Used Leadermac Smartmac Lmc-423S for sale (98)

Condition: new, maximum load weight: 92,045 kg, overall weight: 1,26,000 kg, axle configuration: > 3 axles, Equipment: ABS, Excerpt from the equipment list Complete equipment upon request * 1 x Gooseneck MAX710-Neck-V-30-2.70 * Gooseneck with hydraulic lifting/lowering and extendable function * Length approx. 3,650 mm. For SZM 6x4 or 8x4 * Steel front panel, approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Incl. gantry for suspending the supply lines * The SZM tank must contain at least 80 l with MAX trailer couplings, otherwise the customer must provide the couplings ex works * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * TPMS tire pressure monitoring system * Two toolboxes INOX, approx. 855 x 340 x 390 mm, on the gooseneck, left and right (± 48 kg) * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Hydraulic connection lines between the power pack and the connection plate on the gooseneck * Radio remote control: operation of the power pack, start/stop of the diesel engine * Operation of the trailing axle, in addition to the cable remote control * with 2 LED indicator lights on the receiver for single-lane operation * Operation of raising/lowering the gooseneck * Operation of raising/lowering the suspension of the axle assemblies * Multicoupling hydraulic connections on the gooseneck * 1 LED work light, left and right, on the rear panel of the gooseneck, with separate on/off switch * Four warning boards, extendable by ± 2,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting for a rotating beacon. (± 122 kg) * 1 x 3-axle compact front axle * MAX710 axle PA-F-3-19.5-1.36-2.85 * Hook connection at the front and rear * Length: approx. 3,560 mm * Axle width: approx. 2,850 mm * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication system for a 3-axle axle assembly with standard grease NLGI-2. * A 7-pole socket, left and right, at the rear of the front axle for the warning boards * TPMS tire pressure monitoring system according to ECE R 1411 * LED work lights, left and right, at the rear of the front axle with a separate on/off switch * Surface of the front axle with a sand-coated paint finish for slip resistance * Multicoupling hydraulic connections on the front axle * 1 x Low loader bridge: MAX710-Low-loader-BB-A-7.15-(430)-2.85 * Telescopic low loader bridge BB-A with drivable bridge hooks at the front and a bolt-on coupling at the rear * Basic width: approx. 2,850 mm Length: approx. 7,150 mm * Beam height: approx. 430 mm Beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm Fjdpfx Aszzhfnep Dspn * 6 pairs of steel chequered plate with rubber matting approx. 1,000 mm, 1 pair approx. 500 mm (± 1,660 kg) * Possibility to screw in (ø approx. 40 mm) every approx. 500 mm on the outside of the top chord of the outer tube of the low loader bridge for screw rings (LC 16,000 daN) * Possibility to screw in M30 every approx. 1,000 - 1,200 mm on the outside of the inner tube of the low loader bridge for mounting screw rings (LC 10,000 daN) * Folding widening extensions with steel chequered plate, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * TPMS tire pressure monitoring system * Pair of loose HeProLen plastic wheel chocks with climbing strips approx. 1,200 x 450 x 50/400 mm. (± 130 kg) * 2 pairs of screwable lashing rings M30 (LC 12,000 daN). (± 13 kg) * Ce

Condition: used, Year of construction: 1997, Control Heidenhain TNC 407 serial number 60/1997 Fpsdpfxsumyhrj Ap Don x-travel 1.000 mm y-travel 600 mm z-travel 700 mm TISCHMAß: 1300 X 600 mm Werkzeugwechsler: 24- fac

Condition: new, neu 050233 Jänner 2027, Zwischenverk Taiwan 87870 € 1660.74 € 1015 mm 600 mm 1000 x 400 mm 1000 x 400 mm 670 kg 1100 mm 5 - 25 m/min 0 - 2.250 mm/min mm 450 mm 440 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 2.000 1/min 5,5 kW 1.5 kW 1.1 kW 1.1 kW 3630 mm 2682 mm 2200 mm 4400 x 2300 x 2400 mm 4800 kg 423 kg 670 kg 355 x 50 x 127 mm 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working area 1 grinding wheel 2 grinding wheel flanges grinding wheel balancing stand balance arbor LED machine lamp machine and equipment according to the CE-regulations Fedpfowircijx Ap Dspn user manual in GERMAN and ENGLISH

Condition: good (used), functionality: unexamined, overall weight: 90 kg, input voltage: 240 V, input frequency: 60 Hz, type of input current: AC, Used Shimadzu Turbo Molecular Pump TMP H3135LMC with TMP Power Unit (EI-C3153M) Magnetic Bearing Manufacturer: Shimadzu Corporation Model: TMP-H3153LMC (S3) + EI-C3153M (S3) Fpedpfsv Dfyrex Ap Den Max RPM: 24000 Voltage: ~200-240V (50/60Hz) VA: 1.5K Total Weight: ~ 90kg (ex pallet)

Condition: good (used), mileage: 73,083 km, power: 118 kW (160.44 HP), first registration: 11/2022, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 6,950 mm, total width: 2,150 mm, total height: 3,150 mm, loading space length: 4,140 mm, loading space width: 2,090 mm, loading space height: 2,240 mm, Year of construction: 2022, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Rear view camera - Lane keeping assist - Fabric = Notes = Configuration: 4x2, twin tires, unladen weight: 3077 kg, gross vehicle weight: 3500 kg, type of cab: single cab, cruise control, air conditioning, number of airbags: 1, parking assistance: None, electric windows, electric mirrors, radio/cassette, Carplay, color: white, heated mirrors, rear view camera, lighting type: halogen lamp, lane keeping assist, air conditioning, Bluetooth, engine power: 118 kW (158 hp), engine capacity: 2998 cc, fuel: diesel, Euro: 6, drive technology: timing chain, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, roof rack: None, side doors: 1, rear closure: tail lift, central locking, number of seats: 3, seat arrangement: 1+2, seat cover: fabric, seat adjustment: manual, tail lift, tail lift design: tailgate, tail lift load capacity: 750 kg, tail lift manufacturer: Sorensen, tail lift material: steel and aluminum, tail lift size: 211 x 145, box van with tail lift 3.0L twin tires sliding door spoiler Euro6 CarPlay 156 hp!, spare wheel, tire type: summer tires = Additional Information = General information Number of doors: 1 License plate: KLEYN1 Axle configuration Tire size: 195/75R16 Brakes: disc brakes Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm; Suspension: trapezoid suspension Axle 2: Twin tires; Tire tread depth left inner: 4 mm; Tire tread depth left outer: 4 mm; Tire tread depth right inner: 4 mm; Tire tread depth right outer: 4 mm; Suspension: leaf spring suspension Weights Unladen weight: 3,077 kg Payload: 423 kg GVW: 3,500 kg Fpedpfx Apezpd Nxe Dsn Functional Tail lift: Sorensen, tailgate, 750 kg Height of loading area: 88 cm Maintenance APK (periodic vehicle inspection): valid until 11.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial information Leasing price: 496 € per month (delivery van, 72 months); ask for more information and conditions.

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 550 x 560mm, Table 1250 x 660mm, workpiece load 1,000kgs Spindle speed 8,000 rpm, Spindle taper BT40, Spindle Motor 11kw, FANUC Oi-MC Control, Fedpfx Apou Hyuao Dspn 24 Station ATC, through spindle coolant.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2Y386M08141, Year of construction: 2023, operating hours: 964 h, load capacity: 1,200 kg, lifting height: 3,850 mm, fuel type: electric, mast type: simplex, construction height: 2,546 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fpodpfjznu Aaox Ap Dsn Load capacity: 1,200 kg Lifting height: 3,850 mm Mast type: Simplex ISO class: 2 Battery voltage: 24 V Battery type: Lithium-ion Drive motor power: 2 x 3.5 kW MACHINE DETAILS Overall height: 2,546 mm Unladen weight: 2,441 kg Minimum battery weight: 423 kg Maximum battery weight: 467 kg EQUIPMENT - Side shifter - 3rd valve External reference: SL18780

Condition: refurbished (used), Year of construction: 2016, operating hours: 2,423 h, load capacity: 2,000 kg, lifting height: 2,010 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,530 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 747 kg, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * Over 400 vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: Manufacturer: Jungheinrich Type: High-lift pallet truck EJD 220 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2016 Operating hours: 2,423 Lifting height: 2,010 mm Mast type: Duplex Initial lift: Yes Overall height: 1,530 mm Fork length: 1,200 mm Unladen weight: 747 kg Load center: 600 mm Tires: Polyurethane Model type: EJD 220 Fedpszdi Agjfx Ap Djpn Battery type: PzS Voltage: 24 V Battery weight: 293 kg

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, loading space length: 18,000 mm, loading space width: 2,540 mm, loading space height: 1,700 mm, total length: 18,000 mm, total width: 2,540 mm, total height: 1,700 mm, suspension: air, tire size: 435/50-R19.5, Equipment: ABS, - BPW axles - EBS - Lift axle - Air suspension - Disc brakes Available directly from stock: MAX200 with a flat loading ramp, lowered, capable of carrying up to 12,000 kg and vertically positionable, extendable by 4.5 m, equipped with a trailing steering axle and a lift axle: Technical data MAX200-N-3A-13.50-FTR-19.5-2.54 Total weight: 45,000 kg Coupling pressure: 18,000 kg Axle load: 27,000 kg Coupling height (loaded): 950–1050 mm Loading area length: 13,500 mm Extendable by: 4,500 mm Axle distance: 1360/1405 mm Vehicle overall width: 2,540 mm Total weight depends on coupling pressure. Loading area: Loading area in extendable design with pneumatic locking. The loading platform can be lowered hydraulically at the rear by approx. 2100 mm. Load capacity of the rear vehicle in horizontal position: 6 t. Lowered: Can be driven with an axle load of 12 t. 2 pairs of lashing points (LC 5000 daN). 1 pair of lashing points (LC 10000 daN). 6 pairs of lashing points that fold outwards (LC 5000 daN). 2 pairs of lashing points that fold outwards (LC 10000 daN). 1 pair of horizontal lashing points at the rear (LC 5000 daN). Recesses in the outer frame of the loading platform for attaching lashing straps (LC 2000 daN). Tire pressure monitoring system (TPMS) according to ECE R 141. BPW axles with disc brakes. Tires 435/50 R 19.5 Fodsz Hci Njpfx Ap Depn Options: • Red and yellow air couplings on the galvanized front connection plate. • 2 wheel chocks with holder. • Galvanized steel partition, approx. 1,600 mm high (approx. 35 kg), EN12642-XL • Loading area made of hardwood. • Hardwood floor on the hydraulic loading table. • 1 pair of aluminum ramps, type: VFR 105, 1,500 x 450 x 120 mm (L x W x H). • Holder for aluminum ramps under the ramp (approx. 88 kg). • 1 spare wheel holder under the loading area on the right. • Movable profile for attaching separate aluminum ramps at the rear of the semi-trailer. • Operating manual and description on a USB stick. • Holder for a rotating beacon at the rear, right and left of the vehicle. • Under the gooseneck and at the rear, on the left and right, a holder for warning signs with socket. • Electro-hydraulic unit (approx. 45 kg). • 6 pairs of recesses in the loading area floor for WADER container locks, for 1 x 20', 2 x 20', 1 x 40' or 1 x 45' container (approx. 90 kg). • 10 pairs of tubes for stanchions (approx. 100 x 50 mm) in the outer frame of the loading area floor (approx. 30 kg). • 3 pairs of stanchion profiles, mounted crosswise in the loading area floor, for stanchions (100 x 50 mm) (approx. 95 kg). • Galvanized widening elements, extendable by approx. 230 mm per side (approx. 262 kg). • Lift axle on the front axle, controlled by TEBS E depending on axle load and loading condition (± 69 kg). • 4 warning signs (width ± 423 x 423 mm), extendable by ± 400 mm, each with one LED position light (± 25 kg). • Rope hooks (8 mm), approx. 500 mm below the edge profile of the gooseneck and the loading area floor (± 2 kg). Axle configuration Tire size: 435/50-R19.5 Axle brand: BPW DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 3: Max. axle load: 9000 kg; Steered;...

Condition: new, Year of construction: 2026, For sawing, milling, planing/thicknessing, and optionally mortising in a confined space. High-precision format sliding table made of anodized aluminum, available in various lengths. Large outrigger (1200 x 650 mm) with a material support roller and extendable aluminum telescope fence up to a maximum of 3200 mm with professional fence flaps. Max. saw blade diameter 315 mm, swiveling from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° to the rear. Four milling speeds up to 10,000 min⁻¹, manually adjustable. With clockwise/counterclockwise rotation of the milling spindle. Heavily ribbed planing tables made of stress-free gray cast iron for decades of stability and flatness. 2-stage feed rate for thicknessing. Three independent industrial motors for continuous operation. With lockable main switch, motor protection switch. Fixed handwheels. Dimensions and Weights Weight (net) approx. 857 kg Planing Planing table width 410 mm Planing table length 2000 mm Maximum planing material removal 5 mm Dust extraction connection Dust extraction port diameter 3 x 120 mm Dust extraction port diameter saw blade guard 60 mm Installation Information Space requirement length 5960 mm Space requirement width/depth 5140 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area length 1600 mm Working area width/depth 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thicknessing table length 757 mm Thicknessing table width 423 mm Minimum working height (thicknessing) 3 mm Fpedpfx Apoih Dxle Djn Maximum working height (thicknessing) 230 mm Maximum material removal (thicknessing) 5 mm Electrical data Connection voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Duty cycle drive motor 40% Power drive motor 3 x 5.0 kW Sliding table and table Format sliding table length 2660 mm Format sliding table width 360 mm Format sliding table height 142 mm Table length 1250 mm Table width 430 mm Table height 900 mm Milling spindle Spindle inclination 0 – -45° Spindle arbor diameter 30 mm Usable length of the spindle 125 mm Spindle speed(s) 3500/6000/8000/10000 min⁻¹ Maximum milling tool diameter Maximum tool diameter, adjustable 210 mm Maximum tool diameter, adjustable 45° 150 mm Maximum tool diameter, mortising 275 mm Planing cutterhead Cutterhead type TERSA Cutterhead diameter 87 mm Number of planing knives 4 pcs Cutterhead speed 5200 min⁻¹ Circular saw unit Beside length 2600 mm Cutting width with parallel fence 900 mm Maximum crosscut width to the left of the saw blade 3260 mm Saw blade inclination 90 – 45° Maximum cutting height at 90° 90 mm Maximum cutting height at 45° 63 mm Maximum saw blade protrusion 90° 100 mm Maximum saw blade protrusion 45° 71 mm Diameter (main) saw blade 315 mm Explanation of diameter (main) saw blade: with scoring saw Speed (main) saw blade 4000 min⁻¹ Feed rate Feed rate 6 – 12 m/min Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 254 kW (345.34 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,458 kg, input voltage: 400 V, total width: 2,240 mm, total length: 3,050 mm, total height: 2,500 mm, warranty duration: 12 months, heating capacity: 186 kW (252.89 HP), Aircooled chiller/Heat pump YORK YMPA0260PE50 254 kW/186 kW Fedpfx Aszw Enfep Depn Cooling capacity: 254 kW / 72.22 tons (12/7 — 35°C) Heating capacity: 186 kW / 52.89 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module Refrigerant circuit: 4 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 6 pcs. COPELAND ZP143KCE-TFD-423 (scroll) + 1 pcs. HITACHI E855DH-80D2YG (scroll) + 1 pcs. HITACHI DC80PHDG-D1J2 (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo HED IE5 (Frequency inverter) Dimensions: 3.05x2.24x2.5 m. Weight: 2458 kg. Working hours: 0/0/0/0/0/0/0/0 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 159 kW (216.18 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,071 kg, input voltage: 400 V, total width: 2,240 mm, total length: 3,050 mm, total height: 2,500 mm, warranty duration: 12 months, heating capacity: 160 kW (217.54 HP), Aircooled chiller/Heat pump YORK YMPA0160PE50 159 kW/160 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 160 kW / 45.5 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module Refrigerant circuit: 3 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. COPELAND ZP143KCE-TFD-423 (scroll) + 1 pcs. HITACHI DC80PHDG-D1J2 (scroll, inverter) Type of refrigerant: R410a Number of fans: 3 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo (Frequency inverter) Dimensions: 3.05x2.24x2.5 m. Weight: 2071 kg. Working hours: 0/0/0/0/0 h. Condition: New Fpedpfx Apezwutdj Don CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 730 mm, turning diameter: 400 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS Travel in X-axis: 240 mm Travel in Z-axis: 640 mm Turning length: 730 mm Turning diameter: 400 mm Spindle speed: 4,000 rpm Spindle bore: 66 mm Fedpfx Ajz Ahybop Depn MACHINE DETAILS Control system: Siemens Machine weight, approx.: 5,500 kg EQUIPMENT Automatic tool changer (ATC) Tailstock Parts catcher

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to the precision unit and the heavy cast-iron construction Front steel infeed roller with helical gearing for optimal feed rate Fpjdpfx Aod Hx Hnop Den Satin-finished steel outfeed roller, optionally with a rubber roller in the outfeed The work table is mounted on four large columns, ensuring maximum stability under all working conditions. The thickness table adjustment is done via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard with two feed speeds, comfortably selectable from the operator's side Powerful industrial motor Stable steel and cast iron construction Equipment details: Work table Mounted on four large spindles, which ensure maximum stability under all working conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing Planer knife change in seconds Self-locking Particularly quiet Thickness table adjustment on S 41 elite s via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Dimensions and weights Length approx. 900 mm Width/Depth approx. 1070 mm Weight approx. 361 kg Dust extraction connection Dust extraction nozzle diameter for thicknessing 120 mm Drive power Main motor 5 kW Installation information Space requirement Length 1070 mm Space requirement Width/Depth 900 mm Space requirement Height 1100 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body Length 1040 mm Machine body Width/Depth 900 mm Length 3000 mm Width 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thickness table Length 423 mm Thickness table Width 775 mm Working height min. 3 mm Working height max. 240 mm Working length min. 180 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 95 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 410 mm Feed Speed 6/12 m/min

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 197510 € 3732.94 € 1010 mm 590 mm 1000 x 400 mm 1000 x 400 mm 0 -25 m/min 0 - 4000 mm/min 0,001 mm 450 mm 450 mm 0 - 3800 mm/min 0.001 mm 600 - 3600 1/min 11 kW 3675 mm 4055 mm 2480 mm 6500 kg 423 kg 670 kg 405 x 50 x 127 mm 2,4 / 3,9 kW 5.9 kW 0,005 mm 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel, with graphical dialog programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes with precision ball screws and AC servo motors A balancing system is attached to the spindle housing to reduce stress on the machine structure Full enclosure with lighting Electromagnetic chuck Coolant system 300 l/min with drum paper filter and magnetic separator Fjdpfsy Ubbfex Ap Depn Driven wheel dressing device mounted on the table, 1.7 kW, with double support, width 200 mm, diameter 35 or 52 mm Grinding wheel Grinding wheel flange Grinding wheel balancing scale Heat exchanger for the control cabinet Machine and equipment compliant with CE regulations Operating instructions in GERMAN or ENGLISH Accuracy standard ISO 1986-1 OPTIONS (prices on request): Linear encoders for Y and Z axes Oil mist collector

Condition: new, Year of construction: 2026, The BTS-Plastic Foil Compactor is the solution to keep large bulky packaging film under control. With its space-saving footprint and secure stand you can easily reduce all foil waste to a minimum of volume. The retaining ring in the plastic foil compactor prevents annoying expansion so that the foils stay where they belong. The filled bags can be baled by using a waste baler or disposed of in a recycling bin. By collecting and compacting this valuable and recyclable material you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Foil Compactor size: 1000 H x 450 W x 420 D mm Foil Compactor weight: 5.5 kg Foil Compactor colour: RAL 9006 silver Foil Compactor Bag volume: 240 Ltr. Foil Compactor Bag weight capacity: up to 15 kg Easy collecting the packaging films Clean and safe working environment Retaining ring prevents the annoying material expansion of the foils Optimum utilization of bags Fpjdsvbrfijpfx Ap Don Reduces frequency of waste collection A quality product “Made in Germany” Suitable for collecting and compacting Bulky packaging films and foils Foam foils Optional extras BTS-Foil Bags 240 Ltr. Plastic Foil Compactor colour RAL (minimum order 40 units) BTS-Waste Baler for plastic film and foils Plastic Film Compactor, Foil Compactor, Plastic Film Collector, Foil Collector, Sack Holder

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 48 V, total height: 630 mm, total length: 979 mm, total width: 434 mm, Tested forklift battery for your forklift - 48V 4PZS 500Ah - special battery tray + 1 year warranty + includes aquamatic system + includes final discharge cable & REMA 320 plug (other connectors can be installed on request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of delivery: 2024 Dimensions: Length 979 mm Width 434 mm Height 630 mm Weight: approx. 750 kg Suitable for the following models and others: Still R 20-14 Jungheinrich ETV A 12.5 Toyota 2FBE15 Toyota 5FBE15 Toyota 5FBE18 Toyota 7FBE10 Toyota 7FBE15 Toyota 7FBRE16 Toyota 8FBE15 Toyota 8FBE15T Toyota 8FBKT16 Toyota 8FBMT15 Toyota FTB15-E2S Toyota/BT RR-B 2 Toyota/BT RR-B 3 Toyota/BT RR-M 14 Toyota/BT RR-M 3 Toyota/BT RR-M 6 Toyota/BT RR-N 3 Fodpfx Apoy Rnkfo Dspn Crown 3.0 Crown SC 4220 Crown SC 5320-1 Crown SCT 6020 Atlet ET 150 Atlet ET 180 Balkancar EV698 CTC PLANET PL416/420/423 Caterpillar EP15CPDJ Caterpillar EP15PNT Caterpillar EPB4A Daewoo B13 Daewoo B13 T-2 Daewoo B15 Daewoo B15 T Daewoo B15 T-2 Daewoo B15 T-5 Daewoo BT15 Datsun 150 Doosan B13T Doosan B157-5 Doosan B15T-5 Doosan B15T-7 Doosan B20T-2 Heli CPD 15 Heli CPD 18 Heli CPD 25 Hubtex MQ 35 Hyster J1.80-2.00XMT Hyundai 15BT-7 Hyundai 15BT-9 Hyundai 16B-9 Hyundai 16B-9F Hyundai 20BRJ-7 Hyundai 25BRJ-7 Hyundai HBT18T-S Komatsu FB15-12 Komatsu FB15M-2 Komatsu FB18 Manitou ME 313 Manitou ME 315 Mitsubishi FB13PNT Mitsubishi FB15PN Nichiyu FBT13 Nichiyu FBT15-30 Nichiyu FBT18 Nichiyu FBT20PN Nissan 01L150 Nissan 1N1 TX Nissan 1N1L18HQ Nissan 1N1L18Q Nissan A1N1L18Q Nissan N01L150 Nissan N01L15U Nissan TX15 Nissan TX18 Nuova Detas SE 315 OMG ERGAS 16 TA 4 TCM FTB18-E1 UniCarriers TX3-15S Yale ERP 16 ATF Yale ERP 18 ATF Common battery sizes available – please inquire. Transport possible.

Condition: new, Siemens Sinumerik 6FC5303-0AF50-3BB0 machine control panel MCP 466C-M IE FS: A, SN: T-ED6102065, unused, 100% functional, scope of delivery as per photos. Fpsdox Eutiepfx Ap Djn

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 610555, travel distance X-axis: 610 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 6,000 rpm, controller manufacturer: Fanuc, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 610 mm Travel Y-axis: 460 mm Travel Z-axis: 510 mm Fedpfxoy Rxu Uo Ap Depn Spindle speed: 60 - 6,000 rpm Tool holder: BT40 Table length: 950 mm Table width: 560 mm MACHINE DETAILS Control: CNC Control system brand: Fanuc Power: 7.5 kW Number of axes: 3 pcs. Dimensions & Weight Dimensions (L x W x H): 2100 x 2600 x 2600 mm Weight: 3,800 kg Shipping units: 1 pc.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 063/09, thread length: 50 mm, workpiece diameter (max.): 6 mm, SMART MACHINERY NG S-DD Thread Rolling Machine Fully operational, currently in production. Year: 2009 Incoterm: EXW Calolziocorte (LC) The machine automatically sets up for stroke change. The NG S-DD thread rolling machine is equipped for changing the ram stroke depending on the length of the comb used. Fpedpfx Apoyycr Nj Don Minimum pass-through diameter: 1 mm. Maximum pass-through diameter: 6 mm. Maximum threaded length: 50 mm. Maximum rivet length: 80 mm. Maximum output: 700 pcs/min. Main motor power: 13.9 kW Installed electric power: 16 kW

Condition: used, Electric motor, three-phase motor Fpsdpfecf Dh Eox Ap Den -Power: 0.75 kW -Speed: 1440 rpm -Wave SW: 17 mm -Construction: B3 -Protection class: EX -Dimensions: 423/290/H240 mm -Weight: 27 kg

Condition: good (used), Central unit, control system, switchgear, CPU, PLC -Manufacturer: B&R Bernecker & Rainer, Minicontrol with Control Panel -Product number: MCGE33-0 -Individual components: see photos Fodpfx Asgypu Sop Djpn -Overall dimensions: 255/130/H220 mm -Weight: 2.3 kg

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: FL MC 10/100BASE-T/FO G1300 ST -Price: per piece -Number: 6 piece -Dimensions: 100/20/H120 mm Fedpsf Rum Eefx Ap Djpn -Weight: 0.1 kg/piece