Used Exeron 303 for sale (464)

Condition: used, mileage: 50 km, power: 103 kW (140.04 HP), first registration: 06/2024, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 2 axles, fuel: diesel, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total width: 2,040 mm, total height: 2,590 mm, Equipment: air conditioning, airbag, central locking, immobilizer system, power assisted steering, sliding door, soot filter, traction control, UG1 Driver Assistance System: Hill Start Assist, 7L6 Start/Stop system for engine, 9WT Car-Net App-Connect, 4UC Airbag for driver, U9B Multimedia interface 2 x USB (Type C) front, KH6 Climatic air conditioning (driver's cab), 1LA Disc brakes front 16" (diameter 303 mm), 1MM Steering wheel (3 spokes), 6DA Sun visors two folding and swiveling sideways, 6X3 Grab handle on the partition in the cargo/passenger compartment, 6XA Exterior mirrors adjustable from the outside, 8N4 Windshield wiper intermittent switch, 9Z0 Operating voltage 12 V, DN0 4-cyl. turbo diesel engine 2.0 L/103 kW (4V) TDI Common Rail base engine is: TS1/TR1/T29/T5N/TQ4/T4A, EL2 Prepared for online services, I8I Radio "Composition Colour" with 16.5 cm (6.5 inch) touch display, IP4 Electrical connection block and preparation for functional control unit, QY1 Consumption optimization package with stone chip protection, equivalent to 2D5, T3C 4-cylinder diesel engine 2.0L, assembly 04L.Y, 5EV Approval as a truck with an N1 approval (up to and including 3.5 t permissible total weight), K4A Panel van, B4B4 Candy White, R23 Prepared for We Connect and We Connect Plus or VW Connect and VW Connect Plus, 8RE 4 loudspeakers: 2 tweeters, 2 woofers, 41W 4 steel wheels 6.5 J x 16 with 1,050 kg load capacity, in silver, Q68 Tires 205/75 R 16 C 113/111, rolling resistance optimized, 8GU Alternator 140 A, 0Y1 Standard climate zones, 37707 Interior lights in the driver's cab: front reading light, 25072 Mobile Online Services App-Connect, ZI4 Audio system Composition Colour (radio / SD card interface / USB), 18211 LED turn signals integrated into exterior mirrors, 8ID Double headlights, 7C3 Entry handle on the rear pillar, rear right, 1AS Electric, We are available by telephone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! Further:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! Cjdpfxezivhyo Aptsrg -All information without guarantee ... more on our homepage

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door/Ramp combination, Side door Equipment: - Aluminum walls - Ramp/Door combination - Aerodynamic Polybug Net: €5,285.71 / Gross: €6,290.00 Article number: C30213301519.11 Technical data: • Brand: Debon • Model: Roadster C300 Alu • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 303 x 150 x 197 cm • External dimensions (L x W x H): 425 x 205 x 231 cm • Loading height of the floor: 35 cm • Permissible total weight: 1,300 kg • Tare weight: 460 kg • Payload: 840 kg • Chassis: Low loader (wheels next to the body) • Tires: 165R13C • Suspension: Pullman2 coil spring • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Aluminum side walls, double-walled and anodized • Wooden floor made of Finnish multiplex with screen-printed coating • Full-poly roof and front in color • Continuous internal height: approx. 184 cm • Continuous internal width: approx. 152 cm • Loading flap made of aluminum, lockable with a small padlock • Loading flap can be used as a flap/door system (i.e. can be used as a flap or door) • Tie-down eyes mounted on the floor • Interior light • Torsionally rigid chassis • Stable crossmembers for high point loads • PULLMAN2 suspension, single-wheel suspension with longitudinal arm, coil spring and shock absorber, lowered, with very low center of gravity and galvanized • 100 km/h with manufacturer's certificate • Reverse automatic • Knott inertia coupling and parking brake • Stable V-drawbar • Plastic mudguards • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Automatic support wheel in the center • Body only splash-proof. Special equipment included in the price: • Side door on the front right, lockable, 127x61cm (H x W) _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired features! _____ - Financing or leasing possible Codpfszy Ah Iex Apterg - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved -

Condition: used, Year of construction: 2008, Vertical panel saw Crodpfxszy N Etj Aptjg Manufacturer: Striebig Type: Control 6224 Year of manufacture: 2008 Technical data - Power (S1): 4.4 kW - Saw blade diameter: 290-303 mm - Saw speed: 4750 RPM Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: ready for operation (used), Various flat knitting machines with different gauges and Groz-Beckert needle sets are available. 1) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 2) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 3) Stoll CMS 303 TC, gauge: E12, nominal width: 1270mm, needle set: 12. 4) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 5) Stoll CMS 340 TC, gauge: E12, needle set: 12. 6) Stoll CMS 411, gauge: E10, needle set: 10. 7) Stoll CMS 422 TC, gauge: E12, needle set: 12. 8) Stoll CMS 422 TC, gauge: E12, needle set: 12. 9) Stoll CMS 422.6, gauge: E12, needle set: 10. 10) Stoll CMS 422.6, gauge: E12, needle set: 10. 11) Stoll CMS 422.6, gauge: E14. 12) Stoll CMS 422.6, gauge: E14. 13) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 12. 14) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 10. 15) Stoll CMS 430.6, gauge: E12. 16) Stoll CMS 922, gauge: E12, needle set: 12. 17) Stoll CMS 922, gauge: E12, needle set: 12. 18) Stoll CMS 933 HP, gauge: E14. 19) Stoll CMS 933 HP, gauge: E12-10, needle set: 12. 20) Stoll CMS 933 HP, gauge: E12-10, needle set: 10. 21) Stoll CMS 933 HP, gauge: E12-10, needle set: 10. 22) Stoll IBOM/b, gauge: E14, nominal width: 180mm. 23) Stoll IBOM/c, gauge: E14, nominal width: 200mm. Including 2 needle sets and various conversion kits Stoll, Groz-Beckert and Universal. Documentation available. An on-site inspection is possible. The machines are still in operation and are maintained and well-kept. Individual sale possible. Crsdpfjy Igb Dsx Apteg

Condition: used, Year of construction: 1999, pressure 130 t chamfer lenght 3550 mm distance between columns 3060 mm dayligth 510 mm Control Cybelec DNC 80 throat 320 mm stroke 250 mm work height max. 900 mm Cjdpfevxwqfex Aptsrg weight of the machine ca. 12000 kg dimensions of the machine ca. 4,05x2,1x2,85 m Control Cybelec DNC 80 Y1;Y2;X;R axis Die shift with hand wheel 4 stop fingers hydraulic stamp clamping WILA hydraulic die clamping System Amada 2 pcs. support arms saftey 2-hand / foot operation Various stamps and matrices

Condition: used, Year of construction: 1984, material width:350 mm coil weight:1 t material thickness:0,5 - 6 mm coil internal diameter:380 - 540 mm coil external diameter:1500 mm no. of straightening rolls:9 Cjdpfot Hmk Tsx Aptorg straightening roll diameter:30 mm number of draw-in rolls:2 weight of straightening machine:2 t dimensions straightener (WxDxH):2,0 x 2,0 x 1,9 mm weight of decoiler:1,3 t dimensions decoiler (WxDxH):1,7 x 1,5 x 1,6 m

Condition: good (used), functionality: fully functional, 8LSA44.E3030D000-0 Crsdpfjufxvkjx Aptog IN 2,8A - MN 4,6NM - NN3000MIN' - IP64 - I0 3,7A M0 6,0NM - UN400Vac Serial number: 75480235523

Condition: new, functionality: fully functional, Comparable with Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 320 t (also available in many other configurations!) Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Y-axis stroke 400 mm Open height 650 mm Throat depth 450 mm Clear gap between frames 2555 mm Machine length 3785 mm Machine width 2290 mm Width without support arms 1740 mm Overall height 3100 mm Table height 920 mm Motor power 22 kW Oil tank capacity 300 l Machine weight 14,450 kg (Specifications may vary depending on equipment) Csdpfxsuf Nr Ae Apterg Standard equipment: 3 CNC axes (Y1, Y2, X) Press beam double-guided, stable and precise Robust double-guided backgauge Backgauge fingers double-guided on linear rails Movable front arms with height adjustment Side and rear safety guards 60mm lower die adapter rail Manual upper tool clamping system (Promecam system) Foot switch with emergency stop 380 V, 50-60 Hz, 3 phase LED lighting Additional equipment: Delem DA 66t CNC control R-axis (backgauge) CNC controlled CNC-controlled crowning Fiessler Akas 2M laser safety device 2 additional backgauge fingers (total 4) 1 set of top and bottom tooling - Further processing lengths and capacities available upon request with appropriate accessories! -

Condition: new, bending length: 3100sheet thickness: 16upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Csdpfx Apsd Ab S Ijtorg Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 9.400.00 We have many references!

Condition: used, Salvage rough terrain forklift Br 30 Codpfxeyvtu Tj Aptsrg Bj 1985 Timekeeping Lifting capacity 3000kg Raise height 3.00 meters

Condition: new, working width: 1.500working lenght: 3.000precision +/-: 0,05load-up weight (max.): 1.250messurements (LxWxH): 8.100 x 2.200 x 2.560weight approx.: 7.900Laser performance: 3max. thickness of material St 37-42: 16at aluminium max. approx.: 5at stainless steel max. approx.: 5FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Crjdpfx Aporh Rpfstsg Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera Laser typeWhole coverCNC UnitCyp CutAutofocusAvailableWorking area1500*3000mmRepeatable positioning   accuracy±0.03 mm/mPosition Accuracy±0.05mm/mMaximum speed120 m/minMaximum acceleration1,2 GMax. Load Capacity (Each   Table)1.250 er source2.000 WSource typeHan’s resonatorTable change time15 sLaser cutting headRaycusauto focusPower supply380 V 50Hz (three-phase)Graphic Formatdwg / dxf / stpChillerAvailablemachine average hine dimensions2200x 8100x 2560 mm

Condition: used, maximum load weight: 2,300 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 06/2015, Ref. No.: B - 06 On behalf of customer Fliegl * TTS 30-30 * Low-bed trailer * Ramps * 2-axle * Permissible total weight 3000kg * Very good condition, little used Trade-in possible Financing starting at 3.99% Errors and prior sale excepted! The information in this advertisement is non-binding descriptions and does not constitute guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Stated features should be checked separately. All details in the ads are non-binding! Nationwide delivery within Germany available upon request. Opening hours: Monday to Thursday from 9:00 am to 5:00 pm Credpfx Apjxvf U Netjg Friday from 9:00 am to 2:00 pm and by appointment!

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Cedpfx Aowwaruoptsrg Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: used, This listing is for the Isotech IPS 303DD Power Supply The unit is in full working condition and is ready for immediate use Description For sale is a used Isotech IPS 303DD DC Bench Power Supply, a reliable and accurate unit ideal for electronics testing, lab work, or educational environments. This model features precise voltage and current control, dual digital displays, and fine/coarse adjustment knobs for both voltage and current, offering versatility and ease of use in any bench setup. Key Features Output Voltage: 0 – 30 V DC Output Current: 0 – 3 A Dual LED Display: Simultaneous voltage and current readout Adjustable coarse and fine controls Constant Voltage (CV) / Constant Current (CC) operation Cjdsxhfqhjpfx Aptsrg Overload and short circuit protection 4mm safety binding posts for secure connections Internal fan cooling for thermal management Ideal For Electronics hobbyists and repair professionals Engineering and science students Workshops, makerspaces, and test labs

Condition: used, functionality: fully functional, Year of construction: 2000, laser source manufacturer: Trumpf, laser source model: TLF 3000 turbo, laser power: 3,000 W, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 6 bar, Trumpf Maschinen Grüsch AG, laser cutting machine, TRUMATIC LC3030 Model: LC3030 Series: Trumatic Year of manufacture: 2000 General information: Crjdeyazrtepfx Aptsg Input voltage: 400V AC Frequency: 50Hz Connected load: 73kVA Control voltage: 24V DC Required protection: 3x125A Laser power: 3,000W Compressed air connection: 6 bar Nitrogen connection (N2): 30 bar Oxygen connection (O2): 20 bar Max. component size: 3,000 x 1,500 x 20 mm Accessories: Liftmaster Loading and unloading stations

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 28,459 h, machine/vehicle number: A0220A2141, controller model: Siemens Sinumerik 840 D, laser power: 4,000 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Maximum sheet thickness, mild steel: 20 mm Maximum sheet thickness, stainless steel: 15 mm Maximum sheet thickness, aluminium: 10 mm Laser power: 4 kW MACHINE DETAILS Control system: Siemens Sinumerik 840 D Laser type: TruFlow 4000 Laser power: 4 kW Type: CO2 Credpfxeyilfas Aptog Dimensions & weight Dimensions (L x W x H): 9,300 mm x 4,600 mm x 2,200 mm Weight: 12,000 kg Operating hours (as of January 2026) Beam-on hours: 28,459 h Laser-on hours: 51,970 h EQUIPMENT TruTops license (additional charges may apply for license transfer to Trumpf)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Horizontal glass convection tempering furnace . For max. glass sizes : 1500 x 3000 mm Glass thikness : 4 - 19 mm Voltage : 400 V 50 Hz Control voltage : 230 V V AC 24 Credjyw Hgrspfx Aptsg Power : Heating : 296 Kw Motors : 262 Kw Total : 558 Kw Current : Heating : 470 A Motors : 450 A Total : 920 A

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 11598, controller model: SIEMENS 840D, laser power: 2,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TRUMPF laser cutting system including LoadMaster! Submitting a bid requires collection by the deadline at the end of November! TECHNICAL DETAILS Axes X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Working area: 3,000 x 1,500 mm Laser and Power Credjxu Ihiopfx Apteg Laser output: 2,400 W Laser unit: TLF 2400 TURBO MACHINE DETAILS Control: SIEMENS 840D Electrical Data Mains connection: 400 V / 50 Hz Connected load: 71 kVA Control voltage: 24 V Main fuse: 3 × 125 A Compressed Air and Gas Connections Compressed air connection: 6 bar Nitrogen (N₂) connection: 30 bar Oxygen (O₂) connection: 20 bar Dimensions & Weight Dimensions (L x W x H): 9,800 x 5,300 x 2,000 mm Weight: 11,500 kg EQUIPMENT LoadMaster

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 144300 € 2727.27 € 320 to 3050 mm Y1 / Y2 / X und R Achse 365 mm 2600 mm 410 mm 630 mm hydraulisch 160 mm/s 10 mm/s 160 mm/s 650 mm 500 mm/s 250 mm 900 mm 104 mm 2 x 11 kW 4300 mm 1820 mm 3330 mm Cjdpjwiqphofx Apterg 16500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed optional equipment: Z1/Z2-axes CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: SC10431106004, overall weight: 184 kg, total length: 920 mm, total width: 523 mm, total height: 398 mm, volume flow: 300 m³/h, power: 6 kW (8.16 HP), type of cooling: air, The Rietschle V-VC303 vacuum pump is a robust device designed for various industrial applications. It has a weight of 184 kg, ensuring a stable and durable structure for reliable performance. The pump's dimensions are 920 mm in length, 523 mm in width, and 398 mm in height, enabling installation in confined spaces while maintaining high efficiency. With a power rating of 5.5 kW, the V-VC303 pump delivers an impressive flow rate of 300 m³/h. This capacity makes it an ideal choice for operations requiring a substantial and continuous vacuum. Its design and industrial-grade construction make it suitable for diverse environments, withstanding heavy-duty use. This is a used pump, meaning its purchase price is typically lower than that of a new unit while still delivering comparable performance if properly maintained. The Rietschle V-VC303 is therefore an excellent option for industrial operators looking to optimize their budget without compromising on performance. Crjdoxn Iu Nspfx Aptjg

Condition: good (used), functionality: fully functional, Year of construction: 2000, Max. processing size: 3000 x 1500 mm Crjdozb Uukopfx Aptjg Infeed width: 3000 mm Cutting capacity for steel: up to 20 mm, stainless steel: 10 mm Overall external dimensions: 9 x 5 x 2 m With Schmalz suction lifter up to 750 kg, year of manufacture 2018 With chain conveyor for waste transport With spare parts Disassembly must be carried out by the buyer.

Condition: excellent (used), Year of construction: 2013, operating hours: 46,500 h, functionality: fully functional, clamping force: 130 kN, screw diameter: 37 mm, The Negri Bossi will looked after did low hours . The machine have full service history year of manufacture 2013 the machine have one single hydraulic core and on air eject Cjdpfx Apezcx Tmetorg

Condition: used, Year of construction: 1995, offer consists of: Theisen & Bonitz booklet maker tb sprint 315 VP - collating unit type 315 VP (15 stations) 1.? ?Demonstration video showing all 15 compartments. 2.? ??DIN-A6 size supported. (Shown here, for example, in compartment 1) 3.? ??Missing-sheet detection works. 4.? ??Double-sheet detection works. 5. Speed adjustment works. So it’s fully functional!! - Automatic arrival and departure of the stations - Individual suction and blowing nozzles, individually adjustable - Controlled blowing and separation air - Missing sheet control at every station - Missing sheet repetition - Electromechanical double sheet control on the delivery Cedpfxszh D Ire Aptorg - Totalizer and area code counter - Shed sliding table for cross transport - Paper jam control via transport table - Transport table lighting - Digital speed display - Electrical connection - Vacuum connection for 303/304 QSM and 345 N - Display shaker for normal and folded displays - Pressure-vacuum pumps in a soundproof housing We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: good (used), Year of construction: 2019, operating hours: 11,778 h, load capacity: 1,400 kg, lifting height: 4,716 mm, fuel type: electric, mast type: triplex, construction height: 2,065 mm, empty load weight: 1,600 kg, mileage: 11,778 km, Electric triple mast stacker Brand: Still (Germany) Year of manufacture: 2019 Capacity: 1,400 kg Lifting height: 4,716 mm Mast height when lowered: 2,315 mm Features: FREELIFT 11,778 hours on the meter Crodpfjzxug Tox Aptjg Battery: LI-ION Maintenance-free with charger Automatic filling system Watch the video on YouTube.

Condition: good (used), Lot of parts / set of accessories for HAUSER S40, S35, S45 and S55 jig grinding machines. AMPHENOL connectors, EUCHNER safety switches, acoustic sensors, HEIDENHAIN control unit, belts, X- and W-axis bellows... Make an offer. Cjdpfxezxd Hpo Aptsrg Seel also: HAUSER , MOORE , EXERON , FEHLMANN , KERN ...