Used Marchesini Dumek Melter for sale (80)

Condition: used, Power Control Pc 22 Panel height 60 mm Solid wood mm 20 Pvc / Abs mm 3 Feed speed up to mt / min 24 Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Panel support guide Side roller conveyor with idle wheels for panel support Grinding group Lamps to heat the edge of the panel 6-position reel holder magazine with automatic edge change from C.N. Lsdpfogiyn Ijx Aqvohg Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Overlapping trimming unit with 2 motors Gluing unit with 2 tilting motors electronically adjustable by C.N. Multifunction 4-motor rounding unit (gleaner + rounder) with numerical control adjustment in automatic Free space for the possible insertion of another work group Edge scraper group Oscillating brush group

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Lhsdpfx Ast Hal Dsqveg Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Ljdpfxjugpwno Aqvehg Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: excellent (used), Year of construction: 2017, operating hours: 10 h, functionality: fully functional, machine/vehicle number: VT100-4EFXX6/EALWXDKCXXXXXXXXXXXXXXXXXXXXX, We are offering a 2017 Nordson Versa Blue 100 Ltr. The unit is unused and in like-new condition. It has never been used in production. The device features two hose connections and two gear pumps! Customizable to your requirements. Immediately available. VT100-4EFXX6/EALWXDKC Lhodpfxowwid Hj Aqvsg Hotmelt adhesive melter: - Pumps – 2 gear pumps - Tank capacity – approx. 100 kg; - Temperature sensor – Ni120; - Operating temperature – 40 ÷230 °C; - Power supply – 400 V/3 phases; - Outlets for 2 hoses; For any questions, feel free to contact us.

Condition: new, Year of construction: 2024, functionality: fully functional, High-performance drum melter, special version with control cabinet mounted at the rear of the drum. FS200 fitted with a ZP40 pump. High-performance melting plate (melting capacity approx. 130 kg/h, residual quantity approx. 4.5 kg) – adhesive-dependent Two-hand control for plunger movement. Lhodpfxswzg Tyo Aqvjg Drum ventilation via pneumatic valve. Drum venting via pneumatic cylinder. Drum centering suitable for steel drums d=572mm External setpoint (0–10V) 2 heating circuits for plunger 1 heating circuit for gear pump 2 heating circuits for hose 2 heating circuits for applicator head Control: B&R PLC Pressure sensor for overpressure safety and regulation Pump control via frequency inverter Technical data: Device voltage: 3x400V AC+N+PE Frequency: 50–60Hz Heating zones: 7 Temperature range: 20–200°C Container: 200-liter standard container d=572mm Connected load: approx. 35 kW Heating capacity: approx. 26 kW Control voltage: 24V DC Pneumatic connection: 6 bar Machine dimensions (WxHxD): 1090 x 2301.2 x 1090 mm (please note) Individual adjustments are possible upon customer request!