Used Fresia Snow Shovel for sale (552)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm Lodpomhhx Iefx Apysaa - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone Laedpfemhhyaox Apysa - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Laodpfx Apjd Tqaljyja - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles Laedpfxoh Ek Dao Apyoa - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Lodpjmhh Anjfx Apyoaa The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Laodpfefdkb Uex Apyea - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Ljdpfsfdkbhox Apyoaa - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm Laodpfjguk Dkox Apyea 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Ljdpfemhhf Sjx Apyjaa - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard Lodpjmhhy Nefx Apyjaa - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. Lsdpfsmidyfjx Apyoaa When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Lsdpfxjmkixwj Apyjaa - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Lajdpfxsmhh Dte Apyea When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Lodpfxjqt Dmyo Apyoaa The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone Ledpjguk Dvsfx Apyeaa - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, empty load weight: 7,460 kg, maximum load weight: 22,540 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, with axle load indicator, loading platform length 9,200 mm, loaded height approx. 900 mm, 20 lashing rings each rated at 10 t, 16 stake pockets on the outer frame, drive-on ramps (approx. 3,000 x 750 mm), climbing bar on the outside of the ramps and rear slope, laterally adjustable drive-on ramps, spring-assisted lifting for one-piece ramps, 70 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, contour marking according to regulations, spring-loaded parking brake, chassis fully hot-dip galvanized, incl. axle load indicators, Surcharge for: warning signs with lighting and beacon = Price: 400 €, widening to 3 m = Price: 500 €, hydraulic one-piece ramps and hydraulic ramp adjustment = Price: 1,000 €, excavator shovel recess = Price: 1,000 €, Also available with 8.20 m loading platform length + widening in stock. -- Subject to typing errors, mistakes, and changes, sample images --, More data at: !, More Details: ! Lodpsyy Uxuefx Apyeaa

Condition: used, mileage: 34,870 km, power: 165 kW (224.34 HP), first registration: 05/1988, fuel type: diesel, empty load weight: 7,340 kg, maximum load weight: 4,660 kg, overall weight: 12,000 kg, axle configuration: 4x4, wheelbase: 3,600 mm, brakes: engine braking, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 9, loading space length: 3,700 mm, loading space width: 2,400 mm, loading space height: 1,500 mm, Equipment: ABS, all wheel drive, cabin, fog lights, power assisted steering, * German vehicle * 1st hand * On Mercedes all-wheel drive chassis * Condition see photos * Original only 34,870 km * Ziegler built-in pump type TLF16/8 * 1,620 liter extinguishing water tank * Hose reel at the rear * Signal system and siren * Box body with shelves and drawers * Body dimensions: L=3,700 x W=2,400 x H=1,500 mm * Double cab with 9 seats * 5-speed manual gearbox * Engine brake * Longitudinal and transverse lock * Snow chains * Searchlight * Working lights * Tiltable crew cab * 2x Grammer comfort seat * Rear access ladder * Roof rails * ABS * Fog lights * Wheelbase: 3,600 mm * GVW: 12,000 kg * Unladen weight: 7,340 kg * When selling to tradesmen and for export (non-EU and EU), the German merchant rules apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at Lasdpfxsvhpyke Apysa We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2020, next inspection (TÜV): 01/2027, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Walking Floor semi-trailer K100 92 m³ 10 mm Floor, New MOT (TÜV) General Manufacturer: Knapen Trailers * Model/Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Gross permitted weight: 36,000 kg 202003-0071956-r_order-configur? * Max. axle load: 24,000 kg * Max. kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered walking floor semi-trailer * Axle version: fixed, fixed, fixed ----Dimensions * External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm * Coupling height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st–2nd axle: 1,310 mm * Axle spacing 2nd–3rd axle: 1,310 mm ----Axles & Running Gear * 3 x SAF 9 t Intradisc+ Integral CD off-road axles * All axles fixed * Disc brakes Ø 430 mm * 10-bolt wheel mount * Air suspension with standard control console (left in front of axles) * Lift axle, fully automatic via EBS * Including hill start assist (3x brakes) * Radio remote control for lift axle ----Tyres & Rims * Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels in total * No spare wheel ----Body * Closed sidewalls left and right * Sliding partition wall (min. ground clearance 100 mm) * Rear doors with external locking rods Lasdpfx Aoyrvt Aspysa * One locking rod per door * Top rail made of steel, swings out left and right * Platform at front bulkhead * Ladder at front bulkhead, left and right * Standard roof bows Ø 60.3 mm (4 pcs) * Bow spacing: 3 x approx. 4,100 mm * Tarpaulin 680 g/m² (RAL 9006 white aluminium) * Tarpaulin supports, 3-position (4 pcs) * Lashing straps (4 pcs) ----Floor / Walking Floor * Cargofloor system CF-500 SL-C * Electric control * Corrugated aluminium floorboards 10 mm (21 boards) * Fixed front wall * Stainless steel plate at rear under floor ----Attachments * JOST landing legs with compensating device * Plastic toolbox, left in front of axles (1000 x 500 x 500 mm) * 30 L water tank with soap dispenser * Closed side underrun protection * Swinging mudflaps * Anti-spray mat on 3rd axle * Long ladder with extendable rear step and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting * 6 x round LED tail lights (3-chamber) * LED fog and reverse lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulations * LED work lights at rear (radio remote controlled) * LED work lights near landing legs (radio remote controlled) * LED LCG-2 switch unit ----Hydraulics / Connections * ISO-N and ISO-S connectors + 15-pin electrical socket * Knapen Trailers V1 radio remote control * Hydraulic connections centred on front wall (vertical) * Pressure line left, return right * Additional hydraulic connections at landing legs * Brake connections present * Acoustic reverse warning (manually adjustable) ----Paintwork * Body in RAL 7011 iron grey * Wheel hubs in RAL 2008 light red-orange * Chassis and underside unpainted If you have any further questions, I am at your disposal.

Condition: used, mileage: 62,500 km, power: 130 kW (176.75 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 8,410 kg, maximum load weight: 1,090 kg, overall weight: 9,500 kg, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 3,080 mm, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, low noise, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, county Haus, 1x comfort seat, double passenger bench, seat heating, rear window, electric window left, electric window right, air conditioning, Telligent gearshift, differential lock, high beam headlights, work lights, rotating beacon, leaf spring suspension, trailer coupling (air + electrics), aluminum fuel tank, low-noise G1, winter service equipment, green environmental sticker. Wheelbase: 3,080 mm. Differential lock on front axle, dual-line trailer brake system, radiator protection grilles behind both radiators, auxiliary heater with engine pre-heating, fine dust and pollen filter, split-range gearbox with work group, torque converter clutch (WSK), VarioPower, pressure and return line at front for hydraulic circuits 3+4, dual-circuit hydraulic system with four chambers, snowplow relief function, acoustic reverse warning, rear-mounted PTO with flange. Lasdoxylpbjpfx Apysa The vehicle is sold with a flatbed body! Approx. 5,413 operating hours! Optional: Gmeiner salt spreader available for an additional EUR 6,500 and snow plow -9161- for an additional EUR 1,500! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: excellent (used), fuel type: electric, color: grey, first registration: 03/2026, Year of construction: 2026, Empty weight: 2.500 kg Carrying capacity: 1.000 kg GVW: 3.500 kg Dimensions (LxBxH): 367 x 125 x 238 cm Working width: 125 cm Technical condition: very good Damages: none Warranty: 24 months = Additional options and accessories = - Front window - Rotating beacon - Spotlight front - Spotlight rear = Remarks = WCM - L2110e WCM E-POWER mini shovel for sale, including bucket and pallet fork. Engine: YQP5.72AF.48P Engine power: 5000 Watts Battery: 72V 200Ah Standard tire size: 31×12.5-15 Drive: 4-wheel drive (4-matic) Additional functions: 1 Lifting capacity: 1000 kg Own weight: 2500 kg Speed: 12 km/h Hydraulic flow: 27 L/min Working pressure: 160 bar Fully electric shovel! Trade-in of your old machine is also possible. Controls: Servo joystick including electric forward/reverse switching. Quick hitch: Standard equipped with hydraulic quick coupler. Extra hydraulic function: Standard equipped with 2 additional hydraulic functions on the boom. Ljdpfx Aoyzfwdopyjaa Other: The machine is also equipped with the required road lighting and work lights. Dashboard with charging current meter, warning lights, and indicator lights. Dimensions L2110e: Length: 3672 mm (with bucket) Width: 1250 mm Wheelbase: 960 mm Height: 2380 mm Lifting height: 3120 mm Dump height: 1821 mm 2-year warranty on non-wear parts. CE certificate. Viewing by appointment. Showroom: Welgelegenweg 25, 3776 PR Stroe Phone number: Email:

Condition: new, functionality: fully functional, color: orange, empty load weight: 2,200 kg, brakes: other, gearing type: other, emission class: none, loading space length: 5,745 mm, loading space height: 2,821 mm, Year of construction: 2026, Equipment: additional headlights, hydraulics, TICAB Sand & Salt Spreader RPS 9000 (9 m³) - Winter Road Maintenance The TICAB RPS 9000 is a heavy-duty sand and salt spreader for winter road maintenance, snow and ice control, anti-icing, and de-icing operations. Ideal for highways, municipal streets, parking lots, airports, and industrial surfaces. • 9 m³ hopper for long, uninterrupted spreading Lasdpfox Uwp Esx Apyea • Hydraulic scraper-chain feed & disc drive for uniform application • Wide spreading width: 4–8 m • Optional cab-controlled proportional disc speed and autonomous engine • Quick mounting on trucks for versatile winter service Contact us for price, delivery, and technical details. Ensure safe roads this winter!

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: diesel, color: red, empty load weight: 1,300 kg, brakes: other, driver cabin: other, gearing type: other, suspension: other, Year of construction: 2026, Equipment: low noise, TICAB TI-CAR 225 | Compact Loader / Mini Wheel Loader for Farming & Municipal Works The TICAB TI-CAR 225 compact loader is a multi-purpose mini wheel loader for farming, landscaping, utilities, agriculture, and municipal services. Thanks to its compact size and articulated frame, it works efficiently in narrow spaces, urban areas, sidewalks, yards, and warehouses. Lsdpex Uqplefx Apysaa Compatible with bucket, pallet forks, sweeper, snow blade, auger, and other attachments, the TI-CAR 225 is a powerful skid steer alternative with low fuel consumption and easy operation. Contact us for price, delivery, and technical details.

Condition: new, functionality: fully functional, empty load weight: 583 kg, maximum load weight: 2,117 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,110 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Plateau 400/2 2.7T NEW VEHICLE Internal dimensions: 406 cm x 211 cm Gross weight: 2,700 kg Payload: 2,117 kg Ledpfxexp U A Ao Apyeaa Braked tandem trailer Overrun brake and handbrake by KNOTT 2 x 1,350 kg axles and brakes with automatic reverse function Low-profile chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail compartment Support load Multiple tie-down lashing points along the entire length Reinforced 10" C-grade tires with steel valve M+S (mud and snow) tires 13-pin connector Front marker lights Rear lamps with reversing light, fog light, and triangular reflectors Lamps and license plate holder are foldable Winch with brake and bracket 2 x wheel chocks 15 mm thick, durable, anti-slip phenolic plywood floor OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Full LED lighting - Anti-theft device - Swap steel track for aluminum track - Swap 10" tires for 13" tires - Wheel stops - Foldable rear support cranks - Anti-sway coupling - Side railing - 30 cm aluminum side panels - 30 cm aluminum extension side panels - 150 cm high tarpaulin - Full-width wheel stop Additional accessories available on request! Plus freight to Gera and vehicle registration certificate: €250 net Images are for illustration purposes and may show optional accessories at extra cost. Haven’t found the right trailer yet? We have 50–100 vehicles in stock, available immediately for pickup. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravans. We also offer a large selection of spare parts and accessories for trailers from various manufacturers. We also have a wide range of rental trailers available. Visit us online or stop by in person!

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 09/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, total width: 2,550 mm, Equipment: ABS, bioSTAR 91.3 cbm Basalt Grey Chassis Type: Moving Floor Kingpin Load (National, t): 12 Axle Load (National, t): 8 Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1200 Loading Width (mm): 2475 Chassis Series: 135 Gross Vehicle Weight (technically permitted): 39 = 12 + 9 + 9 + 9 Wheelbase (WB) Moving Floor Trailer (mm): 7850 Internal Height Front (mm) (IHF): 2641 Internal Height Rear (mm) (IHB): 2821 Loading Length (mm): 13513 Volume (m³): 91.3 Overall Width (mm): 2550 Overall Length (mm): 14000 Chassis Tyre Size: 385/65R22.5 Chassis Neck Height (mm): 217 Axles: JOST Brake Version: Disc Brakes Brake Type: JOST - DCA-T7 Offset (ET): 120 Option 1st Axle with Traction Aid Traction aid optimised with activation via push button in the truck (installation of button not included in scope of delivery) and by pressing the brake pedal three times Option 3rd Axle: Without Brake Pad Wear Indicator: Connected Tire Pressure Monitoring: Wabco TrailerPulse Air Suspension: ECAS with raise/lower valve Lowering of air suspension via Smartboard, as well as raise/lower valve Coupling Head Pneumatic: European palm coupling Wheels: Speedline Diamond Wheel Nut Caps: Chrome with STAS logo Landing Gear: Weweler steel gearbox landing legs, type Weweler, with compensating feet, single-sided operation, and 2 speed stages Underrun Protection Operation: Fixed underrun bar Lighting Manufacturer: Aspöck Lighting Type: EUROPOINT III – LED 2 pcs. LED reversing lights, rear, installed left and right on lamp bracket Work Lights (operated via switch): 2 pcs. LED reversing lights, front, left and right in direction of travel, mounted in the area of the landing gear Hydraulic Coupling: Rotary coupling Hydraulic Coupling – Position: Connection point at front wall (additionally with connection possibility at landing legs) Hydraulics positioning: pressure back, pressure left, return right (CON) Air connection in the toolbox Aluminum access ladder 3.80 m – right-hand side in direction of travel Broom and shovel holder, three holders each, mounted on chassis, left-hand side in direction of travel Moving Floor System: Brand Cargo Floor Air/electric console centrally mounted in direction of travel, with support bracket Lighting unit protection: one-piece splash guard Body Front wall angle (°): 90 Rear wall angle (°): 90 Rear wall type: Swing doors A-panel: Folding on the rear wall, mounted right in driving direction Lajdpfx Apoxdqbkjysa Cover plate between floor and front wall: Fixed aluminum plate and PVC strips Fifth Wheel Plate Type: Standard Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Wear plates: Rectangular 1500 x 1000 x 4 mm Floor system operation: Radio remote control Cargofloor Control Type: CF 500 SL-C - E-CONTROL Floor profile type: 8 mm ribbed Moving floor closure plate: Stainless steel With additional plastic guides below the floor profiles End cap reinforcement: Stainless steel shoes over the end caps of the floor profiles, with aluminum wear plate above the end caps Oil temperature sensor for moving floor system Residue-free discharge wall Rear wall: Aluminum Swing door version: split 1/2 to 1/2, with transverse door header Door wing opening: right door wing opens first (STAS manufacturer’s choice) Transverse door header: swivel version Door header material: Aluminum Rear door locking: 1x swivel bar per door half

Condition: used, mileage: 1,20,536 km, power: 90 kW (122.37 HP), first registration: 08/2020, fuel type: diesel, overall weight: 2,375 kg, next inspection (TÜV): 08/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M468 4 x VW CADDY WITH SHELVING SYSTEMS, AVAILABLE WITH IDENTICAL EQUIPMENT BUT DIFFERENT MILEAGES VW CADDY 2.0 TDI EURO 6d-TEMP KM: 120,536 FULL SERVICE HISTORY LAST INSPECTION WITH OIL CHANGE AT 120,308 KM ON 12.03.2025 DIGITAL VEHICLE HISTORY AVAILABLE. ALL INSPECTIONS WERE CARRIED OUT BY AN AUTHORIZED MANUFACTURER WORKSHOP. 1 OWNER 4MOTION (ALL-WHEEL DRIVE) AS-NEW M+S TYRES 2 SEATS - Cruise control - Speed limiter - Hill start assist - Brake assist - Multi-collision brake - Rear park assist (PDC) - Air conditioning - Start/stop automatic - Towbar TOWING CAPACITY UP TO 1,450 KG Cornering lights Fog lights LED daytime running lights Trendline trim Gas bottle transportation ventilation Sortimo wooden load floor with lashing rings Vehicle interior fittings by SORTIMO GLOBALSYSTEM With drawers and shelves: 7 drawers - 4 drawers, each 45 x 40 cm - 3 drawers, each 65 x 35 cm - 1 drawer, 45 x 65 cm 3 shelves - 1 shelf, 35 x 70 cm - 1 shelf, 45 x 35 cm - 1 shelf, 35 x 120 cm 6 screw boxes Broom and shovel holder Roof rack by SORTIMO TOPSYSTEM Fire extinguisher - Bluetooth hands-free kit - USB - AUX - SD card - Central locking with 2x remote keys - Electrically adjustable, heated exterior mirrors - Electric windows - Lumbar support - Right sliding door, glazed - Rear doors, glazed - Partition wall with window - Heated rear window - LED lighting for cab/load compartment - Storage compartment in cab Special equipment: - Composition Audio system (mono display, SD card slot, AUX-IN) - Exterior mirrors - Version: commercial vehicle - Connectivity package - Rear park assist - 2 remote keys - Rear wing doors with glazing - Heated rear window - High load compartment partition with window - Tyre pressure monitoring display - Heated washer jets Ledpfx Aowtliwjpyjaa - Fixed side window in loading/passenger compartment, front right - Robust seat upholstery - 12V socket in dashboard - Engine protection (underbody guard: engine and transmission) Additional equipment: - Third brake light - Passenger airbag - Driver’s airbag - Traction control (ASR) - BlueMotion Technology package - Left exterior mirror aspheric - Exterior mirrors electrically adjustable and heated - Right exterior mirror convex - Painted exterior mirrors - BlueMotion Technology - Brake assist - Roof rack preparation - Electronic differential lock - Hill start assist - Multi-collision brake - Fatigue detection system - Tinted laminated windscreen - Lockable, illuminated glove box - LED interior lights in cab - Dust and pollen filter - Body type: panel van - Lumbar support driver’s seat (left) - 3-spoke steering wheel - Steering column (steering wheel) manually adjustable - Height/length adjustment - Truck registration - Engine: 2.0 l - 90 kW TDI - Engine drag torque control (MSR) - Multifunction display Plus - Non-smoker package - Standard payload - Wheelbase: 3,006 mm - Tyre repair kit (Tire Mobility Set) - Low-emission according to Euro 6d-TEMP - Right sliding door - Drawer/storage compartment under front seats - SCR system (AdBlue technology) - Front side airbags with head airbag unit - Front seat belts with height-adjustable pretensioners - 6x15 steel wheels - Start/Stop