Used Makor Dora/4 for sale (58,618)

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Kljdofdkb Tepfx Apdju - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm Kljdpfod Tbbdex Apdou - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Kljded Tqalspfx Apdju - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) Klsdpeguk A Hofx Apdeu - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm Kljdpfxofdkb Ue Apdsu - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: Kljdpfx Apjfdkbhedsu 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Kedeguk Dkopfx Apdjlu - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: Kjdpeguk Dvsfx Apdelu - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 42,000 h, functionality: fully functional, overall weight: 3,315 kg, total length: 3,200 mm, total width: 1,630 mm, total height: 1,960 mm, motor manufacturer: Siemens, power: 236 kW (320.87 HP), volume flow: 3,013 m³/h, operating pressure: 4 bar, noise level: 77 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 1 unit Low-Pressure Screw Compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3,013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3,630 rpm Speed control: with integrated frequency converter Cooling: Water-cooled with stainless steel shell-and-tube heat exchanger FUNKE 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Kljdpfoywr Tkox Apdeu Dimensions Length: 3,200 mm Width: 1,630 mm Height: 1,960 mm Weight: 3,315 kg Also available: Cyclone Afterseparator Manufacturer: BZ Zyklone Model: 175 (stainless steel) Condensate drain Bekomat Shell-and-Tube Heat Exchanger Manufacturer: Funke Model: A100 805-6-1Pass Material: Stainless steel 2x Rubber Expansion Joints 1x Intermediate Flap Valve DN 150 with Auma Actuator SG 05.1 F07 1x Cooling Water Control Valve Samson 3274 DN 50 PN 16 1x Steel Pipe DN 150 with 2x 90° bends

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, power: 2 kW (2.72 HP), filling opening width: 1,250 mm, filling opening length: 1,000 mm, overall weight: 1,300 kg, Technical data: Hopper opening: length x width 1250 x 1000 mm Length x width: 1250 x 1000 mm Cutting unit opening: 562 x 462 mm Feed opening: 1250 x 1000 mm Kljdpfx Aeyma Tijpdsu Length x width: 562 x 462 mm Number of shafts: 4 pcs of which: cutting shafts 2 pcs cleaning shafts 2 pcs Number of cutting discs: 23 Shaft speed: 25 rpm.

Condition: new, SALES FROM STOCK Loading Capacity: 240 kg Max Platform Height: 4 m Occupants: 1 Platform Dimension: 1.15 x 0.6 m Overall Length: 1.32 m Overall Width: 0.76 m Overall Height: 1.92 m Platform Extension: 0.55 m Extension Load: 100 kg Ksdpfx Apoulah Nodjlu Up/Down Speed: 34/25 sec Turning Radius: 0 Maximum Slope: 1.5°/2° Drive Tyres: 230 x 80 mm Gradeability: 25% Wheel Base: 1.0 m Travel Speed (Stowed): 4 km/h Travel Speed (Raised): 0.5 km/h Battery: 2 x 12 V / 100 Ah Lifting Motor: 24 V / 1.3 kW Drive Motors: 24 V / 0.5 kW Charger: 24 V / 15 A Weight: 660 kg Proportional Controls Automatic Pothole Protection Drivable At Full Height Non-Marking Tyres Automatic Brake System Emergency Lowering System Emergency Stop Button Cylinder Holding Valve Onboard Diagnostic System

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: NR: 220.10.029.19, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, High-quality Format4 Tempora 60.06 EL edgebander for sale – ready to work! Take your production to the next level with this lightly used Format4 Tempora 60.06 EL edgebander in excellent condition. Built for industrial performance, this machine delivers outstanding precision and a flawless finish on every panel. - High-precision automatic edge banding Kodpfx Apsy Dg N Tjdolu - Pre-milling unit for perfect edge preparation - Reliable, consistent gluing system - Complete processing: trimming, milling, polishing - Easy operation and dependable performance Included extras: - Red air tank (as shown in the photos) - Additional heated glue pot – ideal for quick switching between different glue colors Carefully maintained, lightly used, and fully operational – ready to be put straight into production. The machine is available due to factory restructuring. Contact us for more details or to arrange a viewing.

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg Klsdpfx Apjl Dw Nxsdsu cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: refurbished (used), functionality: fully functional, We offer 4 pieces of Schlick turbines – 320 mm, including 7.5 kW motors. Turbines: Schlick ROTO-JET RB500 5.2/4/7.5. Turbine type – 5.2. Abrasive delivery – 140 kg/min. Abrasive outlet speed – 70 m/sec. Turbines after complete overhaul, fitted with original spare parts. Shot blasting, blasting wheel, sandblasting machine. PRICE PER PIECE – 3000 EUR. Kodpfx Apovphf Usdjlu

Condition: excellent (used), Year of construction: 1995, still preserved CNC because little in use was used for door production , but can be used for any purpose . Double table, can be mounted from left and right side Kedpeig T Epefx Apdjlu 4 axes x 5000 mm y 1350 mm z 450 mm a 190° main spindle SK 40 8 kw water cooled up to 17 000 rpm chain magazine with 24 places

Condition: like new (used), Year of construction: 2013, functionality: fully functional, overall weight: 500 kg, MAKOR TF/P PLUS Putty Application Machine 19.06.6512 Type: TF/P Plus Maximum working width: 150 mm Maximum height: 120 mm Feed speed adjustable up to 140 m/min Top powered pressure rollers x 6 Pneumatic pressure adjustment Bottom driven rollers x 6 CE mark Year of manufacture: 2013 Product description: - Paint without waste – Verniciatura senza sprechi - Robust and efficient transport system featuring 6 motor-driven pressure units. - Various application heads ensure optimal results even for filling and defect repair materials. Designed for continuous cycle application of putty, gypsum, and paint onto mouldings, picture frames, and extruded profiles using a suitably shaped steel counter-template. The frame is made of steel sheet and tubular steel. Guaranteed forward feed via 6 lower metal rollers and 6 upper pressure wheels made of rubber, with variable speed control by inverter. Klodpfoytc Rkjx Apdeu The upper pressure wheels are mounted on free-running bearings to minimize improper wear. The pneumatic control panel is equipped with a selector for engaging the upper pressure wheels and independent pressure regulators.

Condition: used, Year of construction: 2006, overall weight: 1,200 kg, Crosscut saw. Strip cutting machine MAKOR SAP 30 Kedpfx Apoytc Ivjdelu The machine is perfectly suited for cutting wooden and MDF strips. Year of manufacture: 2006

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Ksdpfjtp I S Ajx Apdjlu

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,150 kg, load capacity per storage section: 3,050 kg, total length: 22,800 mm, total height: 3,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 22,800 mm, 4 double-bay pallet racks (M35112711-3) Each 5.7 m long, 3.5 m high, 1.1 m deep, Each with 2 bays, 2.7 m wide, Each with 3 beam levels, shelf load capacity 3000 kg. - 12 frames (RM3511 - RAL5019) - 24 base plates, shim material, fastening material Kledpfx Aeyz Iccjpdsu - 48 floor anchors (ZZBA1210) - 48 single beams (T2711 - RAL2008) - 4 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 20 working days after receipt of payment - Delivered free to site/installation location - Unloading from the truck to be carried out by the buyer using their own lifting equipment - Deliveries available throughout the Federal Republic of Germany (except islands); deliveries to EU countries upon individual agreement.

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Klodpfxsxbfutj Apdeu

Condition: good (used), Manufacture: ALLOYD Tip: 4 seec Kjdpfeuhn Dijx Apdjlu Turntable

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,265 mm, travel distance Z-axis: 120 mm, saw blade diameter: 120 mm, Equipment: CE marking, Dismantling and loading can be handled by the seller! TECHNICAL DETAILS Working area X: 3,250 mm Working area Y: 1,265 mm Working area Z: 120 mm Tool holder: HSK-F63 Tool changer: 10 positions, mounted on the milling head Drilling and sawing units Vertical drilling spindles: 12 Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Groove milling unit X-direction: 1 Saw blade diameter: 120 mm Table system Pod and rail table: available Consoles: 6 Klsdpfxeyddqms Apdsu MACHINE DETAILS Drive data Main motor power: 9.2 kW Total connected load: 15 kW Vacuum pump capacity: 100 m³/h EQUIPMENT Positioning aid Safety mat Digital LED display on the consoles Auxiliary device for tool change Two rows of stops Workpiece supports Handheld control device Pendulum processing CE marking

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, pallet spaces: 108 euro pallets, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, Kljdpfsv Ukz Aex Apdsu each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: used, Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, We offer this used FORMAT-4 PROFIT H200R 13.33 throughfeed machining centre, year of manufacture 2022. Type: PROFIT H200R 13.33 Serial number: 30B.05.067.22 Code: 9417 Rated voltage: 400.0 V Number of phases: 3P+N Frequency: 50/60 Hz Rated current: 40.0 A Power: 18.0 kW Year of manufacture: 2022 Klodpfx Apoyvtq Usdeu Control voltage: 24 VDC Minimum protection fuse: 32 A Maximum protection fuse: 50 A Minimum compressed air supply: 8 bar Air consumption: 350 Nl/min If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. Kledpfxotqu Dis Apdeu CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.