Used Laminating System for sale (40,930)

Condition: excellent (used), Here, we offer an ETSYSTEM electronic load with GPIB interface. 32615A AC & DC Electronic Load GPIB/RS232, 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, offering an ideal test solution for UPS, AVR, and DC/AC inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series features its own control and display panel and a 5-status recall/memory storage, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measurement device test function provides a quick diagnosis of test results for production and QC test throughput. Features: Voltage, current, power, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory storage. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit display for voltage, current, power, and VA. Suitable for sine, square, and step waves. Width 600 mm, Height 1506 mm, Depth 600 mm 196 kg Fsdpfozd Uh Ijx Aatjpl Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by phone.

Year of construction: 2016, condition: used, Equipment: 1) Cartes GE362VR finishing machine, infeed unit: servo-driven pneumatic 76mm clamping mandrel/expansion shaft, accommodates rolls up to 800mm in diameter or 150kg, automatic electronic web tension and roll diameter control with photocell, automatic stop function at end of material, electronic web guide with ultrasonic sensor for precise web control, splicing table with pneumatic clamps, adhesive tape dispenser, photocell for detecting print marks and any contrast points on pre-printed material, complete servo motor control of the material web, Vetaphone corona treatment system, flexo coating unit, fully rotary operation, equipped with laminating module, rotary flexo coating unit, UV dryer, specification in the source document: 24W/cm / 160W/cm, for laminating, printing or full-surface overcoating/coating, 2) Semi-rotary die-cutting unit with Image Distortion System (IDS) and Air Gap System (AGS): die-cutting system, magnetic cylinder, air-gap adjustment system, semi-rotary and fully rotary gearless die-cutting system, printing plate/die plate thickness range: 0.2-2mm, Image Distortion System (IDS), 3) Air Gap System (AGS), 4) outfeed unit, web control, complete servo motor control of the material web, slitting unit, 10 pivoting razor blades with lateral adjustment, additionally 8 knife/counter-knife cutting groups for longitudinal slitting, rewinding shafts, first rewinding shaft, independent servo-driven pneumatic 76mm expansion shaft, for rolls up to 800mm or 150kg, automatic web tension control, direction of rotation: clockwise/counterclockwise, with documentation. An on-site inspection is possible. Fpodpfx Aozy Rv Tsatsl

Condition: ready for operation (used), functionality: fully functional, A good used barcode verification system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line (label applicator was removed and sold) - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required - setup currently for EAN 13 Barcodes and has Teach facility built in for new barcode or changeover Conveyor could also be used for Ink Jet Printing of underside of packs Could be refitted with your own label applicator also - mounting boss still in place for original Pago Applicator Single phase 240Volt AC supply Fjdpfx Aajwufb Astjpl Ready to ship worldwide

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, LiSEC – PKL, SBL, ATL, LBR, GFB-60/30 RE-S, VB-45 Float (Low-E) and Laminated Glass Cutting Line with mobile overhead crane (gantry) with rotating suction frame for automatic pick-up of large-sized glass sheets (jumbo) and automatically movable shelf rack storage systems (LBR). Construction year: 2008 Max. glass size: 6000 x 3210 mm In good condition. Inspection is possible by appointment. Fpjdpfxjy Rulie Aatjl Available: NOW

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Fedov Da Dlspfx Aatjpl - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation

Condition: excellent (used), Now in stock at Glendale we have this GMP QTopic 380 Laminator with Foiling/Sleeking rewinder. Having been within a small digital implant, this laminator has had little use. The laminator is in perfect working order and includes the air compressor and foiling unit. Raising ordinary print work to 'extra-ordinary'.GMP QTopic 380 has been developed to meet specific print finishing requirements and built to exacting technical standards – with fully controllable pressure and heat processes, devised to deliver optimum results with today's digital print output. The GMP QTopic 380 offers pneumatic pressure which is required to get a great finishing when laminating and/or foiling is required. The pneumatic pressure is supplied by the integrated silent air compressor housed in the Qtopic 380 stand. This semi-automatic system is hand feed with automatic sheet separation. Capable of working at speeds up to 10 metres per minute the QTopic 380 can laminator over 1300 SRA3 per hour. Fpedpowi T Tvjfx Aatel Turnaround times and waste are further minimised with the unique 'burst separation' system. The laminating film is micro-perforated on the edge by the robust marking device and then separated by the pneumatic burst roller. This easily separates the laminated sheets prior to the actual edge of the media, leaving clean and square datum edges from which to measure, cut, fold or guillotine. Faultless lamination. Class-leading lamination for the commercial and digital printer. Using state-of-the-art technology, combined with integrated pneumatic pressure, the QTopic 380 delivers superior bonding and faster production times – compared to standard systems. In addition, the fully adjustable heat and pressure combinations enable a wider range of laminates to be used with litho or digital printed media. Stunning foiling. For today's printers who demand stunning results with that extra ‘wow’ factor – the GMP QTopic 380 delivers more than just class-leading lamination. Metallic, coloured, patterned or holographic style foils can be added to digitally printed materials in either spot or flood treatments. This decorative effect traditionally would involve costly custom die production to create these effects. However, the QTopic can deliver instant and affordable results - and with upgraded pneumatic pressure, an even wider choice of media is now suitable for great results! Specifications Manufacturer GMP Model QTopic 380 Year 2021 Condition Refurbished Stock Number 114941 Laminating speed 1.5m to 10m/min Paper weight 110-400gsm Warm up time 5 minutes Laminating temperature up to 150° Temperature control Touch screen Speed control Touch screen Roller pressure Pneumatic Film core (mm / inches) 77mm 3" Electrical requirements 220/240v 50/60Hz Machine weight 187kg Dimensions L2010mm x W710mm x H1475 - all when in use

Year of construction: 2016, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Fpjdoyw Tmlepfx Aatjl Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor Bobp Ergeyw Tmlocyodf 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Year of construction: 2024, condition: new, The OASI.S (Open Automation Systems Integrator Server) robotic material handling system for the automatic loading and unloading of IV bags and trays. This system is designed to transport filled IV bags from the cleanroom, load and position IV bags into trays using a pick-and-place robot, stack trays on a pallet, and move pallets of empty trays to and from cells. The system consists of connecting conveyors, a clean station with a delta robot, a robotic loading station (delta robot and 4-axis robot), and an unloading station (2 x 4-axis robots). The line includes: - 3 x FANUC M-410iC/315 robots, serial numbers: R24500486, R24500487, R24500488, manufactured in 2024 - FANUC M-3iA/6S delta robot, serial number R244001FB, manufactured in 2024 Fodszx Aldepfx Aatjpl - FANUC M-2iA/3SL delta robot, serial number R2430075E, manufactured in 2024 The individual robot cells are equipped with dedicated grippers, four Buuusch MM 1104 B V03 TNXX pumps, conveyor feeders, additional electrical cabinets, and many other accessories.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW Fodpfjzpy Idsx Aatepl External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 415 V, We offer this used Autobond MINI 76 TH laminating machine, year of construction 2015. Machine type: MINI 76 TH Serial number: Voltage: 380-415 V Phase: 3 ph Power: kW Year of manufacture: 2015 Impressions: 22 mil Water heated Chrome Cylinder Fodjzu Sqnepfx Aatopl Optional Post heat system available. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, axle configuration: 3 axles, first registration: 07/2013, loading space length: 10,200 mm, loading space width: 2,500 mm, loading space height: 1,500 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2013, Equipment: crane, Tyre size: 385/65R22,5 Suspension: air suspension Rear axle 1: Steering Drive: Wheel Fodouc D Uaspfx Aatjpl Empty weight: 14.070 kg Carrying capacity: 27.930 kg GVW: 42.000 kg Mast: telescopic (3 parts) Make of bodywork: PALFINGER PK 24001

Condition: used, Year of construction: 2006, operating hours: 18,625 h, machine/vehicle number: LC598, Used aseptic line for tretra pack fino 1 L - 3600 PPHTechnical Specifications & Performance DataThis complete Tetra Fino Aseptic line is an integrated aseptic packaging solution engineered by Tetra Pak for liquid food applications. The core filling machine was manufactured in 2006 and is complemented by downstream packaging equipment. Designed for industrial packaging and beverage production, it provides reliable second hand performance with hygienic processing and efficient material handling.Production speed: up to 3,600 packages/hourContainer type: Carton-based aseptic packages (Tetra Fino Aseptic family)Supported volumes: 1.0LPrimary product currently run: MilkMain filler year: 2006Additional module: SOCO System unit, year 2014Accessories: Trolley for packing with roll holder, ABC valve, 1 m mesh conveyorAdvanced Automation & Control SystemsThe line incorporates an industrial control panel for central operation of filling and downstream handling. The aseptic filler integrates automatic process sequences for sterilization, filling, and sealing under controlled conditions. Operator safety interlocks and machine guarding support safe operation, while standardized HMI navigation streamlines recipe selection and format changes. The architecture is designed for fast restarts and consistent uptime in high-demand environments.Production Line Integration CapabilitiesThis used bottling line is configured for inline operation, linking the aseptic filler with conveyors and a SOCO System packaging module. It supports integration with typical ancillary devices such as product dispensers, cap or straw applicators, and end-of-line packaging machinery. Format changeovers accommodate multiple carton volumes within the 0.2L to 1.0L range, enabling multi-product flexibility for milk and juice production. The conveyor layout ensures smooth product transfers and balanced accumulation between stations.Machine Condition & Maintenance HistoryThe equipment is reported in production with overall good condition. Continuous operation on milk indicates stable performance and consistent hygiene compliance. The 2006 filler and 2014 downstream module are maintained to sustain aseptic integrity and packaging quality, making this second hand industrial packaging line a strong candidate for rapid redeployment.Operational Performance & VersatilityOptimized for liquid food, the line supports aseptic packaging of products such as milk and juices in pillow-style Tetra Fino Aseptic formats. Key benefits include extended ambient shelf life without preservatives, high barrier multi-layer materials, and hermetic sealing. The layout offers reliable filling accuracy, gentle product handling, and quality consistency suitable for beverage production requiring long shelf life and stable logistics.Installation Requirements & Site PreparationThe system is designed for standard industrial facility layouts with room for filler, conveyors, and a compact end-of-line module. Typical utilities include electrical power, compressed air, and process water as required by aseptic operations. A clean, controlled environme... Fsdpfsyh E Apex Aatspl

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2007, total length: 13,670 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,000 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes Fpedpfx Aaezvdrtjtol = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.920 kg Carrying capacity: 34.080 kg GVW: 42.000 kg Identification Registration number: OK-21-BL

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. Fpodpjyxxxvsfx Aatsl The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: used, Year of construction: 2011, functionality: fully functional, Auriga 60 Computer-Controlled FE-SEM with patented GEMINI® electron optics and field emission cathode, designed for analytical applications and high-resolution imaging under high-vacuum conditions. Year of manufacture: 2011 FIB column type: Cobra FIB column SEM column type: Schottky field emitter Installed detectors: • SESI (commercial) • InLens • ESB • 4QBS (pneumatic) • STEM (pneumatic) • EDX X-MAX 80 mm (Oxford) • EBSD (HKL Channel 5) • Charge compensation Gas injection system: Platinum Maintenance report: The system has been serviced annually, with a service report provided each time. Operating hours: 13,290.33 hours (with current filament) PC and software included: Yes Included components: All pumps, cooling systems, and control units are included, except for the dampers. Software Version: • SEM: SmartSEM Version 6.00 (June 9, 2016) • EDX: INCA software package – Version 5.03 Price: Negotiable price excluding VAT and delivery Fpedpszz H I Iofx Aatol

Condition: new, Year of construction: 2026, functionality: fully functional, Our StoStack 5000 is designed for high-performance stacking operations with medium to high throughput. The system processes up to two packages simultaneously, with a maximum length of 8 m, and offers a cycle rate of up to 30 pieces per minute without any air gap. Optionally, the machine can be equipped with an automatic spacer insertion system. This eliminates the need for an operator to insert spacers, which is particularly advantageous for integration into automated production lines. Adjustable uprights, a touch display, and extensive options for safety and automation make the StoStack 5000 a flexible solution for modern production environments. Fpodpfxjtv E D Us Aatel Applications: Stacking of boards Stacking of laminated timber Stacking of planed timber Stacking with/without air gap Stacking with/without intermediate spacers The advantages of the system at a glance: Fully automatic, flush stacking Fast, continuous process Precise positioning and rapid movements Simple operation via touchscreen Robust construction No pneumatics, therefore unrestricted operation even in freezing temperatures Data from timber measurement for subsequent invoicing Options: Board ejector for variable board widths and air gap (optimal for drying) Alignment rollers for longitudinal alignment of timber Ejector for removing defective boards Electrically adjustable side supports Mobile machine frame: deployment at multiple workstations by moving the machine on rails or with a forklift Technical data: Flexible stacking width: up to 1200 mm Stacking height: up to 1200 mm Board length: from 1500 mm Board/post width: 50 – 300 mm Board/post height: 15 – 120 mm Maximum board/post weight: 75 kg Maximum layer weight: 500 kg Cycle rate: up to 25 pieces per minute

Condition: excellent (used), Year of construction: 2018, Complete workshop, machinery for window production Conturex Weinig window production line Scm DMC sanding machine SY TM 1650 SCM Record 240 NT Weinig mortise and tenon press Laminated timber press Veneer press OMC Frame press Casolin Fedpfjzx Ti Hox Aatepl Edge profiling machine SCM Painting system / spray booth Table saw Felder Table circular saw Felder Double miter saw Stop tables Ruchser Mullion machine Stegherr Sanding machine Kundig Sanding machine Löwer Drilling machine Ganner Dust extraction system Mion Mosole and many other machines

Year of construction: 1970, condition: ready for operation (used), A complete extrusion line with a Reifenhäuser extruder and a gravimetric system Plast-Control (2006) is available. 1) Unwinder 1. 2) Primer unit and hotmelt unit for water-based adhesive lamination. 3) Dryer. 4) Unwinder 2. 5) Dolci extruder for extrusion lamination. 6) Unwinder 3. 7) Two printing units with additional dryer. 8) Extruder Reifenhäuser. 9) Rewinder. 10) Guide roller in the basement. 11) Web guiding under unwinder 1 in the basement. 12) 2x resin silos in the basement. This is a complete extrusion line with peripheral equipment. Documentation available. An on-site inspection is possible. Fpodpfxsw R Dhro Aatel

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Compact industrial footprint Fpsdpfoyxp Nxjx Aatel Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Condition: repair required (used), Year of construction: 2013, functionality: not functional, machine/vehicle number: AW016804, A-WARD UO20 CONTAINER TILTING SYSTEM, designed for the safe and efficient handling of 20-foot ISO containers in bulk material handling operations. The equipment allows for hydraulic tilting of the containers from 0° to 90°, facilitating the quick loading or unloading of bulk products such as scrap metal, minerals, grains, or other loose materials. • Type: container tilter with universal frame • Application: loading/unloading of 20-foot ISO containers • Tilting range: hydraulic tilting from 0° to 90° • Operation: self-contained hydraulic system with remote control • Status: available for sale • Condition: available for inspection The system improves safety, productivity, and loading efficiency by enabling controlled gravity-fed handling of bulk materials directly within the containers. Remarks: Fodpfozbtu Ajx Aatspl The unit is sold in its current condition. It is missing hydraulic hoses, and the weighing system is not operational.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, For sale: SMAG E-CUT S 330, a robust, versatile, and high-productivity roll-to-roll label finishing system. Designed for digital and conventional printing lines seeking flexibility, precision, and premium value-added finishes. This equipment is ideal as a complement to digital presses, enabling lamination, die-cutting, slitting, and rewinding in a single workflow. -> General data: - Model: E-CUT S 330 - Year of manufacture: August 2012 - First installation: February 2013 - Maximum web width: 330 mm - Maximum unwind roll diameter: 700 mm - Maximum speed: up to 35 m/min -> Configuration and Units: - Unwinder with ultrasonic web guide - Fully rotating flexo station - Lamination unit - Semi-rotary die-cutting with Z 160 magnetic cylinder - K&B GapMaster for precise adjustments - Corona treatment for improved adhesion - Longitudinal slitting unit with up to 10 knives - 2 rewinders - Matrix rewinder -> UV System: In 2017, an air-cooled Phoseon UV-LED lamp was installed, improving energy efficiency and reducing maintenance. -> Key strengths: - High industrial productivity and reliability - Great versatility for both digital and flexo jobs Fpjdpfx Aasyapy Estjl - Precise and stable die-cutting - Ready for a wide range of materials - Ideal for short to medium runs with quick job changeovers -> Equipment condition: - Machine in good working order, well-maintained and operational. - Available for inspection and testing without obligation. Reason for sale: Restructuring / change in production strategy.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles Fodpeyzh Ulefx Aatjpl consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: used, axle configuration: 2 axles, first registration: 04/2016, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2016, Equipment: tail-lift, Axle configuration Tire size: 385/65 R22.5 Axle brand: BPW Brakes: Disc brakes Rear axle 1: Lift axle; tire tread depth left: 2 mm; tire tread depth right: 8 mm; suspension: air suspension Rear axle 2: tire tread depth left: 6 mm; tire tread depth right: 2 mm Weights Fpsdezxlkispfx Aatel Unladen weight: 9,350 kg Payload: 23,650 kg GVW: 33,000 kg Functional Tail lift: Dhollandia DHLM.30, 3000 kg Condition Damage: none

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Fjdpjzv S Rwefx Aatjpl Further information available upon request

Condition: excellent (used), Brand new / Showroom machine Automatic roll-fed encapsulation laminator with auto-feed, lamination, and cutting in one process Technical Specifications: Max. Laminating Width: 11" (279 mm) Laminating Speed: 39 inches per minute (approx. 99 cm/min) Maximum Output: Up to 240 sheets per hour Film Thickness Range: 1.5 to 5 mil Feeder Capacity: Up to 200 sheets Fodpjwrpd Nsfx Aatepl Power Requirements: 110 V Controller: Digital panel Dimensions (W × L × H): 24" × 19" × 18" (approx. 610 × 483 × 457 mm) Cooling System: Included Stand: Optional Sleep Mode: Activates after 10 minutes Key Features: Compact design fits office or school environments One-button start; stops automatically when job is complete Up to 3x faster than pouch laminators Easy top access for quick cassette changes Integrated internal rotary cutter for safety Digital panel for setting margins and sheet count Film cassette lifts out for easy replacement Ideal for schools, offices, and print shops