Used Kraussmaffei Ft-R-H-25-20-3600.0°.65° for sale (1,05,165)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires Ksdpfx Anji Rixkjienc 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: new, Year of construction: 2026, Extraction capacity approx. 6500 m3/h Motor power 5.5 kW Speed ​​3000 rpm Rated voltage 400 V, 50 Hz Extraction nozzle 280/200 mm Extraction speed 28 m/sec. Number of filters 37 Negative pressure 3000Pa Filter category G Polyester filter material Kedpfx Anev Dtl Aeijnc Noise level 80 dB without connection / 65 dB when connected to the machine via the pipe Filter area 17.1 m2 Dimensions (L x W x H) 2080 x 920 x 2100 mm Weight 248 kg

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from KHS Krauss Maffei KM 1000-5000A injection molding machine -Pump 1: Voith type IPH 6/5-125/50 300 bar -Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher 75 kW 1500 rpm Knedpfog Avqcjx Anisc -Individual components: filters/valves, see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Condition: new, Year of construction: 2026, Machine type: Turbo 20 Manufacturer: ERBA Power kW: 1.1 Total volume: 20 L Description: The ERBA Turbo 20 is a centrifugal finishing system designed for deburring, smoothing, and polishing small to medium-sized workpieces with short process times. The machine is equipped with a digital process timer and a digital speed display. The disc speed can be adjusted via a frequency inverter. The Turbo 20 is available in both dry and wet versions. It can be integrated into a production line with a separation section. As an experienced partner, we provide comprehensive expertise in the field of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. The listed price is net, plus the currently applicable VAT and freight costs. The images may include accessories that are optionally available and subject to an additional charge. The stated price refers to the base machine. Photos are for reference only; actual appearance and size may differ from the images. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. Knedsyq Rcijpfx Anisc The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, phone, messaging portal). In the first step, we will send you a non-binding offer, which includes information about our general terms and conditions, imprint, and the right of withdrawal before a purchase/contract is concluded.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2007, total length: 9,580 mm, total width: 2,450 mm, wheelbase: 8,010 mm, color: other, Year of construction: 2007, Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 3.720 kg Carrying capacity: 35.280 kg Knjdpfx Anez Iylwsioc GVW: 39.000 kg APK (MOT): tested until 02/2027 Registration number: OJ-98-VX

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2007, total length: 9,680 mm, total width: 2,450 mm, wheelbase: 8,010 mm, color: other, Year of construction: 2007, Rear axle 1: Max. axle load: 9000 kg Knsdozxc Acopfx Anioc Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 3.860 kg Carrying capacity: 35.140 kg GVW: 39.000 kg Registration number: OJ-94-XP

Condition: used, Year of construction: 2016, - Brand: Manitou - Type : MH 25-4T BUGGIE - Year of construction: 2016 - Hours: 2544 - Engine: Kubota diesel - Drive: 4x4 - Lifting capacity: 2500 kg. - Lift height: 370 cm. - Clearance height: 200 cm. - Sideshift - Work lights - Road lighting - Dutch license plate - Nice clean 4x4 forklift - Trade-in and transport possible - Safety inspection possible * Brand: Manitou *Type: MH 25-4T BUGGIE * Construction year: 2016 * Engine: Kubota diesel * Drive: 4x4 * Lifting capacity: 2500 kg. * Lifting height: 370 cm. Knedpfx Anjx H Ayaoisc * Clearance height: 200 cm. * Hours: 2544

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, input voltage: 1,10,000 V, nominal power (apparent): 20,000 kVA, secondary voltage: 20,000 V, For sale is a high-performance power transformer from the renowned manufacturer ALSTOM. This unit is ideal for industrial power grids or as a redundancy transformer for grid operators. Key technical features: - Power rating: 20 MVA (20,000 kVA), upgradable to 25 MVA - Voltage: 110,000 V (HV) / 20,000 V (MV) / 10,000 V (LV) - Year of manufacture: 2001 (Type TC1743G) - Cooling: ONAN (option to upgrade to ONAF) - Tap changer: Equipped with high-quality MR on-load tap changer with 19 steps Weight specifications: - Total operational weight (incl. oil): 40.8 t - Dry weight (without oil): approx. 29.3 t Kedpfx Aeyzl T Sonisnc Optional accessories such as switchgear and instrument transformers are available upon request. Condition & Service Options: The transformer is in operational condition. To ensure maximum operational safety, we offer the following options: ✅ Complete overhaul: Full technical refurbishment on request ✅ New paintwork: Professional repainting available Location: Cloppenburg Price: Negotiable / open to offers For inquiries or detailed documentation (test protocols, dimension sheets), please contact us. An inspection can be arranged by appointment.

Condition: used, Year of construction: 2014, operating hours: 5,426 h, lifting height: 4,850 mm, fuel type: electric, mast type: triplex, battery manufacturer: GNB, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, General information Year of manufacture: 2014 Weights Empty weight: 3.806 kg Knsdpfxjz I Atwj Anioc Battery Battery: 625 Ah, 48 V, Year of manufacture 2014, Brand of battery GNB Functional Lifting capacity: 2.000 kg Maximum passing height: 216 cm Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: triplex = Additional options and accessories = - 3rd valve - Heater = Remarks = = Additional options and accessories = - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, operating hours: 20 h, power: 1.1 kW (1.50 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 220 mm, cutting width (max.): 280 mm, control type: manual, roller diameter: 50 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 65 rpm, rotational speed (min.): 30 rpm, total height: 170 mm, total length: 1,410 mm, total width: 600 mm, overall weight: 235 kg, table height: 950 mm, year of last overhaul: 2025, cutting speed: 70 mm/min, saw blade length: 2,450 mm, saw blade width: 27 mm, type of cooling: water, Equipment: CE marking, documentation/manual, Metal Band Saw – Direct from the Manufacturer ✓ Machine sold directly by the manufacturer ✓ 6-month warranty ✓ Service and spare parts provided by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty cast iron construction ✓ Inspection and test run available before purchase ✓ Available for immediate delivery Technical Specifications Maximum cutting diameter: 220 mm Maximum rectangular cutting capacity: 230 × 150 mm Continuously adjustable mitre cutting: 0° to +60° Gravity-fed saw arm with hydraulic feed control Two-speed motor: 0.75 / 1.1 kW Blade speed: 30 / 65 m/min Blade dimensions: 2450 × 27 × 0.9 mm Manual quick-release vice Coolant system Power supply: 3 × 400 V Machine weight: approx. 235 kg Built for Daily Industrial Use The saw is designed for both single-piece and small-batch production. All major load-bearing components are made of cast iron, ensuring excellent rigidity, high cutting accuracy, and a long service life. The saw head is inclined at 25°, which helps extend the life of the saw blade. Inspection and Test Run The machine can be inspected and tested under working conditions at the manufacturer's premises in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine and answer any questions you may have. Ksdpszhmr Hofx Anisnc

Condition: reconditioned (used), functionality: fully functional, operating pressure: 200 bar, empty load weight: 195 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 13/20-4S HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. Ksdpfx Ajzc Emmonienc A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 200 bar and 1300 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 13/20-4S Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 600 - 1300 Working pressure (bar) 30 - 200 Max. Water heating temperature (°C) 80-155 Connection power (kW) 9.3 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 195 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limit Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2007, total length: 9,580 mm, total width: 2,450 mm, wheelbase: 8,010 mm, color: other, Year of construction: 2007 Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 3.720 kg Carrying capacity: 35.280 kg Knjdpfx Aezr Un Renioc GVW: 39.000 kg Registration number: OJ-61-VJ

Condition: used, Year of construction: 2015, operating hours: 7,444 h, load capacity: 1,800 kg, fuel type: electric, power: 11 kW (14.96 HP), gearing type: automatic, overall weight: 3,470 kg, empty load weight: 2,235 kg, color: grey, mileage: 7,444 km, first registration: 08/2015, maximum load weight: 1,800 kg, suspension: other, number of seats: 1, driver cabin: other, wheelbase: 1,448 mm, emission class: none, fuel: electricity, Equipment: onboard computer, The Still RX 20-18P/H 4-RAD is a reliable electric front loader that is perfect for versatile transport and lifting work. This used forklift was first registered on August 25, 2015 and has a robust output of 11 kW (15 HP). With only one previous owner and 7,444 operating hours, it remains in good condition. The device is equipped with an automatic transmission and has a maximum load capacity of 3,470 kg. The forklift is characterized by its long forks, which enable efficient handling of bulky materials. It is painted in a striking gray-yellow, which contributes to visibility and safety in the work environment. The forklift is available for inspection in Rohrbach (Palatinate) and can be flexibly loaded and delivered within Germany for an additional charge. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale. Knsdpfx Anevy I A Ujisc

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,714 h, load capacity: 2,500 kg, lifting height: 6,465 mm, free lift: 2,274 mm, fuel type: gas, mast type: triplex, construction height: 2,804 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, LPG Forklift Load Centre: 500 ISO Class: ISO Class 2 = 1,000 – 2,500 kg Kodpfx Aoydr Hvjnijnc Mast Type: Triplex Transmission: Hydrostatic / 2-pedal Condition: Refurbished without warranty Technical Condition: Good Front Tyres Type: Superelastic Front Tyres Size: 23x9-10 Front Tyres Condition: 20 – 40% Rear Tyres Type: Superelastic Rear Tyres Size: 23x9-10 Rear Tyres Condition: 20 – 40% Description: Delivery includes new FEM 4.004 inspection with inspection certificate. For further questions, feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website at fleischmann-foerdertechnik. We are happy to provide offers for leasing & financing as well as delivery at attractive rates. Trade-in of Linde equipment is also possible – even if you do not purchase a machine from us. The operating hours shown were recorded at the time of listing. Subject to prior sale, changes, and errors. Clamp Fork, Sideshift, Durwen Clamp Fork with separate sideshift 3rd Valve, 4th Valve, Rear Working Lights, Heater, Road-legal (StVZO), Full Cabin, Air Conditioning, Full Free Lift, Safety Light, Double Bottle Holder

Condition: used, axle configuration: 3 axles, first registration: 07/2007, suspension: air, color: other, Year of construction: 2007 Make axles: BPW Brakes: disc brakes Knodpj Aa N Ifefx Aniec Suspension: air suspension

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2007, total length: 9,290 mm, total width: 2,470 mm, wheelbase: 7,460 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Drum brakes = More information = Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Ksdjztrgyepfx Anijnc Empty weight: 3.983 kg Carrying capacity: 37.017 kg GVW: 41.000 kg Registration number: OJ-12-YP

Condition: used, Year of construction: 2015, operating hours: 6,642 h, load capacity: 1,800 kg, fuel type: electric, power: 11 kW (14.96 HP), gearing type: automatic, empty load weight: 3,326 kg, color: grey, mileage: 6,642 km, first registration: 08/2015, maximum load weight: 1,800 kg, suspension: other, number of seats: 1, driver cabin: other, wheelbase: 1,448 mm, emission class: none, fuel: electricity, Equipment: onboard computer, Without charger. 48V PB battery, 28.3kWh, 775Ah Ksdpfx Anjvkyk Ejionc The Still RX 20-18P/H 4-WHEEL DUPLEX is a used electric front loader that is ideal for various industrial applications. This forklift is characterized by its robust duplex mast and 4-wheel drive, which makes it particularly stable and versatile. It is powered by a powerful 48V PB battery with 28.3 kWh and 775 Ah, which ensures a reliable energy source. The forklift offers an output of 11 kW (15 HP) and is equipped with an automatic transmission, which increases operating comfort. The device was first registered on August 25, 2015 and has a mileage of 6,642 km and 6,642 operating hours. It has been used by a previous owner and is in good used condition. The forklift is in an attractive gray-yellow color. The design allows a variety of loading options, making it suitable for use in different scenarios. Only sold to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Year of construction: 2000, condition: used, machine/vehicle number: SIxx, Demag chain hoist crane hoist 5000 kg DKUN 20-2500 K V1 F4 Payload 5000KG / 5t payload / lifting load - 2-strand with 2 lifting speeds, lifting height approx. 6m without control bottle, complete with lifting eye and chain storage Complete weight approx. 120 kg, connection to 400V 50Hz Used Condition Item location is 75053 Gondelsheim Knjdsrft Nzjpfx Aniec See pictures

Condition: good (used), Variator pulley, variable speed pulley, variable belt pulley, PIV transmission, variable speed transmission, variable speed pulley, variable pulley, expansion pulley, adjustable V-belt pulley Ksdpfjkahi Rex Anienc -Variator pulley: variator pulley -Outer diameter of pulley: 220 mm -Inner diameter of the opening: 25 mm -Quantity: 1x pulley available -Dimensions: 360/230/H220 mm -Weight: 12 kg

Condition: used, Year of construction: 2015, operating hours: 8,195 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,960 mm, motor manufacturer: VW, gearing type: automatic, fork length: 1,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, UVV, air conditioning, cabin, hydraulic fork positioner, lighting, pallet forks, sideshift, Technical Specifications * Manufacturer: Linde Material Handling * Model: H25D - 02 * Year of Manufacture: 2015 * Load Capacity: 2,500 kg * Operating Hours: 8,195 h * Mast: Triplex * Lifting Height: approx. 4,700 mm * Free Lift: approx. 1,600 mm * Side Shifter and Fork Positioner * Drive: Diesel * Dead Weight: 3,725 kg Equipment: * Air Conditioning * Heater * Lighting according to STVO (German Road Traffic Regulations) * Triplex Mast * Work Lights: 2 front, 2 rear * Reversing Light * Comfort Seat with Seat Heating * Hydraulic Additional Functions: 3rd and 4th Valve * CE Version Condition * Immediately ready for operation * Recently serviced * Next service due in approximately 900 operating hours * Engine and hydraulics are functioning perfectly * Technically in good condition * Optically well-maintained Kedpfx Aoz H Tm Sjnienc Price: 16,900 EUR net, negotiable Inspection and test drive possible by arrangement. Loading and transport can be arranged. If you have any further questions, please feel free to write or call.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 12,595 h, load capacity: 2,000 kg, lifting height: 6,865 mm, free lift: 2,305 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: Electromechanical Condition: Ready for use and fully functional Technical condition: Very good Front tires Type: Superelastic Front tires size: 200/50-10 Rear tires Type: Superelastic Rear tires size: 16x6-8 Battery Volt: 48V Battery Ah: 775Ah Battery manufacturer: Still Knodpfxou D Tbno Anioc Battery type: PzS Battery year of construction: 2017 Description: Incl. charger Sideshift, 3rd valve, 4th valve, Rear working lights, Front working lights, Full free lift, Safety light, Joystick, Rotating beacon, Single pedal, Seat,

Condition: used, empty load weight: 5,200 kg, maximum load weight: 35,800 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 08/2007, suspension: air, tire size: 385/55R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, 1st axle liftable, raise and lower function, ABS (anti-lock braking system), container locking mechanism, U-shaped protection, side aluminum fender, supports. Knodoza Humspfx Aniec Superstructure: Interchangeable chassis trailer for 20/2x20/30/40 foot containers (extendable from 10.9m to 12.5m), 3x 9-ton BPW axles, disc brakes, 1st axle liftable! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 2014, operating hours: 7,007 h, lifting height: 4,850 mm, fuel type: electric, mast type: triplex, battery manufacturer: GNB, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, General information Year of manufacture: 2014 Weights Empty weight: 3.806 kg Battery Battery: 625 Ah, 48 V, Year of manufacture 2014, Brand of battery GNB Functional Lifting capacity: 2.000 kg Maximum passing height: 216 cm Number of valves: 3 CE mark: yes Kodsz I A R Nepfx Anienc Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: triplex = Additional options and accessories = - 3rd valve - Heater = Remarks = = Additional options and accessories = - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: used, axle configuration: 3 axles, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Equipment: ABS, = Additional options and accessories = - ADR - Air Suspension - BPW Axles Knedpfx Aezvduhjniec - Disc brakes = More information = Year of construction: 2009 Tyre size: 385/65 Make axles: BPW Tyre profile: 40% Brakes: disc brakes Suspension: air suspension

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, input voltage: 400 V, overall weight: 168 kg, temperature: 155 °C, Kärcher HDS 10/20-4M Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 200 bar and a flow rate of 1000 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Model: HDS 10/20-4M Supply voltage: 400 V ~ 3-phase Flow rate (l/h): 500 – 1000 Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Detergent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Knjdpfoz E N Enex Aniec Weight (kg): 168 Dimensions (L x W x H mm): 1330 x 750 x 1060 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in detergent tanks allow cleaning fluid to be dispensed directly through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and limescale buildup inside the heating coil and other lines. The exhaust gas temperature sensor shuts down the engine if the temperature exceeds 300°C. When the eco!efficiency function is activated, the unit heats the water to 60°C, enabling effective cleaning—even of heavy soiling—while reducing fuel consumption by approximately 20%.