Used Lateral Labeller for sale (3,234)

Condition: used, Year of construction: 2022, Overview Complete PET bottling line for still mineral water in 6.0 L PET bottles with handle, max. 6,000 bottles/h. The heart of the line is an SMI ECOBLOC ERGON blow moulder-filler-capper combiblock, followed by handle application, rotary labelling and robot palletizing. Built in 2022, started up in 2023 and run only 3 to 4 times a year. Hjdpfx Ahez Ag U Dj Sent Technical data - Year of manufacture: 2022, start-up 2023 - Capacity: max. 6,000 bottles/h - Product: still mineral water - Container: 6.0 L PET bottle, single bottle with handle and EAN barcode - Preform: 100% rPET, 86.5 g - Closure: 48/41 cap - Pallet: Euro pallet Scope of Delivery - Blow moulder-filler-capper combiblock | SMI | ECOBLOC ERGON 6-20-5 HC EV | blow moulder for 6 moulds (moulds not included), filler with 20 filling valves, capper with 5 capping heads, cap sorter and cap elevator | 2022 - Discharge conveyor | SMI | bottle conveying from the combiblock | 2022 - Accumulation table | SMI | FIFO | for filled bottles | 2022 - Bottle divider | SMI | DV 500S ERGON | 1 lane in, 2 lanes out | 2022 - Drying tunnel | EUROPOOL | before the handle applicator | 2022 - Handle applicator | TWINPACK | double lane, with barcode applicator | 2022 - Drying tunnel | EUROPOOL | before the labelling machine | 2022 - Bottle combiner | SMI | 2 lanes in, 1 lane out | 2022 - Conveyor | SMI | from the accumulation table to the labelling machine | 2022 - Rotary labelling machine | P.E. LABELLERS | ROLLMATIC MODULAR TOP SL 960 10T | 2022 - Conveyor | SMI | from the labelling machine to the palletizer | 2022 - Palletizer | BEMA | 2 FANUC robots, interlayer device | 2022 - Electrical panels | main distribution panels with all components for all machines and conveyors | 2022 - Format parts and spare parts | all available format and spare parts Not included Pressco preform and neck inspection, Heuft fill-level and cap inspection, pallet wrapper, preform and cap feeding from the pallet tipper to the hoppers, high-pressure compressor for the blow moulder, low-pressure compressors, utilities, piping and wiring from the main distribution to the machine panels, civil works. Condition As-new condition, low operating hours. Annual preventive maintenance by the OEMs plus regular in-house maintenance. In production until the end of April 2026 and still installed; dry run on request, inspection by appointment. Electrical and mechanical drawings, PLC programs with backups, service and maintenance manuals and spare parts books are included. Availability From October 2026; the line must be dismantled by the end of October 2026. Dismantling, packing and truck loading can be arranged on request. Location: France.

Condition: used, Year of construction: 2011, Cold glue labelling machine for applying paper labels to glass bottles. Additional title: Neck-, body- and back-labeling for bottles Capacity: 4500 bottles/h Hnsdpsztwyxsfx Ah Sjt Power: 6 kW Voltage: 400 Volt Frequency: 50 Hz Compressed air: 6 bar; 120 l/min Formats: 0.33 l longneck, 0.5 l Euro, crown cap, and 0.5 l, 0.75 l swing-top bottles Running direction: from right to left Operation / Control: Control cabinet with control buttons, automation with Siemens Simatic S7-300

Condition: ready for operation (used), Year of construction: 2019, A cold-glue labeling machine Gernep is available. Direction of travel: LM, nominal output: 5000bottles/h, control range: 1000-5500bottles/h, gluing height: 330mm, bottle format height range: 297mm-350mm, bottle format diameter range: 74mm-89mm, bottle material: glass, bottle volume: 0.75/1l, bottle content: wine, application: body/neck ring label/back label. Cold-glue format 1: label length range: 25mm-160mm, max. label height: 150mm, max. label height bottom edge/top edge: 15mm/320mm. Cold-glue format 2: min. label length: 25mm, max. label height: 115mm, max. label height bottom edge/top edge: 15mm/130mm. Including dating, optical orientation, upper-part height adjustment, glue pump and two cold-glue units. Documentation available. An on-site inspection is possible. Hnsdpfx Ahey N Ddxo Sot

Condition: good (used), Year of construction: 2022, Labeling machine with maximum label width of 120 mm, suitable for plain packages and tags, 2 label dispensers, speed 60 m/min. Hedpsx Rp E Rsfx Ah Sjnt

Condition: like new (used), functionality: fully functional, Year of construction: 2024, overall weight: 160 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,930 mm, input voltage: 230 V, input frequency: 50 Hz, laser wavelength: 10,600 nm, type of input current: AC, laser type: CO₂ laser, Equipment: lighting, With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. The LAS 28 laser model can optionally be equipped with a rotary axis (3-jaw chuck) for labelling cylindrical parts. Other options, such as lateral cantilevers for labelling long parts, can also be realised. 30W CO2 laser (optional: 60 W) - Wavelength 10640nm - marking field size 220x220 mm - optional: rotary axis (3-jaw chuck) - optional: exhaust system (incl. activated carbon filter) - optional: extension arm for large workpieces (also on both sides) - marking software EZCAD in German / English - Pilot laser (simple preview) - focus finder (easy focus adjustment) - max. part height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with operating system Windows - frame made of aluminum profile - air cooled - door width approx. 720mm / door height: 400mm - Connection 230V - Dimensions: approx. 1000 x 800 x 2000 mm (LxWxH) Hnsdpfx Aswkpyhsh Sjt - Weight: approx. 140 Kg

Condition: ready for operation (used), Year of construction: 2020, A Labelling Machine E-Packaging S.r.l. for bottling lines, including a printing system, is available. Max. Speed: 20m/min, label length: 500mm, label width: 10-140mm, product height: 30-150mm. The machine was stored and not used, has therefore not been serviced, no known defects, documentation available. An on-site inspection is possible. Hedeuxdhnjpfx Ah Ssnt

Condition: ready for operation (used), Year of construction: 1984, A cold glue rotary labelling machine Krones is available. Product: wine, bottle formats: 0.75l/1l, labelling capacity: 10000 bottles/h. Includes all format parts and spare parts. Documentation available. An on-site inspection is possible. Expected to be available from February 2026. Hodpfew H Avhsx Ah Ssnt

Condition: used, Rotary labelling machine for bottle labelling using two cold glue stations. Manufacturer: KRONES Model: BONAMATIC Year of manufacture: 1994 Capacity: up to 10,000 bottles/h Carousel: 12-station Configuration: 2 x cold glue label heads Hjdeywciijpfx Ah Sont Operating hours: 31,526 h Original electrical documentation. Technical condition: Used machine, condition as shown in the photos.

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Hsdpfx Aszlgf Ieh Sjnt Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,600 mm, total length: 4,400 mm, total height: 1,540 mm, type of input current: three-phase, Labeling machine for round containers, spot or wrap around. 1 label station, max label height 130mm. Roll-on unit 80mm height. Push plate 120mm height. Machine is tested and in working order. Hedpfx Ajxnk Ifsh Ssnt

Condition: used, Year of construction: 1987, Labelling machine for applying neck, body and back labels to glass bottles. Additional title: with two glue aggregates Nominal capacity of filler: 15000 b/h Hjdpjztyy Iefx Ah Sjnt Formats: breast-, body-, back-label / crown cap: 0,5 l-NRW-bottles, 0,33 l-Longneck-bottles / screw cap: 0,5 l-NRW-bottles Running direction: left -> right Features: 2 glue aggregates

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,100 kg, Additional Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without edge reinforcement, the loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with a stainless steel plate at the bend as a cable guide - flush with the floor. For trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm Trailer hitch Trailer hitch ball head D24.8:, trailer load 2,800 kg, incl. mounting and electrical system with 7-pole socket Accessories/Conversions 2 holders for wheel chocks, aluminum side impact protection, foldable - to be taken over from the truck! Steel under-run protection, quarter-shell mudguards with mud flaps - to be taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 1 bracket for 3 x petrol cans 1 stainless steel storage box, w=600/h=400/d=500 mm, with a polished door, incl. lockable, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing collars on the back (splash-proof according to technical possibility) Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front panel switched via parking lights with a switch on the front panel, outside on the front left, 1 LED work light, at the rear, with integrated rear view camera Incl. with color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage converter 24/12V, 1 7-pole 12V socket = adapter plug Floor Mega Grip made of interlocking, galvanized grating, steel grating 50/4 Incl. with a mesh size of 50 mm. Top side with anti-slip interlocking, running continuously over the entire main frame platform Tie-down rings 12 pairs of tie-down rings in the outer frame, freely pivotable - 10 tons each. 1 x at the very front and the last one at the very back. 1 tie-down ring at the very back in the middle for attaching the winch cable 12 tie-down rings recessed in the middle of the floor, 5 tons each Front panel Front panel made of steel sheet, height 1,500 mm. Fixed with corner pillars at the height of the front wall. 2 x 12 lifting brackets for tie-down chains, mounted on the left and right on the front panel Winch Electric winch, 24 volts, pulling force approx. 6350 kg, mounted in the middle on the front panel, operated with a remote control, cable length min. 35 m x 9.5 mm, with cable window, Hnjdpfx Asi Riytsh Sjt with cable pressure plate, incl. overload protection, cable free-running coupling, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating instructions Ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair, electro-hydraulically foldable and laterally movable - incl. electro-hydraulic pump unit. Ramp angle approx. 8° with the rear axle lowered Ramp support made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 lashing straps. Ramp tip offset (nose min. 150 mm) suitable for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support legs, foldable at the rear + length adjustable,

Condition: ready for operation (used), Year of construction: 2011, A Heuft rotary labelling machine is available. Throughput: approx. 36000bottles/h, labelling stations: 2, machine pitch: 120mm, carousel diameter: 1150mm, machine dimensions X/Y/Z: approx. 2500mm/2300mm/2500mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Hnjdozmh T Aspfx Ah Sst

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: Seriennr. 158440; Masch. Nr. 407100, overall weight: 3,800 kg, controller manufacturer: Schunk, control cabinet width: 1,000 mm, control cabinet height: 200 mm, input voltage: 400 V, input current: 32 A, repeat accuracy: 8 mm, warranty duration: 12 months, pallet spaces: 6 euro pallets, control voltage: 24 V, measuring range X-axis: 3,100 mm, measuring range Y-axis: 3,300 mm, measuring range Z-axis: 1,600 mm, Schunk palletizing robots are used to place our packages on Euro pallets. The robot has 6 stations, where pallets can be changed/exchanged during operation. A production stop is not necessary. The robot is designed for package sizes of 30 x 40 x 10 cm (8 packages per layer). To ensure the stability of the pallets, cardboard sheets can be inserted between the layers. The intermediate layer sheets are stored on a single sled, so that all six stations can be filled with packages. Dismantling and loading are organized and handled by the buyer. Hjdpfxey S Ak Ne Ah Sjnt

Condition: ready for operation (used), Year of construction: 1987, A Krones rotary labelling machine with neck band is available. Labelling method: cold glue, containers: wine bottles/sparkling wine bottles, max. labelling capacity: 7000bottles/h, machine dimensions X/Y/Z: approx. 1650mm/1250mm/1700mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Hsdpszmh Srjfx Ah Sjnt

Condition: used, Rotary labelling machine for labelling bottles using two cold glue stations. Manufacturer: KRONES Model: PRONTOMATIC Year of manufacture: 1991 Capacity: 10,000 bph Carousel: 12 stations Configuration: 2 x heads for cold glue labels Original electrical documentation. Hnedpoywckgsfx Ah Sst Technical condition: used machine, condition as shown in the photos.

Condition: used, Year of construction: 2024, functionality: fully functional, total width: 3,000 mm, total length: 2,000 mm, total height: 2,200 mm, type of input current: three-phase, input voltage: 400 V, We are offering this used Herma 152M LC labelling system, year of manufacture 2024. Type: 152M LC Machine number: 80004331 Year of manufacture: 2024 Hedpfxjy Ah D Nj Ah Sont If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2012, Rated output: 5000bottles/h, running direction: LM, control range: 1000-6500bottles/h, bottle material: PET/glass, bottle format volume: 200ml/250ml/400ml/500ml/750ml/1000ml/1200ml, glass bottle height range: 59mm-121mm, glass bottle diameter: 65mm/70mm, application: neck ring label/body label/back label/wraparound label. Including three self-adhesive dispensers, height adjustment, central lubrication, breakage detection, bottle counter, clamp stars, swivel arm and Etima hot glue for Rollina and neck ring. Documentation available. An on-site inspection is possible. Hnodoy N Dd Sjpfx Ah Set

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this used Durfo D1Z labelling machine, year of manufacture 2015, for self-adhesive bottle labels with inkjet printer for, e.g., best-before date or batch number on the label. Hodpfeym Sppsx Ah Sont Model: D1Z Year of manufacture: 2015 Serial number: AB1699E Operating voltage: 400 V Number of phases: 3 Frequency: 50 Hz VIDEO available on request! If you have any questions or require further information, please send us a message or call us.

Year of construction: 2021, condition: used, functionality: fully functional, Automatic Label and Sticker Roll Cutter Plotter VD 320 III Very lightly used The device is equipped with 4 cutting heads Integrated web guide roller system ensures precise web alignment throughout the entire cutting process Electromagnetic (powder) brake on both unwind and rewind units guarantees constant tension; electronic adjustment Cold lamination with adjustable film-to-web registration Capability to cut and separate into individual pieces Vacuum table for web splicing during roll change – minimizes material waste Matrix rewinder Hodpexw Uqvofx Ah Sjnt Touch screen TECHNICAL SPECIFICATIONS: Feeding type: roll-to-roll / optional guillotine for roll-to-sheet Max. knife working area: 320 x 400 mm Max. roll diameter: 450 mm Roll width: 40–340 mm Label cutting speed: 6 m/min (for 10 x 10 cm size) – speed depends on label type and shape Slitting speed into bobbins: up to 80 m/min Cutting accuracy: 0.2 mm Supported file formats: PLT Bobbins width: 10–330 mm Supplied with manufacturer's software Compatible with graphic files from Corel Draw and Adobe Rotary blade type: tungsten steel Power supply: 1~, 230 V/50Hz Dimensions: 158 cm x 90 cm x 136 cm Machine weight: 450 kg

Condition: ready for operation (used), Year of construction: 1995, operating hours: 1,000 h, functionality: fully functional, Glue labeling machine Hnjdsq H Axiopfx Ah Sjt for one label Various magazines available for different labels hourly output approx. 2000 bottles Bottle stars for approx. 90mm diameter installed

Year of construction: 2022, operating hours: 6,123 h, condition: used, functionality: fully functional, machine/vehicle number: 20-22-004, Like new, hardly used. Hedpfjziaqfex Ah Sent

Year of construction: 2022, condition: excellent (used), Weber Compact CC Labeller Applicator Complete with controller Year - November 2022 Hodpfjtq E Rkjx Ah Sjnt In excellent condition

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine Hnjdpfxezmd Uij Ah Set AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Data / Features: Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Hedpszkucfjfx Ah Sont Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Completely overhauled Function tested Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Inspection and testing possible by appointment. Errors and prior sale excepted.