Used Garos Mdf 5600K for sale (182)

Condition: used, Year of construction: 2016, machine/vehicle number: 985-7, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 2,500 kg, FOR SALE — STETON P90C Hydraulic Hot Press Manufacturer: STETON s.r.l., Italy Model: P90C Year: 2016 Lasdpfx Afey Uibtouec Condition: Used, good working order Technical Specifications: Platen (pressing) area: 3000 × 1300 mm Press type: Hydraulic hot press Number of cylinders: 6 × Ø 70 mm Vwm Total pressing capacity: approx. 90–100 tons Vwm Cylinder stroke: 450 mm Frame: electro-welded steel profiles; balanced platen movement via racks, toothed wheels and guides DirectIndustry Heated platens with pipe coils for fluid circulation, mounted on machined surfaces with insulating panels to prevent heat loss; platens coated with aluminium sheet DirectIndustry Max. opening between platens: 450 mm DirectIndustry CE certified Typical applications: Veneering of chipboard and MDF panels, plywood laminating, hollow-core door production, furniture panel surfacing. Location: Estonia, EU. Export possible. Loading and transport by arrangement.

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Lajdegw Sxzopfx Afujc Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 1995, 3-HEAD WIDE BELT CALIBRATING/SANDING machine with 3 upper wide abrasive belts and calibrating/sanding rollers for sanding MDF, plywood, chipboard, and wood panels. Main technical data: Lodpfx Aozbk U Hefujac * Maximum working width mm 1180 * Maximum sanding height mm 160 * Minimum sanding height mm 3 * Height of working table: 900 * 1st unit: Rubberized sanding roller, 90 Shore – Motor HP 15, ROLLER DIAMETER: 250 MM * 2nd unit: Rubberized sanding roller, 60 Shore – Motor HP 15 (together with the 3rd roller), ROLLER DIAMETER: 250 MM * 3rd unit: Rubberized sanding roller, 30 Shore – (together with the 2nd roller), ROLLER DIAMETER: 250 MM * Brushing unit HP 2.2 * Variable feed speed from 5 to 25 m/min. * Feed motor HP 7.5 * Size of abrasive belts: 2620 x 1180 mm. * Oscillating blowers for belt cleaning. * Vacuum pump for working table HP 7.5 * Lifting motor HP 0.33 * Weight 3000 kg. Approximately 20 new sanding belts – various grits Used machine in very good condition, tested in our workshop before delivery.

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Ledoyuld Aopfx Afusac Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: used, Year of construction: 2006, drilling depth: 28 mm, Used Koch Drilling and Dowel Insertion Machine, Sprint-PTP-3 Technical data of the machine: Workpiece dimensions: Length Y: 110-800mm Width X: 20-1200mm Thickness Z: 14-60mm Material: Chipboard/MDF/Softwood Machine with 2 working areas. 2 workpieces with a maximum width of 600mm each can be loaded independently of each other. Working height 900mm - with horizontal drilling station - with glue application and dowel insertion station - with 1 oscillating conveyor - Drilling distance vertically Z above the support table: 35 mm - 1 stop rail on the left and right - Mechanical digital displays for height adjustment - Work cycle triggered by a manual button Koch Numeric with 1 NC axis (X) Positioning control with PC (Windows XP Professional PC) Lajdpfx Afozbunksusc Including widened machine frame for a maximum workpiece width of 1200mm 2 additional workpiece clamping cylinders Center stop for 4 working areas (removable for wide workpieces) Horizontal drilling station with 1 drilling spindle: Max. drilling depth 28mm Drill chuck Ø10mm Total drill length 70mm Drill speed 7200 rpm With dowel hole blow-out Glue application and dowel insertion station Dowel diameter: 8mm Dowel length 30mm Dowel projection 7-14 mm Set to 11mm Tolerance for wood dowels: --- Dowel length +/- 1 mm --- Dowel diameter +0.1/-0.2 mm With electronic glue monitoring (ELC) A monitoring device is installed before the glue valve, which measures the glue flow during each work cycle. If no glue is injected at a valve, the machine interrupts its work cycle and displays the corresponding glue valve in the control cabinet. Electrical values: Connection value: 400V, 50 Hz, 3 phases Voltage fluctuations max +6% to 10% Air connection 1 x R 1/2" internal thread 7 bar Extraction air velocity: approx. 30m/sec

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Lajdsx Svm Rjpfx Afusc 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood, automatic feed and return of the saw carriage, infinitely variable control of feed rate, saw blade height, and cutting lengths, pneumatic special pressure beam, front and rear support tables HP 520, Ljdpfjyzxkwjx Afueac longitudinal and cross cuts in a single operation, three-phase brake motor 6.8 HP / 5 kW and scorer unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm, good condition, machine ready for immediate use for further technical details, see pdf file (brochure) located in Neustadt/Weinstr. Transport available at additional cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 300 mm, number of axes: 3, number of slots in tool magazine: 12, actuation type: electric, total height: 2,275 mm, total length: 4,060 mm, total width: 3,315 mm, overall weight: 1,700 kg, Equipment: documentation/manual, The 2128 PANA ATC is a next-generation DANIBRUM CNC router, designed for modern workshops and manufacturing facilities seeking high productivity, consistent precision, and efficient automation in a single, fully integrated machine. Lodpfxeymcnco Afuoac Equipped with a 12-position automatic tool changer (ATC) and ISO30 tool holder system, the machine offers rapid tool changes and extended flexibility for processing a wide variety of materials: particle board, MDF, solid wood, plastics, Alucobond, and composites. The robust machine frame is supported by 25 mm linear guides, helical rack and pinion drives M1.25, and 750 W servo motors, ensuring fast, smooth movements and precise positioning across all axes. The 9 kW air-cooled electrospindle, with speeds up to 18,000 rpm, is controlled by an 11 kW inverter, allowing fine speed adjustment and stable performance under load. The result is a reliable, fast, and versatile CNC router, tailored to the current demands of furniture production and industrial processing.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 2,200 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 450 mm, overall weight: 2,500 kg, controller model: XINJE, feed length X-axis: 2,100 mm, feed length Y-axis: 2,800 mm, feed length Z-axis: 300 mm, spindle motor power: 9,000 W, rapid traverse Z-axis: 20 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 24,000 rpm, control type: NC control, Danibrum ROD Line CNC Router – Complete Industrial Solution for Precision Nesting The Danibrum ROD Line CNC Router is a professional-grade machine, designed for large factories and industrial manufacturers who demand efficiency, reliability, and high-precision machining. Built for nesting and panel cutting operations on chipboard, MDF, and solid wood, the ROD Line provides a robust, configurable platform ideal for automated production environments. Optimized Working Area for Industrial-Scale Production The standard working area of 2100 x 3000 mm allows for the processing of large panels without repositioning. The welded steel frame ensures structural rigidity, while HIWIN linear guides guarantee smooth, stable, and precise motion. Powerful Motor and Automatic Tool Change Equipped with a 9 kW spindle motor and a 12-position automatic tool changer, the ROD Line enables the seamless execution of complex tasks such as contour cutting, grooving, milling, and drilling — all in a single uninterrupted cycle. Industrial-Grade Speed and Accuracy The X-Y axis transmission features helical rack and pinion drives, while the Z axis employs a TBI ball screw for sub-0.01 mm repeatability. With a top travel speed of 80 m/min on X and Y, this router is engineered for high-output production cycles. Intuitive CNC Control and Broad Software Compatibility The machine is powered by the NC Studio control system, running on Windows OS, and is compatible with industry-standard CAM/CAD software such as Type3, ArtCAM, and Fusion360. The user interface is simple yet professional, supporting high-level production workflows. Optional Automation Features For automated production lines, the ROD Line can be optionally equipped with an automatic loading/unloading table — significantly reducing handling time and increasing operational throughput. Versatility and Custom Configuration The router offers customizable working dimensions, making it highly adaptable to various production layouts. It efficiently processes melamine-faced chipboard, MDF, solid wood, and composite materials. Key Advantages Heavy-duty industrial build for intensive operation High precision and excellent surface finish Automatic tool change system for efficiency Extensive software compatibility Optional integration with automated production lines The Danibrum ROD Line CNC Router is a critical step toward the digital transformation and industrial optimization of wood processing. It is the complete solution for workshops and factories aiming for high performance, reliability, and flexibility in line with modern market demands. Laedjwpttpspfx Afuoc

Year of construction: 2025, condition: new, functionality: fully functional, Improve the quality of your finish with the DAS LDX 1000 – 6 brush sander The DAS LDX 1000 – 6 automatic machine is designed for precise sanding and finishing of profiled wood or MDF elements, offering excellent results even for the most demanding aesthetic requirements. It is ideal for smoothing, fine sanding and final preparation of surfaces, thanks to the versatile and robust configuration of the 6 working units. Standard features and technical characteristics: Multiple working units: oscillating longitudinal drums, oscillating pads, transverse drums with Ø 280 mm and width 1000 mm, equipped with 20 helically mounted brushes. Working capacity: max. width 1000 mm, workpiece thickness max. 100 mm. Efficient sanding: disc rotation speed between 50 – 300 RPM (adjustable via frequency inverter). Sanding brushes: adjustable length between 20 – 70 mm, allowing detailed work on profiles with a depth of up to 8 mm. Ledpswhbtzsfx Afueac Touchscreen control panel: Ergonomically positioned, it allows independent control of each unit. The interface is intuitive, developed by DANIBRUM engineers for fast and efficient operation. Adherent conveyor belt: Equipped with ribbed rubber for constant advance, driven by a 1.1 kW motor. Includes automatic centering roller, height adjustment sensor and brushes for dust removal at the entrance and exit. Professional sliding system: Based on recirculating ball bearings, it offers precise, reliable and low-maintenance movement. Lubrication is done manually. Oscillation for sanding units: Ensures uniform finishing and prolongs the life of abrasive belts and sisal brushes. Efficient exhaust system: Each group has dedicated exhaust ports, connected to 8 Ø 100 mm outlets, keeping the work area clean and efficient. Fast side access: Large side openings allow easy brush changes and quick access for maintenance. Toothed belt transmission: Ensures constant speeds, stable transmission and low noise level during operation. Flexibility in finishing: The "fast release" system allows for quick changes of belts and brushes. The adaptable configuration is suitable for various styles and types of finishing. The DAS LDX 1000 – 6 machine is an efficient solution for manufacturers who want superior quality in the processing of profiled wood elements, with high productivity and impeccable finishing. Maximum working width 1000 mm Maximum working height 100 mm Longitudinal drum diameter (Ø) 220 mm Longitudinal drum drive motor power - oscillating 2 x 1.5 kW Longitudinal drum oscillation motor power 0.55 kW Oscillating pad diameter 200 mm Oscillating pad drive motor power 1.5 kW Pad oscillation motor power 0.18 kW Transverse drum diameter (Ø) 280 mm Transverse drum drive motor power 2 x 2.2 kW Advance motor power 1.1 kW Brush speed max. 1000 rpm Exhaust hood diameter (Ø) 4 x 100 mm Overall dimensions 3300 x 1600 mm Weight 1500 kg Technical support available in Romanian, English or German.

Year of construction: 2025, condition: new, functionality: fully functional, The DANIBRUM SIP series of brush sanders is a complete solution for the professional finishing of wood, MDF, milled or composite panels. Comprising the SIP610, SIP810, SIP813 and SIP1013 models, the range covers the varied requirements of processing workshops and medium and large industrial units SIP610 is an automatic brush sander, designed with state-of-the-art technology to perform finishing processes on flat and profiled surfaces with maximum precision. The equipment is ideal for rounding off sharp edges, cleaning the surface of fine dust, as well as preparing for painting or varnishing Whether used in a medium-sized workshop or in an industrial line, the SIP610 offers a constant output and a uniform quality of finish, with a minimum of manual interventions The high-quality brushes apply a controlled and adaptable pressure, which allows for the effective removal of imperfections without damaging the material Equipped with a PLC control system and a touch screen interface in Romanian, the SIP610 is easy to use, even for less experienced operators. Predefined programs allow rapid adaptation to different types of materials Thanks to SICK brand encoders and the electrical adjustment system of the working groups, extremely precise positioning can be achieved, with deviations of only 0.1 mm From solid wood to MDF or composite panels, the SIP610 can be successfully used for a variety of applications, offering consistent and superior results Individual electrical adjustment for each sanding group, which allows fine setting depending on the material Rotating discs with double direction of rotation and oscillation, for complete coverage of the workpiece Synchronized oscillation drums, which contribute to uniform contact with the workpiece surface Fast Release system for sanding discs The groups can be extracted laterally, making maintenance and brush changes easier Rubberized feed belt with increased grip, with milled profile for optimal traction Toothed belt transmission and oscillation reducer, which reduces vibrations and noise Linear guides with recirculating balls for smooth and precise movements Schneider electrical components and XINJE frequency converters, guaranteeing reliability and constant control Ergonomic swivel control panel, allowing intuitive operation from multiple positions LED light for increased visibility in the work area Built on a solid metal structure, the SIP610 is designed to withstand demanding industrial environments. The 4 vertical cylinders supporting each sanding group ensure evenly distributed pressure, which helps reduce wear Laedpfxowgw Tzj Afuec While the SIP610 is recommended for medium-sized workshops or industrial spaces with constant production flow, the SIP810, 813 and 1013 are designed for complex requirements or large work volumes The models in the SIP range are equipped with similar digital control technologies, efficient exhaust systems and industrial-quality components The SIP610 model, with automated functions, precision control and adaptability to various types of panels, is a reliable partner in any production environment. By expanding the range with the SIP810, SIP813 and SIP1013 models, the SIP series completely covers the needs of a modern wood industry Technical support in Romanian - English - German

Condition: new, Year of construction: 2021, machine/vehicle number: 218, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OSAI, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, controller model: OPENkey, spindle motor power: 7,400 W, number of spindles: 4, rapid traverse Z-axis: 38 m/min, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY €130,000!!! This price is valid only until May 28, 2026! Don’t miss this opportunity! We invite you to purchase a BRAND NEW and outstanding 5-AXIS MACHINING CENTER from the renowned manufacturer FANUM. This machining center is specifically designed for the processing of: - wood, - wood-based materials, - aluminum, - plastics, - composites, - materials of similar hardness (CORIAN, DIBOND, MDF, HPL, HIMAX, etc.). We are offering the latest SIGMA model, which comes exceptionally well-equipped. The machine is entirely new. Attached you will find its specification, describing functions, parameters, and production capabilities. FANUM is a manufacturer known for many years for reliability, precision, high performance, and fast processing speeds. The MACHINING CENTER we offer is BRAND NEW. Purchased from FANUM Sp. z o.o. in 2021, it was delivered to our facility directly by the manufacturer. The only use has been the commissioning performed by the FANUM service team—since then, the machine has not been used. Its condition can be described as completely NEW. Our model is equipped to a very high standard and includes virtually everything you might require. A new comparable device currently costs approximately EUR 282,350 net, which is PLN 1,200,000 net. We have direct contact with and support from the manufacturer, FANUM Sp. z o.o. We can also arrange another start-up inspection and demonstration at our location. If required, we can transport the machine to its new owner, and the FANUM team can install and commission the machine at the new site. The proposed price includes the machine itself, but we can also provide a quotation including transport, installation, and commissioning at the new location. In our opinion, the discount we offer—over 40% (more than €117,640 net, approximately PLN 500,000 net) off the cost of a new machine—makes this a particularly attractive opportunity for anyone looking to expand their machinery fleet or who would not have expected, within their machining center budget, to acquire a modern, new, and highly efficient machine. Laedpfx Afoyn Ri Reuoc General sales offer remarks: • Although the machine is NEW, it was manufactured in 2021, and we do not provide any guarantee or warranty; • The machine cannot be returned; • The price shown in the listing does not include VAT (23% will be added to the invoice for buyers in Poland); please check how the price is provided in the advertisement; • Single owner. * The price in EUR is based on the NBP exchange rate – 1 EUR = 4.25 PLN. Welcome to all MACHINESEEKER platform users. We are new to MACHINESEEKER. We are not a furniture, manufacturing, or machinery trading company. We own several properties in Poland and are active as a developer building homes and apartments in Warsaw (the capital of Poland). The machines offered are our property. We acquired them as settlements with tenants in the furniture industry. We know their history and condition, as described accurately in our listings. We maintain contact with the machine manufacturers, who can provide additional support – such as Homag, Otto Martin, OMC Machinery, and FANUM. Since we have no use for these machines, our prices are very attractive—especially as the machines are practically unused. We can assist with logistics and transport throughout Poland or the EU. Inspection prior to purchase is welcome. Kind regards.

Condition: good (used), Year of construction: 2001, and Edgebanding Machine IMA HKA The IMA HKA Hand Edgebanding Machine is a versatile device for manually applying edge strips or veneer strips to flat workpieces. It is suitable for materials such as chipboard, blockboard, and MDF. The machine can be used both manually and with a processing table, providing high flexibility in application. Year of manufacture: 2001. If you require vacuum clamps, they are available new and used in our shop. The HKA consists of two main components: 1. Handheld unit: Automatically feeds the edge strip, applies glue, and presses it onto the workpiece. 2. Processing table: Includes a vacuum pump, temperature regulator, and various control elements. The handheld unit can be suspended on a balancer to facilitate operation. Operating Methods: Ledpfjv N Nn Dsx Afusac • Guided workpiece: The handheld unit is mounted on the processing table, and the workpiece is manually moved. • Guided handheld unit: The workpiece is fixed with vacuum clamps, while the handheld unit is guided manually. Technical Data: • Working width: 90 mm • Edge thickness: 0.4 - 3 mm • Panel thickness: 16 - 45 mm • Edge strip feed: 20 - 50 mm • Power consumption: 2.6 kW • Vacuum pump capacity: 6 cbm/h • Minimum outer radius: Depending on the bending suitability of the edge material • Minimum inner radius: 150 mm, depending on material properties Optional Accessories: • Boom for attaching a balancer • Vacuum clamping table

Condition: excellent (used), Paoloni P 300 Panel Saw with Scorer | 3200mm Carriage, Italian, 790kg Description: For sale is a professional, classic panel saw from the renowned Italian manufacturer PAOLONI, model P 300. The machine features a very heavy, cast iron and steel construction (weighing a substantial 790 kg), which ensures excellent stability, geometric rigidity, and superior vibration damping during operation. This is a proven, mechanically reliable design without unnecessary, failure-prone electronics – ideal for use in artisanal carpentry workshops and for furniture production. ⚙️ TECHNICAL DATA FROM THE NAMEPLATE: Manufacturer: Paoloni (Fano - Italy) Model: P 300 Year of manufacture: 1997 Serial number: 0602 Supply voltage: 380 V (Three-phase) Frequency: 50 Hz Motor power (KW): 4.75 kW Current consumption: 11 A Machine weight: 790 kg 💎 MAIN FEATURES AND EQUIPMENT: Long Aluminum Panel Saw Carriage: Provides smooth, effortless feed and high cutting precision. The carriage length allows for easy cutting of full-size furniture panels (cutting length approx. 3200 mm). Scoring Unit: Essential for clean cutting of laminated, chipboard, and MDF panels – guarantees no chipping of the material on the underside. Precise Geometry Adjustment: Manual, reliable raising/lowering of the main saw blade and adjustment of the blade tilt angle (in the range of 0°–45°) using an ergonomic wheel with a dial indicator. Laodpfx Afoy Tzqkousc Stable Side Table: Structure mounted on a solid, telescopic support arm, equipped with a long transverse ruler with two stops for series cuts. Parallel Guide: Solid mounting on a thick, steel rod, ensuring repeatable dimensions on the right side of the blade. 📐 OPERATING PARAMETERS (Standard for the P 300 series): Cutting length: approx. 3200 mm Cutting width with the right guide: approx. 1150 mm Maximum main blade diameter: 300 mm - 350 mm Cutting height: up to approx. 100 - 115 mm (depending on the installed blade) 🛠️ TECHNICAL CONDITION: The machine is complete, in good visual and technical condition. Ready for immediate use in the workshop.

Condition: used, Year of construction: 2022, We are selling a CNC drilling center, SCM Morbidelli CX100, model year 2022, in excellent condition. This machine is designed for fast and precise processing of furniture components and is ideal for the production of cabinet furniture, kitchens, wardrobes, and other components made of chipboard or MDF. Key Data Manufacturer: SCM Group Model: Morbidelli CX100 Type: FO03 Lajdpfx Aey S U Dusfuec Year of Manufacture: 2022 Serial Number: AB00021843 Power Supply: 400 V / 3~ / 50 Hz Connected Load: 29 A Machine Weight: 1309 kg Made in Italy Machine Advantages High drilling speed and accuracy CNC control for efficient series production Compact design with a small footprint Suitable for modern furniture production Reliable Italian SCM manufacturing Condition The machine is regularly serviced and well-maintained. Inspection and operational testing are possible. For more information, technical specifications, or a quote, please contact us.

Condition: good (used), Year of construction: 2007, functionality: fully functional, The Italmeccanica MacPower 6TE/480/1600 is an industrial brushing machine / surface processing line for panels and sheet elements (e.g., MDF, chipboard, wood). The unit is designed for brushing, structuring, and finishing panel surfaces in woodworking and furniture manufacturing processes. Main features and parameters (typical for the MacPower series): • Working width: approx. 1600 mm • Multi-head brushing system (longitudinal and transverse brush groups) • Capable of processing both surfaces and panel edges • Designed for continuous operation in production lines • Robust industrial build, high efficiency, and consistent processing quality • Industrial 3-phase power supply • Typical applications: surface structuring, finishing of furniture panels, door components, wood-based boards The MecPower/MacPower series by Italmeccanica is used in industrial panel brushing lines. Machines are often equipped with multiple brush groups and a working width of 1600 mm, allowing the processing of large sheet elements. Italmeccanica MacPower 6TE/480/1600 Machine type: brushing / structure sanding machine for panels Manufacturer: Italmeccanica (Italy) 🔧 Working data Lsdpfeykzigjx Afujac • Working width: 1600 mm • Material pass-through height: approx. 130 mm (typical for the series) • Minimum piece length: approx. 400 mm • Number of working units: 6 • Top units: 2 • Side units: 3 • Longitudinal/transverse units: combination of longitudinal and transverse brushes • Edge processing: yes • Rollers/brushes: multizone horizontal and transverse brushes ⚡ Electrical data • Installed power: approx. 11–17 kW (depending on configuration) • Power supply: 3-phase 400 V, 50 Hz • Extraction system: dust extraction ports on the working units 📏 Dimensions and weight (typical for 1600 version) • Length: approx. 3300 mm • Width: approx. 2450 mm • Height: approx. 2250 mm • Weight: approx. 1500–3000 kg (depending on equipment)

Condition: new, Year of construction: 2026, 1520 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system Ledpfxein Eztj Afuoac - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 1020 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1000 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: Lsdein Ezdspfx Afujac - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 2040 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. Lsdein Uilopfx Afuoac CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 4100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: Lajdpoirmgfefx Afuec High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Condition: new, Year of construction: 2026, 1012 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1000 x 1200 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. Lasdpfx Aoin Ewzjfuec CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 2030 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. Ledpfsin Eqfjx Afuoac SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist

Condition: new, Year of construction: 2026, 1325 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table Laodpsin Eu Hefx Afusc

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035 color shades. Custom colors are available upon request and must be clarified in advance, which may result in additional charges. Welded table construction designed for professional use, mounted on a swiveling chassis cart, standing on 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be swiveled for space-saving storage and locked in place, reducing the required depth to only 800 mm. The table surface consists of a 22 mm thick HPL-MDF board, with a slotted vacuum distribution plate made from MDF covering the pressing area. The membrane frame is supported by 2 gas pressure springs mounted on the sides of the machine. A natural rubber membrane with 2 mm thickness, 780% elongation capability, and temperature resistance up to 70°C is installed, attached by a clamping system for efficient membrane changes. The all-around sealing of the press area is provided by a sealing profile installed in the membrane frame. Oil-circulated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks with a total capacity of 200 liters. Evacuation and ventilation of the press area is managed via a 3-way ball valve located at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, it is possible to book initial setup and a quick instruction by one of our staff members. If desired, we are happy to provide you with a separate offer for this service. Summary of key data: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elongation: 780%, very high recovery capability, suitable for temperatures up to 70°C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shut-off - Vacuum pump: 40 m³/h, oil lubricated - Max. vacuum: -0.99 bar - Max. pressing pressure up to 9.9 t/m² - Connected load: 1.40 kW (400 Volt) - Vacuum tank: 200 liters Lajdpoywpt Ijfx Afuec - 4 swivel castors with locks - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Installation dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH) - Installation dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH) Commodity code: 84659400 Net weight: 570 kg Gross weight: 660 kg Includes cover plate 3514 With a cover plate, you not only protect your membrane from UV radiation, but also convert your mobile-base vacuum press into a mobile worktable that can be used flexibly in your company. - Coated cover plate - Solid welded steel frame - Opening support by gas pressure springs Commodity code: 84669280 Net weight: 105 kg Gross weight: 105 kg The cover plate is only available in combination with a vacuum press.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We are offering this like-new LIYU IECHO TK4s cutting plotter / CNC milling machine, manufactured in 2022. Manufacturer: LIYU IECHO Model: TK4s Year of manufacture: 2022 Condition: like new Machine type: cutting plotter / CNC milling machine PLATINUM Q-CUT 3532 flatbed cutter with camera + 1.8 kW milling module Includes software, monitor, and PC. Lajdsy Tk R Hjpfx Afujc Used sparingly and in excellent condition. Working area of 3500 x 3200 mm Equipped with an automatic camera positioning system (CCD), regional vacuum system, AKI system for precise blade depth adjustment, and 2 motors on the X-axis for high accuracy and clean cutting results. Material thickness up to 45 mm Max. cutting speed 1500 mm/s Cutting accuracy ± 0.1 mm Formats: PLT, DXF, HPGL, PDF, EPS Vacuum pump: 7.5 kW 6-zone control system Two cutting heads, safety device, automatic tool adjustment Tools / Applications Kiss-cut, UCT, EOT, EOT3, PRT, DRT, V-CUT, CTT, 1.8 kW router, punching tool. Suitable for cardboard, DiBond, Forex, MDF, wood, acrylic, Plexiglas, vinyl, and many other materials. Cutting area: 3500 mm x 3200 mm Tools: Electric oscillating tool, tangent knife, creasing tool, kiss-cut tool, powerful rotary tool Camera system AKI system Cutting accuracy: 0.1 mm Power supply: 220 V 50 Hz / 380 V 50 Hz Automatic camera positioning system Disassembly, reassembly, and transportation costs are additional. A quote for disassembly, reassembly, and training is available from the manufacturer! If the distance is significant, inspection can also be done via live video. All information is provided without guarantee. Subject to change, errors, and omissions. If you have any questions or require further information, please feel free to send us a message or call us.