Used Geafol Transformer for sale (736)

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 200 kg, mast type: telescopic, lifting height: 19,800 mm, overall weight: 3,050 kg, transport length: 6,400 mm, transport width: 1,100 mm, transport height: 1,990 mm, fuel type: electric, Used OMME 2200 RBD Telescopic boom lift on tracked chassis with combined battery/diesel power Max. working height: 21.80 m Max. reach: 12.20 m Max. load capacity: 200 kg Climbing ability: 19 degrees Drive: Kubota diesel engine 18.8 hp and 24 V / 200 Ah battery (5 hours) Pgjdpfx Aljxhd Huowot Color: red Special features: non-marking, light-colored tracks, remote control, power transformer Features: - Detachable basket - Rotatable basket +/- 41 degrees - Variable outriggers - Basket size: 1.25 x 0.80 m - 230 V connection in the basket Technically fully functional, visually as shown UVV inspection upon handover Available from stock in Langenhagen. All information regarding the machine is without guarantee. Subject to typing errors, errors and prior sale.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Pedpozn Aymsfx Alwsgt Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: ready for operation (used), Year of construction: 1991, A Kallfass Pack-Jet 2000 film packaging machine with a Kallfass Universal 450N shrink tunnel is available. Max. film roll width: 760 mm, rated power: 9 kW, operating voltage: 380 V, control voltage: 24 V, main fuse: 3x 20 A, rated current: 18 A. With Kallfass Universal 450N shrink tunnel, rated power: 16.5 +1 kW. System length: approx. 9000 mm, width: 1400 mm. The transformer for the sealing stamp is defective. On-site inspection is possible. Pedpfx Alew Nykmewjgt

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible. Podpfexaphujx Alwsgt

Condition: good (used), Year of construction: 2016, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 19979, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 40 mm, feed length Y-axis: 40 mm, feed length Z-axis: 40 mm, nominal power (apparent): 75 kVA, torque: 191 Nm, controller manufacturer: Fanuc, controller model: G-Tech 31 iB, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 450 mm, workpiece diameter (max.): 850 mm, workpiece weight (max.): 500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 90 bar, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, tool length: 350 mm, tool diameter: 80 mm, tool weight: 10,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MX-850 Milling Machine – Year of Manufacture 2016 – Excellent Condition For sale is a reliable and high-performance MX-850 milling machine from 2016. The machine is in good, well-maintained condition and is fully operational. With approximately 14,000 operating hours, the machine has been regularly serviced and professionally used throughout. Particular mention should be made of the spindle, which runs exceptionally smoothly and is almost like new—ensuring precision and high machining quality. The MX-850 stands out for its robust construction, high accuracy, and versatile applications in daily production. It is ideal for a wide range of milling operations and perfectly suited for both single and series production. Pgodpfxjy Dd Exj Alwjt Equipment & Details: - Model: MX-850 - Year of manufacture: 2016 - Operating hours: approx. 14,000 h - Condition: good - Spindle: excellent run, nearly as new - Function: perfectly operational, ready for immediate use - Coolant system (Knoll) included - Chip conveyor included - Transformer included Scope of delivery note: The machine is sold without tools, holders, or LANG clamping system – only the machine itself and the above-mentioned peripherals are included. The machine has always been handled with care and regularly maintained. It is currently still in operation and can be inspected by appointment. If you are interested or have further questions, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning length: 503 mm, turning diameter: 190 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 135 mm, travel distance Z-axis: 503 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 40 m/min, type of input current: three-phase, torque: 75 Nm, overall weight: 6,200 kg, spindle nose: A2-5, CNC Lathe NAKAMURA-TOME WT100 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2012 CNC control: FANUC 31i-B Distance between spindles: 735 [mm] Max. cutting diameter: 190 [mm] Max. turning lenght: 503 [mm] Stroke Y axis: -31 / +31 [mm] Stroke Z1 axis: 503 [mm] Stroke X1 axis: 135 [mm] Stroke Z2 axis: 503 [mm] Stroke X2 axis: 135 [mm] Rapid traverse rate X1 axis: 16000 [mm/min] Rapid traverse rate X2 axis: 16000 [mm/min] Rapid traverse rate Z1 axis: 40000 [mm/min] Rapid traverse rate Z2 axis: 40000 [mm/min] Rapid traverse rate Y axis: 6000 [mm/min] Spindle nose: A2-5" Max. bar diameter in turning spindle: 42 [mm] Spindle throughbore: 56 [mm] Max. spindle speed: 6000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 11 [kW] Spindle torque: 75.4 [Nm] Counter spindle nose: A2-5" Counter spindle throughbore: 56 [mm] Counter spindle stroke: 525 [mm] Max. counter spindle speed: 6000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 11 [kW] Counter spindle torque: 75.4 [Nm] Max. tool holder cross-section: 20 x 20 [mm] Number of tool stations - Turret 1: 12 Number of tool stations driven - Turret 1: 12 Max. speed driven tools - Turret 1: 6000 [rpm] Podpfx Aljzhvwlswegt Number of tool stations - Turret 2: 12 Number of tool stations driven - Turret 2: 12 Max. speed driven tools - Turret 2: 6000 [rpm] Live tools power: 7.1 [kW] Total power required: 55.2 [kVA] Supply voltage: 400 [V] Weight: 6200 [Kg] INCLUDED EQUIPMENT: x1 IEMCA BOSS 545 E Type 32 L bar feeder (3 m bar capacity) x1 SMW-AUTOBLOK Mario Pinto PPBE-42 A5 collet chuck (S1 spindle) x1 Collet chuck (S2 spindle) x4 Radial driven tool holders x2 Axial driven tool holders x16 Static tool holders x1 Foot pedal control for chuck open/close x1 Parts catcher on upper turret with conveyor belt x1 Chip conveyor x1 Automatic lubrication system x1 Three-color status indicator lamp x1 Transformer x1 USB memory stick for parameter backup Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to turning and milling centers, machining centers and milling machines, including brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG and Mazak. CNC lathe, CNC turning center, CNC turning machine, machining center, CNC milling machine, CNC machining center, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Condition: ready for operation (used), Year of construction: 2024, spindle motor power: 22,000 W, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 105 mm, controller manufacturer: FANUC, controller model: i Series, number of axes: 4, This 4-axis DN SOLUTIONS PUMA 2600Y II was manufactured in 2024. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a main spindle speed of 4,000 rpm and a turret with 12 tool stations. If you are looking to get high-quality turn-mill capabilities, consider the DN SOLUTIONS PUMA 2600Y II machine we have for sale. Contact us for further details. • 15" color touchscreen display • iHMI Easy Operating System (EZI & Machining Cycle) • Absolute feedback system • CE certified • Metric configuration • Power supply: 3 Phase AC 380V / 50Hz • Number of axes: 4 (X, Z, Y, C) • Maximum turning diameter: 376 mm • Maximum turning length: 760 mm • Bar capacity: 81 mm • Main chuck size: 255 mm (10") • Hardened & ground hard jaws • Main spindle motor power: 22 / 15 kW • Built-in spindle design • C-axis functionality • Milling spindle power: 7.5 / 1.5 kW • Live tool speed: up to 10,000 rpm • Turret type: BMT65P • Number of tool stations: 12 • Automatic electric tool setter • Programmable live tailstock • MT5 live center • Coolant pump: 1.1 kW / 1.0 MPa / 20 L/min • Flood coolant for rotary tools • Coolant tank on right side • Thermal compensation structure • Chuck clamp confirmation • Bar feeder interface • Embedded Ethernet • Program storage: 5,120 m (2 MB) • 1,000 program capacity • 128 tool offset pairs • 8 work coordinate systems • Built-in transformer • Electrical line filter • 3-color signal tower (red / yellow / green) • Tool number display Additional equipment • Hinged belt chip conveyor (right side) • Belt-type oil skimmer • Parts catcher with collection box • Coolant gun Pedozlqpqopfx Alwsgt • Air gun

Condition: used, Year of construction: 2016, operating hours: 43,000 h, functionality: fully functional, System consisting of: 1 welding robot Qirox QRC 350-E incl. V7 Adv. controller, programming handheld device with 15 m cable, 24 V buffer, 2 GB flash drive, external cooling unit. Software expansion: Gas nozzle sensor, arc seam tracking, point editor, transformation, parameter interlocking, multi-layer technique, Manax Offline laser ICSE LD Welding equipment: Qineo Puls 600 (600A) with Premium control module, wire feeder, burner hose package, welding torch MRW 510 evo, Duo drive CDD 2, torch test gauge individual as well as with CDD, mechanical cleaning with wire cutter, external cleaning, pressure booster, wire spool equipment. Pgedpfxszmyfws Alwot Elevated track 20 kN, travel path 10 m, 2 track supports. 2 L manipulators WPS-TS 7.5 kN, rotation radius 1100 mm, load capacity 750 kg. 2 adjustable counter bearings, travel distance 3 m, manual. Connection control, 2 start pre-selection, partition walls and 2 sliding gates incl. end switch protection. 1 filter unit Tecau 6000 m³ extraction capacity, 1 extraction hood 3x2.5 m with curtains, suction slit channel. Documentation, CE declaration. The system was dismantled in June, inspected before dismantling, and regularly maintained by Cloos.

Condition: new, Year of construction: 2026, functionality: fully functional, table width: 400 mm, table length: 500 mm, working width: 500 mm, stack height: 400 mm, Equipment: CE marking, Professional Embroidery Machine Vision 2 Model Model: Vision 2 Heads: 2 Needles: 15 Applications: caps / finished garments / flat embroidery Embroidery Area: 400 x 500 mm Cap Embroidery Area: 270° Maximum Speed: 1200 RPM Motor: Servo Motor High Quality and Optimal Performance with Vision 2 Embroidery Machine The Vision 2 delivers excellent results thanks to its advanced technology, ensuring stable and quiet operation. Its embroidery precision is unmatched, making it ideal for creating intricate details on all types of fabrics. This model is built to last, offering a reliable investment for your business. A Smart Upgrade for Growing Businesses If you own a single-head machine, the Vision-2 is the perfect choice to take your production to the next level. With its two operational heads, you can double your productivity without the need to invest in two separate machines. This feature is particularly beneficial for handling small-batch orders, providing higher efficiency and quicker turnaround times. User-Friendly Operation and Advanced Technology with the Vision 2 Embroidery Machine Equipped with the INSTITCH 05 computer system, the Vision-2 is easy to operate even for less experienced users. Its intuitive interface allows you to set up and manage embroidery projects in just a few steps, increasing productivity without sacrificing quality. Thanks to its user-friendly design, anyone from professionals to beginners can use it successfully. Reliability Confirmed by Thousands of Users Chosen by over 5,000 industry professionals, the Vision-2 is a proven and trusted machine, valued by companies worldwide. Its versatility and potential to double profits make it an essential option for those looking to expand their embroidery business. Invest in the Vision 2 and see how you can transform your work with a machine that combines quality, innovation, and value. Pgodpfx Alexbplcowjt

Condition: used, Electric generator set with a capacity of 2000 KVA (SDMO – 16 cylinders) in very good condition, professionally dismantled, with low operating hours (it was actually used as a backup for a factory) + SREE 2000 KVA transformer + complete electrical cabinets and management system for this high-power unit. Price upon request. Pjdodlumyjpfx Alwsgt We also have an electric generator set with a capacity of 200 KVA.

Year of construction: 2026, condition: new, functionality: fully functional, Transforms excess corrugated cardboard into valuable packaging material! Resource-efficient. Safely packaged goods. Satisfied customers. Available in intake widths of 325 / 425 / 500 mm: TECHblade 325 Unit price, net: 1,900 euros Pgsdpfxezt R Tlo Alwjt TECHblade 425 Unit price, net: 2,130 euros TECHblade 500 Unit price, net: 2,480 euros

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning length: 145 mm, turning diameter: 168 mm, travel distance X-axis: 130 mm, travel distance Y-axis: 110 mm, controller model: FANUC 31i-TA, TECHNICAL DETAILS Turning diameter: 168 mm Turning length: 145 mm X-axis travel: 130 mm Z-axis travel: 110 mm Spindle speed: 45–6,000 rpm MACHINE DETAILS Control system: FANUC 31i-TA EQUIPMENT 2 × Portal clamping system 2 × Part chute for inspected parts 2 × 3-jaw chuck, SMW Autoblok, Type BHM 165, 152.4 mm (6 inches) SMW Autoblok hydraulic cylinder, Type SIN-S 100, left SMW Autoblok hydraulic cylinder, Type VNK 70/37, right Chip conveyor, discharging to the rear of the machine Air-controlled part clamping monitoring, right Part clamping monitoring, on both sides 4-position spindle orientation, on both sides Coolant injection in the chuck via Deublin rotary distributor, on both sides Automatic coolant pump with 200 l tank capacity 2 × 8-station turret Signal light with traffic light design Preparation for oil mist extraction Pgedozul Ruepfx Alwet Automatic machine shutdown Automatic central lubrication RS-232-C interface External transformer 10 × Boring bar holders 3 × Turning tool holders, right 3 × Turning tool holders, left Customer macro B Turning cycles

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Travel : 205 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] Pgjdpfx Aezyvq Nelwet COUNTER-SPINDLE - Max. bar diameter : 12 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 1 LOWER TURRET - Number of positions : 8 - Number of motorized positions : 8 - Live tools speed : 5750 [rpm] - Live tools power : 2.8 [kW] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 9 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2670 X 1375 [mm] - Machine height : 1660 [mm] - Machine weight : 3400 [kg] EQUIPMENT - CNC : Fanuc 16-T - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank * with high-pressure pump : 150 [bars] - Bar loader : FMB Turbo 3-26/4200"A" - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, Year of construction: 1988, x-travel 870 mm Pgjdpfx Aloxlkw Uewet y-travel 370 mm z-travel 400 mm table-size 310 x 1370 mm distance vertical spindle / table 50 - 450 mm feed - longitudinal/cross 20 - 800 mm/min 9 - 355 mm/min rapid traverse longitudinal and cross 3000 / 1375 mm/min spindle taper SK 50 spindle turning speed range 40 - 1750 U/min spindle speed: 12 Stück total power requirement 5,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,9 x 2,0 x 1,5 m - Powerful CNC universal milling machine - Includes Fanuc control system - Kneading milling head - Automatic feeds on X/Z/Y axes - Central lubrication system - Coolant system - Pivoting machine light - Splash guard tray - Separate transformer

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Pgodpfozrd Tvjx Alwjt

Condition: ready for operation (used), Year of construction: 2021, operating hours: 280 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, controller manufacturer: FANUC, number of axes: 4, This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information. Additional equipment • USB interface • Three-colour signal light • 1 set of soft jaws • CHIP CONVEYOR HS with lateral ejection • Transformer incl. cable • Manual compressed air gun • Bar feeder interface // Bar loader interface • Parts catcher main spindle • Parts unloader: Parts unloading system for the counter spindle incl. parts conveyor belt • Workpiece ejector / Workpiece drm: 230 mm / Workpiece X: 673 mm Machine Benefits Technical Machine Benefits • Linear (z) and flat-guided (x/y) 45 degree • Turning Ø: 230 mm // turning length: 673 mm • Chuck size both spindles: 8 inch (~210 mm) • Turret c-axis, 0. 001° // turret y-axis, +- 50 mm - upper turret • Driven tools: 5000 rpm, 5. 5 kw • 1 x axially driven tools // 1 x radial driven tools • Automatic tool probe • Coolant tank 270 litres // standard coolant nozzle • Internal cooling 30 bar • 30 bar coolant pump (60hz) Extra Information Strongly reduced interference contour Better workpiece accessibility Workpiece stabilization through axial pull against workpiece stop Chuck Type: SPANNTOP mini Chuck Model: Axzug Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 155.00 mm Frontal Diameter: 111.00 mm Maximum Outer Diameter: 165.00 mm Clamping Position: 65.00 mm Clamping Device Thread: M102x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A054288.0009C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M102x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 65.00 mm Maximum Actuation Force: 65.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-HSP Connection [of Pull Tube]: External Thread Thread Designation: M74x1.5 Thread Length: 40.00 mm Front Position Pull Tube: 57.50 mm Stroke of Clamping Cylinder: 17.50 mm Spindle Bore Diameter: 76.00 mm Pull Tube Inner Diameter: 66.00 mm SPANNTOP mini Axfix 65 KK6 Chuck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 huck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 138.00 mm Frontal Diameter: 119.00 mm Maximum Outer Diameter: 167.00 mm Clamping Position: 50.00 mm Clamping Device Thread: M94x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A071618.0004C Pgsdszvv Dzepfx Alwet Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M94x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 50.00 mm Maximum Actuation Force: 45.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-GSP

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: FANUC, controller model: 0i-MF Plus 10,4", total height: 3,438 mm, total length: 4,400 mm, total width: 3,900 mm, table width: 800 mm, table length: 1,700 mm, overall weight: 13,000 kg, spindle speed (max.): 1,200 rpm, coolant supply: 30 bar, distance table center to spindle nose: 920 mm, spindle motor power: 25,000 W, spindle nose: ISO 40 (DIN 69871), number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, New vertical machining centre equipped with a FANUC 0i-MF Plus control, 10.4" display, including Manual Guide I and AICC II. Table measuring 1,700 × 800 mm with a permissible load of 2,000 kg/m². Axis travels of 1,650 mm in X, 800 mm in Y and 800 mm in Z. Table-to-spindle-nose distance from 120 to 920 mm; spindle centre to column 882 mm. Cutting feed of 1 to 15 m/min, with rapid traverse rates of 36 m/min on the X and Y axes and 24 m/min on the Z axis. Direct-drive DDS spindle with ceramic bearings, 7/24 steep taper ISO 40 to DIN 69871, 12,000 rpm and a power rating of 15 to 25 kW. All three axes run on roller-type linear guideways (PMI, Taiwan) with preloaded ball screws. Swing-arm automatic tool changer with 24 stations, accepting tools up to 80 mm in diameter, 300 mm in length and 8 kg in weight. Through-spindle internal coolant supply at 30 bar with filtration unit, oil/coolant separator, hinged-belt chip conveyor combined with two screw-type chip augers, and a rear chip flushing system with coolant gun. Fully enclosed splash guarding with interlocked front door, spindle oil chiller, heat exchanger, automatic centralised lubrication and air-conditioned electrical cabinet. Rigid tapping cycle, eight open M-functions, data server with Ethernet connection and 2 GB memory card. Three-colour signal light, dustproof electrical system, spindle air seal and levelling bolts with pads. Machine supplied without counterweight. Power supply via a 400 V / 50 Hz three-phase transformer rated at 30 kVA; compressed air requirement 6 to 8 bar. Overall dimensions 4,400 × 3,900 × 3,438 mm, extending to 5,500 mm in length with the chip conveyor fitted. Machine weight 13,000 kg. CE certified. Psdpozw Ex Djfx Alwogt

Year of construction: 2023, condition: new, Field of application: Construction Attachment suited for: Loaders The wheel loader quick hitch transforms a wheel loader from a dedicated bucket or forks machine to a multi-tasking universal machine. They can be manufactured to suit Z Bar and IT type wheel loaders. Pedpfoph Rndox Alwegt We can manufacture for every brand and models, for detailed information please contact us.

Condition: used, mileage: 1,12,240 km, power: 78 kW (106.05 HP), first registration: 09/2011, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro4, suspension: other, number of seats: 2, total length: 6,783 mm, Year of construction: 2011, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, This Iveco Daily 35, first registered in 09/2011, is a practical and versatile companion for tradespeople, service technicians, and business owners. With a 2,287 cm³ engine displacement, a comfortable automatic transmission, and a mileage of 112,240 km, it provides a solid foundation for daily use and a wide range of commercial tasks. Podpfx Alezv U Skowogt The existing shelving system ensures organization and quick access to tools, materials, and spare parts. In addition, the reversing camera makes maneuvering easier and helps maintain an overview, even in tight spaces. This transforms the Daily into an efficient mobile workstation that is already prepared for many typical service and installation tasks. Get in, load up, and get started right away: whether it's customer service, installation, repair, or material transport – this Iveco Daily 35 offers versatile applications and a high level of practical value. The combination of automatic transmission, reversing camera, and shelving system makes it an attractive opportunity for anyone looking for a functional van for everyday work. For sale only to business owners (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, mileage: 2,12,701 km, power: 105 kW (142.76 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 2,454 kg, maximum load weight: 1,046 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, fuel consumption (urban): 9.5 l/100km, fuel consumption (extra-urban): 7.5 l/100km, fuel consumption (combined): 8.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 5,926 mm, Year of construction: 2016, construction height: 3,000 mm, Equipment: ABS, traction control, This Mercedes-Benz Sprinter 314, first registered in November 2016, offers an attractive combination of proven commercial vehicle quality and practical features. With a displacement of 2,143 cm³, a manual transmission, and a mileage of 212,701 km, it is ideally suited for tradespeople, fitters, service technicians, and business owners. Pedpfx Aszqvzvolwsgt The existing shelving system makes the Sprinter particularly interesting for daily work. Tools, materials, and spare parts can be stored neatly and are always readily available. This saves valuable time and transforms the cargo area into an efficient mobile workstation that can be flexibly adapted to various applications. Get in, load up, and get straight to work: Whether for customer service, assembly, repairs, or material transport – this Sprinter offers the necessary flexibility for everyday work. The attractive mileage, combined with the practical shelving system, makes it an interesting opportunity for anyone looking for a functional and immediately usable van. For sale only to businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sales excepted.

Condition: used, mileage: 2,03,139 km, power: 105 kW (142.76 HP), first registration: 10/2016, fuel type: diesel, empty load weight: 2,454 kg, maximum load weight: 1,046 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, next inspection (TÜV): 04/2027, fuel: diesel, fuel consumption (urban): 9.5 l/100km, fuel consumption (extra-urban): 7.5 l/100km, fuel consumption (combined): 8.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 5,926 mm, Year of construction: 2016, construction height: 3,000 mm, Equipment: ABS, traction control, This Mercedes-Benz Sprinter 314, first registered in 10/2016, is the ideal choice for tradespeople, technicians, and business owners looking for a practical and versatile van. With a 2,143 cm³ engine, manual transmission, and a mileage of 203,139 km, it offers a solid foundation for daily use. Particularly practical: the existing shelving system transforms the Sprinter into a well-organized mobile workspace. Tools, materials, and spare parts can be stored neatly and accessed quickly, saving time on every job and ensuring a more efficient workday. Get in, load up, and get started: this Sprinter combines the proven utility of the model series with a practical design. Whether for customer service, installation, or material transport, it is a reliable companion for many applications and an interesting opportunity for anyone looking for a functional van with a pre-installed shelving system. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted. Pedpfx Aszl Uihelwsgt

Condition: new, Year of construction: 1993, New control unit or relay/transformer unit. Pgodpfx Aljy Ugtmowet

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 2331 280, We sell a used Bolte Pro I-2200 stud welding unit with microprocessor control. MFG 2023, serial number: 2331 280 The trolley version of the PRO-I 2200, with two large, extremely robust wheels and a telescopic handle, is ideal for mobile use on construction sites. Podpoy Tqwyofx Alwjgt Technical features and advantages: Excellent welding quality – modern inverter technology ensures very precise control and high reproducibility of the welding process Very high arc stability – also in cases of short welding times and low welding currents Powerful – high welding current of 1050 A for a maximum welding diameter of 13 mm Fast welding sequences through innovative cooling concept Ideal for mobile use – considerably less weight than conventional stud welding units Robust construction for use in harsh environments Low energy consumption due to high efficiency Easy operation via a very robust rotary pressure switch Microprocessor control All functions and parameters are displayed on a large display (display contrast is adjustable) Welding program library Welding program storage – 59 Welding range: Ø 2-22 mm Welding current: 100-2100 A Welding method: studs with ceramic rings or shielding gas and short-cycle stud welding with or without shielding gas Welded materials: steel, stainless steel, aluminum Voltage: 320-495 V, 32 A, 50/60 Hz Power source: transformer/rectifier Welding time: 1-1500 ms, continuously adjustable Protection class: IP23 Dimensions (W x H x L) (mm): 550x850x650 mm Weight: 81 kg drawn arc stud welding gun GD 22 WMS is designed for welding shear connectors with large diameters (19 and 22 mm). Welding range Ø 3-22 mm Welding material steel, stainless steel Stud length 10-525 mm Welding method (acc. to DIN EN ISO 14555) stud welding with ceramic ferrule, stud welding with shielding gas Lift 0-6 mm, adjustable (raster: 0,3 mm) Welding cable: 2 m, 95 mm², outside Control cable plug: 12-pin Dimensions (WxHxL): 68x180x295 mm Weight (without cable): 2,45 kg The new drawn arc stud welding gun GD 22 is designed for welding shear connectors with large diameters (19 and 22 mm). The ample-dimensioned adjustable lift (adjustment range: 0-6 mm) ensures in combination with the adjustable hydraulic piston damper optimum welding results in this diameter field. Of course, the new guns are suitable for welding through metal deck. The gun also features a piston with linear ball track, an automatic length compensation system for different stud lengths and surface conditions as well as a robust, impact resistant housing for the hard work on the construction site. The high-grade outside welding cable (cable cross section 95 mm²) accommodates the high welding currents that are necessary for large stud diameters. Optionally, the new guns can be equipped with integrated travel measuring system. Using this the lift adjustment couldn`t be easier. Moreover, it enables a quality monitoring by measuring and recording of stud protrusion before the weld as well as stud travel (lift, immersion depth, immersion speed and short-circuit time) during the weld. Price 8.600 Euro + VAT, negotiable, FCA Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, functionality: fully functional, Year of construction: 2016, consisting of: - Laser welding head in aluminum case Pgodozl Rycjpfx Alwst - Coaxial extension - Gas pressure regulator for welding gas supply - Operating manual - Aluminum carrying case 5300_2 - WSweld Starter Kit Starter Kit WSweld Consisting of: 3 x Ring gap nozzle 1 x Focusing mirror 1 x Deflection mirror 1 x ZnSe window Laser welding head TC08 Replacing the cutting head with the WSweld laser welding head TC08 transforms a flatbed machine into a laser welding system. Deep and heat-conduction welding combined in one optical system Active cooling of all optical elements Coaxial welding gas supply for perfect laser welds Cross-jet prevents contamination of the optics Active collision detection The WSweld laser welding head TC08 is compatible with the following machine types: TRUMPF TruLaser 3030 classic TRUMPF TruLaser 5030 classic TRUMPF Trumatic L2530 TRUMPF Trumatic L3030 TRUMPF Trumatic L3040 TRUMPF Trumatic L3050 9 units available. 📞 Please contact us for more information or a non-binding quote. Subject to prior sale, changes and errors!

Condition: ready for operation (used), Year of construction: 2003, A sawmill is for sale. The Linck line is equipped with new automation from the Finnish company OT-Laite, manufactured in 2016. The Linck line speed is 100-120 m/min. It is operated by a single operator. Linck EV45 infeed turning device Chipper canter 1 Linck VM 50 Chipper canter 2 Linck VM 50 Scaner before profiling Lisker Profiscan / Seecon / ProfiTC. automation is made 2016. There is a room with all the necessary sharpening equipment Profiler group 1 Linck VPF340 , for 2 + 2 side boards Linck side board saw/ circular saw. 4 spindle Mechanisation for the removal of side boards Profiler group 2 Linck VPF 340 , for 2 + 2 side boards Linck resaw, max. cutting height 285 mm Transport to timber sorting Capacity: 400 m³ of sawn timber in 8 hours. line is 500 v and including transformer Podpfxjxg Ubys Alwogt