Used Ebm-Papst Kdp 117 Slk-P for sale (41,016)

Condition: new, Bosch Rexroth CML40.2-NP-330-NA-NNNN-NW MNR: R911170254-GC1 Indra Control serial number: 006619093, unused in opened original packaging, 100% functional, delivery as shown in photos. Hjdpfjx Et Ufjx Abhonp

Condition: ready for operation (used), Siemens 1PM4103-2LZ26-1DS1-Z motor SN: W4311732901001 without tachometer/encoder - Z = S07, used, minor signs of wear, 100% fully functional, delivery as shown in photos, Z see nameplate Hnsdpfx Abox Dv Iishsp

Condition: ready for operation (used), Indramat MDD093C-N-030-N2L-110PA0 / 248521 servo motor SN: MDD093-11709, used, in good condition, 100% functional, delivery as shown in the photos. Hodpfjxp T Htsx Abhenp

Condition: ready for operation (used), Rexroth VDP92.1DEN-G4-NN-S1 control panel, part number: R911170378-01, serial number: 005435818 (including two keys), used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hjdpfx Abskak Hcehenp

Condition: ready for operation (used), Siemens 6GF2005-0BC01 Videomat IV SN: SVP L2 117405, used, good condition, 100% functional Hjdpfx Aexagr Rjbhsnp

Condition: ready for operation (used), Indramat MDD093C-N-030-N2L-110PA1 / 248855 servomotor SN: MDD093-11715 / Brake 11 Nm DC 24V 0.5A, used, in good condition, 100% functional, delivery as per photos. Hnsdpjxp T Hyjfx Abhep

Condition: new, Rexroth CMP60.2-SP-304-FN-NNNN-NW control unit MNR: R911170645-GC1 SN, unused in opened original packaging, 100% functional, scope of delivery as per photos. Hnedpjx Dw Scefx Abhjp

Condition: ready for operation (used), Indramat MAC117E-0-ES-2-F/180-B-1/S001 permanent magnet motor, mounting hole spacing: 152 x 152 mm, drive shaft diameter: 28 mm, used, with normal signs of wear, 100% functional. ATTENTION: Please request the costs for packaging and shipping separately! Hnsdsi D Irpopfx Abhsp

Condition: ready for operation (used), Rexroth VPP40.1BIA-1G0NN-M1D-BN-NN-FW Panel PC MNR: R911170305-204 SN, used, normal signs of use, 100% functional, scope of delivery as per photos Hsdst D Smujpfx Abhjnp

Condition: ready for operation (used), Fanuc A06B-0229-B300 SN: C08XX3512 + A860-2000-T301 SN: 1179078 Pulsecoder, used, minor signs of wear, 100% fully functional, scope of delivery as per photos. Hnsdpfxjx Dt Efj Abhep

Condition: ready for operation (used), Euchner STP3D-4141A024MC2117 safety switch. 096780, serial number: 004322, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Hnodpfxelu Riho Abhop

Condition: new, Sieb & Meyer 0362141EF1005 Type: 86/9 S 30110180 frequency inverter SN: 1000349178, unused in opened original packaging, 100% functional, scope of delivery as per photos. Hodey Nr Apspfx Abhonp

Condition: ready for operation (used), Submersible pump Overall length: 1170 mm, immersion depth: 700 mm Manufacturer unknown, type plate is unfortunately not available, used, normal signs of use, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire for packing and shipping costs separately! Hodox Dwgaepfx Abhjnp

Condition: ready for operation (used), Heidenhain UM 117DW ID 689572-01 The costs include only the repair analysis of your component, which you can send to us. After inspecting your component, you will receive a quotation with the actual repair costs. If you approve the repair, the analysis costs will be waived. Your component will be completely overhauled as part of the repair and comes with a 3-month warranty from us. Hedpfx Asy Nrdyobhenp

Condition: ready for operation (used), The costs only include the repair analysis of your component, which you can send to us. After inspection of your component, you will receive a quotation with the actual repair costs. If you approve the repair, the analysis costs will be waived. During the repair, your component will be comprehensively overhauled and comes with a 3-month warranty from us. Hnedpfoy Nrd Hsx Abhsp

Condition: new, Siemens C8117-A202-A11-2 Sicomp SMP-E510-A1 switch module, E version and serial number as shown in the photo, unused in opened original packaging, 100% functional, delivery contents as per photos. Hjdpfx Aexahn Tjbhonp

Condition: ready for operation (used), Rexroth PSI63C0.779-L1-INCL MNR: R911174026 AA1 inverter SN: 7261402358650, used, in good condition, 100% functional, delivery scope as per photos Hsdpfx Absx Eubgjhenp

Condition: ready for operation (used), Rexroth VCH08.1-EAB-064ET-A1D-064-CS-E1-PW / R911170837 IndraControl handheld control unit, serial number as shown in the photo, used, minor signs of wear, 100% functional, scope of delivery as per photos. Hedpfx Aei Ec Awobhsnp

Condition: ready for operation (used), Sieb & Meyer Sinudyn SM Power Supply 26.36.2, used, minimal signs of wear, 100% functional. Hsdpfx Aoi Edaiobhsnp

Condition: excellent (used), Very good condition, precision holder from the renowned brand WNT, made in Germany. Equipped with Centro-P HPC16 bush, ensuring high runout accuracy and stable tool clamping. A solid carbide VHM end mill for precision machining is mounted on the holder. Total length A=100, SK40 mounting type (DIN 69871 AD). Premium-class equipment, ready for work on CNC machining centres. Hjdpfxew Rrzmo Abhsnp

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, Additional information Frame Steel welded construction made of fine-grain steel, hot-dip galvanized, flat platform without edge rim, slope of the loading area towards the rear axle by approx. 8° downwards. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with NIRO sheet metal at the bend as a rope guide - flush with the floor. For trucks with wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm Tow hitch Tow hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrical system with 7-pole socket Accessories/Modifications 2 holders for wheel chocks, aluminum side underrun protection, foldable - These are taken over from the truck! Steel underrun protection, quarter-shell fenders with mud flaps - These are taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock 1 holder for 3 pieces of gasoline canisters 1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, including locking mechanism, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing sleeves on the back Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front wall switched via parking lights with switch on the front wall outside on the driver's side, 1 LED work light, at the rear, with integrated reversing camera including color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage divider 24/12V, 1 7-pole 12V socket = adapter Floor Hnodpfx Absk Unitjhjp Mega Grip made of interlocking galvanized grating, steel grating 50/4 including with a mesh size of 50 mm. Top side with anti-slip interlocking, continuously laid over the entire main frame platform Tie-down eyes 12 pairs of tie-down eyes in the outer frame, freely pivotable - each 10 tons. 1 at the very front and the last one at the very rear. 1 tie-down eye at the very rear in the middle for attaching the winch cable 12 tie-down eyes recessed in the center of the floor, each 5 tons. Front wall Front wall made of steel sheet, height 1,500 mm. Fixed with corner pillars at the front wall height. Each 2 x 12 mounting brackets for lashing chains mounted on the left and right on the front wall Winch Electric winch, 24 volts, pulling force approx. 6,350 kg, mounted in the center on the front wall (recessed with loading bridge), operated with a wireless remote control, rope length min. 35 m x 9.5 mm, with rope window, with rope pressure plate, including overload protection, rope free-running clutch, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating manual Ramps Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also when loading with ramps), electro-hydraulically foldable and laterally adjustable - including electro-hydraulic pump unit. Ramp angle approx. 8° with lowered rear axle Ramp surface made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support le

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,100 kg, Additional Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without edge reinforcement, the loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with a stainless steel plate at the bend as a cable guide - flush with the floor. For trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm Trailer hitch Trailer hitch ball head D24.8:, trailer load 2,800 kg, incl. mounting and electrical system with 7-pole socket Accessories/Conversions 2 holders for wheel chocks, aluminum side impact protection, foldable - to be taken over from the truck! Steel under-run protection, quarter-shell mudguards with mud flaps - to be taken over from the truck! Storage box Hnjdpfx Abji Riytshep Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 1 bracket for 3 x petrol cans 1 stainless steel storage box, w=600/h=400/d=500 mm, with a polished door, incl. lockable, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing collars on the back (splash-proof according to technical possibility) Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front panel switched via parking lights with a switch on the front panel, outside on the front left, 1 LED work light, at the rear, with integrated rear view camera Incl. with color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage converter 24/12V, 1 7-pole 12V socket = adapter plug Floor Mega Grip made of interlocking, galvanized grating, steel grating 50/4 Incl. with a mesh size of 50 mm. Top side with anti-slip interlocking, running continuously over the entire main frame platform Tie-down rings 12 pairs of tie-down rings in the outer frame, freely pivotable - 10 tons each. 1 x at the very front and the last one at the very back. 1 tie-down ring at the very back in the middle for attaching the winch cable 12 tie-down rings recessed in the middle of the floor, 5 tons each Front panel Front panel made of steel sheet, height 1,500 mm. Fixed with corner pillars at the height of the front wall. 2 x 12 lifting brackets for tie-down chains, mounted on the left and right on the front panel Winch Electric winch, 24 volts, pulling force approx. 6350 kg, mounted in the middle on the front panel, operated with a remote control, cable length min. 35 m x 9.5 mm, with cable window, with cable pressure plate, incl. overload protection, cable free-running coupling, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating instructions Ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair, electro-hydraulically foldable and laterally movable - incl. electro-hydraulic pump unit. Ramp angle approx. 8° with the rear axle lowered Ramp support made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 lashing straps. Ramp tip offset (nose min. 150 mm) suitable for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support legs, foldable at the rear + length adjustable,

Condition: good (used), functionality: fully functional, load capacity: 500 kg, Welding turntable, L-manipulator, positioner, in excellent condition, includes additional clamping plate. Rotating and tilting (overhead), steplessly adjustable speed. Mechanical height adjustment from 800 mm to 1100 mm. Outreach 1000 mm. Overall height 1800 mm. Length 3000 mm. Width 1100 mm. Clamping plate diameter 1000 mm. Hnodpfxjylkn Is Abhjp

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Summa 1400 FME-p” production system Item for sale: 1 x Summa 1400 FME-p Condition: This listing is for a used device, which may show signs of wear (minor scratches or discoloration). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Hnjdozb Aktspfx Abhjp Before shipping or pickup, we’ll record a video of a functional test for you. For more information, you’re welcome to contact us directly.

Condition: excellent (used), Gluing line OBEL-P gluing length - up to 3 m gluing width - up to 200 mm Hnodpfx Asirm Rhebhjp The OBEL-P gluing line is a high-frequency (HF) press system designed primarily for applications in woodworking, particularly in the window and door industries. Known for its versatility, it can process materials such as window scantlings, laminated wood beams, and glue boards. OBEL-P’s HF gluing lines are manufactured with a range of configurations, from manual to fully automated setups that handle tasks like automatic loading, gluing, pressing, and stacking, maximizing efficiency and minimizing manual intervention. Key specifications for OBEL-P gluing lines include adjustable HF output ranging from 40 to 200 kW, rapid glue application speeds up to 300 meters per minute, and modular designs that allow for additional automation as needed. These lines can achieve high production capacities, with some systems producing up to 150 m³ of output per shift.