Used Gruss Suction Device for sale (13,226)

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake nozzle: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum flow rate: 4,900 m³/h Dcedpfx Aocdr E Asptsl Nominal flow rate: 3,534 m³/h Negative pressure: 2,451 Pa Filter area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Briquetting capacity: 30 - 50 kg/h Location: Available at warehouse 54634 Bitburg Subject to prior sale.

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Exhibition model - Immediately available Exceptional special price Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Djdpfocdy I Rjx Aptjcl Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Dcsdpfxocnw T Ie Aptjl Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. Djdpfecnw U Dox Aptocl The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: used, Technical details: table length: - mm table width: - mm table load: - t height: 1250 mm width: 1000 mm depth: 800 mm Dsdpozuzr Ijfx Aptocl weight of the machine ca.: 1200 kg 2 units available (price per unit) According to DIN 650: 6 × T-slots When making your inquiry, please specify the number of clamping angles required. *

Condition: used, Technical details: table length: - mm table width: - mm table load: - t width: 1250 mm depth: 1000 mm height: 1600 mm 3pieces available (price per piece) according to DIN 650:nach DIN 650: T-Nutenbreite a=27,5; h= 55; b= 49; c= 21 mm; Abstand der T-Nuten 200 mm Spannfläche: B: 1300 x H: 1600 x Dicke: 63 mm Bei Ihrer Anfrage beziehen Sie sich bitte auf die Anzahl der gewünschten Aufspannwinkel. Dcedpfezuzrzox Aptel *

Condition: used, Gulmay CP225-1/29 X-Ray Device – Radiographic Irradiation Unit Maximum Power: 3200 W kV Range: 20 – 225 kV kV Accuracy: ± 1% of set value kV Reproducibility: Better than ± 0.05 kV High Voltage Ripple: Less than 5.0 V/mA with 10M high-voltage cable mA Range: 0 – 30 mA mA Accuracy: ± 0.5% of set value mA Reproducibility: Better than 2 μA Input Voltage: 220 V ±10% 47 – 63 Hz Input Current: 27 A at 220 V Output Connector: R30 Cathode Dimensions (W x H x D): 435 x 780 x 818 mm Storage Temperature: -40°C to +70°C Operating Temperature: 0°C to +40°C Relative Humidity: 95% Duty Cycle: 100% Comms: Analog / RS232 / RS422 You are welcome to arrange an appointment for viewing. We are happy to organize low-cost shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is available. Dcedpoy Akczofx Aptjl Sale subject to prior sale. Visit our shop and see our other offerings. The stated company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical specifications or errors in the item description may occur and are subject to change.

Condition: ready for operation (used), Assfalg ASO 650 S Edge Milling Machine, Chamfering Machine, Deburring Machine Maximum chamfer width: 0-7mm Angle adjustment: 15°-45° Dimensions: approx. 400 × 500 × 300 mm Weight: approx. 52 kg Radius [mm]: 1.2 | 2 | 2.5 | 3 | 4 | 6 You are welcome to visit us for an inspection. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Dedpfozy E D Sex Aptocl Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Dcjdpfx Ajh Nrh Ueptel Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: excellent (used), Collet set Djdpfxjupzblj Aptocl MK 4 Make Horma 17 pieces from 4-25 mm in diameter (28562) in carrying case

Condition: ready for operation (used), adjustable Dcedpfoha Hhzsx Aptsl

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: documentation/manual, foot remote control, Tilting device for containers, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Speed infinitely adjustable, 80 to 1600 mm/min. Dcedpfxozu I Ipj Aptsl Diameter 40 mm to 1400 mm Roller diameter 200 mm L: 800 x W: 370 x H: 450 Model or color variations possible Note: Height adjustment / support stand dimensions can be customized for an additional charge. Example as shown in the image. Additional charge: €1200.

Condition: ready for operation (used), Switch Testing Device - 3x test stations for appliance switch testing Dcsdpfxex I Ef Us Aptsl - Voltage: 0–600V AC / DC - Current rating: max. 40A - Operation of test switches via pneumatic cylinders - Testing with resistive and inductive loads according to EN 61058 (VDE 0630) - 1x thermal chamber (oven) for testing at ambient temperatures up to 125°C - Testing of appliance switches with rated data 250Vac / 16(4)A / 125°C Buyer responsible for disassembly!

Condition: used, Used cutter suction excavator Z-243 Operating hours: approx. 600 Application: self-maneuvering cutter suction dredger for cleaning water bodies, sludge removal from water bodies Pumping capacity: up to approx. 350 m3/h Suction dredger depth: approx. 5 m Total length with extension: 13,20 m Overall width: 2.90 m Overall height: 2.70 m Depth: 0.75 / 1.18 m Draught: ready for operation 0.62 m Suction pipe diameter: 150 mm Excavator depth at an angle: 45° for extension 5.0 m Dcodpfxerq I I Nj Aptsl Fuel capacity: 300 liters Cutting speed (variable speed): 0-90 rpm and vice versa Cutting power: 10 kW / 13 hp Deutz main engine: 90 kW / 120 hp Transportable on the road: Yes Largest part for transport: (main pontoon with extension) 11.60 x 2.50 x 2.50 m, approx. 10 tons Cabin: One-man operation in comfortable, low-noise cabin Transport: Can be dismantled and transported by road, overseas transport in containers Pontoons: The hull consists of several pontoons connected by a proven coupling system Coating: Marine coating system and cathodic protection for optimum protection Consumption: Low fuel consumption and low total cost of ownership System: Closed throat cooling system

Condition: used, functionality: fully functional, Truxor Amphibious Vehicle Suction Excavator with pump and cutter, grab for removal of sludge, sediment, or aquatic vegetation. The Truxor DM 5045 is an amphibious tool carrier, specifically designed for operations in water bodies, wetlands, and shorelines. Engine: Kubota V1305, liquid-cooled, 4-cylinder, water-cooled turbo diesel. Emission standard: EURO 3 33kW/44.9 hp/3000 rpm. Coolant volume: approx. 8 l. Electrics: Generator 12 V, 40 amp, 45 Ah battery, work lighting. Fuel: 35 l tank, consumption min. approx. 3.8 l/h, average approx. 4.5 l/h. Hydraulic system: demand control with dynamic adjustment, max. 140 l/min. Tank capacity 19 l + system approx. 36 l. Control via joystick: vehicle movement, lifting, tilting, weight distribution. Cab: foldable canopy, adjustable driver's seat, instrument panel. Speed: 0-100 m/min (without attachments). Front lift: lifting capacity 250 kg. Quick-change attachment system, tilting function. Saltwater-resistant aluminum, hot-dip galvanized steel frame. Length: 4,700 mm, with lifting arm 5,000 mm. Width: 2,060 mm. Height max. 2.59 m, min. 1.9 m. Dcsdpfeyn Hpasx Aptsl Weight: 1,400 kg (vehicle only), additional weight for attachments. Truxor available ex stock Gladbeck without trailer.

Condition: used, Control: Siemens SIMATIC PANEL, connected load: 28kW, an on-site inspection is possible. Dcodpszybv Dofx Aptsl

Condition: ready for operation (used), Schunk Tribos SVP2 Clamping Device – Quick-Change System Dcodpfx Aezyrczjptsl You are welcome to visit us for a demonstration. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Hommel Etamic W20 Jenoptik Waveline Roughness Tester, Measuring Device (562) Measuring range: max. 20 mm Measuring span: ± 300 µm Accessories: Tripod Granite measuring plate PC You are welcome to visit us for an inspection. We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. Dodezyqzcepfx Aptecl For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Return air and exhaust air ducting: The cleaned air is returned to the machine room via galvanized sheet metal ducts. The return air duct is connected to the upper part of the filter unit. A tested fire protection damper K 90 is installed in the area where the duct passes through the workshop wall. Dcsdpjzu Ah Djfx Aptjl Technical data: Duct cross-section: 700x700 mm Return air velocity: 7.5 m/s Exhaust air velocity from the workshop:

Condition: used, Components of a sawing system Manufacturer: Linck Djdpfx Aszuz I Njptscl Type: VZM & CSMA consisting of: CSMA extraction device Manufacturer: Linck Type: Av / CSMA Year of manufacture: 2018 The CSMA extraction device offers powerful and flexible material handling in automated production lines. It is designed for variable workpiece sizes and ensures continuous material transport. Technical data - Drive power: 4 x 4 kW - Feed rate: 85 m/min VZM centering device Manufacturer: Linck Type: VZM The VZM centering device is designed for precise centering tasks at high feed rates. The robust design allows it to be used under demanding industrial conditions. Technical data - Drive power: 2 x 7.5 kW - Feed rate: 84 m/min Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Year of manufacture: 1999 Technical data - Usable cutting length: 1600 mm Dcjdozuyywopfx Aptol - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) High-speed saw carriage - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, mileage: 2,06,700 km, power: 205 kW (278.72 HP), first registration: 08/2005, fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 6x2, wheelbase: 5,550 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 9,080 mm, total width: 2,480 mm, Year of construction: 2005, Equipment: ABS, air conditioning, electric window regulation, = Additional Options and Accessories = - 6x2 - Digital tachograph - Lift axle - Air suspension - PTO - Radio/CD player - Sun visor = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 6,374 cc Axle Configuration Tire size: 315/80 R 22.5 Dcodpfszy I Tijx Aptjl Front axle: Steered; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Rear axle 1: Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire tread depth left: 25%; Tire tread depth right: 25%; Suspension: Air suspension Weights Unladen weight: 15,040 kg Payload: 11,960 kg GVWR: 27,000 kg Condition Damage: none

Condition: excellent (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Dcsdpeh T Uwvofx Aptjl Included in the scope of supply: 1x Push-through safety device, used Material color: hot-dip galvanized Overall length: approx. 2,700 mm U-profile: 50 x 50 mm Agraffen dimensions: 335 x 50 mm (H x W) 4x Hex bolt: M10 x 35 mm 4x Lock nut: M10 8x Washers: M10 Additional information: System: SSI Schäfer For type designation: PR350/400 Designed for double rows of shelving Suitable for clear width: approx. 2,700 mm General information about the item: This item is offered for collection only. Any further transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet (without unloading)

Year of construction: 2021, condition: excellent (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: HEINRICHSGLÜCK, swiveling welding rotator -Type: DK1.000-P800 -Load capacity: 1000 kg -Control: via foot pedal -Three-jaw chuck: Ø 380 mm, three-jaw chuck bore Ø 150 mm -Base plate: Ø 800 mm -Speed: 0-1.5 rpm Right/Left rotation -Axles: 2 pieces -tiltable: electric -Height adjustment: No -Transport dimensions: 1430/1040/H1175 mm Dcedpfjy Ul D Dex Aptjl -Weight: 913 kg

Condition: used, Year of construction: 2020, An FGC extraction system for the extraction of oil and coolant aerosols from one or more CNC machines is offered. Volumetric flow rate: 600m³/h, motor power: 1.5kW. Including telescopic stand. The filters should be replaced. An on-site inspection is possible. Dcedpfx Aozxr R Aoptjl