw-blade dia. Ø630 x 3,4 x 2,8 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 7,5 x 2 x 1,2 m required space 3200 x 7600 mm GERD WOLFF GLS-230 High-performance circular saw Introducing the new generation of High-Performance Metal Circular Saws, seamlessly blending precision and efficiency with German quality. Our High-Performance Metal Circular Saw machines are setting the standard in metalworking thanks to their innovative technology, allowing for precise and effortless cutting of steel of any kind. From 10 millimeters to an impressive 250 millimeters in steel diameter, our machines cut with utmost accuracy within seconds. At the core of these machines are their automatic functionalities, coupled with an advanced ball screw spindle and an automatic material feeding system. This combination ensures not only maximum precision but also impressive speed. A Siemens motor and Siemens PLC screen guarantee reliable performance and easy control. Nodpfjymf Tzjx Ab Uolg Moreover, our High-Performance Metal Circular Saw machines feature a special system for quick and convenient blade changes. The hydraulic material tension provides secure fixation of the workpiece during the cutting process. Additionally, a programmable misting system is integrated to ensure optimal lubrication and cooling of the saw blade, extending the tool's lifespan. With our servo and driver technology, you have full control over your manufacturing processes, allowing you to optimize production and achieve the highest quality standards. Choose our High-Performance Metal Circular Saw machines and embrace the future of metalworking – precise, efficient, and reliable.