Used Erl Faceplate for sale (2,112)

Condition: used, power: 85 kW (115.57 HP), overall weight: 6,500 kg, operation weight: 6,500 kg, maximum load weight: 6 kg, Year of construction: 2024, operating hours: 682 h, maximum speed: 40 km/h, Operating hours: 682, Initial registration: 07.11.2024. Standard equipment / technical data: Maximum load capacity 3,300 kg, maximum lifting height 6,600 mm, maximum reach 3,500 mm, length to carriage 4,310 mm, width 2,100 mm, height 2,120 mm, total weight with load forks 6,500 kg, total weight without load forks 6,330 kg. Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled, power: 85 kW (115 hp), 2,300 rpm, Stage V, diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR). Hydrostatic drive: Pump electronically controlled with variable displacement, motor: variable motor, EPD TOP including optional automatic speed increase. Mineral hydraulic oil HVI 46. Transmission: 2 gears, electro-hydraulically controlled, Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h. Cabin: Enclosed cabin, split door, 360-degree all-round visibility, GRAMMER air-suspended seat with safety lap belt, ROPS/FOPS approved, heating, front, roof and rear window wipers, sun visor, 4x1 joystick, electronic with capacitive release including direction of travel switch. Telescopic boom: 2-piece with electronic end-of-stroke damping (Soft Stop). Carriage: quick-change system, type "ZM2", hydraulically controlled from the cabin. Steering: hydraulic steering, 3 steering modes: all-wheel drive, front-wheel drive, crab steering. Drive: permanent all-wheel drive. Axles: front axle fixed, rear axle oscillating. Braking system: servo-assisted disc brakes on all four drive axles, automatically acting parking brake when the engine is stopped. Hydraulic system: pump with variable displacement, type "LOAD SENSING", flow rate work hydraulics: 125 l/min, flow rate hydraulic fan: 46 l/min, total flow rate: 171 l/min, working pressure: 210 bar, flow-sharing control block. Electrical system: 12 V, battery with 100 Ah, alternator 120A, stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off. Tires: 400/70-20. Standard equipment: servo brake, hydraulic oil cooler, rear plate for mounting a trailer hitch, hydraulic reversing fan, radio preparation, work lights on the cabin (2 front, 2 rear), V2001 preparation for additional function on the boom head, 2 hydraulic connections on the boom head, load protection grid on the carriage, lighting for road travel, automatic battery disconnect switch, electrical connection cable in the boom, acoustic signal when reversing, boom cylinder support for securing. Optional equipment: EU approval as a tractor / agricultural tractor 40 km/h including trailer hitch, height adjustable, self-locking, 30/32 mm pin, including connection for trailer lighting, air conditioning, vibration damping on the boom (B.S.S.), LED rotating beacon on the cabin roof (approval is the customer's responsibility!), LED work lights on the cabin (2 front, 2 rear) instead of the standard halogen spotlights, 2 work lights at the end of the first arm (basic arm), rear hydraulic connection with separate control. Fgjdpfxozdmtpj Ap Doh

Condition: good (used), Crane block, crane hook, load hook, single hook, lower block -Manufacturer: Verlinde, Crane hook: Crane hook type FEM 3 m -Load capacity: 3.2 t -Dimensions: 600/280/135 mm -Weight: 30 kg Fgedpfx Aewpfppsp Doh

Condition: refurbished (used), Year of construction: 2013, measuring range X-axis: 650 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, repeat accuracy: 0.002 mm, year of last overhaul: 2026, Measuring Range X – axis 650 mm Y – axis 900 mm Z – axis 500 mm Accuracy acc. ISO 10360 E = [2,9 + 4L/1000]µm retrofiited 2026 (new drives, new probe, new electronic, new software and PC) incl.: Renishaw RTP20 (new) Renishaw MCR20 probe changer (+1 additional module) DEVA004 DCC controller Fgedjx N S D Hepfx Ap Doh Aberlink 3D software On Demand: Aberlink CAD offline programming/ CAD compare Inca Premium (full 3D incl offline and CAD compare) DEVA joystick (USB or with touchscreen) Insatllation and training

Condition: good (used), Motor control, controller, converter, stepper drive, stepper motor control, frequency converter Fodpfon Nbmwox Ap Degh -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

Condition: used, Inductive sensor, electronic sensor, proximity switch -Manufacturer: Pepperl Fuchs, inductive sensor 4 pieces Fgjdpfx Apjgk Dzie Doh -Type: NCB10-30GM60-ZO-V1 Part No. 335185 -Price: complete -Dimension box: 95/120/H45 mm -Weight: 0.6 kg

Condition: good (used), Inductive sensor, electronic sensor -Pepperl Fuchs Part No.: 203091 -Price: per piece - Quantity: 4 pieces Fgjdpfxsfh Smls Ap Dsh -Dimensions: 150/45/H50 mm -Weight: 0.2 kg/piece

Condition: used, Transport container winter service, for spreader, salt spreader, salt container, grit container, Fgedpfsf T Sn Dex Ap Djh -Filling device: for road salt, fertilizer, for hand spreader -Bank: made of stainless steel -Transport frame: made of galvanized steel tube -Transport dimensions: 1800/1400/H1265 mm -Weight: 250 kg

Condition: used, Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate, switch disconnector -Manufacturer: Merlin Gerin, switch disconnector type Selpact -Current strength: 1600 A Fodpfxefubw Sj Ap Djgh -Voltage: 660 V/50/60 Hz -Dimensions: 395/340/H435 mm -Weight. 54 kg

Condition: used, Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate, switch disconnector, circuit breaker, circuit breaker -Manufacturer: Merlin Gerin, circuit breaker type compact C630NI -Drive: 230 V/AC Fjdpfxofubxaj Ap Dsgh -Triggering: MX triggering via a relay or button with 24 VDC -Current strength: 630 A -Dimensions: 290/155/H250 mm -Weight: 10.4 kg

Condition: used, Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, tacho generator, incremental encoder -Manufacturer: Pepperl Fuchs, rotary encoder incremental encoder -Type: TRD-G30-FN2 Fjdpsq Awafjfx Ap Djgh -Shaft: Ø 10 x 20 mm -Dimension: 115/78/H78 mm -Weight: 0.6 kg

Condition: excellent (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module Fgsdohzvv Topfx Ap Deh -Manufacturer: Pepperl Fuchs AS-Interface-Sensormodul Ovp -Type: VBA-4E-G2-ZA -Number: 7x module available -Price per piece -Cardboard dimensions: 105/65/H50 mm -Weight: 0.1 kg/pcs

Condition: excellent (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module -Manufacturer: Pepperl Fuchs, AS-Interface sensor/actuator module Ovp -Type: VAA-4A-G4-E2 -Quantity: 1 module available Fjdpshzvwisfx Ap Dsgh -Cardboard dimensions: 105/65/H50 mm -Weight: 0.2 kg

Condition: excellent (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module -Manufacturer: Pepperl Fuchs, AS-Interface sensor/actuator module Ovp -Type: VAA-4EA-K3-ZE/E2 -Quantity: 1 module available Fgjdpfx Apshzvwmj Doh -Cardboard dimensions: 100/70/H65 mm -Weight: 0.1 kg

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module Fgodpfehzvw Hox Ap Doh -Manufacturer: Pepperl Fuchs, AS-Interface sensor/actuator module ovp -Type: VAA-2EA-G4-ZE/E2 -Number: 1x module available -Price per piece -Cardboard dimensions: 100/70/H65 mm -Weight: 0.2 kg/pc.

Condition: good (used), Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 Fjdpfx Aoi I Hdcop Djgh -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, Measuring Range X – axis 1200 mm Y – axis 2000 mm Z – axis 1000 mm Accuracy acc. ISO 10360 E = [2,6 + 4L/1000]µm DCC controller Renishaw UCC S5 JS box Renishaw MCU-5 (wireless on demand) Temperature sensor Renishaw Probe system Renishaw REVO 5-axis scanning probe Probe changer Renishaw (price REVO system new appx. € 80.000,--) Application software Inspect3D Inca V6 avzula version Fsdpfsdv I Abex Ap Dogh built 2014, retrofit 2017 with Revo

Condition: used, Stick electrodes 4.0 x 350 Fjded Emhajpfx Ap Djgh -Type: Overcord -Price: per package -Number: 6 packages available -Weight per package: 4.8 kg

Condition: used, Stick electrodes 4.0 x 350 -Type: Fincord S -Price: per package -Number: 6 packages available Fgodpfed I Al Ajx Ap Doh -Weight per package: 4.4 kg

Condition: used, wire electrode, welding wire, welding wire Fjdpfx Apsd N Apuj Djgh -Cored wire: Fluxofil 31 -Diameter: 1.6mm -Dimensions: O 300/100 mm -Weight complete: 15 kg

Condition: excellent (used), Year of construction: 2020, ACSYS Model: BARRACUDA® Custom Dual FL70S ACSYS Laser Processing System BARRACUDA® Custom Dual FL70S Fiber Laser – Industrial Laser System – Year of Manufacture 2020 For sale is a high-quality ACSYS laser processing system, model BARRACUDA Custom Dual FL70S, manufactured in Germany. The machine is in a very well-maintained condition and is a professional industrial system for precise laser marking, engraving, and material processing. The system is equipped with two air-cooled fiber lasers (2×70 W), making it ideal for series production, industrial marking, engraving, labeling, and processing of complex components. Fgodoyi Twgopfx Ap Djh Thanks to its stable granite axis construction and fully enclosed safety cabin, the machine operates with the highest precision, reliability, and safety (Laser Class 1). Perfect for use in industry, metalworking, automotive suppliers, toolmaking, electronics, nameplates, DataMatrix codes, barcodes, serial numbers, and much more. Capabilities: - High-precision laser engraving and laser marking on metal and various materials - Series marking, nameplates, QR / DataMatrix codes, logos, numbering - Processing large layouts without misalignment (Large Field Removal Option) - 3D component processing possible - Camera positioning system for precise workpiece alignment - Automated processes / industrial integration possible (PLC, network, USB) - Low-maintenance, air-cooled fiber lasers with long service life - Fully enclosed, safe industrial system (Laser Class 1) Features / Options: - Camera system LAS – Live Adjust System HD - Large Field Removal (LFR) – processing large fields without misalignment - Industrial PC control with ACSYS Software Suite - Network / USB / PLC connectivity - Automatic door & safety monitoring - Lighting & signal beacon - Air-conditioned control cabinet - Fume extraction and filtration system for laser fumes - Extraction and filter unit (ULT LAS 1500) - Max. airflow: 3,240 m³/h - Nominal airflow: 1,200 m³/h - Max. negative pressure: 3,450 Pa - Power consumption: approx. 2.2 kW - Weight: approx. 300 kg Technical Data: Machine - Manufacturer: ACSYS Lasertechnik GmbH (Made in Germany) - Model: BARRACUDA® Custom Dual FL70S - Year of manufacture: 04/2020 - Laser: 2 × Fiber laser, 70 watts each (air-cooled) - Wavelength: 1055 – 1070 nm - Processing area: approx. 570 × 570 mm - Travel path: - X: approx. 875 mm - Y: approx. 600 mm - Z: approx. 190 mm Electrical Data: - Connection: 3AC / N / PE 400 V - Frequency: 50 Hz - Power consumption: approx. 5.5 kW Dimensions & Weight: - Cabin width: approx. 2050 mm - Cabin height: approx. 2300 mm (with signal beacon approx. 2600 mm) - Cabin depth: approx. 2850 mm - Total machine weight: approx. 3,800 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 1966, Swivelling spindle: No Height adjustment: Handwheel Swivel adjustment: - Cutter jaw adjustment: manual Height display: Scale Swivel angle display: - Fence indicator: Scale Spindle diameter: 30 mm Speeds: 2800, 4500, 6000, 5600, 8000, 12000 rpm Fgodpfx Asxu Dhlop Deh Motor power: 4 / 5.5 kW Motor brake: Manual Extraction connection: 2 x 120 mm Machine length: 2000 mm Machine depth: 900 mm Weight: 700 kg

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Fedpfx Apolzizme Dogh

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Fjdpfx Aoy U Nqnop Djgh

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Fsdpjyiflmefx Ap Dsgh

Year of construction: 1991, condition: ready for operation (used), A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible. Fgedpfx Asw A R Spsp Dsh