Used Grässlin Q Frwu for sale (1,918)

Condition: good (used), Year of construction: 2002, DC motor, motor, electric motor -Volt: 48 V -Speed: 2000 rpm Kjdpst Apmvefx Afuolu -Power: 2 kW -Design: B3 -Quantity: 2 pieces available Price: per piece

Condition: good (used), Compressed air filter, fine filter -Connection: 2" inch -Number: 3 filters available Price: per piece Kjdpfx Aeb A Ni Eofuolu

Year of construction: 1988, condition: used, table diameter 400 mm table load 0,126 t table height 100 mm Kjdpfoipyx Nsx Afujlu weight 126 kg Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. Kljdevcnpajpfx Afuju In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2011, condition: ready for operation (used), Max. working length: 2000mm, compressed air supply: 6bar, connected load: 1200W, the machine was hardly used. Kodpfx Afjlc N Speuolu

Condition: like new (used), Year of construction: 2024, functionality: fully functional, warranty duration: 12 months, total height: 83 mm, type of input current: AC, total width: 340 mm, total length: 240 mm, overall weight: 4 kg, Equipment: documentation/manual, For sale is a ZEISS ATOS Q 8M, a high-precision optical 3D scanner designed for demanding measurement and inspection applications. Ideal for precise 3D measurements in industrial and research settings. Quick setup and easy operation. Condition: Lightly used, primarily for trade shows, exhibitions, and training purposes. Scope of delivery: - ZEISS ATOS Q 8M scanner with MV500 - Original accessories as per standard configuration - Power supplies and cables - 10 m fiber optic cable - Includes tripod - Transport case included - Laptop included - Operating system: Windows 10 - ZEISS INSPECT OPTICAL 3D ZEISS INSPECT OPTICAL 3D Free: - Open and edit new and existing projects - Import of point clouds, polygon meshes - Create, edit, and process polygon meshes - Element construction: standard geometries, points, sections, curves, surfaces, dimensions - Import of standard CAD formats: IGES, VDA, STEP, JT Open, STL, PLY Kledpfx Aew Nx D Eofueu - Application of common alignment methods - CAD comparison with color-coded deviation visualization - Dimensional and GD&T evaluations according to ISO GPS and ASME Y14.5 - Reporting module Note: This device has only been used for demonstration, training, and presentation purposes, so some signs of use are visible. 3D acceptance certificate is available. In addition, when purchasing the ATOS Q, we would also consider trading in older GOM systems.

Condition: used, Year of construction: 2023,

Condition: used, Year of construction: 2023, - Parallel guidance - Multi-coupler QC4 (QCS) - 3rd function - SoftDrive - / attachment aid / Klsdpfx Ast A Tz Refuju

Condition: used, Year of construction: 2023,

Condition: refurbished (used), overall weight: 5,000 kg, Dimensions : 1,600 x 5,000/2, double decker complete with springs, spring brackets, base frame 11 kW electric motor and motor console, cardan drive, oil level lubrication Kljdpfeq Ttnysx Afueu workshop overhauled

Year of construction: 2022, condition: like new (used), Millipore Milli-Q ultrapure water system IQ 7000. Without cartridges. With MilliQ Q-Pod. Unused. Includes functional warranty. Kedpewutuqofx Afujlu

Condition: used, This listing is for the Qiagen Rotor-Gene Q (Parts Only) Ksdpoxv A Awjfx Afuolu The Qiagen Rotor-Gene Q is a high-performance real-time PCR cycler known for its unique rotary design and precision thermal control, offering exceptional uniformity and optical performance. This specific configuration includes 2 optical channels (Green and Yellow), making it ideal for targeted applications such as gene expression, viral detection, and SNP genotyping. Key Features Rotary Air Chamber Design: Ensures uniform thermal conditions and eliminates edge effects. 2 Optical Channels: Green and Yellow channels support common fluorophores such as FAM, HEX, and VIC. Rapid Cycling: Heating rate >15°C/s and cooling rate >20°C/s. High Sensitivity: Fast fluorescence acquisition (≤4 seconds

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1787, functionality: fully functional, temperature: 1,150 °C, total length: 23,700 mm, conveyor belt width: 620 mm, heating capacity: 320 kW (435.08 HP), pass-through height: 100 mm, The system has seen very little use and is in excellent condition. TECHNICAL DETAILS Maximum operating temperature: 1150°C Belt width: 620 mm Installed heating capacity: 320 kW in 8 zones Fuel: Natural gas Operation: Hydrogen + Nitrogen (N2 + H2) integrated Usable height: 100 mm Dimensions Infeed table length: 2 m Burn-off zone LED3 length: 1.5 m Sintering zone length: 7.5 m Rapid cooling zone length: 1 m Convective cooling zone length: 2 x 4 m Flame-free outlet with air shower length: 2 m Outlet table length: 2.7 m Total system length: 23.7 m Total system width: 2.3 m MACHINE DETAILS Natural gas consumption: 25 m³/h (80 mbar) N2 consumption: 45-65 m³/h (max. 80 mbar) Kljdpfjzclphsx Afueu H2 consumption: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temperature) EQUIPMENT Flame-free outlet Ceramic muffle Dual thermocouples Programmable Online diagnostic system Low NOx RS recuperative burners SiSiC burner tubes LED 3 de-waxing zone (utilizes the chemically bound energy of waxes and improves burn-off conditions, especially for heavy powder metallurgy parts (>0.9 kg)) "Target-Actual value belt speed comparison" function

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JUN4607, Year of construction: 2006, operating hours: 8,835 h, load capacity: 6,000 kg, lifting height: 4,000 mm, fuel type: diesel, empty load weight: 9,160 kg, TECHNICAL DETAILS Kodpfx Afezdqv Isuelu Load capacity: 6,000 kg Lifting height: 4,000 mm MACHINE DETAILS Unladen weight: 9,160 kg Fuel type: Diesel Engine power: 61.5 kW at 2,200 rpm Operating hours: 8,835 h

Condition: used, functionality: unexamined, machine/vehicle number: ML944E08, spindle speed (max.): 8,000 rpm, type of input current: three-phase, overall weight: 5,500 kg, input voltage: 400 V, CHEVALIER QP2033-L vertical machining center. The machine is available for inspection in Riga, Latvia. Ksdpfxjzfgmxe Afuolu The machine is currently powered on and can be inspected by appointment. Additional photos and technical information are available upon request.

Year of construction: 2022, condition: new, machine/vehicle number: 5YXXXX22, SINC MP Series briquetting press machine is the most economical solution for briquetting chip metals by pressing method. It enables you to press by processing the waste chips from CNC and similar machines in the factory. It is not only easy to transport the chips by briquetting instead of powder, but also minimizes metal losses. You can turn chip metals to solidifying and use them as raw materials. * The specifications in photo is for machine that have 60 diameters. Please ask specs for 40 and 80 versions. Kjdpeihca Dofx Afuolu

Condition: good (used), Year of construction: 2001, Hardinge Quest 51 SP CNC lathe, 2-axis Year: 2001 Kedpfxeylk U Uo Afujlu Control: FANUC Model: 18i-T Spindle speed range: 50–4200 Spindle motor power: 15 kW X-Axis Movement: 189 mm Workpiece diameter over bed: 520 mm Max turning diameter: 356 mm Bar-through hole (round collet): 51 mm, spindle bore 60 mm Distance between centers (z travel): 610 mm Turret head: 12 positions Tool shank cross-section, square, max. 25 mm Tool diameter, max. 40 mm Switching time (from station to station) 0.35 s Machine dimensions: width x depth x height: 1950 x 3860 x 1905 mm Machine weight: 5550 kg Accessories/options: - tool holders - swarf conveyor - documentations Under power in our warehouse!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Klsdpjy Uquhsfx Afuju Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Kledpsy Uiyvsfx Afuou Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, For sale: new Grundfos CRN5-11 vertical multistage pump. The pump has never been used and comes from warehouse surplus. The equipment is in excellent condition, stored in its original packaging. Manufacturer's documentation included in the set. Grundfos CRN series pumps are designed for use in industrial and water installations. They are characterized by high performance, reliability, and excellent build quality. Technical data Manufacturer: Grundfos Model: CRN5-11 A-P-A-E-HQQE Motor power: 2.2 kW Klodeyubcnspfx Afusu Frequency: 50 Hz Rotational speed: 2899 rpm Capacity: 5.8 m³/h Head: up to 56.5 m (max 76 m) Maximum pressure: 25 bar Maximum temperature: 120°C The pump is made of stainless steel, suitable for use in water installations, industrial systems, pressure systems, process installations, and water treatment systems. Condition: new, never used.

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Kodpfju U R E Aex Afujlu

Condition: good (used), Year of construction: 2020, functionality: fully functional, working width: 3,700 mm, welding power (max.): 2,200 kVA, wire diameter (max.): 25 mm, type of input current: three-phase, 1. EVG QC76/144-ZL/PV Wire Mesh Welding Line Description EVG High-Performance Mesh Welding Line - Type QC76/144-ZL/PV · Max. Sheet Width: 3,700 mm (Welding width: 3,600 mm) · Sheet Length Range: 1,500 mm – 12,000 mm · Wire Diameter Range: Line wire (6 – 25 mm) / Cross wire (6 – 16 mm) · Max. Working Speed: 90 CW (cross wire) / min. · Line Wire Spacing: 75 mm – 1,000 mm (Steplessly programmable) · Cross Wire Spacing: 50 mm – 2,000 mm (Steplessly programmable) Kljdpfx Afey Aig Ssuju · Number of Line Wires: Max. 33 wires · Input Material: Pre-cut and straightened line and cross wires (Cold-formed/Hot-rolled) · Power Rating: 2,200 kVA (Driving power: 120 kW) Key features · Versatility: Optimized for the economic production of special sheets and engineered fabric, even for the smallest lot sizes. · Precision: Features steplessly programmable spacing for both line and cross wires, allowing for highly customized mesh designs. · Heavy-Duty: Capable of welding large diameter wires (up to 25 mm), suitable for structural and industrial applications. · Automation: Advanced cascade welding system (automatic) for efficient multi-diameter operations. 2. EVG DRE16 Wire Straightening Machine Description EVG DRE16 High-Speed Wire Straightening and Cutting Machine · Wire Diameter Range: 8 mm – 16 mm · Max. Feed Speed: 160 m/min. · Max. Wire Strength ($Rp0.2): 600 N/mm2 · Driving Power: 85 kW · Power Supply: 380 V, 60 Hz, 3ph · Color: RAL 7001 (Grey) / RAL 3011 (Red) · Standard Compliance: EN 60204-1, IEC 60364-4-41 TN-C Key features · High Productivity: Offers a superior straightening speed of up to 160 m/min, ensuring high throughput for downstream welding lines. · Material Compatibility: Specifically designed to handle high-strength wire up to 600 N/mm2. · Reliability: Built with EVG’s renowned precision engineering for consistent straightening quality and long-term durability. * Machine can be seen in factory.

Condition: new, functionality: fully functional, power: 377 kW (512.58 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. Fullstar-60 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing Fullstar-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-90 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: Fullstar-90 - Production Capacity: 120-180 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 900x650mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1000 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1st Chassis: 1700x4500 mm : 2nd Chassis: 1550x4000 mm(Grizzly) ¬- Screw Washer Size: 600x5000 mm (Twins Helix) - Total Motor Power: 377 Kw - Generator (optional): 450 kvA - Plant Dimensions: 1st Chassis: 18960 x 4070 x 4650mm : 2nd Chassis: 15500 x 4650 x 4400mm Klodpfx Afjzd Nr Ioueu FULLSTAR-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2004, Horizon BQ-270 Single-Clamp Perfect Binder, used Experience efficient and precise bookbinding with the Horizon BQ-270. This fully automatic perfect binder offers easy operation, high speed, and versatile applications for your book production. Key Features: - Fully automatic settings for quick setup - User-friendly touchscreen for easy operation - High productivity with up to 500 books per hour - Precise binding with even glue distribution - Versatile format handling for different book sizes and thicknesses - Compact design for space-saving integration - Quick format change for efficient production Specifications: - Book format: max. 320 x 310 mm; min. 135 x 115 mm - Cover format: max. 660 x 320 mm; min. 240 x 135 mm - Book thickness: max. 50 mm; min. 1 mm - Cover weight: 90 - 300 g/sqm - Cover pile height: max. 70 mm - Production speed: up to 500 cycles/h - Dimensions: 2,720 x 910 x 1,545 mm - Power: 400V; 50Hz - 2.7 kW - Weight: 900 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Klsdpfoy Ec Egox Afuou Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Year of construction: 2012, CNC lathe, 3-axis, MAZAK QT SMART 200M Year of manufacture: 2012 Condition: very good Max. machining diameter: 360 mm Max. machining length: 532 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm - CNC control: Mazatrol Smart - 3-jaw chuck: KITAGAWA BB-208, diameter 210 mm - Tool Eye - C-axis - Interface for bar feeder - NC tailstock - Chip conveyor, side discharge, Mayfran - 4 driven tool holders, 2/2 Kljdpozbrmqsfx Afusu - 8 standard tool holders Machine in very good condition