Used Indumasch Va 200/6 for sale (61,779)

Year of construction: 1996, condition: used, functionality: unexamined, machine/vehicle number: 2566, Marsilli coil winding machine with 6 spindles, No. 437 Type WM 2002/6 - 100, serial no. 2566 Prsdpoyuthiefx Alwob

Condition: ready for operation (used), Seidel 20K-200/100-B inverter SN: 52-58645 L1 3x148V 21 kVA,used, good condition, 100% functional, scope of delivery according to photos Prjdpfxel Eckvj Alwob

Condition: ready for operation (used), Seidel 20K-200/100-B inverter SN: 52-68251 L 3x148V 21 kVA,used, good condition, 100% functional, scope of delivery according to photos Pjdpfx Asl Eck Djlwsrb

Condition: refurbished (used), Year of construction: 1990, Drum chipper / chipping machine / wood shredder fully reconditioned (workshop-reconditioned) Make: Rudnick & Enners Year of manufacture: 1990 Prjdpfszq Sqgox Alwjb Rudnick & Enners drum chipper, type TH-200/650/3 workshop-refurbished (fully reconditioned) with new bearings (spherical roller bearings) and tested rotor New blades and counter-blades Feed width/height: 650 x 200 mm Rotor diameter: 600 mm Screen mesh size: 50 x 50 mm Drive power: 75.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,500 kg Machine colour: RAL 6011 Reseda green Without electrical installation and without control cabinet

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any work roll diameter: 250 mm Pedop E Ed Rjpfx Alwjrb barrel length: 250 mm roll core for rolling rings: 190 mm

Year of construction: 1993, condition: ready for operation (used), A complete paint shop is available. 1) Sergiani S.p.A. Monomatic S, year of construction: 2001. 2) Finnrose FLT 6, year of construction: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of construction: 1993. 6) Karl Heesemann FGA 6 EX, year of construction: 1993. 7) Finnrose FLT-4.5, year of construction: 1993. 8) Bürkle DAL2-1300, year of construction: 1985. Hackemack KTR 2040, year of construction: 1996. All machines are part of a paint shop. On-site inspection is possible. Podpfx Aletpp H Ejworb

Condition: ready for operation (used), Seidel 20K-200/100-B inverter SN: 52-52-99546 L 3x148V 21 kVA,used, good condition, 100% functional, scope of supply acc. photos Pjdpfxsl Eckrs Alwjrb

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Psdpfx Ajyg Nu Nolwerb

Condition: excellent (used), functionality: fully functional, We offer the KOMET PowerVac 200 double-chamber packaging machine—a professional device for vacuum packaging food products in meat processing plants, food processing facilities, the food service industry, and food processing operations. This model belongs to the double chamber model series, i.e., two-chamber machines that perform well where smooth operation, high efficiency, and consistent seal quality are essential. Prjdpfxsy Snpqo Alwsb KOMET PowerVac 200 has a chamber measuring 580 x 760 x 215 mm, and the maximum recommended bag size is 400 x 700 mm. As standard, the machine is equipped with 2 sealing bars, each 420 mm long. The machine operates on a 400V, 3Ph+N+PE, 50Hz power supply, with parameters of 4.807 A and 1.6698 kW. Technical specifications: Manufacturer: KOMET Model: PowerVac 200 Type: dual-chamber packaging machine Power: 1.6698 kW Power supply: 400V, 3Ph+N+PE / 50Hz, 4.807 A Chamber dimensions: 580 x 760 x 215 mm Seal length: 2 x 420 mm Maximum bag size: 400 x 700 mm Pump: 40 m³/h External dimensions with lid closed: 1340 x 900 x 1170 mm External dimensions with lid open: 1340 x 900 x 1450 mm Weight: 335 kg standard Key advantages of the KOMET PowerVac 200 packaging machine dual-chamber design for efficient vacuum packaging, chamber dimensions: 580 x 760 x 215 mm, wide double seal, stainless steel and durable construction, program-controlled operation with a sensor, a solution for facilities requiring repeatability and reliability.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, nominal power (apparent): 63 kVA, secondary voltage: 200 V, type of output current: three-phase, output voltage: 200 V, Equipment: documentation/manual, type plate available, Dry type transformer 3 phase transformer 63 kVa p 3x400V/sz 3x200 V 63kVa 3 phase transformer for sale in excellent condition Manufacturer: Trafó Print Predpfx Aleydrgpewjb type: BTZ63000 power: 63kVa U PRIMARY: 3X400V (3x125A) U SECONDARY: 3X200V frequency: 50Hz GE Record D250 compact circuit breaker steel housing

Condition: new, Bernardo Universal Lathe Solid 460 x 2000 Pro Vario Technical Specifications Centre distance: 2000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill stroke: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1370 mm Weight approx.: 2030 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, set speed displayed on digital readout • Hardened and ground gears and shafts, including in feed gearbox • Standard with rapid traverse longitudinally and in cross for reduced non-productive times • Central, user-friendly feed and thread selection with leadscrew and feed rod • Oversized, hardened, and precision-ground gears Prjdoxl Tcmepfx Alweb • Simple, smooth, and precise speed and feed adjustment • One-piece cast machine bed, extremely torsion-resistant and low-vibration, ensuring essential prerequisites for precision turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Foot pedal with CE-compliant brake function • Coolant system • Frequency inverter • Overload clutch • Rapid traverse longitudinal and cross • Change gears • Reducing sleeve • 2 centres • Thread dial indicator • LED machine lamp • Chip guard at the rear • Operating tools

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, saw band length: 4,115 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsaw in heavy-duty construction, featuring a horizontally parallel-moving saw band, designed for cutting profiles, tubes, and solid material of all qualities, including extremely difficult-to-machine materials (such as titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. Saw unit manufactured in solid polymer concrete, ensuring maximum running smoothness and extended saw blade service life. The saw unit is guided via a vertical and a round-column guide (double-column guide), with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically preloaded carbide saw band guides. Material clamping is achieved via two hydraulic vises. The machine operation is user-friendly. Cutting length can be set using a hand wheel, with a resolution of 0.1 mm. Piece count is set via a piece counter; upon reaching the set quantity, the machine switches off automatically. Material feed is executed by a feed cylinder, ensuring the highest cutting accuracy. The machines are easy to operate and work fully automatically. Model: SSB 260 VA Cutting capacity: 260 mm x 260 mm (Ø 260 mm) Technical Data: Bandsaw KASTO Bandsaw Automatic Machine Prodpfxexc D Ege Alwjb Machine Type: SSB 260 VA Technical Data: 2-column guided Year of manufacture: 1991 Cutting range: 260 x 260 mm Drive power, saw gearbox: 4 kW Drive power, auxiliary units: 6.5 kW Cutting speed: 15-125 m/min Saw feed hydraulics: Infinitely adjustable Saw blade dimensions: 4115 x 41 x 1.1 mm Feed length: 600 mm Maximum feed (multiple feed): 5400 mm Material support height: 850 mm Machine dimensions: Length/Width: 1690 x 1900 mm Height: 2030 mm Machine weight: 2100 kg Accessories: - Chip conveyor - Coolant system - Multiple feed - Side guide rollers - Machine roller conveyor - Adjustable side guide rollers - Prepared for bundle clamping device - Multiple feed counter

Condition: new, plate thickness 6 mm pressure 12 t cutting range Breite x Länge 200 mm no. of strokes 15 Hub/min cutting angle 30 - 140 ° Prsdpfx Ajll Dbuslweb total power requirement 4 kW weight of the machine ca. 1,02 t dimensions of the machine ca. 1065 x 900 x 1210 mm

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) Pedpfxouxfu Ne Alwjrb -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, all stainless steel twin shaft paddle mixer intermeshing mixer Pedjzzwk Hepfx Alwsrb useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard 18 kW

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical data: Sliding table length 3200 mm Cut length sliding table 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at rip fence 1250 mm Prodew Nacvjpfx Alweb Length stop on cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: Motor 7.5 kW Tele-Digit length stop With central digital wireless display 0.1 mm in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° – 90° on the aluminum double sliding table, length and angle measurement adjustable via scale; for cross cutting up to 1375 mm with length compensation for preferred angles 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, 67.5°, incl. splitter wood, wall holder and an additional factor scale for easy calculation of incorrect miters for different workpiece widths Swivel device for the cross slide Quick ergonomic pushing into the park position 2 clamping clamps for sliding table Current list price: 46254.- Availability: short-term Storage location: Flörsheim

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 4.2 kW -Output: 133 V 200 Hz -Power output: 6 kVA -for: Edge bander, edge banding machine -Weight: 115 kg Pedjb A Hq Ejpfx Alworb

Condition: new, Year of construction: 2025, operating hours: 1 h, power: 200 kW (271.92 HP), pressure (max.): 13 bar, New variable screwcompressor ALMIG Variable XP 200 air cooled Controller: Aircontrol Premium Year 2025 Hours: 1 h new condition, available short.(4 weeks) Technical specifications: type: Variable XP 200 Possible operating pressures of the system: 5 to 13 bar Quantity delivered at 5 bar : 9.63 to 43.58 m³/min at 6 bar : 9.80 to 38.85  m³/min at 7 bar : 9.92 to 35.00 m³/min at 8 bar : 9.65 to 33.00 m³/min at 9 bar : 9.61 to 31.25 m³/min at 10 bar : 9.56 to 30.20 m³/min at 11 bar : 9.50 to 28.75 m³/min at 12 bar : 9.43 to 26.26 m³/min at 13 bar : 9.37 to 25.01 m³/min Installed power: 200 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400 V / 50 Hz Sound pressure level (DIN 45635 T13) : 78 dB (A) Compressed air connection: flange DN 100 Psdjzm Nu Uspfx Alwjrb Dimensions and weight Length : 3300 mm Width : 1860 mm Height : 1945 mm Weight : 4320 kg Visit our store. We´ve got a lot of compressors and dryers on stock.

Year of construction: 1999, condition: good (used), Product: BMF Year of production: 1999 Metal chain width: 200 mm Pjdpehq Hz Hofx Alwjrb Long-distance guide lanes: approx. 300 mm Chip outlet length 900/1250 mm Insertion length: approx. 1000 mm Insertion height 260 mm Insertion width 350 mm Total length: 3600 mm Transport height - ejection height: 800 mm Belt speed 26 mm / sec. = 1.6 m / min. Engine power: 0, 25 kW Mains connection was 400 volts, 50 Hz Enclosure size: H x W x D; 8700 x 900 x 1500 mm Weight 400 kg

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 0-250-17-2346, functionality: fully functional, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 300 mm, number of axes: 4, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 4,300 mm Travel range, Y-axis: 2,250 mm Travel range, Z-axis: approx. 300 mm Main spindle Power: 10 kW Tool interface: HSK-F63 Spindle speed, max.: 24,000 rpm Axis configuration Controlled CNC axes: 4 Interpolating C-axis Servo-controlled Z-axis Tool changer Number of positions: 14 Tool holder: HSK-F63 Drilling unit Number of drilling spindles: 12, vertical Integrated groove saw Vacuum system Vacuum pumps: 3 x Becker MM1322 AV Total air flow: approx. 300 m³/h MACHINE DETAILS CNC control Version: WoodWOP 6 Beckhoff Industrial PC Beckhoff TwinCAT CNC Bosch Rexroth IndraDrive Digital Servo Drives SERCOS Motion Control Supply voltage: 415 V Prjdjzld Iyepfx Alwob Frequency: 50 Hz Phases: 3 Full-load current: 61 A Main fuse: 80 A Control voltage: 24 VDC EQUIPMENT Matrix vacuum table 10 vacuum zones Heavy-duty gantry construction Automatic central lubrication system Twin extraction hoods with automatic positioning

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition Pedpfeyxtfwex Alwerb complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Condition: used, Year of construction: 1996, sheet width 360 mm coil weight 550 kg coil internal dia. 420 - 520 mm coil external diameter 1600 mm total power requirement 2,2 kW weight of the machine ca. 2 t Pjdpfx Alsymp Rdeworb

Condition: new, Load Weight Shelf 18000 kg Loading weight per level 3000 kg Number of load levels 6 Stk. Recommended material length 6000 mm Column width 2 x 2000 mm Shelf height 2440 mm Podpsfgyg Hofx Alwerb

Condition: new, 460 mm 460 mm 460 x 460 mm saw band length 5450 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,2 t dimensions 2,675x 2,15 x 2,05 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting. Predpfxofg E Hve Alwjb

Condition: good (used), Indexing table HAU RK 6-1200, 6 work piece spindles and 4 polishing units type PES, 11 kW each, max. width polishing wheel 300 mm, incl. oscilation, electr. driven hight adjustment, liquide compound feeding system (spray guns + pressure tank, control cabinet Podpfo R Ecgjx Alwjrb Price and additional information on request.